* MKIV: error, no format found with name: cont-en, aborting
@ 2019-11-13 8:51 luigi scarso
2019-11-13 9:14 ` Hans Hagen
0 siblings, 1 reply; 8+ messages in thread
From: luigi scarso @ 2019-11-13 8:51 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 743 bytes --]
sent from
context@rik.users.panix.com
Note from admin: the email is in defer state because
"Message body is too big: 159549 bytes with a limit of 100 KB"
I have kept the initial part.
"""""
Dear list,
Since the 20191029 update I have not been able to create a document via
MKIV, suffering from the subject error message (error, no format found
with name: cont-en, aborting).
I have tried cache clearing, regeneration, and complete fresh installs.
None work. I suspect it is something on my system, but cannot think of a
relevant change except possibly a Win10-64 system update.
Attached is the log from the latest install try (with filenames of
copied files removed).
LMTX has no problems.
All suggestions welcome.
--
Rik Kabel
""""""
[-- Attachment #1.2: Type: text/html, Size: 1174 bytes --]
[-- Attachment #2: Type: text/plain, Size: 493 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: MKIV: error, no format found with name: cont-en, aborting
2019-11-13 8:51 MKIV: error, no format found with name: cont-en, aborting luigi scarso
@ 2019-11-13 9:14 ` Hans Hagen
2019-11-13 14:01 ` Rik Kabel
0 siblings, 1 reply; 8+ messages in thread
From: Hans Hagen @ 2019-11-13 9:14 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 11/13/2019 9:51 AM, luigi scarso wrote:
> sent from
> ** context@rik.users.panix.com <mailto:context@rik.users.panix.com>
>
> Note from admin: the email is in defer state because
> "Message body is too big: 159549 bytes with a limit of 100 KB"
> I have kept the initial part.
>
> """""
> Dear list,
>
> Since the 20191029 update I have not been able to create a document via
> MKIV, suffering from the subject error message (error, no format found
> with name: cont-en, aborting).
>
> I have tried cache clearing, regeneration, and complete fresh installs.
> None work. I suspect it is something on my system, but cannot think of a
> relevant change except possibly a Win10-64 system update.
>
> Attached is the log from the latest install try (with filenames of
> copied files removed).
>
> LMTX has no problems.
>
> All suggestions welcome.
Also with todays version?
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: MKIV: error, no format found with name: cont-en, aborting
2019-11-13 9:14 ` Hans Hagen
@ 2019-11-13 14:01 ` Rik Kabel
2019-11-13 15:15 ` Hans Hagen
0 siblings, 1 reply; 8+ messages in thread
From: Rik Kabel @ 2019-11-13 14:01 UTC (permalink / raw)
To: ntg-context
On 11/13/2019 04:14, Hans Hagen wrote:
> On 11/13/2019 9:51 AM, luigi scarso wrote:
>> sent from
>> ** context@rik.users.panix.com <mailto:context@rik.users.panix.com>
>>
>> Note from admin: the email is in defer state because
>> "Message body is too big: 159549 bytes with a limit of 100 KB"
>> I have kept the initial part.
>>
>> """""
>> Dear list,
>>
>> Since the 20191029 update I have not been able to create a document via
>> MKIV, suffering from the subject error message (error, no format found
>> with name: cont-en, aborting).
>>
>> I have tried cache clearing, regeneration, and complete fresh installs.
>> None work. I suspect it is something on my system, but cannot think of a
>> relevant change except possibly a Win10-64 system update.
>>
>> Attached is the log from the latest install try (with filenames of
>> copied files removed).
>>
>> LMTX has no problems.
>>
>> All suggestions welcome.
> Also with todays version?
>
> Hans
Yes. Just did a fresh install, getting current version: 2019.11.12
23:58, and have the same result.
