* chapter setup with subtitle in margin
@ 2018-01-23 21:31 Henning Hraban Ramm
2018-01-24 18:20 ` Henning Hraban Ramm
0 siblings, 1 reply; 6+ messages in thread
From: Henning Hraban Ramm @ 2018-01-23 21:31 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1: Type: text/plain, Size: 607 bytes --]
Hi again,
I have this nice/complicated chapter setup (see attachments):
Chapter title Chapter subtitle
can have several lines in margin
smaller font
Three problems I cannot get rid of:
- There’s always an indent in front of the title (red box); it should not.
- The subtitle should start on the same line as the main title.
- The subtitle should have an appropriate line spacing.
Please, I’m running out of time...
Greetlings, Hraban
---
http://www.fiee.net
http://wiki.contextgarden.net
GPG Key ID 1C9B22FD
[-- Attachment #2: marginsubtitle.tex --]
[-- Type: application/octet-stream, Size: 2768 bytes --]
% chapter titling should look like:
%
% Chapter title subtitle
% subtitle
% in the margin
%
% here starts the text
%
%
% table of contents should look like:
% Author Name
% Chapter title 123
% subtitle
\usemodule[visual]
\setuplayout[
backspace=21mm,
topspace=12mm,
width=117mm,
height=270mm,
header=15mm,
headerdistance=2mm,
footer=5mm,
footerdistance=4mm,
rightmargindistance=5mm,
rightmargin=55mm,
leftmargindistance=5mm,
leftmargin=55mm,
%leftmargin=0mm,
outermargindistance=5mm,
outermargin=55mm,
innermargin=0mm,
grid=yes,
location=doublesided,
]
\setuppagenumbering[alternative=doublesided]
\setupalign[flushleft,hz,hanging]
\definebodyfontenvironment[9pt][interlinespace=4mm]
\definebodyfontenvironment[12pt][interlinespace=5mm]
\setupbodyfontenvironment[default][em=italic]
\definehighlight[emph][style=\em]
\definefont[ChapterTitleFont][Serif at 28pt][10mm]
\definefont[SectionTitleFont][Serif at 10pt][4mm]
\setupindenting[yes, 2.5em, first] %, next]
\setuphead[
align={flushleft,nothyphenated},
tolerance=verytolerant,
grid=line,
number=no]
\setupheadertexts[][part]
\define[2]\PartCmd{\relax} % part is only used as rubric
\setuphead[part][
placehead=yes,
location=none,
page=no,
number=no,
command=\PartCmd,
]
\define[2]\ChapterCmd{%
\inouter{\framed[frame=off,align=flushleft]{%
%\startlinecorrection
\switchtobodyfont[rm,12pt] % interlinespacing should also adapt
\structureuservariable{subtitle}}%
%\stoplinecorrection
}
\framed[width=\textwidth,frame=off,align=flushleft]{\ChapterTitleFont #2}
}
\setuphead[chapter][
page=right,
style={\ChapterTitleFont},
interlinespacing=10mm,
grid=both,
before={},
%after={\inouter{\structureuservariable{subtitle}}},
command=\ChapterCmd,
]
\setuphead[section][
page=no,
style={\tf},
before={\blank[small]\testpage[4]},
after={\blank[small]},
]
% Table of contents
\define[1]\ChapterTocEntry{%
\doifnotempty{%
\structureuservariable{author}%
}{%
\structureuservariable{author}\crlf%
}#1\doifnotempty{%
\structureuservariable{subtitle}%
}{%
\crlf\structureuservariable{subtitle}%
}%
}
\setuplist[chapter][%
margin=2em,
textcommand=\ChapterTocEntry]
\starttext
\startpart[title={My Rubric}]
\dorecurse{3}{
\startchapter[title={C \fakewords{2}{10}}]%
[subtitle={S \fakewords{5}{10}},author={A\fakewords{2}{3}}]
\fakewords{10}{100}
\dorecurse{3}{
\startsection[title={S \fakewords{1}{10} \recurselevel}]
\fakewords{10}{300}
\stopsection}
\stopchapter}
\stoppart
\placelist[part,chapter][criterium=all]
\stoptext
[-- Attachment #3: margintitle.png --]
[-- Type: image/png, Size: 29791 bytes --]
[-- Attachment #4: Type: text/plain, Size: 492 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: chapter setup with subtitle in margin
2018-01-23 21:31 chapter setup with subtitle in margin Henning Hraban Ramm
@ 2018-01-24 18:20 ` Henning Hraban Ramm
2018-01-24 18:25 ` Aditya Mahajan
0 siblings, 1 reply; 6+ messages in thread
From: Henning Hraban Ramm @ 2018-01-24 18:20 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1: Type: text/plain, Size: 591 bytes --]
Am 2018-01-23 um 22:31 schrieb Henning Hraban Ramm <texml@fiee.net>:
> I have this nice/complicated chapter setup (see attachments):
> Three problems I cannot get rid of:
>
> - There’s always an indent in front of the title (red box); it should not.
