* problem with Persian feature
@ 2013-08-07 8:50 Mingranina Gingranina
2013-08-07 9:03 ` Hans Hagen
0 siblings, 1 reply; 12+ messages in thread
From: Mingranina Gingranina @ 2013-08-07 8:50 UTC (permalink / raw)
To: ntg-context
[-- Attachment #1: Type: text/plain, Size: 1092 bytes --]
Dear All,
Hello,
I am completely new to ConTeXt and after searching and exploring the
ConTeXt Garden wiki pages and other resources thoroughly, I decided
to write my first document in Persian which reads:
\enableregime [utf-8]
\definefontfeature [persian] [mode=node,language=dflt,script=arab,
init=yes,medi=yes,fina=yes,isol=yes,liga=yes,dlig=yes,rlig=yes,clig=yes,
mark=yes,mkmk=yes,kern=yes,curs=yes]
\usemodule[simplefonts]
\setmainfont[arial][feature=persian]
\mainlanguage[pe]
\setupbodyfont[arial,12pt]
\starttext
\pagedir TRT\bodydir TRT\pardir TRT\textdir TRT
این یک آزمایش است.
\pagedir TLT\bodydir TLT\pardir TLT\textdir TLT
This is a test.
\stoptext
As there are some UTF-8 characters in the document I have attached the
document to this message too.
The problem is that on my system the Persian part of the output is a set of
Persian Isolated characters, but on http://live.contextgarden.net the Persian
part does not appear at all.
Could somebody please let me know what am I doing wrong?
Thanks,
Mingranina
[-- Attachment #2: my-first-doc.tex --]
[-- Type: application/x-tex, Size: 474 bytes --]
[-- Attachment #3: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature
2013-08-07 8:50 problem with Persian feature Mingranina Gingranina
@ 2013-08-07 9:03 ` Hans Hagen
2013-08-07 10:38 ` Mingranina Gingranina
0 siblings, 1 reply; 12+ messages in thread
From: Hans Hagen @ 2013-08-07 9:03 UTC (permalink / raw)
To: ntg-context
On 8/7/2013 10:50 AM, Mingranina Gingranina wrote:
> Dear All,
> Hello,
>
> I am completely new to ConTeXt and after searching and exploring the
> ConTeXt Garden wiki pages and other resources thoroughly, I decided
> to write my first document in Persian which reads:
>
> \enableregime [utf-8]
> \definefontfeature [persian] [mode=node,language=dflt,script=arab,
> init=yes,medi=yes,fina=yes,isol=yes,liga=yes,dlig=yes,rlig=yes,clig=yes,
> mark=yes,mkmk=yes,kern=yes,curs=yes]
>
> \usemodule[simplefonts]
> \setmainfont[arial][feature=persian]
>
> \mainlanguage[pe]
> \setupbodyfont[arial,12pt]
>
> \starttext
> \pagedir TRT\bodydir TRT\pardir TRT\textdir TRT
> این یک آزمایش است.
> \pagedir TLT\bodydir TLT\pardir TLT\textdir TLT
> This is a test.
> \stoptext
>
> As there are some UTF-8 characters in the document I have attached the
> document to this message too.
>
> The problem is that on my system the Persian part of the output is a set of
> Persian Isolated characters, but on http://live.contextgarden.net the Persian
> part does not appear at all.
> Could somebody please let me know what am I doing wrong?
Here is a more minimal test:
\definefontfeature [persian] [arabic] % [...]
\mainlanguage[pe]
\starttext
\definedfont[arial*persian]
\setupalign[r2l]
این یک آزمایش است.
\setupalign[l2r]
This is a test.
\stoptext
If that works, you can try the simplefonts variant. Keep in mind that
you need to end a paragraph with an empty line or \par because otherwise
the last settings apply.
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature
2013-08-07 9:03 ` Hans Hagen
@ 2013-08-07 10:38 ` Mingranina Gingranina
2013-08-07 12:38 ` Mingranina Gingranina
` (2 more replies)
0 siblings, 3 replies; 12+ messages in thread
From: Mingranina Gingranina @ 2013-08-07 10:38 UTC (permalink / raw)
To: mailing list for ConTeXt users
Dear Hans,
Hello,
Thank you very much for your reply. With your code the Persian part
disappears on my
system unless I insert the following two lines after \definefontfeature:
\usemodule[simplefonts]
\setmainfont[arial][feature=persian]
However the Persian characters still appears as isolated characters.
