* gnuplot with ConTeXt standalone
@ 2012-06-05 15:00 Xiao-Yong Jin
2012-06-06 7:47 ` Mojca Miklavec
2012-06-06 7:49 ` Hans Hagen
0 siblings, 2 replies; 7+ messages in thread
From: Xiao-Yong Jin @ 2012-06-05 15:00 UTC (permalink / raw)
To: ntg-context
Hi,
I just tried out the ConTeXt standalone and found out it did not work with
my gnuplot files. I have been using texlive 2011, which works fine. With
the "context" command from standalone, the following error occurs,
----- Error begins -----
! Undefined control sequence.
system > tex > error on line 4 in file /Users/jin/pkgs/ConTeXt/tex/texmf-context/tex/context/base/cont-yes.mkiv: Undefined control sequence ...
1 %D \module
2 %D [ file=cont-yes,
3 %D version=2012.06.01,
4 >> %D title=\CONTEXT\ Miscellaneous Macros,
5 %D subtitle=Startup Stub,
6 %D author=Hans Hagen,
7 %D date=\currentdate,
8 %D copyright={PRAGMA ADE \& \CONTEXT\ Development Team}]
9 %C
10 %C This module is part of the \CONTEXT\ macro||package and is
11 %C therefore copyrighted by \PRAGMA. See mreadme.pdf for
12 %C details.
13
14 % At some point I will reconsider the \starttext .. \stoptext
\startGNUPLOTpage ->\begingroup \obeyMPlines
\dostartGNUPLOTpage
l.4 \startGNUPLOTpage
----- Error ends -----
I am not really sure which line is the error. Please excuse me if I pasted too much.
The version of context from the standalone is
ConTeXt ver: 2012.06.05 09:16 MKIV fmt: 2012.6.5 int: english/english
As I have mentioned, the same file works fine with context in texlive 2011, which has
version
ConTeXt ver: 2011.05.18 18:04 MKIV fmt: 2012.4.5 int: english/english
It looks like only two weeks difference. I thought I should pass along this issue to
experts on the list.
Thanks,
Xiao-Yong
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: gnuplot with ConTeXt standalone
2012-06-05 15:00 gnuplot with ConTeXt standalone Xiao-Yong Jin
@ 2012-06-06 7:47 ` Mojca Miklavec
2012-06-06 8:02 ` Mojca Miklavec
2012-06-06 7:49 ` Hans Hagen
1 sibling, 1 reply; 7+ messages in thread
From: Mojca Miklavec @ 2012-06-06 7:47 UTC (permalink / raw)
To: mailing list for ConTeXt users
On Tue, Jun 5, 2012 at 5:00 PM, Xiao-Yong Jin wrote:
> Hi,
>
> I just tried out the ConTeXt standalone and found out it did not work with
> my gnuplot files. I have been using texlive 2011, which works fine. With
> the "context" command from standalone, the following error occurs,
>
> ----- Error begins -----
> ! Undefined control sequence.
>
> system > tex > error on line 4 in file /Users/jin/pkgs/ConTeXt/tex/texmf-context/tex/context/base/cont-yes.mkiv: Undefined control sequence ...
>
> 1 %D \module
> 2 %D [ file=cont-yes,
> 3 %D version=2012.06.01,
> 4 >> %D title=\CONTEXT\ Miscellaneous Macros,
> 5 %D subtitle=Startup Stub,
> 6 %D author=Hans Hagen,
> 7 %D date=\currentdate,
> 8 %D copyright={PRAGMA ADE \& \CONTEXT\ Development Team}]
> 9 %C
> 10 %C This module is part of the \CONTEXT\ macro||package and is
> 11 %C therefore copyrighted by \PRAGMA. See mreadme.pdf for
> 12 %C details.
> 13
> 14 % At some point I will reconsider the \starttext .. \stoptext
>
>
> \startGNUPLOTpage ->\begingroup \obeyMPlines
> \dostartGNUPLOTpage
> l.4 \startGNUPLOTpage
> ----- Error ends -----
>
> I am not really sure which line is the error. Please excuse me if I pasted too much.
> The version of context from the standalone is
>
> ConTeXt ver: 2012.06.05 09:16 MKIV fmt: 2012.6.5 int: english/english
>
> As I have mentioned, the same file works fine with context in texlive 2011, which has
> version
>
> ConTeXt ver: 2011.05.18 18:04 MKIV fmt: 2012.4.5 int: english/english
>
> It looks like only two weeks difference.
