* Lower limit of integrals shifted @ 2019-01-10 6:56 Mikael P. Sundqvist 2019-01-11 10:36 ` Hans Hagen 0 siblings, 1 reply; 10+ messages in thread From: Mikael P. Sundqvist @ 2019-01-10 6:56 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1: Type: text/plain, Size: 279 bytes --] Hi, the output of \setupmathematics[ integral=nolimits, ] \starttext \startTEXpage[offset=2bp] $\displaystyle\int_0^1x^2\,dx=\frac{1}{3}$ \stopTEXpage \stoptext is attached. Clearly, the lower limit in the integral is not correctly placed. With hope of a quick fix, Mikael [-- Attachment #2: integralproblem.png --] [-- Type: image/png, Size: 9472 bytes --] [-- Attachment #3: Type: text/plain, Size: 492 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Lower limit of integrals shifted 2019-01-10 6:56 Lower limit of integrals shifted Mikael P. Sundqvist @ 2019-01-11 10:36 ` Hans Hagen 2019-01-11 13:43 ` Mikael P. Sundqvist 0 siblings, 1 reply; 10+ messages in thread From: Hans Hagen @ 2019-01-11 10:36 UTC (permalink / raw) To: mailing list for ConTeXt users, Mikael P. Sundqvist On 1/10/2019 7:56 AM, Mikael P. Sundqvist wrote: > Hi, > > the output of > > \setupmathematics[ > integral=nolimits, > ] > > \starttext > \startTEXpage[offset=2bp] > $\displaystyle\int_0^1x^2\,dx=\frac{1}{3}$ > \stopTEXpage > \stoptext > > is attached. Clearly, the lower limit in the integral is not correctly placed. > > With hope of a quick fix, The problem is in the fonts ... some have proper math kerns, some don't, some have italic, some don't, so one solution for all is impossible one way to deal with this is setting options (but these can be different per font and i'm not sure yet how to support that) you can try if \mathnolimitsmode=3 works ok for you will work ok for you \startTEXpage[offset=2bp] $\mathnolimitsmode0 \displaystyle\int_0^1 x^2\,dx=\frac{1}{3}$\par $\mathnolimitsmode1 \displaystyle\int_0^1 x^2\,dx=\frac{1}{3}$\par $\mathnolimitsmode2 \displaystyle\int_0^1 x^2\,dx=\frac{1}{3}$\par $\mathnolimitsmode3 \displaystyle\int_0^1 x^2\,dx=\frac{1}{3}$\par $\mathnolimitsmode4 \displaystyle\int_0^1 x^2\,dx=\frac{1}{3}$\par $\mathnolimitsmode2000 \displaystyle\int_0^1 x^2\,dx=\frac{1}{3}$\par \stopTEXpage ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Lower limit of integrals shifted 2019-01-11 10:36 ` Hans Hagen @ 2019-01-11 13:43 ` Mikael P. Sundqvist 2019-01-11 13:49 ` Hans Hagen 0 siblings, 1 reply; 10+ messages in thread From: Mikael P. Sundqvist @ 2019-01-11 13:43 UTC (permalink / raw) To: Hans Hagen; +Cc: mailing list for ConTeXt users On Fri, Jan 11, 2019 at 11:36 AM Hans Hagen <j.hagen@xs4all.nl> wrote: > > On 1/10/2019 7:56 AM, Mikael P. Sundqvist wrote: > > Hi, > > > > the output of > > > > \setupmathematics[ > > integral=nolimits, > > ] > > > > \starttext > > \startTEXpage[offset=2bp] > > $\displaystyle\int_0^1x^2\,dx=\frac{1}{3}$ > > \stopTEXpage > > \stoptext > > > > is attached. Clearly, the lower limit in the integral is not correctly placed. > > > > With hope of a quick fix, > The problem is in the fonts ... some have proper math kerns, some don't, > some have italic, some don't, so one solution for all is impossible > > one way to deal with this is setting options (but these can be different > per font and i'm not sure yet how to support that) > > you can try if \mathnolimitsmode=3 works ok for you > > will work ok for you > > \startTEXpage[offset=2bp] > $\mathnolimitsmode0 \displaystyle\int_0^1 x^2\,dx=\frac{1}{3}$\par > $\mathnolimitsmode1 \displaystyle\int_0^1 x^2\,dx=\frac{1}{3}$\par > $\mathnolimitsmode2 \displaystyle\int_0^1 x^2\,dx=\frac{1}{3}$\par > $\mathnolimitsmode3 \displaystyle\int_0^1 x^2\,dx=\frac{1}{3}$\par > $\mathnolimitsmode4 \displaystyle\int_0^1 x^2\,dx=\frac{1}{3}$\par > $\mathnolimitsmode2000 \displaystyle\int_0^1 x^2\,dx=\frac{1}{3}$\par > \stopTEXpage > > > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl > ----------------------------------------------------------------- Oh, that sounds bad if it is in the fonts (I don't understand, it seemed to work fine with lmodern, stixtwo, lucidaot, ... just before, has something changed recently?) Two related questions: 1) This \mathnolimitsmode does not seem to have any effect in a \startformula \stopformula. 