* ConTeXt on linux-armhf @ 2016-08-05 22:19 Jose Luis Arellano 2016-08-05 22:44 ` Mojca Miklavec 0 siblings, 1 reply; 14+ messages in thread From: Jose Luis Arellano @ 2016-08-05 22:19 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 374 bytes --] Hi guys, i need some help. I have installed the linux-armhf version of ConTeXt on my android phone via android deploy, the installation was smooth but when i try to create any document, it compile fine, but the resulting document seems to be corrupted. You can see the result in the attached file. Thanks in advance. MWE %%%%%% \starttext \input davis \stoptext %%%%%% ppa [-- Attachment #1.2: Type: text/html, Size: 512 bytes --] [-- Attachment #2: test.pdf --] [-- Type: application/pdf, Size: 11930 bytes --] [-- Attachment #3: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt on linux-armhf 2016-08-05 22:19 ConTeXt on linux-armhf Jose Luis Arellano @ 2016-08-05 22:44 ` Mojca Miklavec 2016-08-05 22:54 ` Jose Luis Arellano 0 siblings, 1 reply; 14+ messages in thread From: Mojca Miklavec @ 2016-08-05 22:44 UTC (permalink / raw) To: mailing list for ConTeXt users On 6 August 2016 at 00:19, Jose Luis Arellano wrote: > Hi guys, i need some help. I have installed the linux-armhf version of > ConTeXt on my android phone via android deploy, the installation was smooth > but when i try to create any document, it compile fine, but the resulting > document seems to be corrupted. You can see the result in the attached file. > Thanks in advance. This might be a bit tricky to debug. I can try to update the binaries to the very latest version (you should be able to get them in a few hours), but the binaries are currently compiled on Raspberry PI and if Android happens to be incompatible to some extent, then I have no clue where to start looking. Mojca ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt on linux-armhf 2016-08-05 22:44 ` Mojca Miklavec @ 2016-08-05 22:54 ` Jose Luis Arellano 2016-08-07 3:31 ` Jose Luis Arellano 0 siblings, 1 reply; 14+ messages in thread From: Jose Luis Arellano @ 2016-08-05 22:54 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1465 bytes --] Thanks for the answer Mojca, i will wait. BTW, this is the version that am using: ConTeXt Process Management 0.63 current version: 2016.07.18 16:46 2016-08-05 19:44 GMT-03:00 Mojca Miklavec <mojca.miklavec.lists@gmail.com>: > On 6 August 2016 at 00:19, Jose Luis Arellano wrote: > > Hi guys, i need some help. I have installed the linux-armhf version of > > ConTeXt on my android phone via android deploy, the installation was > smooth > > but when i try to create any document, it compile fine, but the resulting > > document seems to be corrupted. You can see the result in the attached > file. > > Thanks in advance. > > This might be a bit tricky to debug. > > I can try to update the binaries to the very latest version (you > should be able to get them in a few hours), but the binaries are > currently compiled on Raspberry PI and if Android happens to be > incompatible to some extent, then I have no clue where to start > looking. > > Mojca > ____________________________________________________________ > _______________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/ > listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ____________________________________________________________ > _______________________ [-- Attachment #1.2: Type: text/html, Size: 2581 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt on linux-armhf 2016-08-05 22:54 ` Jose Luis Arellano @ 2016-08-07 3:31 ` Jose Luis Arellano 2016-08-07 8:21 ` Pablo Rodriguez 2016-08-07 12:14 ` Mojca Miklavec 0 siblings, 2 replies; 14+ messages in thread From: Jose Luis Arellano @ 2016-08-07 3:31 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 2191 bytes --] Hi all, I want to report that ConTeXt from texlive-core <https://archlinuxarm.org/packages/any/texlive-core> ARM package seems to works correctly on chroot Linux in Android. Current version is 2016.05.17 19:20 I don't really know what am missing here, maybe my installation method: mkdir $HOME/context cd $HOME/context rsync -av rsync://contextgarden.net/minimals/setup/first-setup.sh . sh ./first-setup.sh --modules=all --engine=luatex . /Users/$HOME/context/tex/setuptex context --generate I would