* Pgfplots - passing point coordinates by Lua
@ 2014-02-15 19:38 Lukáš Procházka
2014-02-16 19:32 ` Herbert Voss
2014-02-16 23:00 ` Jaroslav Hajtmar
0 siblings, 2 replies; 7+ messages in thread
From: Lukáš Procházka @ 2014-02-15 19:38 UTC (permalink / raw)
To: ConTeXt
[-- Attachment #1: Type: text/plain, Size: 1617 bytes --]
Hello,
I just started experimenting with pgfplots package.
I'd have two questions:
1) When plotting/loading a data file: Is it possible to specify the comment mark, which is '#' and '%" by default? I'd need to treat ';' as a comment mark, too.
2) How to pass coordinates of plot points by Lua?
The following code:
----
\usemodule[tikz]
\usemodule[pgfplots]
\startluacode
data = {{5, 15}, {20, 20}, {24, -24}}
plot = function(data)
local str
for i, v in ipairs(data) do
str = (str or "") .. "(" .. v[1] .. "," .. v[2] .. ")"
end
print("Crds=", str)
context(str)
end
\stopluacode
\starttext
\starttikzpicture
\startaxis[]
\addplot[mark=none,color=red] coordinates {(11, 5) (12, 18)}; % THIS PLOT IS OK
\addplot[mark=none,color=red] coordinates {\ctxlua{plot(data)}}; % THIS PLOT HAS NO POINT (?!)
\stopaxis
\stoptikzpicture
\stoptext
----
gives error:
"
...
fonts > fallback modern rm 12pt is loaded
Crds= (5,15)(20,20)(24,-24)
Package pgfplots: Error! Sorry, I could not read the plot coordinates near '(5,15)(20,20)(24,-24)'. Please check for format mistakes.
! Package pgfplots Warning: the current plot has no coordinates (or all have been filtered away)...
"
Any idea from someone more familiar with pgfplots would be appreciated.
TIA.
Best regards,
Lukas
--
Ing. Lukáš Procházka [mailto:LPr@pontex.cz]
Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz]
Bezová 1658
147 14 Praha 4
Tel: +420 241 096 751
Fax: +420 244 461 038
[-- Attachment #2: t-Plot2.mkiv --]
[-- Type: application/octet-stream, Size: 550 bytes --]
\usemodule[tikz]
\usemodule[pgfplots]
\startluacode
data = {{5, 15}, {20, 20}, {24, -24}}
plot = function(data)
local str
for i, v in ipairs(data) do
str = (str or "") .. "(" .. v[1] .. "," .. v[2] .. ")"
end
print("Crds=", str)
context(str)
end
\stopluacode
\starttext
\starttikzpicture
\startaxis[]
\addplot[mark=none,color=red] coordinates {(11, 5) (12, 18)};
\addplot[mark=none,color=red] coordinates {\ctxlua{plot(data)}};
\stopaxis
\stoptikzpicture
\stoptext
[-- Attachment #3: t-Plot2.pdf --]
[-- Type: application/pdf, Size: 7571 bytes --]
[-- Attachment #4: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Pgfplots - passing point coordinates by Lua
2014-02-15 19:38 Pgfplots - passing point coordinates by Lua Lukáš Procházka
@ 2014-02-16 19:32 ` Herbert Voss
2014-02-16 20:39 ` Lukáš Procházka
2014-02-16 23:00 ` Jaroslav Hajtmar
1 sibling, 1 reply; 7+ messages in thread
From: Herbert Voss @ 2014-02-16 19:32 UTC (permalink / raw)
To: ntg-context
Am 15.02.2014 20:38, schrieb Lukáš Procházka:
> ...
> fonts > fallback modern rm 12pt is loaded
> Crds= (5,15)(20,20)(24,-24)
> Package pgfplots: Error! Sorry, I could not read the plot coordinates
> near '(5,15)(20,20)(24,-24)'. Please check for format mistakes.
> ! Package pgfplots Warning: the current plot has no coordinates (or all
> have been filtered away)...