--
Rik
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: MKIV: error, no format found with name: cont-en, aborting
2019-11-13 14:01 ` Rik Kabel
@ 2019-11-13 15:15 ` Hans Hagen
2019-11-13 15:54 ` Rik Kabel
0 siblings, 1 reply; 8+ messages in thread
From: Hans Hagen @ 2019-11-13 15:15 UTC (permalink / raw)
To: ntg-context@ntg.nl >> mailing list for ConTeXt users
On 11/13/2019 3:01 PM, Rik Kabel wrote:
>
>
> On 11/13/2019 04:14, Hans Hagen wrote:
>> On 11/13/2019 9:51 AM, luigi scarso wrote:
>>> sent from
>>> ** context@rik.users.panix.com <mailto:context@rik.users.panix.com>
>>>
>>> Note from admin: the email is in defer state because
>>> "Message body is too big: 159549 bytes with a limit of 100 KB"
>>> I have kept the initial part.
>>>
>>> """""
>>> Dear list,
>>>
>>> Since the 20191029 update I have not been able to create a document via
>>> MKIV, suffering from the subject error message (error, no format found
>>> with name: cont-en, aborting).
>>>
>>> I have tried cache clearing, regeneration, and complete fresh installs.
>>> None work. I suspect it is something on my system, but cannot think of a
>>> relevant change except possibly a Win10-64 system update.
>>>
>>> Attached is the log from the latest install try (with filenames of
>>> copied files removed).
>>>
>>> LMTX has no problems.
>>>
>>> All suggestions welcome.
>> Also with todays version?
>>
>> Hans
>
> Yes. Just did a fresh install, getting current version: 2019.11.12
> 23:58, and have the same result.
any messages? there should be something
resolvers | formats |
resolvers | formats | format path :
c:/data/develop/tex-context/tex/texmf-cache/luatex-cache/context/764bd4e1ce0f004ab3cec90018f8b80a/formats/luametatex
resolvers | formats | luatex engine : luametatex
resolvers | formats | lua startup file :
c:/data/develop/context/sources/luat-cod.lua
resolvers | formats | context file :
c:/data/develop/context/sources/cont-en.mkxl
resolvers | formats | run time : 10.141 seconds
resolvers | formats | return value : okay
resolvers | formats |
at the end (or some not found messages)
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: MKIV: error, no format found with name: cont-en, aborting
2019-11-13 15:15 ` Hans Hagen
@ 2019-11-13 15:54 ` Rik Kabel
2019-11-13 16:14 ` Hans Hagen
0 siblings, 1 reply; 8+ messages in thread
From: Rik Kabel @ 2019-11-13 15:54 UTC (permalink / raw)
To: ntg-context
[-- Attachment #1.1: Type: text/plain, Size: 7534 bytes --]
On 11/13/2019 10:15, Hans Hagen wrote:
> On 11/13/2019 3:01 PM, Rik Kabel wrote:
>>
>>
>> On 11/13/2019 04:14, Hans Hagen wrote:
>>> On 11/13/2019 9:51 AM, luigi scarso wrote:
>>>> sent from
>>>> ** context@rik.users.panix.com
>>>> <mailto:context@rik.users.panix.com>
>>>>
>>>> Note from admin: the email is in defer state because
>>>> "Message body is too big: 159549 bytes with a limit of 100 KB"
>>>> I have kept the initial part.
>>>>
>>>> """""
>>>> Dear list,
>>>>
>>>> Since the 20191029 update I have not been able to create a document
>>>> via
>>>> MKIV, suffering from the subject error message (error, no format found
>>>> with name: cont-en, aborting).
>>>>
>>>> I have tried cache clearing, regeneration, and complete fresh
>>>> installs.
>>>> None work. I suspect it is something on my system, but cannot think
>>>> of a
>>>> relevant change except possibly a Win10-64 system update.
>>>>
>>>> Attached is the log from the latest install try (with filenames of
>>>> copied files removed).
>>>>
>>>> LMTX has no problems.
>>>>
>>>> All suggestions welcome.
>>> Also with todays version?
>>>
>>> Hans
>>
>> Yes. Just did a fresh install, getting current version: 2019.11.12
>> 23:58, and have the same result.