Thanks,
Mingranina
On 8/7/13, Hans Hagen <pragma@wxs.nl> wrote:
> On 8/7/2013 10:50 AM, Mingranina Gingranina wrote:
>> Dear All,
>> Hello,
>>
>> I am completely new to ConTeXt and after searching and exploring the
>> ConTeXt Garden wiki pages and other resources thoroughly, I decided
>> to write my first document in Persian which reads:
>>
>> \enableregime [utf-8]
>> \definefontfeature [persian] [mode=node,language=dflt,script=arab,
>> init=yes,medi=yes,fina=yes,isol=yes,liga=yes,dlig=yes,rlig=yes,clig=yes,
>> mark=yes,mkmk=yes,kern=yes,curs=yes]
>>
>> \usemodule[simplefonts]
>> \setmainfont[arial][feature=persian]
>>
>> \mainlanguage[pe]
>> \setupbodyfont[arial,12pt]
>>
>> \starttext
>> \pagedir TRT\bodydir TRT\pardir TRT\textdir TRT
>> این یک آزمایش است.
>> \pagedir TLT\bodydir TLT\pardir TLT\textdir TLT
>> This is a test.
>> \stoptext
>>
>> As there are some UTF-8 characters in the document I have attached the
>> document to this message too.
>>
>> The problem is that on my system the Persian part of the output is a set
>> of
>> Persian Isolated characters, but on http://live.contextgarden.net the
>> Persian
>> part does not appear at all.
>> Could somebody please let me know what am I doing wrong?
>
> Here is a more minimal test:
>
> \definefontfeature [persian] [arabic] % [...]
>
> \mainlanguage[pe]
>
> \starttext
>
> \definedfont[arial*persian]
>
> \setupalign[r2l]
>
> این یک آزمایش است.
>
> \setupalign[l2r]
>
> This is a test.
>
> \stoptext
>
> If that works, you can try the simplefonts variant. Keep in mind that
> you need to end a paragraph with an empty line or \par because otherwise
> the last settings apply.
>
> Hans
>
>
> -----------------------------------------------------------------
> Hans Hagen | PRAGMA ADE
> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
> tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
> | www.pragma-pod.nl
> -----------------------------------------------------------------
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to
> the Wiki!
>
> maillist : ntg-context@ntg.nl /
> http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature
2013-08-07 10:38 ` Mingranina Gingranina
@ 2013-08-07 12:38 ` Mingranina Gingranina
2013-08-07 12:42 ` Hans Hagen
2013-08-07 13:19 ` Wolfgang Schuster
2013-08-07 17:11 ` Otared Kavian
2 siblings, 1 reply; 12+ messages in thread
From: Mingranina Gingranina @ 2013-08-07 12:38 UTC (permalink / raw)
To: mailing list for ConTeXt users
Dear Hans,
Hello again,
I just noticed that your code works fine with Dejavusans TrueType font, but
not with some other TrueType fonts.
Thanks,
On 8/7/13, Mingranina Gingranina <mingranina@gmail.com> wrote:
> Dear Hans,
> Hello,
>
> Thank you very much for your reply. With your code the Persian part
> disappears on my
> system unless I insert the following two lines after \definefontfeature:
> \usemodule[simplefonts]
> \setmainfont[arial][feature=persian]
>
> However the Persian characters still appears as isolated characters.
>
> Thanks,
> Mingranina
>
> On 8/7/13, Hans Hagen <pragma@wxs.nl> wrote:
>> On 8/7/2013 10:50 AM, Mingranina Gingranina wrote:
>>> Dear All,
>>> Hello,
>>>
>>> I am completely new to ConTeXt and after searching and exploring the
>>> ConTeXt Garden wiki pages and other resources thoroughly, I decided
>>> to write my first document in Persian which reads:
>>>
>>> \enableregime [utf-8]
>>> \definefontfeature [persian] [mode=node,language=dflt,script=arab,
>>> init=yes,medi=yes,fina=yes,isol=yes,liga=yes,dlig=yes,rlig=yes,clig=yes,
>>> mark=yes,mkmk=yes,kern=yes,curs=yes]
>>>
>>> \usemodule[simplefonts]
>>> \setmainfont[arial][feature=persian]
>>>
>>> \mainlanguage[pe]
>>> \setupbodyfont[arial,12pt]
>>>
>>> \starttext
>>> \pagedir TRT\bodydir TRT\pardir TRT\textdir TRT
>>> این یک آزمایش است.
>>> \pagedir TLT\bodydir TLT\pardir TLT\textdir TLT
>>> This is a test.
>>> \stoptext
>>>
>>> As there are some UTF-8 characters in the document I have attached the
>>> document to this message too.
