* layers x 2
@ 2021-04-28 4:24 jbf
2021-04-28 4:44 ` Wolfgang Schuster
0 siblings, 1 reply; 5+ messages in thread
From: jbf @ 2021-04-28 4:24 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hi list,
Is it possible to place two layers on the same page? I have several
pages where that would be necessary. On the first of those pages, it did
actually work, but on the remaining other pages, the second layer, even
though located at the bottom of the page, eliminates the first layer. I
have simply set them up one after the other. As you can see, the 1st is
towards the top left of the page, while the second is bottom right.
\definelayer[blessings] % name of the layer
[x=0mm, y=0mm, % from upper left corner of paper
width=\paperwidth, height=.5\paperheight] % let the layer cover
the full paper
\setlayer[blessings] % name of the layer
[hoffset=.09\textwidth, voffset=1.7cm] % placement (from upper
left corner of the layer)
{\externalfigure[bless.eps][width=3cm]} % the actual contents of
the layer
\setupbackgrounds[page][background=blessings]
\definelayer[tree] % name of the layer
[x=0mm, y=0mm, % from upper left corner of paper
width=\paperwidth, height=\paperheight] % let the layer cover the
full paper
\setlayer[tree] % name of the layer
[hoffset=.75\textwidth, voffset=15.1cm] % placement (from upper
left corner of the layer)
{\externalfigure[Pohutukawa.jpg][width=.5\textwidth]} % the actual
contents of the layer
\setupbackgrounds[page][background=tree]
What am I doing wrong?
Julian
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: layers x 2
2021-04-28 4:24 layers x 2 jbf
@ 2021-04-28 4:44 ` Wolfgang Schuster
2021-04-28 4:53 ` jbf
0 siblings, 1 reply; 5+ messages in thread
From: Wolfgang Schuster @ 2021-04-28 4:44 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 1556 bytes --]
jbf <roma83537@gmail.com> schrieb am Mi., 28. Apr. 2021, 06:25:
> Hi list,
>
> Is it possible to place two layers on the same page? I have several
> pages where that would be necessary. On the first of those pages, it did
> actually work, but on the remaining other pages, the second layer, even
> though located at the bottom of the page, eliminates the first layer. I
> have simply set them up one after the other. As you can see, the 1st is
> towards the top left of the page, while the second is bottom right.
>
> \definelayer[blessings] % name of the layer
> [x=0mm, y=0mm, % from upper left corner of paper
> width=\paperwidth, height=.5\paperheight] % let the layer cover
> the full paper
> \setlayer[blessings] % name of the layer
> [hoffset=.09\textwidth, voffset=1.7cm] % placement (from upper
> left corner of the layer)
> {\externalfigure[bless.eps][width=3cm]} % the actual contents of
> the layer
> \setupbackgrounds[page][background=blessings]
>
> \definelayer[tree] % name of the layer
> [x=0mm, y=0mm, % from upper left corner of paper
> width=\paperwidth, height=\paperheight] % let the layer cover the
> full paper
> \setlayer[tree] % name of the layer
> [hoffset=.75\textwidth, voffset=15.1cm] % placement (from upper
> left corner of the layer)
> {\externalfigure[Pohutukawa.jpg][width=.5\textwidth]} % the actual
> contents of the layer
> \setupbackgrounds[page][background=tree]
>
> What am I doing wrong?
>
\setupbackgrounds [page] [background={blessings,trees}]
Wolfgang
[-- Attachment #1.2: Type: text/html, Size: 2298 bytes --]
[-- Attachment #2: Type: text/plain, Size: 493 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: layers x 2
2021-04-28 4:44 ` Wolfgang Schuster
@ 2021-04-28 4:53 ` jbf
2021-04-28 4:58 ` Wolfgang Schuster
0 siblings, 1 reply; 5+ messages in thread
From: jbf @ 2021-04-28 4:53 UTC (permalink / raw)
To: Wolfgang Schuster; +Cc: ntg >> mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 2737 bytes --]
It is not clear to me. I have two \setupbackgrounds as you can see. If I
put setupbackgrounds[page][background=blessings,tree] for the first one
I get the tree but not the blessing graphic. If I also have the same for
the second one (\setupbackgrounds[page][background=blessings,tree]) I
get the blessings graphic but not the tree! I want both obviously. Sorry
for being obtuse.
