* problem with Persian feature @ 2013-08-07 8:50 Mingranina Gingranina 2013-08-07 9:03 ` Hans Hagen 0 siblings, 1 reply; 12+ messages in thread From: Mingranina Gingranina @ 2013-08-07 8:50 UTC (permalink / raw) To: ntg-context [-- Attachment #1: Type: text/plain, Size: 1092 bytes --] Dear All, Hello, I am completely new to ConTeXt and after searching and exploring the ConTeXt Garden wiki pages and other resources thoroughly, I decided to write my first document in Persian which reads: \enableregime [utf-8] \definefontfeature [persian] [mode=node,language=dflt,script=arab, init=yes,medi=yes,fina=yes,isol=yes,liga=yes,dlig=yes,rlig=yes,clig=yes, mark=yes,mkmk=yes,kern=yes,curs=yes] \usemodule[simplefonts] \setmainfont[arial][feature=persian] \mainlanguage[pe] \setupbodyfont[arial,12pt] \starttext \pagedir TRT\bodydir TRT\pardir TRT\textdir TRT این یک آزمایش است. \pagedir TLT\bodydir TLT\pardir TLT\textdir TLT This is a test. \stoptext As there are some UTF-8 characters in the document I have attached the document to this message too. The problem is that on my system the Persian part of the output is a set of Persian Isolated characters, but on http://live.contextgarden.net the Persian part does not appear at all. Could somebody please let me know what am I doing wrong? Thanks, Mingranina [-- Attachment #2: my-first-doc.tex --] [-- Type: application/x-tex, Size: 474 bytes --] [-- Attachment #3: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature 2013-08-07 8:50 problem with Persian feature Mingranina Gingranina @ 2013-08-07 9:03 ` Hans Hagen 2013-08-07 10:38 ` Mingranina Gingranina 0 siblings, 1 reply; 12+ messages in thread From: Hans Hagen @ 2013-08-07 9:03 UTC (permalink / raw) To: ntg-context On 8/7/2013 10:50 AM, Mingranina Gingranina wrote: > Dear All, > Hello, > > I am completely new to ConTeXt and after searching and exploring the > ConTeXt Garden wiki pages and other resources thoroughly, I decided > to write my first document in Persian which reads: > > \enableregime [utf-8] > \definefontfeature [persian] [mode=node,language=dflt,script=arab, > init=yes,medi=yes,fina=yes,isol=yes,liga=yes,dlig=yes,rlig=yes,clig=yes, > mark=yes,mkmk=yes,kern=yes,curs=yes] > > \usemodule[simplefonts] > \setmainfont[arial][feature=persian] > > \mainlanguage[pe] > \setupbodyfont[arial,12pt] > > \starttext > \pagedir TRT\bodydir TRT\pardir TRT\textdir TRT > این یک آزمایش است. > \pagedir TLT\bodydir TLT\pardir TLT\textdir TLT > This is a test. > \stoptext > > As there are some UTF-8 characters in the document I have attached the > document to this message too. > > The problem is that on my system the Persian part of the output is a set of > Persian Isolated characters, but on http://live.contextgarden.net the Persian > part does not appear at all. > Could somebody please let me know what am I doing wrong? Here is a more minimal test: \definefontfeature [persian] [arabic] % [...] \mainlanguage[pe] \starttext \definedfont[arial*persian] \setupalign[r2l] این یک آزمایش است. \setupalign[l2r] This is a test. \stoptext If that works, you can try the simplefonts variant. Keep in mind that you need to end a paragraph with an empty line or \par because otherwise the last settings apply. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature 2013-08-07 9:03 ` Hans Hagen @ 2013-08-07 10:38 ` Mingranina Gingranina 2013-08-07 12:38 ` Mingranina Gingranina ` (2 more replies) 0 siblings, 3 replies; 12+ messages in thread From: Mingranina Gingranina @ 2013-08-07 10:38 UTC (permalink / raw) To: mailing list for ConTeXt users Dear Hans, Hello, Thank you very much for your reply. With your code the Persian part disappears on my system unless I insert the following two lines after \definefontfeature: \usemodule[simplefonts] \setmainfont[arial][feature=persian] However the Persian characters still appears as isolated characters. Thanks, Mingranina On 8/7/13, Hans Hagen <pragma@wxs.nl> wrote: > On 8/7/2013 10:50 AM, Mingranina Gingranina wrote: >> Dear All, >> Hello, >> >> I am completely new to