> any messages? there should be something
>
> resolvers | formats |
> resolvers | formats | format path :
> c:/data/develop/tex-context/tex/texmf-cache/luatex-cache/context/764bd4e1ce0f004ab3cec90018f8b80a/formats/luametatex
> resolvers | formats | luatex engine : luametatex
> resolvers | formats | lua startup file :
> c:/data/develop/context/sources/luat-cod.lua
> resolvers | formats | context file :
> c:/data/develop/context/sources/cont-en.mkxl
> resolvers | formats | run time : 10.141 seconds
> resolvers | formats | return value : okay
> resolvers | formats |
>
> at the end (or some not found messages)
>
> Hans
>
> -----------------------------------------------------------------
> Hans Hagen | PRAGMA ADE
> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
> tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
> -----------------------------------------------------------------
> ___________________________________________________________________________________
>
> If your question is of interest to others as well, please add an entry
> to the Wiki!
>
> maillist : ntg-context@ntg.nl /
> http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://context.aanhet.net
> archive : https://bitbucket.org/phg/context-mirror/commits/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
>
I get the following (grepping for resolvers.*formats) from the install:
resolvers | formats | using tex source file
'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv'
resolvers | formats | using specification file
'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/context.lus'
resolvers | formats | using tex source path
'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv'
resolvers | formats | changing to format path
'c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex'
resolvers | formats | executing runner 'make luatex format':
luatex --ini
--lua=c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua
c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv \dump
resolvers | formats |
resolvers | formats | format path :
c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex
resolvers | formats | luatex engine : luatex
resolvers | formats | lua startup file :
c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua
resolvers | formats | context file :
c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv
resolvers | formats | run time : 1.513 seconds
resolvers | formats | return value : error
resolvers | formats |
resolvers | formats | using tex source file
'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv'
resolvers | formats | using specification file
'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/context.lus'
resolvers | formats | using tex source path
'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv'
resolvers | formats | changing to format path
'c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex'
resolvers | formats | executing runner 'make luatex format':
luatex --ini
--lua=c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua
c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv \dump
resolvers | formats |
resolvers | formats | format path :
c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex
resolvers | formats | luatex engine : luatex
resolvers | formats | lua startup file :
c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua
resolvers | formats | context file :
c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv
resolvers | formats | run time : 1.733 seconds
resolvers | formats | return value : error
resolvers | formats |
and from an attempted compile, I get:
resolvers | formats | using tex source file
'C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv'
resolvers | formats | using specification file
'C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/context.lus'
resolvers | formats | using tex source path
'C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv'
resolvers | formats | changing to format path
'C:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex'
resolvers | formats | executing runner 'make luatex format':
luatex --ini
--lua=C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua
C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv \dump
resolvers | formats |
resolvers | formats | format path :
C:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex
resolvers | formats | luatex engine : luatex
resolvers | formats | lua startup file :
C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua
resolvers | formats | context file :
C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv
resolvers | formats | run time : 1.045 seconds
resolvers | formats | return value : error
resolvers | formats |
--
Rik
[-- Attachment #1.2: Type: text/html, Size: 10490 bytes --]
[-- Attachment #2: Type: text/plain, Size: 493 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: MKIV: error, no format found with name: cont-en, aborting
2019-11-13 15:54 ` Rik Kabel
@ 2019-11-13 16:14 ` Hans Hagen
2019-11-13 17:09 ` Rik Kabel
0 siblings, 1 reply; 8+ messages in thread
From: Hans Hagen @ 2019-11-13 16:14 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 11/13/2019 4:54 PM, Rik Kabel wrote:
> On 11/13/2019 10:15, Hans Hagen wrote:
>> On 11/13/2019 3:01 PM, Rik Kabel wrote:
>>>
>>>
>>> On 11/13/2019 04:14, Hans Hagen wrote:
>>>> On 11/13/2019 9:51 AM, luigi scarso wrote:
>>>>> sent from
>>>>> ** context@rik.users.panix.com <mailto:context@rik.users.panix.com>
>>>>>
>>>>> Note from admin: the email is in defer state because
>>>>> "Message body is too big: 159549 bytes with a limit of 100 KB"
>>>>> I have kept the initial part.