2) Could one set this globally (both inline and displayed formulas) in a document? /Mikael ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Lower limit of integrals shifted 2019-01-11 13:43 ` Mikael P. Sundqvist @ 2019-01-11 13:49 ` Hans Hagen 2019-09-12 16:55 ` special book layout problem in ConTeXt Nicolas Mondon 0 siblings, 1 reply; 10+ messages in thread From: Hans Hagen @ 2019-01-11 13:49 UTC (permalink / raw) To: Mikael P. Sundqvist; +Cc: mailing list for ConTeXt users On 1/11/2019 2:43 PM, Mikael P. Sundqvist wrote: > Oh, that sounds bad if it is in the fonts (I don't understand, it > seemed to work fine with lmodern, stixtwo, lucidaot, ... just before, > has something changed recently?) well, then always enable mode 3 ... the default to mode 0 is because fonts can have kerns to deal with this but anyone can choose his/her preference ... as said, i'm nto sure hot to deal with it in context (as i might as well decide to add proper kerns to these fonts at runtime) > Two related questions: > > 1) This \mathnolimitsmode does not seem to have any effect in a > \startformula \stopformula. > 2) Could one set this globally (both inline and displayed formulas) in > a document? you can try something \appendtoks ... \to \everymathematics (i might cook up some more granularity in the future - i have some ideas about it - but that will then be experimental for a while) Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 10+ messages in thread
* special book layout problem in ConTeXt 2019-01-11 13:49 ` Hans Hagen @ 2019-09-12 16:55 ` Nicolas Mondon 2019-09-15 11:52 ` Wolfgang Schuster 0 siblings, 1 reply; 10+ messages in thread From: Nicolas Mondon @ 2019-09-12 16:55 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 872 bytes --] Dear ConText Hepers, I'm not sure I'm writing at the good email adress, or even the good place; but sorry, I didn't find any online forum or othr hep centers, so I try. Please tell me if I have to write to someone else. I'd like to edit a thesis (so, as a book), with the text only on even pages, and tables and figure only on odd pages, in front of the paragraph wich comment them. I try to do this automatically by writing the text, make a reference to the figure in the paragraph, and then the layout appears correctly... I have the impression this is possible to do in ConText, but I havn't find how yet. Is it possibel to force, in the setups, the text to be on the right pages, and the figures on the left pages? Thank you very much in advance All the best Nicolas Mondon -- /Nicolas Mondon catalogue, écoutes, concerts : http://n.mondon.free.fr/ / [-- Attachment #1.2: Type: text/html, Size: 1342 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: special book layout problem in ConTeXt 2019-09-12 16:55 ` special book layout problem in ConTeXt Nicolas Mondon @ 2019-09-15 11:52 ` Wolfgang Schuster 2019-09-15 12:55 ` Henning Hraban Ramm 2019-09-19 17:18 ` Nicolas Mondon 0 siblings, 2 replies; 10+ messages in thread From: Wolfgang Schuster @ 2019-09-15 11:52 UTC (permalink / raw) To: mailing list for ConTeXt users, Nicolas Mondon Nicolas Mondon schrieb am 12.09.2019 um 18:55: > > Dear ConText Hepers, > > I'm not sure I'm writing at the good email adress, or even the good > place; but sorry, I didn't find any online forum or othr hep centers, > so I try. Please tell me if I have to write to someone else. > This is the right place for your questions. > > I'd like to edit a thesis (so, as a book), with the text only on even > pages, and tables and figure only on odd pages, in front of the > paragraph wich comment them. I try to do this automatically by writing > the text, make a reference to the figure in the paragraph, and then > the layout appears correctly... > If the figures/tables should appear before the text you want on a even (left side) page while the text would appear only on odd (right side) pages. A few questions remain before a certain answer can be given, e.g. should the left page be empty when there are no figures/tables for the