If you do your calculations modulo 356 days, yes ;)
I need to wait for a huge macports update to finish (needs
recompilation of many big packages, including octave etc.) before I
will be able to use gnuplot again, but there is a fair chance that
either there is no gnuplot module installed in your standalone ConTeXt
installation (an extra --modules=gnuplot switch needed if I'm not
mistaken) or that something broke with yesterday's massive changes
(that 356 days joke wasn't meant seriously).
Please check if you have
/Users/jin/pkgs/ConTeXt/tex/texmf-modules/tex/context/third/gnuplot/t-gnuplot.tex
(kpsewhich t-gnuplot.tex)
on your system.
I'll take a look as soon as I have a working gnuplot binary back.
Mojca
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: gnuplot with ConTeXt standalone
2012-06-06 7:47 ` Mojca Miklavec
@ 2012-06-06 8:02 ` Mojca Miklavec
2012-06-06 9:30 ` Xiao-Yong Jin
0 siblings, 1 reply; 7+ messages in thread
From: Mojca Miklavec @ 2012-06-06 8:02 UTC (permalink / raw)
To: mailing list for ConTeXt users
On Wed, Jun 6, 2012 at 9:47 AM, Mojca Miklavec wrote:
>
> Please check if you have
> /Users/jin/pkgs/ConTeXt/tex/texmf-modules/tex/context/third/gnuplot/t-gnuplot.tex
> (kpsewhich t-gnuplot.tex)
> on your system.
Please ignore my previous remarks and please try to remove
\obeyMPlines
from t-gnuplot.tex instead to see if that solves the problem.
Mojca
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: gnuplot with ConTeXt standalone
2012-06-06 8:02 ` Mojca Miklavec
@ 2012-06-06 9:30 ` Xiao-Yong Jin
2012-06-06 23:05 ` Mojca Miklavec
0 siblings, 1 reply; 7+ messages in thread
From: Xiao-Yong Jin @ 2012-06-06 9:30 UTC (permalink / raw)
To: mailing list for ConTeXt users
On Jun 6, 2012, at 5:02 PM, Mojca Miklavec wrote:
> Please ignore my previous remarks and please try to remove
> \obeyMPlines
> from t-gnuplot.tex instead to see if that solves the problem.
That is exactly the culprit.
Thank you all. I understand how to read the error output, now.
And reminded myself that this is the year 2012.
Xiaoyong
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: gnuplot with ConTeXt standalone
2012-06-06 9:30 ` Xiao-Yong Jin
@ 2012-06-06 23:05 ` Mojca Miklavec
0 siblings, 0 replies; 7+ messages in thread
From: Mojca Miklavec @ 2012-06-06 23:05 UTC (permalink / raw)
To: mailing list for ConTeXt users
On Wed, Jun 6, 2012 at 11:30 AM, Xiao-Yong Jin wrote:
> On Jun 6, 2012, at 5:02 PM, Mojca Miklavec wrote:
>
>> Please ignore my previous remarks and please try to remove
>> \obeyMPlines
>> from t-gnuplot.tex instead to see if that solves the problem.
>
> That is exactly the culprit.
> Thank you all. I understand how to read the error output, now.
I didn't read careful enough. I thought that \startGNUPLOTpage was undefined.
Anyway, I updated the module in distribution & in TL (the latter will
be updated in a few hours).
Thanks again to both,
Mojca
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: gnuplot with ConTeXt standalone
2012-06-05 15:00 gnuplot with ConTeXt standalone Xiao-Yong Jin
2012-06-06 7:47 ` Mojca Miklavec
@ 2012-06-06 7:49 ` Hans Hagen
2012-06-06 7:59 ` Mojca Miklavec
1 sibling, 1 reply; 7+ messages in thread
From: Hans Hagen @ 2012-06-06 7:49 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 5-6-2012 17:00, Xiao-Yong Jin wrote:
> \startGNUPLOTpage ->\begingroup \obeyMPlines
there is no \obeyMPlines any longer so you probably mix up an new
context and an old gnuplot module
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2012-06-06 23:05 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-06-05 15:00 gnuplot with ConTeXt standalone Xiao-Yong Jin
2012-06-06 7:47 ` Mojca Miklavec
2012-06-06 8:02 ` Mojca Miklavec
2012-06-06 9:30 ` Xiao-Yong Jin
2012-06-06 23:05 ` Mojca Miklavec
2012-06-06 7:49 ` Hans Hagen
2012-06-06 7:59 ` Mojca Miklavec
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).