* layout space between paper and text
@ 2012-01-17 11:38 Pavel Dohnal
2012-01-17 13:43 ` Vladimir Lomov
2012-01-17 18:39 ` Wolfgang Schuster
0 siblings, 2 replies; 4+ messages in thread
From: Pavel Dohnal @ 2012-01-17 11:38 UTC (permalink / raw)
To: ntg-context
[-- Attachment #1.1: Type: text/plain, Size: 719 bytes --]
Hello,
I want to have 10mm space between rim of the paper and beginig of the text.
This is my layout:
\definelayout[normal][
bottompace=0mm,
footerheight=6mm,
footerdistance=0mm,
bottomdistance=0mm,
bottomspace=0mm,
topdistance=0mm,
topspace=0mm,
headerheight=60mm,
headerdistance=0mm,
leftedgewidth=0mm,
leftmargin=10mm,
leftedgedistance=0mm,
leftmargindistance=0mm,
backspace=10mm,
rightedge=0mm,
rightmargin=10mm,
cutspace=0mm,
rightmargindistance=0mm,
rightedgedistance=0mm,
width=277mm,
height=210mm
]
\setuplayout[normal]
After printing is space in left 10mm, but space between top rim of the
paper and top text is 14mm. Why is that? How to setup my layout to have
exactly 10 mm both in top and in left?
[-- Attachment #1.2: Type: text/html, Size: 2317 bytes --]
[-- Attachment #2: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: layout space between paper and text
2012-01-17 11:38 layout space between paper and text Pavel Dohnal
@ 2012-01-17 13:43 ` Vladimir Lomov
2012-01-17 18:39 ` Wolfgang Schuster
1 sibling, 0 replies; 4+ messages in thread
From: Vladimir Lomov @ 2012-01-17 13:43 UTC (permalink / raw)
To: ntg-context
Hello,
** Pavel Dohnal [2012-01-17 12:38:11 +0100]:
> Hello,
> I want to have 10mm space between rim of the paper and beginig of the text.
> This is my layout:
> \definelayout[normal][
> bottompace=0mm,
> footerheight=6mm,
> footerdistance=0mm,
> bottomdistance=0mm,
> bottomspace=0mm,
> topdistance=0mm,
> topspace=0mm,
> headerheight=60mm,
> headerdistance=0mm,
> leftedgewidth=0mm,
> leftmargin=10mm,
> leftedgedistance=0mm,
> leftmargindistance=0mm,
> backspace=10mm,
> rightedge=0mm,
> rightmargin=10mm,
> cutspace=0mm,
> rightmargindistance=0mm,
> rightedgedistance=0mm,
> width=277mm,
> height=210mm
> ]
> \setuplayout[normal]
> After printing is space in left 10mm, but space between top rim of the
> paper and top text is 14mm. Why is that? How to setup my layout to have
> exactly 10 mm both in top and in left?
I'm not sure what precisely you want to achive but take a look on this
example
<example file="ex.tex">
\setuplayout
[backspace=2.1cm,
cutspace=2.1cm,
width=middle,
topspace=2.97cm,
bottomspace=2.97cm,
height=middle]
\showframe
\starttext
\input tufte
\showlayout
\stoptext
</example>
(I don't remember from where I took it) and read wiki:
http://wiki.contextgarden.net/Layout
---
WBR, Vladimir Lomov
--
At the source of every error which is blamed on the computer you will find
at least two human errors, including the error of blaming it on the computer.