>>>>>
>>>>> """""
>>>>> Dear list,
>>>>>
>>>>> Since the 20191029 update I have not been able to create a document
>>>>> via
>>>>> MKIV, suffering from the subject error message (error, no format found
>>>>> with name: cont-en, aborting).
>>>>>
>>>>> I have tried cache clearing, regeneration, and complete fresh
>>>>> installs.
>>>>> None work. I suspect it is something on my system, but cannot think
>>>>> of a
>>>>> relevant change except possibly a Win10-64 system update.
>>>>>
>>>>> Attached is the log from the latest install try (with filenames of
>>>>> copied files removed).
>>>>>
>>>>> LMTX has no problems.
>>>>>
>>>>> All suggestions welcome.
>>>> Also with todays version?
>>>>
>>>> Hans
>>>
>>> Yes. Just did a fresh install, getting current version: 2019.11.12
>>> 23:58, and have the same result.
>> any messages? there should be something
>>
>> resolvers | formats |
>> resolvers | formats | format path :
>> c:/data/develop/tex-context/tex/texmf-cache/luatex-cache/context/764bd4e1ce0f004ab3cec90018f8b80a/formats/luametatex
>> resolvers | formats | luatex engine : luametatex
>> resolvers | formats | lua startup file :
>> c:/data/develop/context/sources/luat-cod.lua
>> resolvers | formats | context file :
>> c:/data/develop/context/sources/cont-en.mkxl
>> resolvers | formats | run time : 10.141 seconds
>> resolvers | formats | return value : okay
>> resolvers | formats |
>>
>> at the end (or some not found messages)
>>
>> Hans
>>
>> -----------------------------------------------------------------
>> Hans Hagen | PRAGMA ADE
>> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
>> tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
>> -----------------------------------------------------------------
>> ___________________________________________________________________________________
>>
>> If your question is of interest to others as well, please add an entry
>> to the Wiki!
>>
>> maillist : ntg-context@ntg.nl /
>> http://www.ntg.nl/mailman/listinfo/ntg-context
>> webpage : http://www.pragma-ade.nl / http://context.aanhet.net
>> archive : https://bitbucket.org/phg/context-mirror/commits/
>> wiki : http://contextgarden.net
>> ___________________________________________________________________________________
>>
>
> I get the following (grepping for resolvers.*formats) from the install:
>
> resolvers | formats | using tex source file
> 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv'
> resolvers | formats | using specification file
> 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/context.lus'
> resolvers | formats | using tex source path
> 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv'
> resolvers | formats | changing to format path
> 'c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex'
> resolvers | formats | executing runner 'make luatex format':
> luatex --ini
> --lua=c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv
> \dump
> resolvers | formats |
> resolvers | formats | format path :
> c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex
> resolvers | formats | luatex engine : luatex
> resolvers | formats | lua startup file :
> c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua
> resolvers | formats | context file :
> c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv
> resolvers | formats | run time : 1.513 seconds
> resolvers | formats | return value : error
> resolvers | formats |
> resolvers | formats | using tex source file
> 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv'
> resolvers | formats | using specification file
> 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/context.lus'
> resolvers | formats | using tex source path
> 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv'
> resolvers | formats | changing to format path
> 'c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex'
> resolvers | formats | executing runner 'make luatex format':
> luatex --ini
> --lua=c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv
> \dump
> resolvers | formats |
> resolvers | formats | format path :
> c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex
> resolvers | formats | luatex engine : luatex
> resolvers | formats | lua startup file :
> c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua
> resolvers | formats | context file :
> c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv
> resolvers | formats | run time : 1.733 seconds
> resolvers | formats | return value : error
> resolvers | formats |
>
> and from an attempted compile, I get:
>
> resolvers | formats | using tex source file
> 'C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv'
> resolvers | formats | using specification file
> 'C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/context.lus'
> resolvers | formats | using tex source path
> 'C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv'
> resolvers | formats | changing to format path
> 'C:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex'
> resolvers | formats | executing runner 'make luatex format':
> luatex --ini
> --lua=C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv
> \dump
> resolvers | formats |
> resolvers | formats | format path :
> C:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex
> resolvers | formats | luatex engine : luatex
> resolvers | formats | lua startup file :
> C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua
> resolvers | formats | context file :
> C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv
> resolvers | formats | run time : 1.045 seconds
> resolvers | formats | return value : error
> resolvers | formats |
ok, so how do you run ? with the full path?
