* Fwd: issue: multiple viewer layers [not found] <CANJfosGOB7SLzH+eamnj4ELqEx=SZCBp3Wm0rH=Pq6_jSfdXzw@mail.gmail.com> @ 2019-01-07 14:37 ` User 19087 2019-01-07 18:10 ` Hans Hagen 2019-01-09 5:46 ` User 19087 0 siblings, 2 replies; 3+ messages in thread From: User 19087 @ 2019-01-07 14:37 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 1242 bytes --] Layers are not properly closed when using more than one layer, so that each layer subsumes all subsequent content. Tested in Adobe Reader 11. I first mentioned this at https://tex.stackexchange.com/a/467005/174577, so I'm basically rehashing all the examples: When \showallmakeup is enabled, all content after \viewerlayer[print] belongs to that layer: \defineviewerlayer[print][state=stop,printable=yes,] \showallmakeup \starttext \viewerlayer[print]{One} more. \samplefile{knuth} \stoptext The same problem as above, demonstrated with \start...stopviewerlayer rather than \viewerlayer: \defineviewerlayer[print][state=stop,printable=yes,] \showallmakeup \starttext \startviewerlayer[print] And then: \stopviewerlayer \samplefile{knuth} \stoptext Rather than two independent layers, the print layer (along with other content) belongs to the view layer. So hiding the view layer hides all content in this document: [view] --- first --- \samplefile{knuth} --- [print] ------ second \defineviewerlayer[print][state=stop,printable=yes,] \defineviewerlayer[view][state=start,printable=no,] \starttext \startviewerlayer[view]{first} \samplefile{knuth} \startviewerlayer[print]{second} \stoptext [-- Attachment #1.2: Type: text/html, Size: 1575 bytes --] [-- Attachment #2: Type: text/plain, Size: 492 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: Fwd: issue: multiple viewer layers 2019-01-07 14:37 ` Fwd: issue: multiple viewer layers User 19087 @ 2019-01-07 18:10 ` Hans Hagen 2019-01-09 5:46 ` User 19087 1 sibling, 0 replies; 3+ messages in thread From: Hans Hagen @ 2019-01-07 18:10 UTC (permalink / raw) To: mailing list for ConTeXt users, User 19087 On 1/7/2019 3:37 PM, User 19087 wrote: > Layers are not properly closed when using more than one layer, so that > each layer subsumes all subsequent content. Tested in Adobe Reader 11. I > first mentioned this at https://tex.stackexchange.com/a/467005/174577, > so I'm basically rehashing all the examples: > > When \showallmakeup is enabled, all content after \viewerlayer[print] > belongs to that layer: probably because it gets applied at a different stage ... but it's a tracing feature so normally not used with other layers > \defineviewerlayer[print][state=stop,printable=yes,] > \defineviewerlayer[view][state=start,printable=no,] > \starttext > \startviewerlayer[view]{first} > \samplefile{knuth} > \startviewerlayer[print]{second} > \stoptext missing \stop's there .. the next at first sight looks ok here so what version are you running? \nopdfcompression \defineviewerlayer[one] \defineviewerlayer[two] \noheaderandfooterlines \starttext \startlines BEFORE LAYER \startviewerlayer[one] INSIDE LAYER ONE \startviewerlayer[two] INSIDE LAYER ONE AND TWO \stopviewerlayer INSIDE LAYER ONE \stopviewerlayer AFTER LAYER \stoplines \stoptext ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 3+ messages in thread
* Re: issue: multiple viewer layers 2019-01-07 14:37 ` Fwd: issue: multiple viewer layers User 19087 2019-01-07 18:10 ` Hans Hagen @ 2019-01-09 5:46 ` User 19087 1 sibling, 0 replies; 3+ messages in thread From: User 19087 @ 2019-01-09 5:46 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 102 bytes --] You're right, my example was broken. With \stops it works as intended, as does your example. Thanks, [-- Attachment #1.2: Type: text/html, Size: 158 bytes --] [-- Attachment #2: Type: text/plain, Size: 492 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 3+ messages in thread
end of thread, other threads:[~2019-01-09 5:46 UTC | newest] Thread overview: 3+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <CANJfosGOB7SLzH+eamnj4ELqEx=SZCBp3Wm0rH=Pq6_jSfdXzw@mail.gmail.com> 2019-01-07 14:37 ` Fwd: issue: multiple viewer layers User 19087 2019-01-07 18:10 ` Hans Hagen 2019-01-09 5:46 ` User 19087
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).