> - The subtitle should start on the same line as the main title.
> - The subtitle should have an appropriate line spacing.
I could solve the subtitle placement with layers.
But the chapter title still has this indent. :-(
Greetlings, Hraban
---
http://www.fiee.net
http://wiki.contextgarden.net
GPG Key ID 1C9B22FD
[-- Attachment #2: marginsubtitle.tex --]
[-- Type: application/octet-stream, Size: 3154 bytes --]
% chapter titling should look like:
%
% Chapter title subtitle
% subtitle
% in the margin
%
% here starts the text
%
%
% table of contents should look like:
% Author Name
% Chapter title 123
% subtitle
\usemodule[visual]
\setuplayout[
backspace=21mm,
topspace=12mm,
width=117mm,
height=270mm,
header=15mm,
headerdistance=2mm,
footer=5mm,
footerdistance=4mm,
rightmargindistance=5mm,
rightmargin=55mm,
leftmargindistance=5mm,
leftmargin=55mm,
%leftmargin=0mm,
outermargindistance=5mm,
outermargin=55mm,
innermargin=0mm,
grid=yes,
location=doublesided,
]
\setuppagenumbering[alternative=doublesided]
\setupalign[flushleft,hz,hanging]
\definebodyfontenvironment[9pt][interlinespace=4mm]
\definebodyfontenvironment[12pt][interlinespace=5mm]
\setupbodyfontenvironment[default][em=italic]
\definehighlight[emph][style=\em]
\definefont[ChapterTitleFont][Serif at 28pt][10mm]
\definefont[SectionTitleFont][Serif at 10pt][4mm]
\setupindenting[yes, 2.5em, first] %, next]
\definelayer[rightmargin][
x=122mm,y=5mm,
width=\outermarginwidth,height=\textheight]
\setupbackgrounds[text][background=rightmargin,state=start]
\setuphead[
align={flushleft,nothyphenated},
tolerance=verytolerant,
grid=line,
number=no]
\setupheadertexts[][part]
\define[2]\PartCmd{\relax} % part is only used as rubric
\setuphead[part][
placehead=yes,
location=none,
page=no,
number=no,
command=\PartCmd,
]
\startsetups Subtitle
\switchtobodyfont[rm,12pt]
\stopsetups
\define[2]\ChapterCmd{%
\framed[width=\textwidth,frame=off,align=flushleft,style=\ChapterTitleFont]{#2}% without framed it’s a hbox?