>>>
>>> The problem is that on my system the Persian part of the output is a
>>> set
>>> of
>>> Persian Isolated characters, but on http://live.contextgarden.net the
>>> Persian
>>> part does not appear at all.
>>> Could somebody please let me know what am I doing wrong?
>>
>> Here is a more minimal test:
>>
>> \definefontfeature [persian] [arabic] % [...]
>>
>> \mainlanguage[pe]
>>
>> \starttext
>>
>> \definedfont[arial*persian]
>>
>> \setupalign[r2l]
>>
>> این یک آزمایش است.
>>
>> \setupalign[l2r]
>>
>> This is a test.
>>
>> \stoptext
>>
>> If that works, you can try the simplefonts variant. Keep in mind that
>> you need to end a paragraph with an empty line or \par because otherwise
>> the last settings apply.
>>
>> Hans
>>
>>
>> -----------------------------------------------------------------
>> Hans Hagen | PRAGMA ADE
>> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
>> tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
>> | www.pragma-pod.nl
>> -----------------------------------------------------------------
>> ___________________________________________________________________________________
>> If your question is of interest to others as well, please add an entry to
>> the Wiki!
>>
>> maillist : ntg-context@ntg.nl /
>> http://www.ntg.nl/mailman/listinfo/ntg-context
>> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
>> archive : http://foundry.supelec.fr/projects/contextrev/
>> wiki : http://contextgarden.net
>> ___________________________________________________________________________________
>
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature
2013-08-07 12:38 ` Mingranina Gingranina
@ 2013-08-07 12:42 ` Hans Hagen
2013-08-07 14:09 ` Mingranina Gingranina
0 siblings, 1 reply; 12+ messages in thread
From: Hans Hagen @ 2013-08-07 12:42 UTC (permalink / raw)
To: ntg-context
On 8/7/2013 2:38 PM, Mingranina Gingranina wrote:
> Dear Hans,
> Hello again,
>
> I just noticed that your code works fine with Dejavusans TrueType font, but
> not with some other TrueType fonts.
in which case you use fonts that have no arabic shapes
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature
2013-08-07 10:38 ` Mingranina Gingranina
2013-08-07 12:38 ` Mingranina Gingranina
@ 2013-08-07 13:19 ` Wolfgang Schuster
2013-08-07 20:48 ` Mingranina Gingranina
2013-08-07 17:11 ` Otared Kavian
2 siblings, 1 reply; 12+ messages in thread
From: Wolfgang Schuster @ 2013-08-07 13:19 UTC (permalink / raw)
To: mailing list for ConTeXt users
Am 07.08.2013 um 12:38 schrieb Mingranina Gingranina <mingranina@gmail.com>:
> Dear Hans,
> Hello,
>
> Thank you very much for your reply. With your code the Persian part
> disappears on my
> system unless I insert the following two lines after \definefontfeature:
> \usemodule[simplefonts]
> \setmainfont[arial][feature=persian]
>
> However the Persian characters still appears as isolated characters.
The name of the key is “features” and not “feature”.
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature
2013-08-07 12:42 ` Hans Hagen
@ 2013-08-07 14:09 ` Mingranina Gingranina
2013-08-07 17:54 ` Pablo Rodríguez
0 siblings, 1 reply; 12+ messages in thread
From: Mingranina Gingranina @ 2013-08-07 14:09 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 8/7/13, Hans Hagen <pragma@wxs.nl> wrote:
> On 8/7/2013 2:38 PM, Mingranina Gingranina wrote:
>> Dear Hans,
>> Hello again,
>>
>> I just noticed that your code works fine with Dejavusans TrueType font,
>> but
>> not with some other TrueType fonts.
>
> in which case you use fonts that have no arabic shapes
For TrueType fonts which are in the directory '/usr/share/fonts/TTF/'
everything works fine,
but if the font is in '/usr/local/share/fonts/' then the code fails.
Please note that I have already
executed the commands:
OSFONTDIR="/usr/share/fonts;/usr/local/share/fonts;$HOME/.fonts"
mtxrun --script fonts --reload
mtxrun --script fonts --list --all --pattern=*
Thanks,
Mingranina
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature
2013-08-07 10:38 ` Mingranina Gingranina
2013-08-07 12:38 ` Mingranina Gingranina
2013-08-07 13:19 ` Wolfgang Schuster
@ 2013-08-07 17:11 ` Otared Kavian
2013-08-07 21:07 ` Mingranina Gingranina
2 siblings, 1 reply; 12+ messages in thread
From: Otared Kavian @ 2013-08-07 17:11 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hi Mingranina,
As Wolfgang said, if I fix the name of the key in \setmainfont (from « feature » to « features », see below), then your test works fine here (using Mac OS X 10.8.4, and ConTeXt ver: 2013.08.07 14:40 MKIV beta fmt: 2013.8.7).