Julian
On 28/4/21 2:44 pm, Wolfgang Schuster wrote:
>
> jbf <roma83537@gmail.com <mailto:roma83537@gmail.com>> schrieb am Mi.,
> 28. Apr. 2021, 06:25:
>
> Hi list,
>
> Is it possible to place two layers on the same page? I have several
> pages where that would be necessary. On the first of those pages,
> it did
> actually work, but on the remaining other pages, the second layer,
> even
> though located at the bottom of the page, eliminates the first
> layer. I
> have simply set them up one after the other. As you can see, the
> 1st is
> towards the top left of the page, while the second is bottom right.
>
> \definelayer[blessings] % name of the layer
> [x=0mm, y=0mm, % from upper left corner of paper
> width=\paperwidth, height=.5\paperheight] % let the layer cover
> the full paper
> \setlayer[blessings] % name of the layer
> [hoffset=.09\textwidth, voffset=1.7cm] % placement (from upper
> left corner of the layer)
> {\externalfigure[bless.eps][width=3cm]} % the actual
> contents of
> the layer
> \setupbackgrounds[page][background=blessings]
>
> \definelayer[tree] % name of the layer
> [x=0mm, y=0mm, % from upper left corner of paper
> width=\paperwidth, height=\paperheight] % let the layer
> cover the
> full paper
> \setlayer[tree] % name of the layer
> [hoffset=.75\textwidth, voffset=15.1cm] % placement (from upper
> left corner of the layer)
> {\externalfigure[Pohutukawa.jpg][width=.5\textwidth]} % the actual
> contents of the layer
> \setupbackgrounds[page][background=tree]
>
> What am I doing wrong?
>
>
>
> \setupbackgrounds [page] [background={blessings,trees}]
>
> Wolfgang
>
>
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://context.aanhet.net
> archive : https://bitbucket.org/phg/context-mirror/commits/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
[-- Attachment #1.2: Type: text/html, Size: 5183 bytes --]
[-- Attachment #2: Type: text/plain, Size: 493 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: layers x 2
2021-04-28 4:53 ` jbf
@ 2021-04-28 4:58 ` Wolfgang Schuster
2021-04-28 5:10 ` jbf
0 siblings, 1 reply; 5+ messages in thread
From: Wolfgang Schuster @ 2021-04-28 4:58 UTC (permalink / raw)
To: jbf; +Cc: ntg >> mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 2764 bytes --]
Move both \definelayer and \setupbackgrounds to the start of the document
and put braces ({...}) around the list entry.
Wolfgang
jbf <roma83537@gmail.com> schrieb am Mi., 28. Apr. 2021, 06:53:
> It is not clear to me. I have two \setupbackgrounds as you can see. If I
> put setupbackgrounds[page][background=blessings,tree] for the first one I
> get the tree but not the blessing graphic. If I also have the same for the
> second one (\setupbackgrounds[page][background=blessings,tree]) I get the
> blessings graphic but not the tree! I want both obviously. Sorry for being
> obtuse.
>
> Julian
> On 28/4/21 2:44 pm, Wolfgang Schuster wrote:
>
>
> jbf <roma83537@gmail.com> schrieb am Mi., 28. Apr. 2021, 06:25:
>
>> Hi list,
>>
>> Is it possible to place two layers on the same page? I have several
>> pages where that would be necessary. On the first of those pages, it did
>> actually work, but on the remaining other pages, the second layer, even
>> though located at the bottom of the page, eliminates the first layer. I
>> have simply set them up one after the other. As you can see, the 1st is
>> towards the top left of the page, while the second is bottom right.
>>
>> \definelayer[blessings] % name of the layer
>> [x=0mm, y=0mm, % from upper left corner of paper
>> width=\paperwidth, height=.5\paperheight] % let the layer cover
>> the full paper
>> \setlayer[blessings] % name of the layer
>> [hoffset=.09\textwidth, voffset=1.7cm] % placement (from upper
>> left corner of the layer)
>> {\externalfigure[bless.eps][width=3cm]} % the actual contents of
>> the layer
>> \setupbackgrounds[page][background=blessings]
>>
>> \definelayer[tree] % name of the layer
>> [x=0mm, y=0mm, % from upper left corner of paper
>> width=\paperwidth, height=\paperheight] % let the layer cover the
>> full paper
>> \setlayer[tree] % name of the layer
>> [hoffset=.75\textwidth, voffset=15.1cm] % placement (from upper
>> left corner of the layer)
>> {\externalfigure[Pohutukawa.jpg][width=.5\textwidth]} % the actual
>> contents of the layer
>> \setupbackgrounds[page][background=tree]
>>
>> What am I doing wrong?