can you test with --addbinarypath
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: MKIV: error, no format found with name: cont-en, aborting
2019-11-13 16:14 ` Hans Hagen
@ 2019-11-13 17:09 ` Rik Kabel
2019-11-14 19:08 ` Rik Kabel
0 siblings, 1 reply; 8+ messages in thread
From: Rik Kabel @ 2019-11-13 17:09 UTC (permalink / raw)
To: ntg-context
On 11/13/2019 11:14, Hans Hagen wrote:
> On 11/13/2019 4:54 PM, Rik Kabel wrote:
>> On 11/13/2019 10:15, Hans Hagen wrote:
>>> On 11/13/2019 3:01 PM, Rik Kabel wrote:
>>>>
>>>>
>>>> On 11/13/2019 04:14, Hans Hagen wrote:
>>>>> On 11/13/2019 9:51 AM, luigi scarso wrote:
>>>>>> sent from
>>>>>> ** context@rik.users.panix.com <mailto:context@rik.users.panix.com>
>>>>>>
>>>>>> Note from admin: the email is in defer state because
>>>>>> "Message body is too big: 159549 bytes with a limit of 100 KB"
>>>>>> I have kept the initial part.
>>>>>>
>>>>>> """""
>>>>>> Dear list,
>>>>>>
>>>>>> Since the 20191029 update I have not been able to create a
>>>>>> document via
>>>>>> MKIV, suffering from the subject error message (error, no format
>>>>>> found
>>>>>> with name: cont-en, aborting).
>>>>>>
>>>>>> I have tried cache clearing, regeneration, and complete fresh
>>>>>> installs.
>>>>>> None work. I suspect it is something on my system, but cannot
>>>>>> think of a
>>>>>> relevant change except possibly a Win10-64 system update.
>>>>>>
>>>>>> Attached is the log from the latest install try (with filenames of
>>>>>> copied files removed).
>>>>>>
>>>>>> LMTX has no problems.
>>>>>>
>>>>>> All suggestions welcome.
>>>>> Also with todays version?
>>>>>
>>>>> Hans
>>>>
>>>> Yes. Just did a fresh install, getting current version: 2019.11.12
>>>> 23:58, and have the same result.
>>> any messages? there should be something
>>>
>>> resolvers | formats |
>>> resolvers | formats | format path :
>>> c:/data/develop/tex-context/tex/texmf-cache/luatex-cache/context/764bd4e1ce0f004ab3cec90018f8b80a/formats/luametatex
>>> resolvers | formats | luatex engine : luametatex
>>> resolvers | formats | lua startup file :
>>> c:/data/develop/context/sources/luat-cod.lua
>>> resolvers | formats | context file :
>>> c:/data/develop/context/sources/cont-en.mkxl
>>> resolvers | formats | run time : 10.141 seconds
>>> resolvers | formats | return value : okay
>>> resolvers | formats |
>>>
>>> at the end (or some not found messages)
>>>
>>> Hans
>>>
>>> -----------------------------------------------------------------
>>> Hans Hagen | PRAGMA ADE
>>> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
>>> tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
>>> -----------------------------------------------------------------
>>> ___________________________________________________________________________________
>>>
>>> If your question is of interest to others as well, please add an
>>> entry to the Wiki!