\setlayerframed[rightmargin]%
[frame=off,width=\outermarginwidth,y=0mm,setups=Subtitle,align=flushleft]%
{\structureuservariable{subtitle}}
}
\setuphead[chapter][
page=right,
style={\ChapterTitleFont},
interlinespacing=10mm,
grid=both,
before={},
command=\ChapterCmd,
]
\setuphead[section][
page=no,
style={\tf},
before={\blank[small]\testpage[4]},
after={\blank[small]},
]
% Table of contents
\define[1]\ChapterTocEntry{%
\doifnotempty{%
\structurelistuservariable{author}%
}{%
\structurelistuservariable{author}\crlf%
}#1\doifnotempty{%
\structurelistuservariable{subtitle}%
}{%
\crlf\structurelistuservariable{subtitle}%
}%
}
\setuplist[chapter][%
margin=2em,
textcommand=\ChapterTocEntry]
\starttext
\placelist[part,chapter][criterium=all]
\startpart[title={My Rubric}]
\dorecurse{3}{
\startchapter[title={C \fakewords{2}{10}}]%
[subtitle={S \fakewords{5}{10}},author={A\fakewords{2}{3}}]
\fakewords{10}{100}
\dorecurse{3}{
\startsection[title={S \fakewords{1}{10} \recurselevel}]
\fakewords{10}{300}
\stopsection}
\stopchapter}
\startchapter[title={Without author and subtitle}]
\input zapf
\stopchapter
\stoppart
\stoptext
[-- Attachment #3: chapter.png --]
[-- Type: image/png, Size: 27856 bytes --]
[-- Attachment #4: Type: text/plain, Size: 492 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: chapter setup with subtitle in margin
2018-01-24 18:20 ` Henning Hraban Ramm
@ 2018-01-24 18:25 ` Aditya Mahajan
2018-01-24 22:00 ` Henning Hraban Ramm
0 siblings, 1 reply; 6+ messages in thread
From: Aditya Mahajan @ 2018-01-24 18:25 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1: Type: text/plain, Size: 978 bytes --]
On Wed, 24 Jan 2018, Henning Hraban Ramm wrote:
> Am 2018-01-23 um 22:31 schrieb Henning Hraban Ramm <texml@fiee.net>:
>
>> I have this nice/complicated chapter setup (see attachments):
>> Three problems I cannot get rid of:
>>
>> - There’s always an indent in front of the title (red box); it should not.
>> - The subtitle should start on the same line as the main title.
>> - The subtitle should have an appropriate line spacing.
>
> I could solve the subtitle placement with layers.
>
> But the chapter title still has this indent. :-(
Untested, but you have two spurious spaces in your code
\define[2]\ChapterCmd{%
\inouter{\framed[frame=off,align=flushleft]{%
%\startlinecorrection
\switchtobodyfont[rm,12pt] % <-- Here. Remove space before %
\structureuservariable{subtitle}}%
%\stoplinecorrection
}% << HERE: % was missing
\framed[width=\textwidth,frame=off,align=flushleft]{\ChapterTitleFont
#2}
}
Aditya
[-- Attachment #2: Type: text/plain, Size: 492 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: chapter setup with subtitle in margin
2018-01-24 18:25 ` Aditya Mahajan
@ 2018-01-24 22:00 ` Henning Hraban Ramm
2018-01-25 7:10 ` Mikael P. Sundqvist
0 siblings, 1 reply; 6+ messages in thread
From: Henning Hraban Ramm @ 2018-01-24 22:00 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1: Type: text/plain, Size: 1563 bytes --]
Am 2018-01-24 um 19:25 schrieb Aditya Mahajan <adityam@umich.edu>:
> On Wed, 24 Jan 2018, Henning Hraban Ramm wrote:
>
>> Am 2018-01-23 um 22:31 schrieb Henning Hraban Ramm <texml@fiee.net>:
>>
>>> I have this nice/complicated chapter setup (see attachments):
>>> Three problems I cannot get rid of:
>>>
>>> - There’s always an indent in front of the title (red box); it should not.
>>> - The subtitle should start on the same line as the main title.
>>> - The subtitle should have an appropriate line spacing.
>>
>> I could solve the subtitle placement with layers.
>>
>> But the chapter title still has this indent. :-(
>
> Untested, but you have two spurious spaces in your code
>
> \define[2]\ChapterCmd{%
> \inouter{\framed[frame=off,align=flushleft]{%
> %\startlinecorrection
> \switchtobodyfont[rm,12pt] % <-- Here. Remove space before %
> \structureuservariable{subtitle}}%
> %\stoplinecorrection
> }% << HERE: % was missing
> \framed[width=\textwidth,frame=off,align=flushleft]{\ChapterTitleFont #2}
> }
Thank you, but those existed only in an old version.
Current is:
\define[2]\ChapterCmd{%
\framed[width=\textwidth,frame=off,align=flushleft,style=\ChapterTitleFont]{#2}% without framed it’s a hbox?