By the way in mkiv you don't need to add \enableregime[utf-8]: by default ConTeXt uses utf-8.
\definefontfeature [persian] [mode=node,language=dflt,script=arab,
init=yes,medi=yes,fina=yes,isol=yes,liga=yes,dlig=yes,rlig=yes,clig=yes,
mark=yes,mkmk=yes,kern=yes,curs=yes]
\usemodule[simplefonts]
\setmainfont[arial][features=persian]
%% ^^^^^^
\mainlanguage[pe]
\setupbodyfont[arial,12pt]
\starttext
\pagedir TRT\bodydir TRT\pardir TRT\textdir TRT
این یک آزمایش است.
\pagedir TLT\bodydir TLT\pardir TLT\textdir TLT
This is a test.
\stoptext
Best regards: OK
On 7 août 2013, at 12:38, Mingranina Gingranina <mingranina@gmail.com> wrote:
> Dear Hans,
> Hello,
>
> Thank you very much for your reply. With your code the Persian part
> disappears on my
> system unless I insert the following two lines after \definefontfeature:
> \usemodule[simplefonts]
> \setmainfont[arial][feature=persian]
>
> However the Persian characters still appears as isolated characters.
>
> Thanks,
> Mingranina
>
> On 8/7/13, Hans Hagen <pragma@wxs.nl> wrote:
>> On 8/7/2013 10:50 AM, Mingranina Gingranina wrote:
>>> Dear All,
>>> Hello,
>>>
>>> I am completely new to ConTeXt and after searching and exploring the
>>> ConTeXt Garden wiki pages and other resources thoroughly, I decided
>>> to write my first document in Persian which reads:
>>>
>>> \enableregime [utf-8]
>>> \definefontfeature [persian] [mode=node,language=dflt,script=arab,
>>> init=yes,medi=yes,fina=yes,isol=yes,liga=yes,dlig=yes,rlig=yes,clig=yes,
>>> mark=yes,mkmk=yes,kern=yes,curs=yes]
>>>
>>> \usemodule[simplefonts]
>>> \setmainfont[arial][feature=persian]
>>>
>>> \mainlanguage[pe]
>>> \setupbodyfont[arial,12pt]
>>>
>>> \starttext
>>> \pagedir TRT\bodydir TRT\pardir TRT\textdir TRT
>>> این یک آزمایش است.
>>> \pagedir TLT\bodydir TLT\pardir TLT\textdir TLT
>>> This is a test.
>>> \stoptext
>>>
>>> As there are some UTF-8 characters in the document I have attached the
>>> document to this message too.
>>>
>>> The problem is that on my system the Persian part of the output is a set
>>> of
>>> Persian Isolated characters, but on http://live.contextgarden.net the
>>> Persian
>>> part does not appear at all.
>>> Could somebody please let me know what am I doing wrong?
>>
>> Here is a more minimal test:
>>
>> \definefontfeature [persian] [arabic] % [...]
>>
>> \mainlanguage[pe]
>>
>> \starttext
>>
>> \definedfont[arial*persian]
>>
>> \setupalign[r2l]
>>
>> این یک آزمایش است.
>>
>> \setupalign[l2r]
>>
>> This is a test.
>>
>> \stoptext
>>
>> If that works, you can try the simplefonts variant. Keep in mind that
>> you need to end a paragraph with an empty line or \par because otherwise
>> the last settings apply.
>>
>> Hans
>>
>>
>> -----------------------------------------------------------------
>> Hans Hagen | PRAGMA ADE
>> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
>> tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
>> | www.pragma-pod.nl
>> -----------------------------------------------------------------
>> ___________________________________________________________________________________
>> If your question is of interest to others as well, please add an entry to
>> the Wiki!
>>
>> maillist : ntg-context@ntg.nl /
>> http://www.ntg.nl/mailman/listinfo/ntg-context
>> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
>> archive : http://foundry.supelec.fr/projects/contextrev/
>> wiki : http://contextgarden.net
>> ___________________________________________________________________________________
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature
2013-08-07 14:09 ` Mingranina Gingranina
@ 2013-08-07 17:54 ` Pablo Rodríguez
2013-08-07 20:39 ` Mingranina Gingranina
0 siblings, 1 reply; 12+ messages in thread
From: Pablo Rodríguez @ 2013-08-07 17:54 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 08/07/2013 04:09 PM, Mingranina Gingranina wrote:
> [...]