>>>
>>> maillist : ntg-context@ntg.nl /
>>> http://www.ntg.nl/mailman/listinfo/ntg-context
>>> webpage : http://www.pragma-ade.nl / http://context.aanhet.net
>>> archive : https://bitbucket.org/phg/context-mirror/commits/
>>> wiki : http://contextgarden.net
>>> ___________________________________________________________________________________
>>>
>>
>> I get the following (grepping for resolvers.*formats) from the install:
>>
>> resolvers | formats | using tex source file
>> 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv'
>> resolvers | formats | using specification file
>> 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/context.lus'
>> resolvers | formats | using tex source path
>> 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv'
>> resolvers | formats | changing to format path
>> 'c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex'
>> resolvers | formats | executing runner 'make luatex format':
>> luatex --ini
>> --lua=c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua
>> c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv
>> \dump
>> resolvers | formats |
>> resolvers | formats | format path :
>> c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex
>> resolvers | formats | luatex engine : luatex
>> resolvers | formats | lua startup file :
>> c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua
>> resolvers | formats | context file :
>> c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv
>> resolvers | formats | run time : 1.513 seconds
>> resolvers | formats | return value : error
>> resolvers | formats |
>> resolvers | formats | using tex source file
>> 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv'
>> resolvers | formats | using specification file
>> 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/context.lus'
>> resolvers | formats | using tex source path
>> 'c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv'
>> resolvers | formats | changing to format path
>> 'c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex'
>> resolvers | formats | executing runner 'make luatex format':
>> luatex --ini
>> --lua=c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua
>> c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv
>> \dump
>> resolvers | formats |
>> resolvers | formats | format path :
>> c:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex
>> resolvers | formats | luatex engine : luatex
>> resolvers | formats | lua startup file :
>> c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua
>> resolvers | formats | context file :
>> c:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv
>> resolvers | formats | run time : 1.733 seconds
>> resolvers | formats | return value : error
>> resolvers | formats |
>>
>> and from an attempted compile, I get:
>>
>> resolvers | formats | using tex source file
>> 'C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv'
>> resolvers | formats | using specification file
>> 'C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/context.lus'
>> resolvers | formats | using tex source path
>> 'C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv'
>> resolvers | formats | changing to format path
>> 'C:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex'
>> resolvers | formats | executing runner 'make luatex format':
>> luatex --ini
>> --lua=C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua
>> C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv
>> \dump
>> resolvers | formats |
>> resolvers | formats | format path :
>> C:/ConTeXt/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex
>> resolvers | formats | luatex engine : luatex
>> resolvers | formats | lua startup file :
>> C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/luat-cod.lua
>> resolvers | formats | context file :
>> C:/ConTeXt/tex/texmf-context/tex/context/base/mkiv/cont-en.mkiv
>> resolvers | formats | run time : 1.045 seconds
>> resolvers | formats | return value : error
>> resolvers | formats |
> ok, so how do you run ? with the full path?
>
> can you test with --addbinarypath
>
> Hans
No difference with --addbinarypath. I run this from a command prompt
(within ConEmu) in which setuptex had already been run, so the path was
set properly and is the first TeX-related item in the path. The
environment also shows SETUPTEX=done.
--
Rik
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: MKIV: error, no format found with name: cont-en, aborting
2019-11-13 17:09 ` Rik Kabel
@ 2019-11-14 19:08 ` Rik Kabel
0 siblings, 0 replies; 8+ messages in thread
From: Rik Kabel @ 2019-11-14 19:08 UTC (permalink / raw)
To: ntg-context
This issue has been resolved with a new luatex dll in the Win64 bin
directory (perhaps elsewhere as well, but I only have Win64).
Thank you to all who worked on it.
--
Rik
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-11-14 19:08 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-11-13 8:51 MKIV: error, no format found with name: cont-en, aborting luigi scarso
2019-11-13 9:14 ` Hans Hagen
2019-11-13 14:01 ` Rik Kabel
2019-11-13 15:15 ` Hans Hagen
2019-11-13 15:54 ` Rik Kabel
2019-11-13 16:14 ` Hans Hagen
2019-11-13 17:09 ` Rik Kabel
2019-11-14 19:08 ` Rik Kabel
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).