following right page and should the float appear at the same vertical position as the reference. > > I have the impression this is possible to do in ConText, but I havn't > find how yet. Is it possibel to force, in the setups, the text to be > on the right pages, and the figures on the left pages? > There is no easy solution for this yet and it also depends on your requirements mentioned above. The easiest way to achieve such a layout is to to increase the paper width to twice the normal layout and use the left half for a very big margin area where you can place the tables/graphics. In a first step you create a normal document with this unusual layout. Afterwards you split each page in half and create two separate pages from one single page which can be done with a loop (can be done theoretically with the imposition mechanism but a separate document is easier). Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: special book layout problem in ConTeXt 2019-09-15 11:52 ` Wolfgang Schuster @ 2019-09-15 12:55 ` Henning Hraban Ramm 2019-09-19 17:18 ` Nicolas Mondon 1 sibling, 0 replies; 10+ messages in thread From: Henning Hraban Ramm @ 2019-09-15 12:55 UTC (permalink / raw) To: mailing list for ConTeXt users > Am 2019-09-15 um 13:52 schrieb Wolfgang Schuster <wolfgang.schuster.lists@gmail.com>: > > Nicolas Mondon schrieb am 12.09.2019 um 18:55: >> >> Dear ConText Hepers, >> >> I'm not sure I'm writing at the good email adress, or even the good place; but sorry, I didn't find any online forum or othr hep centers, so I try. Please tell me if I have to write to someone else. >> > This is the right place for your questions. >> >> I'd like to edit a thesis (so, as a book), with the text only on even pages, and tables and figure only on odd pages, in front of the paragraph wich comment them. I try to do this automatically by writing the text, make a reference to the figure in the paragraph, and then the layout appears correctly... >> > If the figures/tables should appear before the text you want on a even (left side) page while the text would appear only on odd (right side) pages. A few questions remain before a certain answer can be given, e.g. should the left page be empty when there are no figures/tables for the following right page and should the float appear at the same vertical position as the reference. >> >> I have the impression this is possible to do in ConText, but I havn't find how yet. Is it possibel to force, in the setups, the text to be on the right pages, and the figures on the left pages? >> > There is no easy solution for this yet and it also depends on your requirements mentioned above. The easiest way to achieve such a layout is to to increase the paper width to twice the normal layout and use the left half for a very big margin area where you can place the tables/graphics. > > In a first step you create a normal document with this unusual layout. Afterwards you split each page in half and create two separate pages from one single page which can be done with a loop (can be done theoretically with the imposition mechanism but a separate document is easier). Wouldn’t it make sense to use streams (https://wiki.contextgarden.net/Columns#Streams)? Greetlings, Hraban --- https://www.fiee.net http://wiki.contextgarden.net https://www.dreiviertelhaus.de GPG Key ID 1C9B22FD ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: special book layout problem in ConTeXt 2019-09-15 11:52 ` Wolfgang Schuster 2019-09-15 12:55 ` Henning Hraban Ramm @ 2019-09-19 17:18 ` Nicolas Mondon 2019-09-19 17:49 ` Wolfgang Schuster 1 sibling, 1 reply; 10+ messages in thread From: Nicolas Mondon @ 2019-09-19 17:18 UTC (permalink / raw) To: Wolfgang Schuster, mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 3205 bytes --] Thank you Wolfgang for your answer. So, yes the figures/tables should appear before the text on a even (left side) page while the text would appear only on odd (right side) pages. The left page should be empty when there are no figures/tables for the following right page, and the float doesn't have to appear strictly at the same vertical position as the