> For TrueType fonts which are in the directory '/usr/share/fonts/TTF/'
> everything works fine,
> but if the font is in '/usr/local/share/fonts/' then the code fails.
> Please note that I have already
> executed the commands:
>
> OSFONTDIR="/usr/share/fonts;/usr/local/share/fonts;$HOME/.fonts"
> mtxrun --script fonts --reload
> mtxrun --script fonts --list --all --pattern=*
Hi Mingranina,
are the fonts from /usr/local/share/fonts listed with the last command
you mention?
If you don’t have other issues, you can always move all fonts from
/usr/local/share/fonts to /usr/share/fonts. This is an easy fix.
Just in case it helps,
Pablo
--
http://www.ousia.tk
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature
2013-08-07 17:54 ` Pablo Rodríguez
@ 2013-08-07 20:39 ` Mingranina Gingranina
0 siblings, 0 replies; 12+ messages in thread
From: Mingranina Gingranina @ 2013-08-07 20:39 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 8/7/13, Pablo Rodríguez <oinos@web.de> wrote:
> On 08/07/2013 04:09 PM, Mingranina Gingranina wrote:
>> [...]
>> For TrueType fonts which are in the directory '/usr/share/fonts/TTF/'
>> everything works fine,
>> but if the font is in '/usr/local/share/fonts/' then the code fails.
>> Please note that I have already
>> executed the commands:
>>
>> OSFONTDIR="/usr/share/fonts;/usr/local/share/fonts;$HOME/.fonts"
>> mtxrun --script fonts --reload
>> mtxrun --script fonts --list --all --pattern=*
>
> Hi Mingranina,
>
> are the fonts from /usr/local/share/fonts listed with the last command
> you mention?
No, they are not listed.
> If you don’t have other issues, you can always move all fonts from
> /usr/local/share/fonts to /usr/share/fonts. This is an easy fix.
You are right. I think this is the only way to fix this problem.
Thanks,
Mingranina
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature
2013-08-07 13:19 ` Wolfgang Schuster
@ 2013-08-07 20:48 ` Mingranina Gingranina
0 siblings, 0 replies; 12+ messages in thread
From: Mingranina Gingranina @ 2013-08-07 20:48 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 8/7/13, Wolfgang Schuster <schuster.wolfgang@gmail.com> wrote:
>
> Am 07.08.2013 um 12:38 schrieb Mingranina Gingranina
> <mingranina@gmail.com>:
>
>> Dear Hans,
>> Hello,
>>
>> Thank you very much for your reply. With your code the Persian part
>> disappears on my
>> system unless I insert the following two lines after \definefontfeature:
>> \usemodule[simplefonts]
>> \setmainfont[arial][feature=persian]
>>
>> However the Persian characters still appears as isolated characters.
>
> The name of the key is “features” and not “feature”.
Thanks for reminding me of this mistake.
Regards,
Mingranina
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature
2013-08-07 17:11 ` Otared Kavian
@ 2013-08-07 21:07 ` Mingranina Gingranina
0 siblings, 0 replies; 12+ messages in thread
From: Mingranina Gingranina @ 2013-08-07 21:07 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 8/7/13, Otared Kavian <otared@gmail.com> wrote:
>
> As Wolfgang said, if I fix the name of the key in \setmainfont (from «
> feature » to « features », see below), then your test works fine here (using
> Mac OS X 10.8.4, and ConTeXt ver: 2013.08.07 14:40 MKIV beta fmt:
> 2013.8.7).
Unfortunately, on my system it does not work.
> By the way in mkiv you don't need to add \enableregime[utf-8]: by default
> ConTeXt uses utf-8.
Thanks for this hint.
Regards,
Mingranina
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2013-08-07 21:07 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2013-08-07 8:50 problem with Persian feature Mingranina Gingranina
2013-08-07 9:03 ` Hans Hagen
2013-08-07 10:38 ` Mingranina Gingranina
2013-08-07 12:38 ` Mingranina Gingranina
2013-08-07 12:42 ` Hans Hagen
2013-08-07 14:09 ` Mingranina Gingranina
2013-08-07 17:54 ` Pablo Rodríguez
2013-08-07 20:39 ` Mingranina Gingranina
2013-08-07 13:19 ` Wolfgang Schuster
2013-08-07 20:48 ` Mingranina Gingranina
2013-08-07 17:11 ` Otared Kavian
2013-08-07 21:07 ` Mingranina Gingranina
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).