ConTeXt and after searching and exploring the >> ConTeXt Garden wiki pages and other resources thoroughly, I decided >> to write my first document in Persian which reads: >> >> \enableregime [utf-8] >> \definefontfeature [persian] [mode=node,language=dflt,script=arab, >> init=yes,medi=yes,fina=yes,isol=yes,liga=yes,dlig=yes,rlig=yes,clig=yes, >> mark=yes,mkmk=yes,kern=yes,curs=yes] >> >> \usemodule[simplefonts] >> \setmainfont[arial][feature=persian] >> >> \mainlanguage[pe] >> \setupbodyfont[arial,12pt] >> >> \starttext >> \pagedir TRT\bodydir TRT\pardir TRT\textdir TRT >> این یک آزمایش است. >> \pagedir TLT\bodydir TLT\pardir TLT\textdir TLT >> This is a test. >> \stoptext >> >> As there are some UTF-8 characters in the document I have attached the >> document to this message too. >> >> The problem is that on my system the Persian part of the output is a set >> of >> Persian Isolated characters, but on http://live.contextgarden.net the >> Persian >> part does not appear at all. >> Could somebody please let me know what am I doing wrong? > > Here is a more minimal test: > > \definefontfeature [persian] [arabic] % [...] > > \mainlanguage[pe] > > \starttext > > \definedfont[arial*persian] > > \setupalign[r2l] > > این یک آزمایش است. > > \setupalign[l2r] > > This is a test. > > \stoptext > > If that works, you can try the simplefonts variant. Keep in mind that > you need to end a paragraph with an empty line or \par because otherwise > the last settings apply. > > Hans > > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com > | www.pragma-pod.nl > ----------------------------------------------------------------- > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature 2013-08-07 10:38 ` Mingranina Gingranina @ 2013-08-07 12:38 ` Mingranina Gingranina 2013-08-07 12:42 ` Hans Hagen 2013-08-07 13:19 ` Wolfgang Schuster 2013-08-07 17:11 ` Otared Kavian 2 siblings, 1 reply; 12+ messages in thread From: Mingranina Gingranina @ 2013-08-07 12:38 UTC (permalink / raw) To: mailing list for ConTeXt users Dear Hans, Hello again, I just noticed that your code works fine with Dejavusans TrueType font, but not with some other TrueType fonts. Thanks, On 8/7/13, Mingranina Gingranina <mingranina@gmail.com> wrote: > Dear Hans, > Hello, > > Thank you very much for your reply. With your code the Persian part > disappears on my > system unless I insert the following two lines after \definefontfeature: > \usemodule[simplefonts] > \setmainfont[arial][feature=persian] > > However the Persian characters still appears as isolated characters. > > Thanks, > Mingranina > > On 8/7/13, Hans Hagen <pragma@wxs.nl> wrote: >> On 8/7/2013 10:50 AM, Mingranina Gingranina wrote: >>> Dear All, >>> Hello, >>> >>> I am completely new to ConTeXt and after searching and exploring the >>> ConTeXt Garden wiki pages and other resources thoroughly, I decided >>> to write my first document in Persian which reads: >>> >>> \enableregime [utf-8] >>> \definefontfeature [persian] [mode=node,language=dflt,script=arab, >>> init=yes,medi=yes,fina=yes,isol=yes,liga=yes,dlig=yes,rlig=yes,clig=yes, >>> mark=yes,mkmk=yes,kern=yes,curs=yes] >>> >>> \usemodule[simplefonts] >>> \setmainfont[arial][feature=persian] >>> >>> \mainlanguage[pe] >>> \setupbodyfont[arial,12pt] >>> >>> \starttext >>> \pagedir TRT\bodydir TRT\pardir TRT\textdir TRT >>> این یک آزمایش است. >>> \pagedir TLT\bodydir TLT\pardir TLT\textdir TLT >>> This is a test. >>> \stoptext >>> >>> As there are some UTF-8 characters in the document I have attached the >>> document to this message too. >>> >>> The problem is that on my system the Persian part of the output is a >>> set >>> of >>> Persian Isolated characters, but on http://live.contextgarden.net the >>> Persian >>> part does not appear at all. >>> Could somebody please let me know what am I doing wrong? >> >> Here is a more minimal test: >> >> \definefontfeature [persian] [arabic] % [...] >> >> \mainlanguage[pe] >> >> \starttext >> >> \definedfont[arial*persian] >> >> \setupalign[r2l] >> >> این یک آزمایش