reference, but as possible only. Specially beacause, it may have several references in only one paragraph for exemple on the right page, and so the figure should appear in the right order on the left page, but couldn't be exactly at the same height. Also, if there are too many references in on right page, the figures which can't fit the left page should go on the top od the next left page... It's possible that my answer change the proposition you made at the end of your message. Nevertherless, there is some thing in your last paragrph which is not clear for me : " Afterwards you split each page in half and create two separate pages from one single page which can be done with a loop (can be done theoretically with the imposition mechanism but a separate document is easier)." Thank you! Nicolas /Nicolas Mondon catalogue, écoutes, concerts : http://n.mondon.free.fr/ / Le 15/09/2019 à 13:52, Wolfgang Schuster a écrit : > Nicolas Mondon schrieb am 12.09.2019 um 18:55: >> >> Dear ConText Hepers, >> >> I'm not sure I'm writing at the good email adress, or even the good >> place; but sorry, I didn't find any online forum or othr hep centers, >> so I try. Please tell me if I have to write to someone else. >> > This is the right place for your questions. >> >> I'd like to edit a thesis (so, as a book), with the text only on even >> pages, and tables and figure only on odd pages, in front of the >> paragraph wich comment them. I try to do this automatically by >> writing the text, make a reference to the figure in the paragraph, >> and then the layout appears correctly... >> > If the figures/tables should appear before the text you want on a even > (left side) page while the text would appear only on odd (right side) > pages. A few questions remain before a certain answer can be given, > e.g. should the left page be empty when there are no figures/tables > for the following right page and should the float appear at the same > vertical position as the reference. >> >> I have the impression this is possible to do in ConText, but I havn't >> find how yet. Is it possibel to force, in the setups, the text to be >> on the right pages, and the figures on the left pages? >> > There is no easy solution for this yet and it also depends on your > requirements mentioned above. The easiest way to achieve such a layout > is to to increase the paper width to twice the normal layout and use > the left half for a very big margin area where you can place the > tables/graphics. > > In a first step you create a normal document with this unusual layout. > Afterwards you split each page in half and create two separate pages > from one single page which can be done with a loop (can be done > theoretically with the imposition mechanism but a separate document is > easier). > > Wolfgang > [-- Attachment #1.2: Type: text/html, Size: 4357 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: special book layout problem in ConTeXt 2019-09-19 17:18 ` Nicolas Mondon @ 2019-09-19 17:49 ` Wolfgang Schuster 2019-09-19 18:17 ` nicolas mondon 0 siblings, 1 reply; 10+ messages in thread From: Wolfgang Schuster @ 2019-09-19 17:49 UTC (permalink / raw) To: Nicolas Mondon; +Cc: mailing list for ConTeXt users Nicolas Mondon schrieb am 19.09.2019 um 19:18: > > Thank you Wolfgang for your answer. > > So, yes the figures/tables should appear before the text on a even > (left side) page while the text would appear only on odd (right side) > pages. The left page should be empty when there are no figures/tables > for the following right page, and the float doesn't have to appear > strictly at the same vertical position as the reference, but as > possible only. Specially beacause, it may have several references in > only one paragraph for exemple on the right page, and so the figure > should appear in the right order on the left page, but couldn't be > exactly at the same height. Also, if there are too many references in > on right page, the figures which can't fit the left page should go on > the top od the next left page... > > It's possible that my answer change the proposition you made at the > end of your message. Nevertherless, there