* Two questions on \definefallbackfamily @ 2014-04-25 19:56 Mikael P. Sundqvist 2014-04-27 14:58 ` Wolfgang Schuster 0 siblings, 1 reply; 5+ messages in thread From: Mikael P. Sundqvist @ 2014-04-25 19:56 UTC (permalink / raw) To: mailing list for ConTeXt users Hi! 1) If i write %%% \definefontfamily [luface] [rm] [Adobe Garamond Pro][opticalsize=yes] \definefontfamily [luface] [ss] [FrutigerLTstd][opticalsize=yes] \definefallbackfamily [luface] [math] [Adobe Garamond Pro] [math:uppercasenormal] \definefallbackfamily [luface] [math] [Adobe Garamond Pro] [math:uppercaseitalic] \definefallbackfamily [luface] [math] [Adobe Garamond Pro] [math:lowercasenormal] \definefallbackfamily [luface] [math] [Adobe Garamond Pro] [math:lowercaseitalic] \definefallbackfamily [luface] [math] [Adobe Garamond Pro] [math:digitsnormal] \definefontfamily [luface] [math] [Tex Gyre Pagella Math] \definebodyfontenvironment[18pt] \setupbodyfont[luface,18pt] %%% it works well. What if I want to change TeX Gyre Pagella Math to Iwona? It turns out I cannot just change it to "Iwona", "iwona", "Iwona Math", ... Other fonts seem to work, but Iwona no? 2) Say that I change the third last line above into \definefontfamily [luface] [math] [Tex Gyre Pagella Math][scale=0.8] to make the fonts fit better in size. Then the Adobe Garamond Pro in math mode also scales with the factor 0.8, which looks bad. Is there a way to scale only the TeX Gyre Pagella Math? Adding scale=1 to the \definefallbackfamily commands does not seem to change anything. /Mikael ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Two questions on \definefallbackfamily 2014-04-25 19:56 Two questions on \definefallbackfamily Mikael P. Sundqvist @ 2014-04-27 14:58 ` Wolfgang Schuster 2014-04-28 12:38 ` Mikael P. Sundqvist 0 siblings, 1 reply; 5+ messages in thread From: Wolfgang Schuster @ 2014-04-27 14:58 UTC (permalink / raw) To: mailing list for ConTeXt users Am 25.04.2014 um 21:56 schrieb Mikael P. Sundqvist <mickep@gmail.com>: > Hi! > > 1) If i write > %%% > \definefontfamily [luface] [rm] [Adobe Garamond Pro][opticalsize=yes] > \definefontfamily [luface] [ss] [FrutigerLTstd][opticalsize=yes] > \definefallbackfamily [luface] [math] [Adobe Garamond Pro] > [math:uppercasenormal] > \definefallbackfamily [luface] [math] [Adobe Garamond Pro] > [math:uppercaseitalic] > \definefallbackfamily [luface] [math] [Adobe Garamond Pro] > [math:lowercasenormal] > \definefallbackfamily [luface] [math] [Adobe Garamond Pro] > [math:lowercaseitalic] > \definefallbackfamily [luface] [math] [Adobe Garamond Pro] [math:digitsnormal] > \definefontfamily [luface] [math] [Tex Gyre Pagella Math] > \definebodyfontenvironment[18pt] > \setupbodyfont[luface,18pt] > %%% > > it works well. What if I want to change TeX Gyre Pagella Math to > Iwona? It turns out I cannot just change it to "Iwona", "iwona", > "Iwona Math", ... Other fonts seem to work, but Iwona no? When you set a math font the command looks first if there exists a font with the requested font and when this isn’t the case it tries to load a typescript with the given name. The problem with Iwona is that there is a font with this name in TeXLive or the context suite and \definefontfamily therefore tries to load the font. Even though this isn’t enough because you need a font in the opentype math format to use it as math font and this isn’t the case for Iwona. What you can do is to use the \definetypeface command to load the iwona math font: \definetypeface [luface] [mm] [math] [iwona] [default] > 2) Say that I change the third last line above into > > \definefontfamily [luface] [math] [Tex Gyre Pagella Math][scale=0.8] > > to make the fonts fit better in size. Then the Adobe Garamond Pro in > math mode also scales with the factor 0.8, which looks bad. Is there a > way to scale only the TeX Gyre Pagella Math? Adding scale=1 to the > \definefallbackfamily commands does not seem to change anything. You have to use a value larger than 1 because size is relative to the size of the math font. \definefallbackfamily [luface] [math] [Adobe Garamond Pro] [preset=math:lowercasenormal,scale=1.25] Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Two questions on \definefallbackfamily 2014-04-27 14:58 ` Wolfgang Schuster @ 2014-04-28 12:38 ` Mikael P. Sundqvist 2014-04-28 13:02 ` Wolfgang Schuster 0 siblings, 1 reply; 5+ messages in thread From: Mikael P. Sundqvist @ 2014-04-28 12:38 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1: Type: text/plain, Size: 4279 bytes --] On Sun, Apr 27, 2014 at 4:58 PM, Wolfgang Schuster <schuster.wolfgang@gmail.com> wrote: > > Am 25.04.2014 um 21:56 schrieb Mikael P. Sundqvist <mickep@gmail.com>: > >> Hi! >> >> 1) If i write >> %%% >> \definefontfamily [luface] [rm] [Adobe Garamond Pro][opticalsize=yes] >> \definefontfamily [luface] [ss] [FrutigerLTstd][opticalsize=yes] >> \definefallbackfamily [luface] [math] [Adobe Garamond Pro] >> [math:uppercasenormal] >> \definefallbackfamily [luface] [math] [Adobe Garamond Pro] >> [math:uppercaseitalic] >> \definefallbackfamily [luface] [math] [Adobe Garamond Pro] >> [math:lowercasenormal] >> \definefallbackfamily [luface] [math] [Adobe Garamond Pro] >> [math:lowercaseitalic] >> \definefallbackfamily [luface] [math] [Adobe Garamond Pro] [math:digitsnormal] >> \definefontfamily [luface] [math] [Tex Gyre Pagella Math] >> \definebodyfontenvironment[18pt] >> \setupbodyfont[luface,18pt] >> %%% >> >> it works well. What if I want to change TeX Gyre Pagella Math to >> Iwona? It turns out I cannot just change it to "Iwona", "iwona", >> "Iwona Math", ... Other fonts seem to work, but Iwona no? > > When you set a math font the command looks first if there exists > a font with the requested font and when this isn’t the case it tries > to load a typescript with the given name. > > The problem with Iwona is that there is a font with this name > in TeXLive or the context suite and \definefontfamily therefore > tries to load the font. Even though this isn’t enough because > you need a font in the opentype math format to use it as math > font and this isn’t the case for Iwona. > > What you can do is to use the \definetypeface command to load > the iwona math font: > > \definetypeface [luface] [mm] [math] [iwona] [default] > >> 2) Say that I change the third last line above into >> >> \definefontfamily [luface] [math] [Tex Gyre Pagella Math][scale=0.8] >> >> to make the fonts fit better in size. Then the Adobe Garamond Pro in >> math mode also scales with the factor 0.8, which looks bad. Is there a >> way to scale only the TeX Gyre Pagella Math? Adding scale=1 to the >> \definefallbackfamily commands does not seem to change anything. > > > You have to use a value larger than 1 because size is relative to the size of the math font. > > \definefallbackfamily [luface] [math] [Adobe Garamond Pro] [preset=math:lowercasenormal,scale=1.25] > > Wolfgang > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ Thank you very much for your answer, Wolfgang. I can't get it to work with iwona being substituted. With the example file below all math is in iwona (see the attached file). What am I doing wrong? Best regards, Mikael PS: I know I first asked to have Garamond instead of iwona, but this was out of laziness. I'd rather try the look of FrutigerLTstd and iwona. If someone has a suggestion of a math font that could fit to Frutiger, I am all ears (this is a font used by the university). %%% Example file \definefontfamily [lundfaces] [rm] [Adobe Garamond Pro][opticalsize=yes] \definefontfamily [lundfaces] [ss] [FrutigerLTstd][opticalsize=yes] \definefallbackfamily [lundfaces] [math] [FrutigerLTstd] [math:uppercasenormal] \definefallbackfamily [lundfaces] [math] [FrutigerLTstd] [math:uppercaseitalic] \definefallbackfamily [lundfaces] [math] [FrutigerLTstd] [preset=math:lowercasenormal,scale=1.25] \definefallbackfamily [lundfaces] [math] [FrutigerLTstd] [math:lowercaseitalic] \definefallbackfamily [lundfaces] [math] [FrutigerLTstd] [math:digitsnormal] \definetypeface [lundfaces] [mm] [math] [iwona] [default] \setupbodyfont[lundfaces,ss] \starttext Hello {\em abc} $abc$ $\alpha\beta\gamma$ \startformula \int_a^b f(x)\, dx \stopformula \stoptext %%% Stop example file [-- Attachment #2: test.pdf --] [-- Type: application/pdf, Size: 38830 bytes --] [-- Attachment #3: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Two questions on \definefallbackfamily 2014-04-28 12:38 ` Mikael P. Sundqvist @ 2014-04-28 13:02 ` Wolfgang Schuster 2014-04-28 13:32 ` Mikael P. Sundqvist 0 siblings, 1 reply; 5+ messages in thread From: Wolfgang Schuster @ 2014-04-28 13:02 UTC (permalink / raw) To: mailing list for ConTeXt users Am 28.04.2014 um 14:38 schrieb Mikael P. Sundqvist <mickep@gmail.com>: > Thank you very much for your answer, Wolfgang. I can't get it to work > with iwona being substituted. > > With the example file below all math is in iwona (see the attached > file). What am I doing wrong? The fallback mechanism for math fonts does only work when you have a opentype math font but not with old type1 fonts. Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: Two questions on \definefallbackfamily 2014-04-28 13:02 ` Wolfgang Schuster @ 2014-04-28 13:32 ` Mikael P. Sundqvist 0 siblings, 0 replies; 5+ messages in thread From: Mikael P. Sundqvist @ 2014-04-28 13:32 UTC (permalink / raw) To: mailing list for ConTeXt users On Mon, Apr 28, 2014 at 3:02 PM, Wolfgang Schuster <schuster.wolfgang@gmail.com> wrote: > > Am 28.04.2014 um 14:38 schrieb Mikael P. Sundqvist <mickep@gmail.com>: > >> Thank you very much for your answer, Wolfgang. I can't get it to work >> with iwona being substituted. >> >> With the example file below all math is in iwona (see the attached >> file). What am I doing wrong? > > The fallback mechanism for math fonts does only work when you have > a opentype math font but not with old type1 fonts. > > Wolfgang > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ Ah, sorry, I missed that part. Thank you for your clarification. Mikael ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2014-04-28 13:32 UTC | newest] Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2014-04-25 19:56 Two questions on \definefallbackfamily Mikael P. Sundqvist 2014-04-27 14:58 ` Wolfgang Schuster 2014-04-28 12:38 ` Mikael P. Sundqvist 2014-04-28 13:02 ` Wolfgang Schuster 2014-04-28 13:32 ` Mikael P. Sundqvist
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).