است. >> >> \setupalign[l2r] >> >> This is a test. >> >> \stoptext >> >> If that works, you can try the simplefonts variant. Keep in mind that >> you need to end a paragraph with an empty line or \par because otherwise >> the last settings apply. >> >> Hans >> >> >> ----------------------------------------------------------------- >> Hans Hagen | PRAGMA ADE >> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands >> tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com >> | www.pragma-pod.nl >> ----------------------------------------------------------------- >> ___________________________________________________________________________________ >> If your question is of interest to others as well, please add an entry to >> the Wiki! >> >> maillist : ntg-context@ntg.nl / >> http://www.ntg.nl/mailman/listinfo/ntg-context >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >> archive : http://foundry.supelec.fr/projects/contextrev/ >> wiki : http://contextgarden.net >> ___________________________________________________________________________________ > ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature 2013-08-07 12:38 ` Mingranina Gingranina @ 2013-08-07 12:42 ` Hans Hagen 2013-08-07 14:09 ` Mingranina Gingranina 0 siblings, 1 reply; 12+ messages in thread From: Hans Hagen @ 2013-08-07 12:42 UTC (permalink / raw) To: ntg-context On 8/7/2013 2:38 PM, Mingranina Gingranina wrote: > Dear Hans, > Hello again, > > I just noticed that your code works fine with Dejavusans TrueType font, but > not with some other TrueType fonts. in which case you use fonts that have no arabic shapes Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature 2013-08-07 12:42 ` Hans Hagen @ 2013-08-07 14:09 ` Mingranina Gingranina 2013-08-07 17:54 ` Pablo Rodríguez 0 siblings, 1 reply; 12+ messages in thread From: Mingranina Gingranina @ 2013-08-07 14:09 UTC (permalink / raw) To: mailing list for ConTeXt users On 8/7/13, Hans Hagen <pragma@wxs.nl> wrote: > On 8/7/2013 2:38 PM, Mingranina Gingranina wrote: >> Dear Hans, >> Hello again, >> >> I just noticed that your code works fine with Dejavusans TrueType font, >> but >> not with some other TrueType fonts. > > in which case you use fonts that have no arabic shapes For TrueType fonts which are in the directory '/usr/share/fonts/TTF/' everything works fine, but if the font is in '/usr/local/share/fonts/' then the code fails. Please note that I have already executed the commands: OSFONTDIR="/usr/share/fonts;/usr/local/share/fonts;$HOME/.fonts" mtxrun --script fonts --reload mtxrun --script fonts --list --all --pattern=* Thanks, Mingranina ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature 2013-08-07 14:09 ` Mingranina Gingranina @ 2013-08-07 17:54 ` Pablo Rodríguez 2013-08-07 20:39 ` Mingranina Gingranina 0 siblings, 1 reply; 12+ messages in thread From: Pablo Rodríguez @ 2013-08-07 17:54 UTC (permalink / raw) To: mailing list for ConTeXt users On 08/07/2013 04:09 PM, Mingranina Gingranina wrote: > [...] > For TrueType fonts which are in the directory '/usr/share/fonts/TTF/' > everything works fine, > but if the font is in '/usr/local/share/fonts/' then the code fails. > Please note that I have already > executed the commands: > > OSFONTDIR="/usr/share/fonts;/usr/local/share/fonts;$HOME/.fonts" > mtxrun --script fonts --reload > mtxrun --script fonts --list --all --pattern=* Hi Mingranina, are the fonts from /usr/local/share/fonts listed with the last command you mention? If you don’t have other issues, you can always move all fonts from /usr/local/share/fonts to /usr/share/fonts. This is an easy fix. Just in case it helps, Pablo -- http://www.ousia.tk ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature 2013-08-07 17:54 ` Pablo Rodríguez @ 2013-08-07 20:39 ` Mingranina Gingranina 0 siblings, 0 replies; 12+ messages in thread From: Mingranina Gingranina @ 2013-08-07 20:39 UTC (permalink / raw) To: mailing list for ConTeXt users On 8/7/13, Pablo Rodríguez <oinos@web.de> wrote: > On 08/07/2013 04:09 PM, Mingranina Gingranina wrote: >> [...] >> For TrueType fonts which are in the directory '/usr/share/fonts/TTF/' >> everything works fine, >> but if the font is in '/usr/local/share/fonts/' then the code fails. >> Please note that I have already >> executed the commands: >> >> OSFONTDIR="/usr/share/fonts;/usr/local/share/fonts;$HOME/.fonts" >> mtxrun --script fonts --reload >> mtxrun --script fonts --list --all --pattern=* > > Hi Mingranina, > > are the fonts from /usr/local/share/fonts listed with the last command > you mention? No, they are not listed. > If you don’t have other issues, you can always move all fonts from > /usr/local/share/fonts to /usr/share/fonts. This is an easy fix. You are right. I think this is the only way to fix this problem. Thanks, Mingranina ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature 2013-08-07 10:38 ` Mingranina Gingranina 2013-08-07 12:38 ` Mingranina Gingranina @ 2013-08-07 13:19 ` Wolfgang Schuster 2013-08-07 20:48 ` Mingranina Gingranina 2013-08-07 17:11 ` Otared Kavian 2 siblings, 1 reply; 12+ messages in thread From: Wolfgang Schuster @ 2013-08-07 13:19 UTC (permalink / raw) To: mailing list for ConTeXt users Am 07.08.2013 um 12:38 schrieb Mingranina Gingranina <mingranina@gmail.com>: > Dear Hans, > Hello, > > Thank you very much for your reply. With your code the Persian part > disappears on my > system unless I insert the following two lines after \definefontfeature: > \usemodule[simplefonts] > \setmainfont[arial][feature=persian] > > However the Persian characters still appears as isolated characters. The name of the key is “features” and not “feature”. Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature 2013-08-07 13:19 ` Wolfgang Schuster @ 2013-08-07 20:48 ` Mingranina Gingranina 0 siblings, 0 replies; 12+ messages in thread From: Mingranina Gingranina @ 2013-08-07 20:48 UTC (permalink / raw) To: mailing list for ConTeXt users On 8/7/13, Wolfgang Schuster <schuster.wolfgang@gmail.com> wrote: > > Am 07.08.2013 um 12:38 schrieb Mingranina Gingranina > <mingranina@gmail.com>: > >> Dear Hans, >> Hello, >> >> Thank you very much for your reply. With your code the Persian part >> disappears on my >> system unless I insert the following two lines after \definefontfeature: >> \usemodule[simplefonts] >> \setmainfont[arial][feature=persian] >> >> However the Persian characters still appears as isolated characters. > > The name of the key is “features” and not “feature”. Thanks for reminding me of this mistake. Regards, Mingranina ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature 2013-08-07 10:38 ` Mingranina Gingranina 2013-08-07 12:38 ` Mingranina Gingranina 2013-08-07 13:19 ` Wolfgang Schuster @ 2013-08-07 17:11 ` Otared Kavian 2013-08-07 21:07 ` Mingranina Gingranina 2 siblings, 1 reply; 12+ messages in thread From: Otared Kavian @ 2013-08-07 17:11 UTC (permalink / raw) To: mailing list for ConTeXt users Hi Mingranina, As Wolfgang said, if I fix the name of the key in \setmainfont (from « feature » to « features », see below), then your test works fine here (using Mac OS X 10.8.4, and ConTeXt ver: 2013.08.07 14:40 MKIV beta fmt: 2013.8.7). By the way in mkiv you don't need to add \enableregime[utf-8]: by default ConTeXt uses utf-8. \definefontfeature [persian] [mode=node,language=dflt,script=arab, init=yes,medi=yes,fina=yes,isol=yes,liga=yes,dlig=yes,rlig=yes,clig=yes, mark=yes,mkmk=yes,kern=yes,curs=yes] \usemodule[simplefonts] \setmainfont[arial][features=persian] %% ^^^^^^ \mainlanguage[pe] \setupbodyfont[arial,12pt] \starttext \pagedir TRT\bodydir TRT\pardir TRT\textdir TRT این یک آزمایش است. \pagedir TLT\bodydir TLT\pardir TLT\textdir TLT This is a test. \stoptext Best regards: OK On 7 août 2013, at 12:38, Mingranina Gingranina <mingranina@gmail.com> wrote: > Dear Hans, > Hello, > > Thank you very much for your reply. With your code the Persian part > disappears on my > system unless I insert the following two lines after \definefontfeature: > \usemodule[simplefonts] > \setmainfont[arial][feature=persian] > > However the Persian