is some thing in your last > paragrph which is not clear for me : " Afterwards you split each page > in half and create two separate pages from one single page which can > be done with a loop (can be done theoretically with the imposition > mechanism but a separate document is easier)." > Step 1: Create a document with a very big left margin where you can place all floats. \setuppapersize [A3,landscape] \setuplayout [backspace=23.5cm, width=15cm,edge=14cm] \showframe \setupfloat [default=leftedge, minwidth=14cm] \starttext \input ward \startplacefigure \externalfigure[dummy] \stopplacefigure \input knuth \startplacetable \starttabulate[|c|c|c|] \FL \NC A \NC B \NC C \NC\NR \ML \NC X \NC Y \NC Z \NC\NR \LL \stoptabulate \stopplacetable \input zapf \stoptext Step 2: Split each page into two separate pages where one contains all floats while the other page contains the text. Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: special book layout problem in ConTeXt 2019-09-19 17:49 ` Wolfgang Schuster @ 2019-09-19 18:17 ` nicolas mondon 0 siblings, 0 replies; 10+ messages in thread From: nicolas mondon @ 2019-09-19 18:17 UTC (permalink / raw) To: Wolfgang Schuster; +Cc: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 2341 bytes --] Woaw! Thanks a lot... Let's try! Le jeu. 19 sept. 2019 à 19:49, Wolfgang Schuster < wolfgang.schuster.lists@gmail.com> a écrit : > Nicolas Mondon schrieb am 19.09.2019 um 19:18: > > > > Thank you Wolfgang for your answer. > > > > So, yes the figures/tables should appear before the text on a even > > (left side) page while the text would appear only on odd (right side) > > pages. The left page should be empty when there are no figures/tables > > for the following right page, and the float doesn't have to appear > > strictly at the same vertical position as the reference, but as > > possible only. Specially beacause, it may have several references in > > only one paragraph for exemple on the right page, and so the figure > > should appear in the right order on the left page, but couldn't be > > exactly at the same height. Also, if there are too many references in > > on right page, the figures which can't fit the left page should go on > > the top od the next left page... > > > > It's possible that my answer change the proposition you made at the > > end of your message. Nevertherless, there is some thing in your last > > paragrph which is not clear for me : " Afterwards you split each page > > in half and create two separate pages from one single page which can > > be done with a loop (can be done theoretically with the imposition > > mechanism but a separate document is easier)." > > > Step 1: > > Create a document with a very big left margin where you can place all > floats. > > \setuppapersize > [A3,landscape] > > \setuplayout > [backspace=23.5cm, > width=15cm,edge=14cm] > > \showframe > > \setupfloat > [default=leftedge, > minwidth=14cm] > > \starttext > > \input ward > > \startplacefigure > \externalfigure[dummy] > \stopplacefigure > > \input knuth > > \startplacetable > \starttabulate[|c|c|c|] > \FL > \NC A \NC B \NC C \NC\NR > \ML > \NC X \NC Y \NC Z \NC\NR > \LL > \stoptabulate > \stopplacetable > > \input zapf > > \stoptext > > > Step 2: > > Split each page into two separate pages where one contains all floats > while the other page contains the text. > > Wolfgang > > -- *catalogue, écoutes et infos concerts :* *http://n.mondon.free.fr/* <http://n.mondon.free.fr/> [-- Attachment #1.2: Type: text/html, Size: 3272 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2019-09-19 18:17 UTC | newest] Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2019-01-10 6:56 Lower limit of integrals shifted Mikael P. Sundqvist 2019-01-11 10:36 ` Hans Hagen 2019-01-11 13:43 ` Mikael P. Sundqvist 2019-01-11 13:49 ` Hans Hagen 2019-09-12 16:55 ` special book layout problem in ConTeXt Nicolas Mondon 2019-09-15 11:52 ` Wolfgang Schuster 2019-09-15 12:55 ` Henning Hraban Ramm 2019-09-19 17:18 ` Nicolas Mondon 2019-09-19 17:49 ` Wolfgang Schuster 2019-09-19 18:17 ` nicolas mondon
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).