really like to perform a clean install of Standalone ConTeXt. Suggestions? Thanks in advance 2016-08-05 19:54 GMT-03:00 Jose Luis Arellano <jose.4rellano@gmail.com>: > Thanks for the answer Mojca, i will wait. > BTW, this is the version that am using: > > ConTeXt Process Management 0.63 > current version: 2016.07.18 16:46 > > 2016-08-05 19:44 GMT-03:00 Mojca Miklavec <mojca.miklavec.lists@gmail.com> > : > >> On 6 August 2016 at 00:19, Jose Luis Arellano wrote: >> > Hi guys, i need some help. I have installed the linux-armhf version of >> > ConTeXt on my android phone via android deploy, the installation was >> smooth >> > but when i try to create any document, it compile fine, but the >> resulting >> > document seems to be corrupted. You can see the result in the attached >> file. >> > Thanks in advance. >> >> This might be a bit tricky to debug. >> >> I can try to update the binaries to the very latest version (you >> should be able to get them in a few hours), but the binaries are >> currently compiled on Raspberry PI and if Android happens to be >> incompatible to some extent, then I have no clue where to start >> looking. >> >> Mojca >> ____________________________________________________________ >> _______________________ >> If your question is of interest to others as well, please add an entry to >> the Wiki! >> >> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/list >> info/ntg-context >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >> archive : http://foundry.supelec.fr/projects/contextrev/ >> wiki : http://contextgarden.net >> ____________________________________________________________ >> _______________________ > > > [-- Attachment #1.2: Type: text/html, Size: 3868 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt on linux-armhf 2016-08-07 3:31 ` Jose Luis Arellano @ 2016-08-07 8:21 ` Pablo Rodriguez 2016-08-07 12:14 ` Mojca Miklavec 1 sibling, 0 replies; 14+ messages in thread From: Pablo Rodriguez @ 2016-08-07 8:21 UTC (permalink / raw) To: mailing list for ConTeXt users On 08/07/2016 05:31 AM, Jose Luis Arellano wrote: > Hi all, > [...] > mkdir $HOME/context > cd $HOME/context > rsync -av rsync://contextgarden.net/minimals/setup/first-setup.sh > <http://contextgarden.net/minimals/setup/first-setup.sh> . > sh ./first-setup.sh --modules=all --engine=luatex > . /Users/$HOME/context/tex/setuptex > context --generate > > I would really like to perform a clean install of Standalone ConTeXt. > Suggestions? Hi Jose Luis, I think your last command should read: mtxrun --generate I hope it helps, Pablo -- http://www.ousia.tk ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt on linux-armhf 2016-08-07 3:31 ` Jose Luis Arellano 2016-08-07 8:21 ` Pablo Rodriguez @ 2016-08-07 12:14 ` Mojca Miklavec 2016-08-08 4:53 ` Jose Luis Arellano 1 sibling, 1 reply; 14+ messages in thread From: Mojca Miklavec @ 2016-08-07 12:14 UTC (permalink / raw) To: mailing list for ConTeXt users On 7 August 2016 at 05:31, Jose Luis Arellano wrote: > Hi all, > I want to report that ConTeXt from texlive-core ARM package seems to works > correctly on chroot Linux in Android. Current version is 2016.05.17 19:20 > I don't really know what am missing here The binaries should have been updated some time yesterday. There are only two things that come to my mind. - either you fetched the binaries for armhf and your computer requeres armel - or there are some subtle differences between the two armhf platforms (I compile the binaries on the latest raspbian) What is the PATH of TeX Live, do the binaries come from armel or armhf? Mojca ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt on linux-armhf 2016-08-07 12:14 ` Mojca Miklavec @ 2016-08-08 4:53 ` Jose Luis Arellano 2016-08-08 7:46 ` Mojca Miklavec 0 siblings, 1 reply; 14+ messages in thread From: Jose Luis Arellano @ 2016-08-08 4:53 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1520 bytes --] Hi Mojca, The binaries comes from armhf (your build), as you can see in logs attached. While the version of Tex Live installed is texlive-bin-2016.41290-5-armv7h. Maybe the problem is related to architecture of cpu, the latest raspbian use ARMv8. 