characters still appears as isolated characters. > > Thanks, > Mingranina > > On 8/7/13, Hans Hagen <pragma@wxs.nl> wrote: >> On 8/7/2013 10:50 AM, Mingranina Gingranina wrote: >>> Dear All, >>> Hello, >>> >>> I am completely new to ConTeXt and after searching and exploring the >>> ConTeXt Garden wiki pages and other resources thoroughly, I decided >>> to write my first document in Persian which reads: >>> >>> \enableregime [utf-8] >>> \definefontfeature [persian] [mode=node,language=dflt,script=arab, >>> init=yes,medi=yes,fina=yes,isol=yes,liga=yes,dlig=yes,rlig=yes,clig=yes, >>> mark=yes,mkmk=yes,kern=yes,curs=yes] >>> >>> \usemodule[simplefonts] >>> \setmainfont[arial][feature=persian] >>> >>> \mainlanguage[pe] >>> \setupbodyfont[arial,12pt] >>> >>> \starttext >>> \pagedir TRT\bodydir TRT\pardir TRT\textdir TRT >>> این یک آزمایش است. >>> \pagedir TLT\bodydir TLT\pardir TLT\textdir TLT >>> This is a test. >>> \stoptext >>> >>> As there are some UTF-8 characters in the document I have attached the >>> document to this message too. >>> >>> The problem is that on my system the Persian part of the output is a set >>> of >>> Persian Isolated characters, but on http://live.contextgarden.net the >>> Persian >>> part does not appear at all. >>> Could somebody please let me know what am I doing wrong? >> >> Here is a more minimal test: >> >> \definefontfeature [persian] [arabic] % [...] >> >> \mainlanguage[pe] >> >> \starttext >> >> \definedfont[arial*persian] >> >> \setupalign[r2l] >> >> این یک آزمایش است. >> >> \setupalign[l2r] >> >> This is a test. >> >> \stoptext >> >> If that works, you can try the simplefonts variant. Keep in mind that >> you need to end a paragraph with an empty line or \par because otherwise >> the last settings apply. >> >> Hans >> >> >> ----------------------------------------------------------------- >> Hans Hagen | PRAGMA ADE >> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands >> tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com >> | www.pragma-pod.nl >> ----------------------------------------------------------------- >> ___________________________________________________________________________________ >> If your question is of interest to others as well, please add an entry to >> the Wiki! >> >> maillist : ntg-context@ntg.nl / >> http://www.ntg.nl/mailman/listinfo/ntg-context >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >> archive : http://foundry.supelec.fr/projects/contextrev/ >> wiki : http://contextgarden.net >> ___________________________________________________________________________________ > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: problem with Persian feature 2013-08-07 17:11 ` Otared Kavian @ 2013-08-07 21:07 ` Mingranina Gingranina 0 siblings, 0 replies; 12+ messages in thread From: Mingranina Gingranina @ 2013-08-07 21:07 UTC (permalink / raw) To: mailing list for ConTeXt users On 8/7/13, Otared Kavian <otared@gmail.com> wrote: > > As Wolfgang said, if I fix the name of the key in \setmainfont (from « > feature » to « features », see below), then your test works fine here (using > Mac OS X 10.8.4, and ConTeXt ver: 2013.08.07 14:40 MKIV beta fmt: > 2013.8.7). Unfortunately, on my system it does not work. > By the way in mkiv you don't need to add \enableregime[utf-8]: by default > ConTeXt uses utf-8. Thanks for this hint. Regards, Mingranina ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2013-08-07 21:07 UTC | newest] Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2013-08-07 8:50 problem with Persian feature Mingranina Gingranina 2013-08-07 9:03 ` Hans Hagen 2013-08-07 10:38 ` Mingranina Gingranina 2013-08-07 12:38 ` Mingranina Gingranina 2013-08-07 12:42 ` Hans Hagen 2013-08-07 14:09 ` Mingranina Gingranina 2013-08-07 17:54 ` Pablo Rodríguez 2013-08-07 20:39 ` Mingranina Gingranina 2013-08-07 13:19 ` Wolfgang Schuster 2013-08-07 20:48 ` Mingranina Gingranina 2013-08-07 17:11 ` Otared Kavian 2013-08-07 21:07 ` Mingranina Gingranina
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).