* \mainlanguage[pe]
@ 2016-07-06 18:02 Mohammad Hossein Bateni
2016-07-06 18:30 ` \mainlanguage[pe] Wolfgang Schuster
2016-07-07 5:20 ` \mainlanguage[pe] Mojca Miklavec
0 siblings, 2 replies; 11+ messages in thread
From: Mohammad Hossein Bateni @ 2016-07-06 18:02 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 1485 bytes --]
Hello,
This was lost in the other thread, so I'm starting a fresh one dedicated to
the question.
1) \showinstalledlanguages does not show pe/persian/fa or anything like
that but it has several arabic variants. was this dropped in MkIV or was
there never a persian language environment even in MkII? I thought there
were translated labels for Farsi somewhere.
2) In the following MWE, ad-hoc hyphenation using \- works and leads to
hyphenation. However, specifying the pattern at the beginning does not
have any effect. Am I missing something?
\usemodule[simplefonts]
\setmainfont[dejavusans][features=arabic,range=arabic]
\setupalign[r2l]
\showframe
\hyphenation{سازمان-دهی}
\starttext
%% The above pattern is not used here and the long word moves into the
margin.
\dorecurse{14}{سلام }
سازماندهی
مناسب.
%% It does work here, though.
\dorecurse{14}{سلام }
سازمان\-دهی
مناسب.
\stoptext
How can one create a new language? The languages manual
<http://www.pragma-ade.nl/general/manuals/languages-mkiv.pdf> suggests that
this is possible. Does that mean I need to send the request to
Hans/Wolfgang to create the new entry or can one do so dynamically? Beside
the issue of sorting in indices, etc.—which I will get to in due
time—having an entry for language pe/persian seems to be necessary to
*properly* use \setuplabeltext, etc. Is that correct?
Thanks a lot!
—MHB
[-- Attachment #1.2: Type: text/html, Size: 2149 bytes --]
[-- Attachment #2: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: \mainlanguage[pe] 2016-07-06 18:02 \mainlanguage[pe] Mohammad Hossein Bateni @ 2016-07-06 18:30 ` Wolfgang Schuster 2016-07-07 8:53 ` \mainlanguage[pe] Mohammad Hossein Bateni 2016-07-07 5:20 ` \mainlanguage[pe] Mojca Miklavec 1 sibling, 1 reply; 11+ messages in thread From: Wolfgang Schuster @ 2016-07-06 18:30 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 2666 bytes --] > Mohammad Hossein Bateni <mailto:bateni@gmail.com> > 6. Juli 2016 um 20:02 > Hello, > > This was lost in the other thread, so I'm starting a fresh one > dedicated to the question. > > 1) \showinstalledlanguages does not show pe/persian/fa or anything > like that but it has several arabic variants. was this dropped in > MkIV or was there never a persian language environment even in MkII? > I thought there were translated labels for Farsi somewhere. > 2) In the following MWE, ad-hoc hyphenation using \- works and leads > to hyphenation. However, specifying the pattern at the beginning does > not have any effect. Am I missing something? > > > \usemodule[simplefonts] > \setmainfont[dejavusans][features=arabic,range=arabic] > \setupalign[r2l] > \showframe > \hyphenation{سازمان-دهی} > > \starttext > > %% The above pattern is not used here and the long word moves into the > margin. > \dorecurse{14}{سلام } > سازماندهی > مناسب. > > %% It does work here, though. > \dorecurse{14}{سلام } > سازمان\-دهی > مناسب. > > \stoptext > > > How can one create a new language? The languages manual > <http://www.pragma-ade.nl/general/manuals/languages-mkiv.pdf> suggests > that this is possible. Does that mean I need to send the request to > Hans/Wolfgang to create the new entry or can one do so dynamically? > Beside the issue of sorting in indices, etc.—which I will get to in > due time—having an entry for language pe/persian seems to be necessary > to /properly/ use \setuplabeltext, etc. Is that correct? You can create a new language (and synonyms for it) with the \installlanguage command, below is a slightly modified version of the arabic entry. You can change the values for leftquotation etc. and send the result to Hans. % this goes into mult-sys.mkiv \definesystemconstant {persian} \definesystemconstant {fa} % this goes into lang-def.mkiv \installlanguage [\s!fa] [\c!spacing=\v!broad, \c!leftsentence=\emdash, \c!rightsentence=\emdash, \c!leftsubsentence=\emdash, \c!rightsubsentence=\emdash, \c!leftquote=\upperleftsinglesixquote, \c!rightquote=\upperrightsingleninequote, \c!leftquotation=\upperleftdoublesixquote, \c!rightquotation=\upperrightdoubleninequote, \c!date={\v!day,\space,\v!month,\space,\v!year}] \installlanguage [\s!persian] [\s!fa] \installlanguage[\s!fa-ir][\c!default=\s!fa] The default labels for the languages are stored in lang-txt.lua, you can add entries for persian and send the modified file to Hans. Wolfgang [-- Attachment #1.2: Type: text/html, Size: 4268 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: \mainlanguage[pe] 2016-07-06 18:30 ` \mainlanguage[pe] Wolfgang Schuster @ 2016-07-07 8:53 ` Mohammad Hossein Bateni 2016-07-07 12:40 ` \mainlanguage[pe] Mohammad Hossein Bateni 2016-07-07 14:02 ` \mainlanguage[pe] Wolfgang Schuster 0 siblings, 2 replies; 11+ messages in thread From: Mohammad Hossein Bateni @ 2016-07-07 8:53 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 3563 bytes --] Wolfgang & Hans, In customizing the date, is there a way to use a number converter on day and year? In particular, I'd like to apply persiandecimals conversion on them. (I have a similar question regarding \currentime.) Thanks! —Hossein On Wed, Jul 6, 2016 at 2:30 PM, Wolfgang Schuster < schuster.wolfgang@gmail.com> wrote: > Mohammad Hossein Bateni <bateni@gmail.com> > 6. Juli 2016 um 20:02 > Hello, > > This was lost in the other thread, so I'm starting a fresh one dedicated > to the question. > > 1) \showinstalledlanguages does not show pe/persian/fa or anything like > that but it has several arabic variants. was this dropped in MkIV or was > there never a persian language environment even in MkII? I thought there > were translated labels for Farsi somewhere. > 2) In the following MWE, ad-hoc hyphenation using \- works and leads to > hyphenation. However, specifying the pattern at the beginning does not > have any effect. Am I missing something? > > > \usemodule[simplefonts] > \setmainfont[dejavusans][features=arabic,range=arabic] > \setupalign[r2l] > \showframe > \hyphenation{سازمان-دهی} > > \starttext > > %% The above pattern is not used here and the long word moves into the > margin. > \dorecurse{14}{سلام } > سازماندهی > مناسب. > > %% It does work here, though. > \dorecurse{14}{سلام } > سازمان\-دهی > مناسب. > > \stoptext > > > How can one create a new language? The languages manual > <http://www.pragma-ade.nl/general/manuals/languages-mkiv.pdf> suggests > that this is possible. Does that mean I need to send the request to > Hans/Wolfgang to create the new entry or can one do so dynamically? Beside > the issue of sorting in indices, etc.—which I will get to in due > time—having an entry for language pe/persian seems to be necessary to > *properly* use \setuplabeltext, etc. Is that correct? > > You can create a new language (and synonyms for it) with the > \installlanguage command, below is a slightly modified version of the > arabic entry. You can change the values for leftquotation etc. and send the > result to Hans. > > % this goes into mult-sys.mkiv > > \definesystemconstant {persian} \definesystemconstant {fa} > > % this goes into lang-def.mkiv > > \installlanguage > [\s!fa] > [\c!spacing=\v!broad, > \c!leftsentence=\emdash, > \c!rightsentence=\emdash, > \c!leftsubsentence=\emdash, > \c!rightsubsentence=\emdash, > \c!leftquote=\upperleftsinglesixquote, > \c!rightquote=\upperrightsingleninequote, > \c!leftquotation=\upperleftdoublesixquote, > \c!rightquotation=\upperrightdoubleninequote, > \c!date={\v!day,\space,\v!month,\space,\v!year}] > > \installlanguage [\s!persian] [\s!fa] > > \installlanguage[\s!fa-ir][\c!default=\s!fa] > > > The default labels for the languages are stored in lang-txt.lua, you can > add entries for persian and send the modified file to Hans. > > Wolfgang > > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > > ___________________________________________________________________________________ > [-- Attachment #1.2: Type: text/html, Size: 5711 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: \mainlanguage[pe] 2016-07-07 8:53 ` \mainlanguage[pe] Mohammad Hossein Bateni @ 2016-07-07 12:40 ` Mohammad Hossein Bateni 2016-07-07 21:28 ` \mainlanguage[pe] Hans Hagen 2016-07-07 14:02 ` \mainlanguage[pe] Wolfgang Schuster 1 sibling, 1 reply; 11+ messages in thread From: Mohammad Hossein Bateni @ 2016-07-07 12:40 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 4057 bytes --] While you're at it, could you also add something like jday, jmonth, jmm, jyear, etc. to use