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: layout space between paper and text
2012-01-17 11:38 layout space between paper and text Pavel Dohnal
2012-01-17 13:43 ` Vladimir Lomov
@ 2012-01-17 18:39 ` Wolfgang Schuster
2012-01-17 19:48 ` Hans Hagen
1 sibling, 1 reply; 4+ messages in thread
From: Wolfgang Schuster @ 2012-01-17 18:39 UTC (permalink / raw)
To: mailing list for ConTeXt users
Am 17.01.2012 um 12:38 schrieb Pavel Dohnal:
> Hello,
> I want to have 10mm space between rim of the paper and beginig of the text. This is my layout:
>
> \definelayout[normal][
> bottompace=0mm,
> footerheight=6mm,
> footerdistance=0mm,
> bottomdistance=0mm,
> bottomspace=0mm,
> topdistance=0mm,
> topspace=0mm,
> headerheight=60mm,
> headerdistance=0mm,
> leftedgewidth=0mm,
> leftmargin=10mm,
> leftedgedistance=0mm,
> leftmargindistance=0mm,
> backspace=10mm,
> rightedge=0mm,
> rightmargin=10mm,
> cutspace=0mm,
> rightmargindistance=0mm,
> rightedgedistance=0mm,
> width=277mm,
> height=210mm
> ]
> \setuplayout[normal]
> After printing is space in left 10mm, but space between top rim of the paper and top text is 14mm. Why is that? How to setup my layout to have exactly 10 mm both in top and in left?
When you want to set all values to zero and only a few to certain value you first clone the “page” layout (where everything is zero) and set then the rest to desired value.
The horizontal dimensions are determined by the three values
- backspace (distance from the left/inner margin)
- cutspace (distance from the right/outer margin)
- width (width of the textblock)
Normally you need only two values because when you set backspace + width the cutspace is calculated and when you set backspace + cutspace you can write width=middle and the width of the text block will be calculated.
The vertical dimensions are calculated also three values
- topspace (distance from the top margin)
- bottomspace (distance from the bottom margin)
- height (height of the textblock)
You need here also only two value, topspace + height which all calculate the bottomspace or topspace + bottomspace in combination with height=middle.
I haven’t mentioned the header and footer above because they are part of the textblock and will take space from this area.
When you use the information above for a layout you need
\definelayout
[middle]
[page]
[backspace=10mm,
topspace=10mm,
height=210mm,
height=277mm]
\setuplayout[middle]
\showframe[text][text]
\starttext
\dorecurse{10}{\input knuth\par}
\stoptext
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread* Re: layout space between paper and text
2012-01-17 18:39 ` Wolfgang Schuster
@ 2012-01-17 19:48 ` Hans Hagen
0 siblings, 0 replies; 4+ messages in thread
From: Hans Hagen @ 2012-01-17 19:48 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 17-1-2012 19:39, Wolfgang Schuster wrote:
> When you want to set all values to zero and only a few to certain value you first clone the “page” layout (where everything is zero) and set then the rest to desired value.
>
>
> The horizontal dimensions are determined by the three values
>
> - backspace (distance from the left/inner margin)
> - cutspace (distance from the right/outer margin)
> - width (width of the textblock)
>
> Normally you need only two values because when you set backspace + width the cutspace is calculated and when you set backspace + cutspace you can write width=middle and the width of the text block will be calculated.
>
>
> The vertical dimensions are calculated also three values
>
> - topspace (distance from the top margin)
> - bottomspace (distance from the bottom margin)
> - height (height of the textblock)
>
> You need here also only two value, topspace + height which all calculate the bottomspace or topspace + bottomspace in combination with height=middle.
>
>
> I haven’t mentioned the header and footer above because they are part of the textblock and will take space from this area.
>
>
> When you use the information above for a layout you need
>
> \definelayout
> [middle]
> [page]
> [backspace=10mm,
> topspace=10mm,
> height=210mm,
> height=277mm]
>
> \setuplayout[middle]
>
> \showframe[text][text]
>
> \starttext
> \dorecurse{10}{\input knuth\par}
> \stoptext
nice tip ... up to Pavel to wikify this ...
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2012-01-17 19:48 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-01-17 11:38 layout space between paper and text Pavel Dohnal
2012-01-17 13:43 ` Vladimir Lomov
2012-01-17 18:39 ` Wolfgang Schuster
2012-01-17 19:48 ` Hans Hagen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).