\setlayerframed[rightmargin]%
[frame=off,width=\outermarginwidth,y=0mm,setups=Subtitle,align=flushleft]%
{\structureuservariable{subtitle}}%
}
And the indent is still there.
Greetlings, Hraban
---
http://www.fiee.net
http://wiki.contextgarden.net
GPG Key ID 1C9B22FD
[-- Attachment #2: marginsubtitle.tex --]
[-- Type: application/octet-stream, Size: 3156 bytes --]
% chapter titling should look like:
%
% Chapter title subtitle
% subtitle
% in the margin
%
% here starts the text
%
%
% table of contents should look like:
% Author Name
% Chapter title 123
% subtitle
\usemodule[visual]
\setuplayout[
backspace=21mm,
topspace=12mm,
width=117mm,
height=270mm,
header=15mm,
headerdistance=2mm,
footer=5mm,
footerdistance=4mm,
rightmargindistance=5mm,
rightmargin=55mm,
leftmargindistance=5mm,
leftmargin=55mm,
%leftmargin=0mm,
outermargindistance=5mm,
outermargin=55mm,
innermargin=0mm,
grid=yes,
location=doublesided,
]
\setuppagenumbering[alternative=doublesided]
\setupalign[flushleft,hz,hanging]
\definebodyfontenvironment[9pt][interlinespace=4mm]
\definebodyfontenvironment[12pt][interlinespace=5mm]
\setupbodyfontenvironment[default][em=italic]
\definehighlight[emph][style=\em]
\definefont[ChapterTitleFont][Serif at 28pt][10mm]
\definefont[SectionTitleFont][Serif at 10pt][4mm]
\setupindenting[yes, 2.5em, first] %, next]
\definelayer[rightmargin][
x=122mm,y=5mm,
width=\outermarginwidth,height=\textheight]
\setupbackgrounds[text][background=rightmargin,state=start]
\setuphead[
align={flushleft,nothyphenated},
tolerance=verytolerant,
grid=line,
number=no]
\setupheadertexts[][part]
\define[2]\PartCmd{\relax} % part is only used as rubric
\setuphead[part][
placehead=yes,
location=none,
page=no,
number=no,
command=\PartCmd,
]
\startsetups Subtitle
\switchtobodyfont[rm,12pt]%
\stopsetups
\define[2]\ChapterCmd{%
\framed[width=\textwidth,frame=off,align=flushleft,style=\ChapterTitleFont]{#2}% without framed it’s a hbox?
\setlayerframed[rightmargin]%
[frame=off,width=\outermarginwidth,y=0mm,setups=Subtitle,align=flushleft]%
{\structureuservariable{subtitle}}%
}
\setuphead[chapter][
page=right,
style={\ChapterTitleFont},
interlinespacing=10mm,
grid=both,
before={},
command=\ChapterCmd,
]
\setuphead[section][
page=no,
style={\tf},
before={\blank[small]\testpage[4]},
after={\blank[small]},
]
% Table of contents
\define[1]\ChapterTocEntry{%
\doifnotempty{%
\structurelistuservariable{author}%
}{%
\structurelistuservariable{author}\crlf%
}#1\doifnotempty{%
\structurelistuservariable{subtitle}%
}{%
\crlf\structurelistuservariable{subtitle}%
}%
}
\setuplist[chapter][%
margin=2em,
textcommand=\ChapterTocEntry]
\starttext
\placelist[part,chapter][criterium=all]
\startpart[title={My Rubric}]
\dorecurse{3}{
\startchapter[title={C \fakewords{2}{10}}]%
[subtitle={S \fakewords{5}{10}},author={A\fakewords{2}{3}}]
\fakewords{10}{100}
\dorecurse{3}{
\startsection[title={S \fakewords{1}{10} \recurselevel}]
\fakewords{10}{300}
\stopsection}
\stopchapter}
\startchapter[title={Without author and subtitle}]
\input zapf
\stopchapter
\stoppart
\stoptext
[-- Attachment #3: Type: text/plain, Size: 492 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: chapter setup with subtitle in margin
2018-01-24 22:00 ` Henning Hraban Ramm
@ 2018-01-25 7:10 ` Mikael P. Sundqvist
2018-01-25 10:44 ` Henning Hraban Ramm
0 siblings, 1 reply; 6+ messages in thread
From: Mikael P. Sundqvist @ 2018-01-25 7:10 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 2423 bytes --]
On Wed, Jan 24, 2018 at 11:00 PM, Henning Hraban Ramm <texml@fiee.net>
wrote:
> Am 2018-01-24 um 19:25 schrieb Aditya Mahajan <adityam@umich.edu>:
>
> > On Wed, 24 Jan 2018, Henning Hraban Ramm wrote:
> >
> >> Am 2018-01-23 um 22:31 schrieb Henning Hraban Ramm <texml@fiee.net>:
> >>
> >>> I have this nice/complicated chapter setup (see attachments):
> >>> Three problems I cannot get rid of:
> >>>
> >>> - There’s always an indent in front of the title (red box); it should
> not.