2016-08-07 9:14 GMT-03:00 Mojca Miklavec <mojca.miklavec.lists@gmail.com>: > On 7 August 2016 at 05:31, Jose Luis Arellano wrote: > > Hi all, > > I want to report that ConTeXt from texlive-core ARM package seems to > works > > correctly on chroot Linux in Android. Current version is 2016.05.17 19 > :20 > > I don't really know what am missing here > > The binaries should have been updated some time yesterday. > > There are only two things that come to my mind. > > - either you fetched the binaries for armhf and your computer requeres > armel > - or there are some subtle differences between the two armhf platforms > (I compile the binaries on the latest raspbian) > > What is the PATH of TeX Live, do the binaries come from armel or armhf? > > Mojca > ____________________________________________________________ > _______________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/ > listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ____________________________________________________________ > _______________________ > [-- Attachment #1.2: Type: text/html, Size: 2745 bytes --] [-- Attachment #2: Tex.zip --] [-- Type: application/zip, Size: 23886 bytes --] [-- Attachment #3: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt on linux-armhf 2016-08-08 4:53 ` Jose Luis Arellano @ 2016-08-08 7:46 ` Mojca Miklavec 2016-08-08 8:14 ` Henri Menke 0 siblings, 1 reply; 14+ messages in thread From: Mojca Miklavec @ 2016-08-08 7:46 UTC (permalink / raw) To: mailing list for ConTeXt users On 8 August 2016 at 06:53, Jose Luis Arellano wrote: > Hi Mojca, > > The binaries comes from armhf (your build), as you can see in logs attached. > While the version of Tex Live installed is texlive-bin-2016.41290-5-armv7h. armv7h looks like "armhf". But I checked the logs and you are most likely using the binaries that were compiled for Arch Linux and your machine (CPU) specifically rather than the ones that are compiled by the TeX Live team. Can you try replacing the luatex binary in ConTeXt distribution with the binaries from http://tug.org/svn/texlive/trunk/Master/bin/ please try once with armel-linux/luatex and once with armhf-linux/luatex. (You can fetch the binary via SVN or via viewvc, but make sure that the downloaded file will be executable.) I'm curious whether that binary works for you (try with armhf-linux first). > Maybe the problem is related to architecture of cpu, the latest raspbian use > ARMv8. The exact architecture depends on hardware rather than software. I guess we have RPi2 B (Hans must know). For some reason I cannot access the machine at the moment, but I guess that RPi2+ is also armv7 (ARM Cortex-A7). I'm not 100% sure though. The question is whether an older version of OS would help in any way. In any case you should be able to just copy the luatex from your distro to the minimals and get a working PDF. Mojca ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt on linux-armhf 2016-08-08 7:46 ` Mojca Miklavec @ 2016-08-08 8:14 ` Henri Menke 2016-08-08 19:16 ` Jose Luis Arellano 0 siblings, 1 reply; 14+ messages in thread From: Henri Menke @ 2016-08-08 8:14 UTC (permalink / raw) To: mailing list for ConTeXt users Hi, as far as I know, there is no such thing like the standard ARM chip. The ARM company designs chips to fit the needs of their customers. Therefore, the Raspberry Pi processor and the processor in a smartphone may have a very different instruction set. The Wikipedia page for the ARM Cortex-A7 (Raspberry Pi 2 Model B) lists several other chips implementing the Cortex-A7 instruction set. I would only guarantee compatibility with these chips if the binaries were built for this architecture. https://en.wikipedia.org/wiki/ARM_Cortex-A7 Another issue I could think of is the filesystem format. This is very heterogeneous among Android vendors. I think Samsung uses f2fs, HTC uses YAFFS, and LG uses ext4. It could be that the luatex binary runs on some kind of compatibility layer within Android which is either lacking correct filesystem syscalls or is doing them wrong. These are just ideas. I hope it helps anyway. Cheers, Henri On 08/08/2016 09:46 AM, Mojca Miklavec wrote: > On 8 August 2016 at 06:53, Jose Luis Arellano wrote: >> Hi Mojca, >> >> The binaries comes from armhf (your build), as you can see in logs attached. >> While the version of Tex Live installed is texlive-bin-2016.41290-5-armv7h. > > armv7h looks like "armhf". > > But I checked the logs