>>
>
>
> \setupbackgrounds [page] [background={blessings,trees}]
>
> Wolfgang
>
>
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://context.aanhet.net
> archive : https://bitbucket.org/phg/context-mirror/commits/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
>
>
[-- Attachment #1.2: Type: text/html, Size: 5449 bytes --]
[-- Attachment #2: Type: text/plain, Size: 493 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: layers x 2
2021-04-28 4:58 ` Wolfgang Schuster
@ 2021-04-28 5:10 ` jbf
0 siblings, 0 replies; 5+ messages in thread
From: jbf @ 2021-04-28 5:10 UTC (permalink / raw)
To: Wolfgang Schuster; +Cc: mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 3660 bytes --]
Thanks, it was particularly the braces that I had overlooked.
Julian
On 28/4/21 2:58 pm, Wolfgang Schuster wrote:
> Move both \definelayer and \setupbackgrounds to the start of the
> document and put braces ({...}) around the list entry.
>
> Wolfgang
>
> jbf <roma83537@gmail.com <mailto:roma83537@gmail.com>> schrieb am Mi.,
> 28. Apr. 2021, 06:53:
>
> It is not clear to me. I have two \setupbackgrounds as you can
> see. If I put setupbackgrounds[page][background=blessings,tree]
> for the first one I get the tree but not the blessing graphic. If
> I also have the same for the second one
> (\setupbackgrounds[page][background=blessings,tree]) I get the
> blessings graphic but not the tree! I want both obviously. Sorry
> for being obtuse.
>
> Julian
>
> On 28/4/21 2:44 pm, Wolfgang Schuster wrote:
>>
>> jbf <roma83537@gmail.com <mailto:roma83537@gmail.com>> schrieb am
>> Mi., 28. Apr. 2021, 06:25:
>>
>> Hi list,
>>
>> Is it possible to place two layers on the same page? I have
>> several
>> pages where that would be necessary. On the first of those
>> pages, it did
>> actually work, but on the remaining other pages, the second
>> layer, even
>> though located at the bottom of the page, eliminates the
>> first layer. I
>> have simply set them up one after the other. As you can see,
>> the 1st is
>> towards the top left of the page, while the second is bottom
>> right.
>>
>> \definelayer[blessings] % name of the layer
>> [x=0mm, y=0mm, % from upper left corner of paper
>> width=\paperwidth, height=.5\paperheight] % let the
>> layer cover
>> the full paper
>> \setlayer[blessings] % name of the layer
>> [hoffset=.09\textwidth, voffset=1.7cm] % placement
>> (from upper
>> left corner of the layer)
>> {\externalfigure[bless.eps][width=3cm]} % the actual
>> contents of
>> the layer
>> \setupbackgrounds[page][background=blessings]
>>
>> \definelayer[tree] % name of the layer
>> [x=0mm, y=0mm, % from upper left corner of paper
>> width=\paperwidth, height=\paperheight] % let the layer
>> cover the
>> full paper
>> \setlayer[tree] % name of the layer
>> [hoffset=.75\textwidth, voffset=15.1cm] % placement
>> (from upper
>> left corner of the layer)
>> {\externalfigure[Pohutukawa.jpg][width=.5\textwidth]} % the
>> actual
>> contents of the layer
>> \setupbackgrounds[page][background=tree]
>>
>> What am I doing wrong?
>>
>>
>>
>> \setupbackgrounds [page] [background={blessings,trees}]
>>
>> Wolfgang
>>
>>
>> ___________________________________________________________________________________
>> If your question is of interest to others as well, please add an entry to the Wiki!
>>
>> maillist :ntg-context@ntg.nl <mailto:ntg-context@ntg.nl> /http://www.ntg.nl/mailman/listinfo/ntg-context <http://www.ntg.nl/mailman/listinfo/ntg-context>
>> webpage :http://www.pragma-ade.nl <http://www.pragma-ade.nl> /http://context.aanhet.net <http://context.aanhet.net>
>> archive :https://bitbucket.org/phg/context-mirror/commits/ <https://bitbucket.org/phg/context-mirror/commits/>
>> wiki :http://contextgarden.net <http://contextgarden.net>
>> ___________________________________________________________________________________
>
[-- Attachment #1.2: Type: text/html, Size: 7085 bytes --]
[-- Attachment #2: Type: text/plain, Size: 493 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2021-04-28 5:10 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-04-28 4:24 layers x 2 jbf
2021-04-28 4:44 ` Wolfgang Schuster
2021-04-28 4:53 ` jbf
2021-04-28 4:58 ` Wolfgang Schuster
2021-04-28 5:10 ` jbf
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).