the Jalali calendar instead of the Gregorian? I see that the—commented—conversion code exists in core-con.lua. I am willing to provide test cases for the conversion. Thanks! —MHB On Thu, Jul 7, 2016 at 4:53 AM, Mohammad Hossein Bateni <bateni@gmail.com> wrote: > Wolfgang & Hans, > > In customizing the date, is there a way to use a number converter on day > and year? In particular, I'd like to apply persiandecimals conversion on > them. (I have a similar question regarding \currentime.) > > Thanks! > —Hossein > > On Wed, Jul 6, 2016 at 2:30 PM, Wolfgang Schuster < > schuster.wolfgang@gmail.com> wrote: > >> Mohammad Hossein Bateni <bateni@gmail.com> >> 6. Juli 2016 um 20:02 >> Hello, >> >> This was lost in the other thread, so I'm starting a fresh one dedicated >> to the question. >> >> 1) \showinstalledlanguages does not show pe/persian/fa or anything like >> that but it has several arabic variants. was this dropped in MkIV or was >> there never a persian language environment even in MkII? I thought there >> were translated labels for Farsi somewhere. >> 2) In the following MWE, ad-hoc hyphenation using \- works and leads to >> hyphenation. However, specifying the pattern at the beginning does not >> have any effect. Am I missing something? >> >> >> \usemodule[simplefonts] >> \setmainfont[dejavusans][features=arabic,range=arabic] >> \setupalign[r2l] >> \showframe >> \hyphenation{سازمان-دهی} >> >> \starttext >> >> %% The above pattern is not used here and the long word moves into the >> margin. >> \dorecurse{14}{سلام } >> سازماندهی >> مناسب. >> >> %% It does work here, though. >> \dorecurse{14}{سلام } >> سازمان\-دهی >> مناسب. >> >> \stoptext >> >> >> How can one create a new language? The languages manual >> <http://www.pragma-ade.nl/general/manuals/languages-mkiv.pdf> suggests >> that this is possible. Does that mean I need to send the request to >> Hans/Wolfgang to create the new entry or can one do so dynamically? Beside >> the issue of sorting in indices, etc.—which I will get to in due >> time—having an entry for language pe/persian seems to be necessary to >> *properly* use \setuplabeltext, etc. Is that correct? >> >> You can create a new language (and synonyms for it) with the >> \installlanguage command, below is a slightly modified version of the >> arabic entry. You can change the values for leftquotation etc. and send the >> result to Hans. >> >> % this goes into mult-sys.mkiv >> >> \definesystemconstant {persian} \definesystemconstant {fa} >> >> % this goes into lang-def.mkiv >> >> \installlanguage >> [\s!fa] >> [\c!spacing=\v!broad, >> \c!leftsentence=\emdash, >> \c!rightsentence=\emdash, >> \c!leftsubsentence=\emdash, >> \c!rightsubsentence=\emdash, >> \c!leftquote=\upperleftsinglesixquote, >> \c!rightquote=\upperrightsingleninequote, >> \c!leftquotation=\upperleftdoublesixquote, >> \c!rightquotation=\upperrightdoubleninequote, >> \c!date={\v!day,\space,\v!month,\space,\v!year}] >> >> \installlanguage [\s!persian] [\s!fa] >> >> \installlanguage[\s!fa-ir][\c!default=\s!fa] >> >> >> The default labels for the languages are stored in lang-txt.lua, you can >> add entries for persian and send the modified file to Hans. >> >> Wolfgang >> >> >> ___________________________________________________________________________________ >> If your question is of interest to others as well, please add an entry to >> the Wiki! >> >> maillist : ntg-context@ntg.nl / >> http://www.ntg.nl/mailman/listinfo/ntg-context >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >> archive : http://foundry.supelec.fr/projects/contextrev/ >> wiki : http://contextgarden.net >> >> ___________________________________________________________________________________ >> > > [-- Attachment #1.2: Type: text/html, Size: 6533 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: \mainlanguage[pe] 2016-07-07 12:40 ` \mainlanguage[pe] Mohammad Hossein Bateni @ 2016-07-07 21:28 ` Hans Hagen 2016-07-08 9:40 ` \mainlanguage[pe] Meer, Hans van der 0 siblings, 1 reply; 11+ messages in thread From: Hans Hagen @ 2016-07-07 21:28 UTC (permalink / raw) To: mailing list for ConTeXt users On 7/7/2016 2:40 PM, Mohammad Hossein Bateni wrote: > While you're at it, could you also add something like jday, jmonth, jmm, > jyear, etc. to use the Jalali calendar instead of the Gregorian? I see > that the—commented—conversion code exists in core-con.lua. I am willing > to provide test cases for the conversion. sure. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: \mainlanguage[pe] 2016-07-07 21:28 ` \mainlanguage[pe] Hans Hagen @ 2016-07-08 9:40 ` Meer, Hans van der 0 siblings, 0 replies; 11+ messages in thread From: Meer, Hans van der @ 2016-07-08 9:40 UTC (permalink / raw) To: NTG ConTeXt When naming these macros I would recommend to not use abbreviations like \jday, \jdate but rather using more explicite names like for example \jalaliday. Otherwise confusion with \jdate as a date in the Julian calendar easily could result. Hans van der Meer > On 07 Jul 2016, at 23:28, Hans Hagen <pragma@wxs.nl> wrote: > > On 7/7/2016 2:40 PM, Mohammad Hossein Bateni wrote: >> While you're at it, could you also add something like jday, jmonth, jmm, >> jyear, etc. to use the Jalali calendar instead of the Gregorian? I see >> that the—commented—conversion code exists in core-con.lua. I am willing >> to provide test cases for the conversion. > > sure. > > Hans > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl > ----------------------------------------------------------------- > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: \mainlanguage[pe] 2016-07-07 8:53 ` \mainlanguage[pe] Mohammad Hossein Bateni 2016-07-07 12:40 ` \mainlanguage[pe] Mohammad Hossein Bateni @ 2016-07-07 14:02 ` Wolfgang Schuster 2016-07-07 14:31 ` \mainlanguage[pe] Mohammad Hossein Bateni 1 sibling, 1 reply; 11+ messages in thread From: Wolfgang Schuster @ 2016-07-07 14:02 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 850 bytes --] > Mohammad Hossein Bateni <mailto:bateni@gmail.com> > 7. Juli 2016 um 10:53 > Wolfgang & Hans, > > In customizing the date, is there a way to use a number converter on > day and year? In particular, I'd like to apply persiandecimals > conversion on them. You can only change the numbers for the day (see below, I used greek to demonstrate it) but it could be done better (e.g. \currentdate[persian->day,space,month,persian->month] with "->" as separator for the conversion and keyword). %% begin example \installlanguage[fa][state=start] \defineconversion[fa][day][α,β,γ,δ,ε,ζ,η,θ,ι,κ,λ,μ] \setupbodyfont[pagella] \starttext \currentdate[day] \language[fa] \currentdate[day] \stoptext %% end example > (I have a similar question regarding \currentime.) Not possible at the moment. Wolfgang [-- Attachment #1.2: Type: text/html, Size: 2305 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: \mainlanguage[pe] 2016-07-07 14:02 ` \mainlanguage[pe] Wolfgang Schuster @ 2016-07-07 14:31 ` Mohammad Hossein Bateni 2016-07-07 17:32 ` \mainlanguage[pe] Wolfgang Schuster 0 siblings, 1 reply; 11+ messages in thread From: Mohammad Hossein Bateni @ 2016-07-07 14:31 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1664 bytes --] Thanks, Wolfgang! BTW why doesn't the following work? it gives the 'missing number' error. % \mainlanguage[en] \romannumerals{\currentdate[day]} On Thu, Jul 7, 2016 at 10:02 AM, Wolfgang Schuster < schuster.wolfgang@gmail.com> wrote: > Mohammad Hossein Bateni <bateni@gmail.com> > 7. Juli 2016 um 10:53 > Wolfgang & Hans, > > In customizing the date, is there a way to use a number converter on day > and year? In particular, I'd like to apply persiandecimals conversion on > them. > > You can only change the numbers for the day (see below, I used greek to > demonstrate it) but it could be done better (e.g. > \currentdate[persian->day,space,month,persian->month] with "->" as > separator for the conversion and keyword). > > %% begin example > \installlanguage[fa][state=start] > > \defineconversion[fa][day][α,β,γ,δ,ε,ζ,η,θ,ι,κ,λ,μ] > > \setupbodyfont[pagella] > > \starttext > > \currentdate[day] > > \language[fa] > > \currentdate[day] > > \stoptext > %% end example > > (I have a similar question regarding \currentime.) > > Not possible at the moment. > > Wolfgang > > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > > ___________________________________________________________________________________ > [-- Attachment #1.2: Type: text/html, Size: 3597 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: \mainlanguage[pe] 2016-07-07 14:31 ` \mainlanguage[pe] Mohammad Hossein Bateni @ 2016-07-07 17:32 ` Wolfgang Schuster 2016-08-01 16:31 ` \mainlanguage[pe] Mohammad Hossein Bateni 0 siblings, 1 reply; 11+ messages in thread From: Wolfgang Schuster @ 2016-07-07 17:32 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 503 bytes --] > Mohammad Hossein Bateni <mailto:bateni@gmail.com> > 7. Juli 2016 um 16:31 > Thanks, Wolfgang! > > BTW why doesn't the following work? it gives the 'missing number' error. > > % \mainlanguage[en] > \romannumerals{\currentdate[day]} > 1. The \currentdate command isn’t expandable and is therefore not expanded when you use it as argument for another command. 