> >>> - The subtitle should start on the same line as the main title.
> >>> - The subtitle should have an appropriate line spacing.
> >>
> >> I could solve the subtitle placement with layers.
> >>
> >> But the chapter title still has this indent. :-(
> >
> > Untested, but you have two spurious spaces in your code
> >
> > \define[2]\ChapterCmd{%
> > \inouter{\framed[frame=off,align=flushleft]{%
> > %\startlinecorrection
> > \switchtobodyfont[rm,12pt] % <-- Here. Remove space before %
> > \structureuservariable{subtitle}}%
> > %\stoplinecorrection
> > }% << HERE: % was missing
> > \framed[width=\textwidth,frame=off,align=flushleft]{\ChapterTitleFont
> #2}
> > }
>
> Thank you, but those existed only in an old version.
> Current is:
>
> \define[2]\ChapterCmd{%
> \framed[width=\textwidth,frame=off,align=flushleft,style=\ChapterTitleFont]{#2}%
> without framed it’s a hbox?
> \setlayerframed[rightmargin]%
> [frame=off,width=\outermarginwidth,y=0mm,setups=
> Subtitle,align=flushleft]%
> {\structureuservariable{subtitle}}%
> }
>
> And the indent is still there.
>
>
> Greetlings, Hraban
> ---
> http://www.fiee.net
> http://wiki.contextgarden.net
> GPG Key ID 1C9B22FD
>
> ____________________________________________________________
> _______________________
> If your question is of interest to others as well, please add an entry to
> the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/
> listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://context.aanhet.net
> archive : https://bitbucket.org/phg/context-mirror/commits/
> wiki : http://contextgarden.net
> ____________________________________________________________
> _______________________
>
I think you can get rid of that horizontal space by adding "offset=overlay"
to the framed environment used in your \ChapterCmd.
/Mikael
[-- Attachment #1.2: Type: text/html, Size: 3871 bytes --]
[-- Attachment #2: Type: text/plain, Size: 492 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: chapter setup with subtitle in margin
2018-01-25 7:10 ` Mikael P. Sundqvist
@ 2018-01-25 10:44 ` Henning Hraban Ramm
0 siblings, 0 replies; 6+ messages in thread
From: Henning Hraban Ramm @ 2018-01-25 10:44 UTC (permalink / raw)
To: mailing list for ConTeXt users
Am 2018-01-25 um 08:10 schrieb Mikael P. Sundqvist <mickep@gmail.com>:
> I think you can get rid of that horizontal space by adding "offset=overlay" to the framed environment used in your \ChapterCmd.
Thank you so much! That helped.
Greetlings, Hraban
---
http://www.fiee.net
http://wiki.contextgarden.net
GPG Key ID 1C9B22FD
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2018-01-25 10:44 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-01-23 21:31 chapter setup with subtitle in margin Henning Hraban Ramm
2018-01-24 18:20 ` Henning Hraban Ramm
2018-01-24 18:25 ` Aditya Mahajan
2018-01-24 22:00 ` Henning Hraban Ramm
2018-01-25 7:10 ` Mikael P. Sundqvist
2018-01-25 10:44 ` Henning Hraban Ramm
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).