* page ends with a section title followed by a table @ 2020-11-10 8:55 Sylvain Hubert 2020-11-10 14:59 ` Pablo Rodriguez 0 siblings, 1 reply; 13+ messages in thread From: Sylvain Hubert @ 2020-11-10 8:55 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 667 bytes --] Dear List, In the following example, the section title appears at the very end of the first page. \showframe \starttext \dorecurse{94}{a b c }\\ \dorecurse{94}{a b c }\\ \dorecurse{94}{a b c }\\ \dorecurse{94}{a b c }\\ \dorecurse{94}{a b c }\\ \dorecurse{30}{a b c } \section{title} \startxtable \startxrow \startxcell[ny=10]a\stopxcell\startxcell 1\stopxcell \stopxrow \dorecurse{9}{\startxrow\startxcell 2\stopxcell\stopxrow} \stopxtable \stoptext Does anyone know where to adjust the penalty in this case, so that the section title can be repositioned to the next page? Thanks! Best, Sylvain [-- Attachment #1.2: Type: text/html, Size: 929 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: page ends with a section title followed by a table 2020-11-10 8:55 page ends with a section title followed by a table Sylvain Hubert @ 2020-11-10 14:59 ` Pablo Rodriguez 2020-11-10 16:11 ` Sylvain Hubert 2020-11-10 16:52 ` Wolfgang Schuster 0 siblings, 2 replies; 13+ messages in thread From: Pablo Rodriguez @ 2020-11-10 14:59 UTC (permalink / raw) To: ntg-context On 11/10/20 9:55 AM, Sylvain Hubert wrote: > Dear List, > > In the following example, the section title appears at the very end of > the first page. > [...] > Does anyone know where to adjust the penalty in this case, so that the > section title can be repositioned to the next page? Hi Sylvain, \setuphead[title] [before={\blank[preference, big], after={\blank[samepage, big]] In this case, the blank space before sets a preference for inserting a page break. The blank space after requires to be in the same page with next paragraph. Of course, you don’t need both simultaneously. Just in case it helps, Pablo -- http://www.ousia.tk ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: page ends with a section title followed by a table 2020-11-10 14:59 ` Pablo Rodriguez @ 2020-11-10 16:11 ` Sylvain Hubert 2020-11-10 16:23 ` Sylvain Hubert 2020-11-10 16:52 ` Wolfgang Schuster 1 sibling, 1 reply; 13+ messages in thread From: Sylvain Hubert @ 2020-11-10 16:11 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1651 bytes --] On Tue, 10 Nov 2020 at 16:00, Pablo Rodriguez <oinos@gmx.es> wrote: > On 11/10/20 9:55 AM, Sylvain Hubert wrote: > > Dear List, > > > > In the following example, the section title appears at the very end of > > the first page. > > [...] > > Does anyone know where to adjust the penalty in this case, so that the > > section title can be repositioned to the next page? > > Hi Sylvain, > > \setuphead[title] > [before={\blank[preference, big], > after={\blank[samepage, big]] > > In this case, the blank space before sets a preference for inserting a > page break. The blank space after requires to be in the same page with > next paragraph. > > Of course, you don’t need both simultaneously. > > Just in case it helps, > > Pablo > Hello Pablo, Thank you very much for the help. The penalty of \blank indeed brings the solution closer and it does format the previous example correctly. However, when I went back to the original document, neither [before={\blank[preference, big]}] nor [after={\blank[samepage, big]}] nor both worked. I trimmed it into the following example which behaves the same: \starttext \showframe \dorecurse{50}{a } \startsection[title=spec][before={\blank[preference,big]}, after={\blank[samepage,big]}] \startxtable \startxrow \startxcell[ny=30]a\stopxcell\startxcell 1\stopxcell \stopxrow \dorecurse{29}{\startxrow\startxcell 2\stopxcell\stopxrow} \stopxtable \stoptext Do you have an idea on how this could also be formatted correctly or how one could inspect and debug the penalty? Thanks again! Sylvain [-- Attachment #1.2: Type: text/html, Size: 2226 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: page ends with a section title followed by a table 2020-11-10 16:11 ` Sylvain Hubert @ 2020-11-10 16:23 ` Sylvain Hubert 2020-11-10 16:36 ` Pablo Rodriguez 0 siblings, 1 reply; 13+ messages in thread From: Sylvain Hubert @ 2020-11-10 16:23 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 2222 bytes --] My mistake, but the problem survives the fix: \setuphead[section][after={\blank[samepage,big]}] \starttext \showframe \dorecurse{50}{a } \startsection[title=spec] \startxtable \startxrow \startxcell[ny=30]a\stopxcell\startxcell 1\stopxcell \stopxrow \dorecurse{29}{\startxrow\startxcell 2\stopxcell\stopxrow} \stopxtable \stoptext Sylvain On Tue, 10 Nov 2020 at 17:11, Sylvain Hubert <champignoom@gmail.com> wrote: > > On Tue, 10 Nov 2020 at 16:00, Pablo Rodriguez <oinos@gmx.es> wrote: > >> On 11/10/20 9:55 AM, Sylvain Hubert wrote: >> > Dear List, >> > >> > In the following example, the section title appears at the very end of >> > the first page. >> > [...] >> > Does anyone know where to adjust the penalty in this case, so that the >> > section title can be repositioned to the next page? >> >> Hi Sylvain, >> >> \setuphead[title] >> [before={\blank[preference, big], >> after={\blank[samepage, big]] >> >> In this case, the blank space before sets a preference for inserting a >> page break. The blank space after requires to be in the same page with >> next paragraph. >> >> Of course, you don’t need both simultaneously. >> >> Just in case it helps, >> >> Pablo >> > > Hello Pablo, > > Thank you very much for the help. The penalty of \blank indeed brings the > solution closer and it does format the previous example correctly. > > However, when I went back to the original document, neither > [before={\blank[preference, big]}] nor [after={\blank[samepage, big]}] nor > both worked. I trimmed it into the following example which behaves the same: > > \starttext > \showframe > \dorecurse{50}{a } > \startsection[title=spec][before={\blank[preference,big]}, > after={\blank[samepage,big]}] > \startxtable > \startxrow > \startxcell[ny=30]a\stopxcell\startxcell 1\stopxcell > \stopxrow > \dorecurse{29}{\startxrow\startxcell 2\stopxcell\stopxrow} > \stopxtable > \stoptext > > Do you have an idea on how this could also be formatted correctly or how > one could inspect and debug the penalty? > > Thanks again! > > Sylvain > [-- Attachment #1.2: Type: text/html, Size: 3110 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: page ends with a section title followed by a table 2020-11-10 16:23 ` Sylvain Hubert @ 2020-11-10 16:36 ` Pablo Rodriguez 2020-11-10 16:57 ` Sylvain Hubert 0 siblings, 1 reply; 13+ messages in thread From: Pablo Rodriguez @ 2020-11-10 16:36 UTC (permalink / raw) To: ntg-context On 11/10/20 5:23 PM, Sylvain Hubert wrote: > My mistake, but the problem survives the fix: > > \setuphead[section][after={\blank[samepage,big]}] > \starttext > \showframe > \dorecurse{50}{a } > \startsection[title=spec] > \startxtable Hi Sylvain, no fix is required when you allow the table to be split: \startxtable[split=yes] Pablo -- http://www.ousia.tk ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: page ends with a section title followed by a table 2020-11-10 16:36 ` Pablo Rodriguez @ 2020-11-10 16:57 ` Sylvain Hubert 0 siblings, 0 replies; 13+ messages in thread From: Sylvain Hubert @ 2020-11-10 16:57 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 683 bytes --] On Tue, 10 Nov 2020 at 17:37, Pablo Rodriguez <oinos@gmx.es> wrote: > On 11/10/20 5:23 PM, Sylvain Hubert wrote: > > My mistake, but the problem survives the fix: > > > > \setuphead[section][after={\blank[samepage,big]}] > > \starttext > > \showframe > > \dorecurse{50}{a } > > \startsection[title=spec] > > \startxtable > Hi Sylvain, > > no fix is required when you allow the table to be split: > > \startxtable[split=yes] > > Pablo > Hi Pablo, Thanks for the suggestion, but unlike the MWE, in the original document, the table has ten rows and is visually not suitable for a split. The large row span is meant to represent this restriction. Sylvain [-- Attachment #1.2: Type: text/html, Size: 1118 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: page ends with a section title followed by a table 2020-11-10 14:59 ` Pablo Rodriguez 2020-11-10 16:11 ` Sylvain Hubert @ 2020-11-10 16:52 ` Wolfgang Schuster 2020-11-10 17:06 ` Sylvain Hubert 1 sibling, 1 reply; 13+ messages in thread From: Wolfgang Schuster @ 2020-11-10 16:52 UTC (permalink / raw) To: mailing list for ConTeXt users, Pablo Rodriguez Pablo Rodriguez schrieb am 10.11.2020 um 15:59: > On 11/10/20 9:55 AM, Sylvain Hubert wrote: >> Dear List, >> >> In the following example, the section title appears at the very end of >> the first page. >> [...] >> Does anyone know where to adjust the penalty in this case, so that the >> section title can be repositioned to the next page? > Hi Sylvain, > > \setuphead[title] > [before={\blank[preference, big], > after={\blank[samepage, big]] > > In