and you are most likely using the binaries that > were compiled for Arch Linux and your machine (CPU) specifically > rather than the ones that are compiled by the TeX Live team. > > Can you try replacing the luatex binary in ConTeXt distribution with > the binaries from > http://tug.org/svn/texlive/trunk/Master/bin/ > please try once with armel-linux/luatex and once with > armhf-linux/luatex. (You can fetch the binary via SVN or via viewvc, > but make sure that the downloaded file will be executable.) > > I'm curious whether that binary works for you (try with armhf-linux first). > >> Maybe the problem is related to architecture of cpu, the latest raspbian use >> ARMv8. > > The exact architecture depends on hardware rather than software. I > guess we have RPi2 B (Hans must know). For some reason I cannot access > the machine at the moment, but I guess that RPi2+ is also armv7 (ARM > Cortex-A7). I'm not 100% sure though. > > The question is whether an older version of OS would help in any way. > > In any case you should be able to just copy the luatex from your > distro to the minimals and get a working PDF. > > Mojca > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ > ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt on linux-armhf 2016-08-08 8:14 ` Henri Menke @ 2016-08-08 19:16 ` Jose Luis Arellano 2016-08-08 19:42 ` Jose Luis Arellano 2016-08-08 23:09 ` Mojca Miklavec 0 siblings, 2 replies; 14+ messages in thread From: Jose Luis Arellano @ 2016-08-08 19:16 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 3928 bytes --] Well, if i use the binary from http://tug.org/svn/texlive/trunk/Master/bin/armel-linux/ (Revision 41089) i get "Segmentation fault". However, the binary from http://tug.org/svn/texlive/trunk/Master/bin/armhf-linux/ (Revision 41117) seems to work perfectly fine. Thanks guys. 2016-08-08 5:14 GMT-03:00 Henri Menke <henrimenke@gmail.com>: > Hi, > > as far as I know, there is no such thing like the standard ARM chip. The > ARM company designs chips to fit the needs of their customers. Therefore, > the Raspberry Pi processor and the processor in a smartphone may have a > very different instruction set. > > The Wikipedia page for the ARM Cortex-A7 (Raspberry Pi 2 Model B) lists > several other chips implementing the Cortex-A7 instruction set. I would > only guarantee compatibility with these chips if the binaries were built > for this architecture. > > https://en.wikipedia.org/wiki/ARM_Cortex-A7 > > Another issue I could think of is the filesystem format. This is very > heterogeneous among Android vendors. I think Samsung uses f2fs, HTC uses > YAFFS, and LG uses ext4. It could be that the luatex binary runs on some > kind of compatibility layer within Android which is either lacking correct > filesystem syscalls or is doing them wrong. > > These are just ideas. I hope it helps anyway. > Cheers, Henri > > On 08/08/2016 09:46 AM, Mojca Miklavec wrote: > > On 8 August 2016 at 06:53, Jose Luis Arellano wrote: > >> Hi Mojca, > >> > >> The binaries comes from armhf (your build), as you can see in logs > attached. > >> While the version of Tex Live installed is texlive-bin-2016.41290-5 > -armv7h. > > > > armv7h looks like "armhf". > > > > But I checked the logs and you are most likely using the binaries that > > were compiled for Arch Linux and your machine (CPU) specifically > > rather than the ones that are compiled by the TeX Live team. > > > > Can you try replacing the luatex binary in ConTeXt distribution with > > the binaries from > > http://tug.org/svn/texlive/trunk/Master/bin/ > > please try once with armel-linux/luatex and once with > > armhf-linux/luatex. (You can fetch the binary via SVN or via viewvc, > > but make sure that the downloaded file will be executable.) > > > > I'm curious whether that binary works for you (try with armhf-linux > first). > > > >> Maybe the problem is related to architecture of cpu, the latest > raspbian use > >> ARMv8. > > > > The exact architecture depends on hardware rather than software. I > > guess we have RPi2 B (Hans must know). For some reason I cannot access > > the machine at the moment, but I guess that RPi2+ is also armv7 (ARM > > Cortex-A7). I'm not 100% sure though. > > > > The question is whether an older version of OS would help in any way. > > > > In