> "
>
> Any idea from someone more familiar with pgfplots would be appreciated.
As far as I know \addplot scans the coordinates in a way that a
macro is not possible here . However, write your coodinates into an
external file and read it with
\addplot table {<file.data>};
That will work.
Herbert
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Pgfplots - passing point coordinates by Lua
2014-02-16 19:32 ` Herbert Voss
@ 2014-02-16 20:39 ` Lukáš Procházka
2014-02-16 21:56 ` Herbert Voss
0 siblings, 1 reply; 7+ messages in thread
From: Lukáš Procházka @ 2014-02-16 20:39 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1: Type: text/plain, Size: 1584 bytes --]
Hello Herbert,
On Sun, 16 Feb 2014 20:32:11 +0100, Herbert Voss <Herbert.Voss@fu-berlin.de> wrote:
> As far as I know \addplot scans the coordinates in a way that a
> macro is not possible here . However, write your coodinates into an
> external file and read it with
I was aware of this solution; however, I was looking for another way due to performance reason and to avoid having too many temporary (data) files.
>
> \addplot table {<file.data>};
>
> That will work.
It seems I found a more Lua way:
----
\usemodule[pgfplots]
\startluacode
data = {{5, 15}, {20, 20}, {24, -24}}
data2crds = function(data)
local str
for i, v in ipairs(data) do
str = (str or "") .. "(" .. v[1] .. "," .. v[2] .. ")"
end
print("Crds=", str)
return str
end
--
plot = function(data)
context.starttikzpicture()
context.startaxis{}
context.addplot{mark="none",color="red"}
context("coordinates {" .. data2crds(data) .. "};")
context.stopaxis()
context.stoptikzpicture()
end
\stopluacode
\starttext
\starttikzpicture
\startaxis[]
\addplot[mark=none,color=red] coordinates {(11, 5) (12, 18)};
\stopaxis
\stoptikzpicture
\ctxlua{plot(data)}
\stoptext
----
Anyway, thanks.
Best regards,
Lukas
>
> Herbert
--
Ing. Lukáš Procházka [mailto:LPr@pontex.cz]
Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz]
Bezová 1658
147 14 Praha 4
Tel: +420 241 096 751
Fax: +420 244 461 038
[-- Attachment #2: t-Plot3.mkiv --]
[-- Type: application/octet-stream, Size: 759 bytes --]
\usemodule[pgfplots]
\startluacode
data = {{5, 15}, {20, 20}, {24, -24}}
data2crds = function(data)
local str
for i, v in ipairs(data) do
str = (str or "") .. "(" .. v[1] .. "," .. v[2] .. ")"
end
print("Crds=", str)
return str
end
--
plot = function(data)
context.starttikzpicture()
context.startaxis{}
context.addplot{mark="none",color="red"}
context("coordinates {" .. data2crds(data) .. "};")
context.stopaxis()
context.stoptikzpicture()
end
\stopluacode
\starttext
\starttikzpicture
\startaxis[]
\addplot[mark=none,color=red] coordinates {(11, 5) (12, 18)};
\stopaxis
\stoptikzpicture
\ctxlua{plot(data)}
\stoptext
[-- Attachment #3: t-Plot3.pdf --]
[-- Type: application/pdf, Size: 8375 bytes --]
[-- Attachment #4: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Pgfplots - passing point coordinates by Lua
2014-02-16 20:39 ` Lukáš Procházka
@ 2014-02-16 21:56 ` Herbert Voss
0 siblings, 0 replies; 7+ messages in thread
From: Herbert Voss @ 2014-02-16 21:56 UTC (permalink / raw)
To: ntg-context
Am 16.02.2014 21:39, schrieb Lukáš Procházka:
> \startluacode
> data = {{5, 15}, {20, 20}, {24, -24}}
>
> data2crds = function(data)
> local str
>
> for i, v in ipairs(data) do
> str = (str or "") .. "(" .. v[1] .. "," .. v[2] .. ")"
> end
>
> print("Crds=", str)
>
> return str
> end
>
> --
>
> plot = function(data)
> context.starttikzpicture()
> context.startaxis{}
> context.addplot{mark="none",color="red"}
> context("coordinates {" .. data2crds(data) .. "};")
this line would be enough with \ctxlua{...}
Herbert
> context.stopaxis()
> context.stoptikzpicture()
> end
> \stopluacode
>
> \starttext
> \starttikzpicture
> \startaxis[]
> \addplot[mark=none,color=red] coordinates {(11, 5) (12, 18)};
> \stopaxis
> \stoptikzpicture
>
> \ctxlua{plot(data)}
> \stoptext
> ----
>
> Anyway, thanks.