this case, the blank space before sets a preference for inserting a > page break. The blank space after requires to be in the same page with > next paragraph. Another method is to move the section title to the next page when the remaining spaces is below a specified number of lines. The following setup forces a page break when less than 4 lines remain on the current page. \setuphead [section] [before={\testpage[4]\blank[2*big]}] Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: page ends with a section title followed by a table 2020-11-10 16:52 ` Wolfgang Schuster @ 2020-11-10 17:06 ` Sylvain Hubert 2020-11-10 17:25 ` Wolfgang Schuster 0 siblings, 1 reply; 13+ messages in thread From: Sylvain Hubert @ 2020-11-10 17:06 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1661 bytes --] On Tue, 10 Nov 2020 at 17:54, Wolfgang Schuster < wolfgang.schuster.lists@gmail.com> wrote: > Pablo Rodriguez schrieb am 10.11.2020 um 15:59: > > On 11/10/20 9:55 AM, Sylvain Hubert wrote: > >> Dear List, > >> > >> In the following example, the section title appears at the very end of > >> the first page. > >> [...] > >> Does anyone know where to adjust the penalty in this case, so that the > >> section title can be repositioned to the next page? > > Hi Sylvain, > > > > \setuphead[title] > > [before={\blank[preference, big], > > after={\blank[samepage, big]] > > > > In this case, the blank space before sets a preference for inserting a > > page break. The blank space after requires to be in the same page with > > next paragraph. > > Another method is to move the section title to the next page when the > remaining spaces > is below a specified number of lines. The following setup forces a page > break when > less than 4 lines remain on the current page. > > \setuphead > [section] > [before={\testpage[4]\blank[2*big]}] > > Wolfgang > Hi Wolfgang, Thanks for the suggestion, but as illustrated by the second example, copied here, where the section title is at the top of the page: \starttext \showframe \dorecurse{50}{a } \startsection[title=spec][before={\blank[preference,big]}, after={\blank[samepage,big]}] \startxtable \startxrow \startxcell[ny=30]a\stopxcell\startxcell 1\stopxcell \stopxrow \dorecurse{29}{\startxrow\startxcell 2\stopxcell\stopxrow} \stopxtable \stoptext it is sometimes difficult to predict how much remaining space should trigger a line break. Sylvain [-- Attachment #1.2: Type: text/html, Size: 2324 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: page ends with a section title followed by a table 2020-11-10 17:06 ` Sylvain Hubert @ 2020-11-10 17:25 ` Wolfgang Schuster 2020-11-10 18:11 ` Sylvain Hubert 0 siblings, 1 reply; 13+ messages in thread From: Wolfgang Schuster @ 2020-11-10 17:25 UTC (permalink / raw) To: mailing list for ConTeXt users, Sylvain Hubert Sylvain Hubert schrieb am 10.11.2020 um 18:06: > Thanks for the suggestion, but as illustrated by the second example, > copied here, where the section title is at the top of the page: > > \starttext > \showframe > \dorecurse{50}{a } > \startsection[title=spec][before={\blank[preference,big]}, > after={\blank[samepage,big]}] Your settings in the second argument of \startsection make no sense because the optional argument is for userdata (values like author etc.) > \startxtable > \startxrow > \startxcell[ny=30]a\stopxcell\startxcell 1\stopxcell > \stopxrow > \dorecurse{29}{\startxrow\startxcell 2\stopxcell\stopxrow} > \stopxtable > \stoptext > > it is sometimes difficult to predict how much remaining space should > trigger a line break. You can either reformat your table or put the table in a float environment to move it to a place where it fits. Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: page ends with a section title followed by a table 2020-11-10 17:25 ` Wolfgang Schuster @ 2020-11-10 18:11 ` Sylvain Hubert 2020-11-10 18:23 ` Wolfgang Schuster 0 siblings, 1 reply; 13+ messages in thread From: Sylvain Hubert @ 2020-11-10 18:11 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1473 bytes --] On Tue, 10 Nov 2020 at 18:25, Wolfgang Schuster < wolfgang.schuster.lists@gmail.com> wrote: > Sylvain Hubert schrieb am 10.11.2020 um 18:06: > > > Thanks for the suggestion, but as illustrated by the second example, > > copied here, where the section title is at the top of the page: > > > > \starttext > > \showframe > > \dorecurse{50}{a } > > \startsection[title=spec][before={\blank[preference,big]}, > > after={\blank[samepage,big]}] > > Your settings in the second argument of \startsection make no sense > because the optional argument is for userdata (values like author etc.) > > > \startxtable > > \startxrow > > \startxcell[ny=30]a\stopxcell\startxcell 1\stopxcell > > \stopxrow > > \dorecurse{29}{\startxrow\startxcell 2\stopxcell\stopxrow} > > \stopxtable > > \stoptext > > > > it is sometimes difficult to predict how much remaining space should > > trigger a line break. > > You can either reformat your table or put the table in a float > environment to move it to a place where it fits. > > Wolfgang > Weirdly enough, "\hskip 0pt" solves the problem. \setuphead[section][after={\blank[samepage]\hskip 0pt}] \starttext \showframe \dorecurse{50}{a } \startsection[title=spec] \startxtable \startxrow \startxcell[ny=30]a\stopxcell\startxcell 1\stopxcell \stopxrow \dorecurse{29}{\startxrow\startxcell 2\stopxcell\stopxrow} \stopxtable \stoptext Sylvain [-- Attachment #1.2: Type: text/html, Size: 2087 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: page ends with a section title followed by a table 2020-11-10 18:11 ` Sylvain Hubert @ 2020-11-10 18:23 ` Wolfgang Schuster 2020-11-10 18:41 ` Sylvain Hubert 0 siblings, 1 reply; 13+ messages in thread From: Wolfgang Schuster @ 2020-11-10 18:23 UTC (permalink / raw) To: mailing list for ConTeXt users Sylvain Hubert schrieb am 10.11.2020 um 19:11: > Weirdly enough, "\hskip 0pt" solves the problem. > > \setuphead[section][after={\blank[samepage]\hskip 0pt}] > \starttext > \showframe > \dorecurse{50}{a } > \startsection[title=spec] > \startxtable What happens when you \hskip is that you switch to horizontal mode and the preferred to do this is to use \dontleavehmode. \dontleavehmode \startxtable Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: page ends with a section title followed by a table 2020-11-10 18:23 ` Wolfgang Schuster @ 2020-11-10 18:41 ` Sylvain Hubert 2020-11-10 20:55 ` Aditya Mahajan 0 siblings, 1 reply; 13+ messages in thread From: Sylvain Hubert @ 2020-11-10 18:41 UTC (permalink / raw) To: Wolfgang Schuster, mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 848 bytes --] On Tue, 10 Nov 2020 at 19:23, Wolfgang Schuster < wolfgang.schuster.lists@gmail.com> wrote: > Sylvain Hubert schrieb am 10.11.2020 um 19:11: > > > Weirdly enough, "\hskip 0pt" solves the problem. > > > > \setuphead[section][after={\blank[samepage]\hskip 0pt}] > > \starttext > > \showframe > > \dorecurse{50}{a } > > \startsection[title=spec] > > \startxtable > > > What happens when you \hskip is that you switch to horizontal > mode and the preferred to do this is to use \dontleavehmode. > > \dontleavehmode > \startxtable > > Wolfgang > Indeed. Thanks for the information! For the record, this is how the problem is finally solved: \setuphead[section][after={\blank[sampage]}] \begingroup\setupindenting[no]\dontleavehmode\startxtable … \stopxtable\endgroup Sylvain [-- Attachment #1.2: Type: text/html, Size: 1332 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: page ends with a section title followed by a table 2020-11-10 18:41 ` Sylvain Hubert @ 2020-11-10 20:55 ` Aditya Mahajan 0 siblings, 0 replies; 13+ messages in thread From: Aditya Mahajan @ 2020-11-10 20:55 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1: Type: text/plain, Size: 457 bytes --] On Tue, 10 Nov 2020, Sylvain Hubert wrote: > Indeed. Thanks for the information! > > For the record, this is how the problem is finally solved: > > \setuphead[section][after={\blank[sampage]}] > \begingroup\setupindenting[no]\dontleavehmode\startxtable … > \stopxtable\endgroup Unless you have other reasons to create a group, you can just use: \noindentation\dontleavehmode \startxtable ... \stopxtable Aditya [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2020-11-10 20:55 UTC | newest] Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2020-11-10 8:55 page ends with a section title followed by a table Sylvain Hubert 2020-11-10 14:59 ` Pablo Rodriguez 2020-11-10 16:11 ` Sylvain Hubert 2020-11-10 16:23 ` Sylvain Hubert 2020-11-10 16:36 ` Pablo Rodriguez 2020-11-10 16:57 ` Sylvain Hubert 2020-11-10 16:52 ` Wolfgang Schuster 2020-11-10 17:06 ` Sylvain Hubert 2020-11-10 17:25 ` Wolfgang Schuster 2020-11-10 18:11 ` Sylvain Hubert 2020-11-10 18:23 ` Wolfgang Schuster 2020-11-10 18:41 ` Sylvain Hubert 2020-11-10 20:55 ` Aditya Mahajan
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).