* Commutative diagrams in tikz-cd: for wiki
@ 2013-05-25 22:40 Idris Samawi Hamid ادريس سماوي حامد
2014-02-28 20:06 ` Florêncio Neves
0 siblings, 1 reply; 2+ messages in thread
From: Idris Samawi Hamid ادريس سماوي حامد @ 2013-05-25 22:40 UTC (permalink / raw)
To: ntg-context; +Cc: Florêncio Neves, Mojca Miklavec
[-- Attachment #1: Type: text/plain, Size: 1650 bytes --]
Dear gang,
With a couple of modifications I got tikz-cd (a package to make
commutative diagrams for categories and toposes etc. by Florêncio Neves)
working in mkiv:
http://texdoc.net/texmf-dist/doc/latex/tikz-cd/tikz-cd-doc.pdf
It depends on the tikz module, already supported in mkiv.
The tikz-cd module is attached, and here is a sample file:
===============
\usemodule[tikz]
\usetikzlibrary{commute}
\starttext
\starttikzcd %[ampersand replacement=\&]
A \arrow{rd} \arrow[yshift=0.5ex]{r}{\phi} \& B \\
\& C
\stoptikzcd
\starttikzcd %[ampersand replacement=\&]
A
\arrow[yshift=1.5ex]{r}
\arrow[yshift=0.0ex]{r}
\& B \arrow[xshift=0.7ex]{d} \arrow[xshift=-0.7ex]{d} \\
\& C
\stoptikzcd
\stoptext
===============
A couple of things:
1 I had to comment out line 396 of pgfsys-pdftex.def in the tikz module,
or else I'd get an undefined control sequence. It's not needed anyway
since that's pdftex.
2 In tikzlibrarycommute.code.tex, line 395 I had to add the option
ampersand replacement=\&
to avoid a TeX error. So you'll have to use '\&' instead of '&' for matrix
arrays.
3 Some LaTeX-specific stuff is commented, and support is added for
\starttikzcd \stoptikzcd
so we get a ConTeXt environment.
I'm hoping someone can volunteer to place this on the wiki, perhaps even
set it up on the modules page, with an indication of its proper place in
the texmf-modules tree etc.
Any other improvements will also be appreciated. Enjoy!
Best wishes
Idris
--
Professor Idris Samawi Hamid
Department of Philosophy
Colorado State University
Fort Collins, CO 80523
[-- Attachment #2: tikzlibrarycommute.code.tex --]
[-- Type: application/x-tex, Size: 28580 bytes --]
[-- Attachment #3: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: Commutative diagrams in tikz-cd: for wiki
2013-05-25 22:40 Commutative diagrams in tikz-cd: for wiki Idris Samawi Hamid ادريس سماوي حامد
@ 2014-02-28 20:06 ` Florêncio Neves
0 siblings, 0 replies; 2+ messages in thread
From: Florêncio Neves @ 2014-02-28 20:06 UTC (permalink / raw)
To: Idris Samawi Hamid ادريس
سماوي حامد
Cc: ntg-context, Mojca Miklavec
I have added ConTeXt support in the the newest version of tikz-cd
(which I just submitted to CTAN and should be available within the
next few days).
I didn't test it very extensively. Let me know if there is any problems.
On 5/25/13, Idris Samawi Hamid ادريس سماوي حامد <ishamid@colostate.edu> wrote:
> Dear gang,
>
> With a couple of modifications I got tikz-cd (a package to make
> commutative diagrams for categories and toposes etc. by Florêncio Neves)
> working in mkiv:
>
> http://texdoc.net/texmf-dist/doc/latex/tikz-cd/tikz-cd-doc.pdf
>
> It depends on the tikz module, already supported in mkiv.
>
> The tikz-cd module is attached, and here is a sample file:
>
> ===============
> \usemodule[tikz]
> \usetikzlibrary{commute}
>
> \starttext
> \starttikzcd %[ampersand replacement=\&]
> A \arrow{rd} \arrow[yshift=0.5ex]{r}{\phi} \& B \\
> \& C
> \stoptikzcd
>
> \starttikzcd %[ampersand replacement=\&]
> A
> \arrow[yshift=1.5ex]{r}
> \arrow[yshift=0.0ex]{r}
> \& B \arrow[xshift=0.7ex]{d} \arrow[xshift=-0.7ex]{d} \\
> \& C
> \stoptikzcd
> \stoptext
> ===============
>
> A couple of things:
>
> 1 I had to comment out line 396 of pgfsys-pdftex.def in the tikz module,
> or else I'd get an undefined control sequence. It's not needed anyway
> since that's pdftex.
>
> 2 In tikzlibrarycommute.code.tex, line 395 I had to add the option
>
> ampersand replacement=\&
>
> to avoid a TeX error. So you'll have to use '\&' instead of '&' for matrix
>
> arrays.
>
> 3 Some LaTeX-specific stuff is commented, and support is added for
>
> \starttikzcd \stoptikzcd
>
> so we get a ConTeXt environment.
>
>
> I'm hoping someone can volunteer to place this on the wiki, perhaps even
> set it up on the modules page, with an indication of its proper place in
> the texmf-modules tree etc.
>
> Any other improvements will also be appreciated. Enjoy!
>
> Best wishes
> Idris
> --
> Professor Idris Samawi Hamid
> Department of Philosophy
> Colorado State University
> Fort Collins, CO 80523
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2014-02-28 20:06 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-05-25 22:40 Commutative diagrams in tikz-cd: for wiki Idris Samawi Hamid ادريس سماوي حامد
2014-02-28 20:06 ` Florêncio Neves
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).