any case you should be able to just copy the luatex from your > > distro to the minimals and get a working PDF. > > > > Mojca > > ____________________________________________________________ > _______________________ > > If your question is of interest to others as well, please add an entry > to the Wiki! > > > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/ > listinfo/ntg-context > > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > > archive : http://foundry.supelec.fr/projects/contextrev/ > > wiki : http://contextgarden.net > > ____________________________________________________________ > _______________________ > > > > ____________________________________________________________ > _______________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/ > listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ____________________________________________________________ > _______________________ > [-- Attachment #1.2: Type: text/html, Size: 6159 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt on linux-armhf 2016-08-08 19:16 ` Jose Luis Arellano @ 2016-08-08 19:42 ` Jose Luis Arellano 2016-08-08 20:29 ` Hans Hagen 2016-08-08 23:09 ` Mojca Miklavec 1 sibling, 1 reply; 14+ messages in thread From: Jose Luis Arellano @ 2016-08-08 19:42 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 4333 bytes --] I have performed a clean installation of ConTeXt Standalone beta and when i try to compile i get this: error loading file: lang-txt.lua (aborting) mtx-context | error, no format found with name: cont-en, aborting 2016-08-08 16:16 GMT-03:00 Jose Luis Arellano <jose.4rellano@gmail.com>: > Well, if i use the binary from http://tug.org/svn/ > texlive/trunk/Master/bin/armel-linux/ (Revision 41089) i get "Segmentation > fault". > However, the binary from http://tug.org/svn/texlive/trunk/Master/bin/ > armhf-linux/ (Revision 41117) seems to work perfectly fine. > Thanks guys. > > 2016-08-08 5:14 GMT-03:00 Henri Menke <henrimenke@gmail.com>: > >> Hi, >> >> as far as I know, there is no such thing like the standard ARM chip. The >> ARM company designs chips to fit the needs of their customers. Therefore, >> the Raspberry Pi processor and the processor in a smartphone may have a >> very different instruction set. >> >> The Wikipedia page for the ARM Cortex-A7 (Raspberry Pi 2 Model B) lists >> several other chips implementing the Cortex-A7 instruction set. I would >> only guarantee compatibility with these chips if the binaries were built >> for this architecture. >> >> https://en.wikipedia.org/wiki/ARM_Cortex-A7 >> >> Another issue I could think of is the filesystem format. This is very >> heterogeneous among Android vendors. I think Samsung uses f2fs, HTC uses >> YAFFS, and LG uses ext4. It could be that the luatex binary runs on some >> kind of compatibility layer within Android which is either lacking correct >> filesystem syscalls or is doing them wrong. >> >> These are just ideas. I hope it helps anyway. >> Cheers, Henri >> >> On 08/08/2016 09:46 AM, Mojca Miklavec wrote: >> > On 8 August 2016 at 06:53, Jose Luis Arellano wrote: >> >> Hi Mojca, >> >> >> >> The binaries comes from armhf (your build), as you can see in logs >> attached. >> >> While the version of Tex Live installed is texlive-bin-2016.41290-5- >> armv7h. >> > >> > armv7h looks like "armhf". >> > >> > But I checked the logs and you are most likely using the binaries that >> > were compiled for Arch Linux and your machine (CPU) specifically >> > rather than the ones that are compiled by the TeX Live team. >> > >> > Can you try replacing the luatex binary in ConTeXt distribution with >> > the binaries from >> > http://tug.org/svn/texlive/trunk/Master/bin/ >> > please try once with armel-linux/luatex and once with >> > armhf-linux/luatex. (You can fetch the binary via SVN or via viewvc, >> > but make sure that the downloaded file will be executable.) >> > >> > I'm curious whether that binary works for you (try with armhf-linux >> first). >> > >> >> Maybe the problem is related to architecture of cpu, the latest >> raspbian use >> >> ARMv8. >> > >> > The exact architecture depends on hardware rather than software. I >> > guess we have RPi2 B (Hans must know). For some reason I cannot access >> > the machine at the moment, but I guess that RPi2+ is also armv7 (ARM >> > Cortex-A7). I'm not 100% sure though. >> > >> > The question is whether an older version of OS would help in any way. >> > >> > In any case you should be able to just copy the luatex from your >> > distro to the minimals and get a working PDF. >> > >> > Mojca >> > ____________________________________________________________ >> _______________________ >> > If your question is of interest to others as well, please add an entry >> to the Wiki! >> > >> > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/list >> info/ntg-context >> > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >> > archive : http://foundry.supelec.fr/projects/contextrev/ >> > wiki : http://contextgarden.net >> > ____________________________________________________________ >> _______________________ >> > >> >> ____________________________________________________________ >> _______________________ >> If your question is of interest to others as well, please add an entry to >> the Wiki! >> >> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/list >> info/ntg-context >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >> archive : http://foundry.supelec.fr/projects/contextrev/ >> wiki : http://contextgarden.net >> ____________________________________________________________ >> _______________________ >> > > [-- Attachment #1.2: Type: text/html, Size: 6909 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt on linux-armhf 2016-08-08 19:42 ` Jose Luis Arellano @ 2016-08-08 20:29 ` Hans Hagen 0 siblings, 0 replies; 14+ messages in thread From: Hans Hagen @ 2016-08-08 20:29 UTC (permalink / raw) To: ntg-context On 8/8/2016 9:42 PM, Jose Luis Arellano wrote: > I have performed a clean installation of ConTeXt Standalone beta and > when i try to compile i get this: > > error loading file: lang-txt.lua (aborting) > mtx-context | error, no format found with name: cont-en, aborting i'd uploaded a bad zip but just uploaded a correct one ... so best run first-setup again in a while Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt on linux-armhf 2016-08-08 19:16 ` Jose Luis Arellano 2016-08-08 19:42 ` Jose Luis Arellano @ 2016-08-08 23:09 ` Mojca Miklavec 2016-08-30 0:51 ` Jose Luis Arellano 1 sibling, 1 reply; 14+ messages in thread From: Mojca Miklavec @ 2016-08-08 23:09 UTC (permalink / raw) To: mailing list for ConTeXt users On 8 August 2016 at 21:16, Jose Luis Arellano wrote: > Well, if i use the binary from > http://tug.org/svn/texlive/trunk/Master/bin/armel-linux/ (Revision 41089) i > get "Segmentation fault". This is more or less expected. > However, the binary from > http://tug.org/svn/texlive/trunk/Master/bin/armhf-linux/ (Revision 41117) > seems to work perfectly fine. In that case we should be able to find a solution. According to https://www.tug.org/texlive/build.html that binary was built on RPi as well, so there's no reason why we couldn't reproduce a working binary. There are two possible explanations: - different hardware and/or software ("fixable") - some bug in a recent version of LuaTeX Mojca ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt on linux-armhf 2016-08-08 23:09 ` Mojca Miklavec @ 2016-08-30 0:51 ` Jose Luis Arellano 0 siblings, 0 replies; 14+ messages in thread From: Jose Luis Arellano @ 2016-08-30 0:51 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 212 bytes --] Hello dear list, Just report that in the latest version of luatex still persist this bug. 0.98.1 (TeX Live 2017/dev) (INITEX) For now, am using the old luatex from link provided by Mojca 0.95.0 (tex live 2016) [-- Attachment #1.2: Type: text/html, Size: 364 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2016-08-30 0:51 UTC | newest] Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-08-05 22:19 ConTeXt on linux-armhf Jose Luis Arellano 2016-08-05 22:44 ` Mojca Miklavec 2016-08-05 22:54 ` Jose Luis Arellano 2016-08-07 3:31 ` Jose Luis Arellano 2016-08-07 8:21 ` Pablo Rodriguez 2016-08-07 12:14 ` Mojca Miklavec 2016-08-08 4:53 ` Jose Luis Arellano 2016-08-08 7:46 ` Mojca Miklavec 2016-08-08 8:14 ` Henri Menke 2016-08-08 19:16 ` Jose Luis Arellano 2016-08-08 19:42 ` Jose Luis Arellano 2016-08-08 20:29 ` Hans Hagen 2016-08-08 23:09 ` Mojca Miklavec 2016-08-30 0:51 ` Jose Luis Arellano
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).