2. The \romannumerals commands expects a number as argument but \currentdate returns more than a simple number. Wolfgang [-- Attachment #1.2: Type: text/html, Size: 1583 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: \mainlanguage[pe] 2016-07-07 17:32 ` \mainlanguage[pe] Wolfgang Schuster @ 2016-08-01 16:31 ` Mohammad Hossein Bateni 0 siblings, 0 replies; 11+ messages in thread From: Mohammad Hossein Bateni @ 2016-08-01 16:31 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1781 bytes --] Is there a trick to get over this issue? Until a conversion mechanism like what you suggested (\currentdate[persian->day,space,month,persian->month]) is implemented, can I somehow achieve a similar result, perhaps in a not so clean way? Can one reduce the result of \currentdate to a simple number by stripping the additional stuff that is there? Similarly, can I force \currentdate to expand or is it a fundamental implementation limitation? Can I access day, month and year values in Lua, to run some if statements, etc.? For instance, if it is the first day of April, change the font of the document or something like that. —MHB On Thu, Jul 7, 2016 at 7:32 PM, Wolfgang Schuster < schuster.wolfgang@gmail.com> wrote: > Mohammad Hossein Bateni <bateni@gmail.com> > 7. Juli 2016 um 16:31 > Thanks, Wolfgang! > > BTW why doesn't the following work? it gives the 'missing number' error. > > % \mainlanguage[en] > \romannumerals{\currentdate[day]} > > 1. The \currentdate command isn’t expandable and is therefore not expanded > when you use it as argument for another command. > > 2. The \romannumerals commands expects a number as argument but > \currentdate returns more than a simple number. > > Wolfgang > > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > > ___________________________________________________________________________________ > [-- Attachment #1.2: Type: text/html, Size: 3566 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: \mainlanguage[pe] 2016-07-06 18:02 \mainlanguage[pe] Mohammad Hossein Bateni 2016-07-06 18:30 ` \mainlanguage[pe] Wolfgang Schuster @ 2016-07-07 5:20 ` Mojca Miklavec 1 sibling, 0 replies; 11+ messages in thread From: Mojca Miklavec @ 2016-07-07 5:20 UTC (permalink / raw) To: mailing list for ConTeXt users On 6 July 2016 at 20:02, Mohammad Hossein Bateni wrote: > Hello, > > This was lost in the other thread, so I'm starting a fresh one dedicated to > the question. > > 1) \showinstalledlanguages does not show pe/persian/fa or anything like that > but it has several arabic variants. was this dropped in MkIV or was there > never a persian language environment even in MkII? MkII (read: ConTeXt with pdfTeX) doesn't support typesetting in Arabic script at all. And support for XeTeX has always been limited in ConTeXt. So it's not really strange if the language support is still missing. It can only work in MkIV (and potentially in XeTeX, but I'm not sure how much effort would be needed to make it work properly in XeTeX). So feel free to contribute the translations as Wolfgang suggested. Mojca ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2016-08-01 16:31 UTC | newest] Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-07-06 18:02 \mainlanguage[pe] Mohammad Hossein Bateni 2016-07-06 18:30 ` \mainlanguage[pe] Wolfgang Schuster 2016-07-07 8:53 ` \mainlanguage[pe] Mohammad Hossein Bateni 2016-07-07 12:40 ` \mainlanguage[pe] Mohammad Hossein Bateni 2016-07-07 21:28 ` \mainlanguage[pe] Hans Hagen 2016-07-08 9:40 ` \mainlanguage[pe] Meer, Hans van der 2016-07-07 14:02 ` \mainlanguage[pe] Wolfgang Schuster 2016-07-07 14:31 ` \mainlanguage[pe] Mohammad Hossein Bateni 2016-07-07 17:32 ` \mainlanguage[pe] Wolfgang Schuster 2016-08-01 16:31 ` \mainlanguage[pe] Mohammad Hossein Bateni 2016-07-07 5:20 ` \mainlanguage[pe] Mojca Miklavec
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).