>
> Best regards,
>
> Lukas
>
>>
>> Herbert
>
>
>
>
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
>
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Pgfplots - passing point coordinates by Lua
2014-02-15 19:38 Pgfplots - passing point coordinates by Lua Lukáš Procházka
2014-02-16 19:32 ` Herbert Voss
@ 2014-02-16 23:00 ` Jaroslav Hajtmar
2014-02-16 23:53 ` DesdeChaves
1 sibling, 1 reply; 7+ messages in thread
From: Jaroslav Hajtmar @ 2014-02-16 23:00 UTC (permalink / raw)
To: ntg-context
Hi Lukas.
A year ago, I tried something similar when I wanted to make an animated
pdf images.
With using Lua, I can not handle eventually, but for inspiration attach
a piece of code that demonstrates how get into buffer some parameters
without Lua code. Maybe it inspires you in your solution.
I apologize for dirty code, but I cutting it from my old library and my
context application. I did not clean it and I did not translate into
English. For those interested I can possibly do.
Jarda Hajtmar
Here is my example:
\usemodule[tikz]
\usemodule[pgfplots]
%\define[1]\ListEntry{#1\par}
%\processcommalist[one,two,{three,four}]\ListEntry
%\processseparatedlist[one*two*three,four][*]\ListEntry
\def\zpracujparametry[#1]#2%
{\processcommalist[#1]{\nastavparametr{#2}}}
% Použití:
% \zpracujparametry[1,5,3.7,4,5,8,9,11]{
% \getbuffer[funkce1]
% \page
% }
\def\ZPRACUJPARAMETRY#1[#2]#3%
{\processseparatedlist[#2][#1]{\nastavparametr{#3}}}
% Použití:
% \ZPRACUJPARAMETRY{znak separátoru}[1,5,3.7,4,5,8,9,11]{
% \getbuffer[funkce1]
% \page
% }
\def\pmparametr#1=$#2${\global\def\parametr{#1}\global\def\mparametr{#2}}
\def\nastavparametry#1#2{\pmparametr#2\global\def\pparametr{#2}#1}%
\def\zpracujdvojparametry[#1]#2%
{\processcommalist[#1]{\nastavparametry{#2}}}
% Použití:
% \zpracujdvojparametry[1=$a$,5=$b$,3.7=$c$,4=$d$,5=$e$,8=$f$,9=$g$,11=$h$]{
% \getbuffer[funkce1]
% \page
% }
\def\ZPRACUJDVOJPARAMETRY#1[#2]#3%
{\processseparatedlist[#2][#1]{\nastavparametry{#3}}}
% Použití:
%
\ZPRACUJDVOJPARAMETRY{;}[1=$a$;5=$b$;3.7=$c$;4=$d$;5=$e$;8=$f$;9=$g$;11=$h$]{
% \getbuffer[funkce1]
% \page
% }
\startbuffer[goniometrickefunkce]
\def\function{cos(deg(\x+\parametr))}
\def\permfunction{cos(deg(\x))}
\def\permfunctiontwo{sin(deg(\x))}
\startTEXpage
\starttikzpicture[scale=1]
\tikzset{style={font=\ssxx}}
\startaxis
[xmin=-1.6,
xmax=10,
domain=-1.6:10,
ymin=-1.1,
ymax=1.1,
width=\textwidth,
height=0.3\textwidth,
axis x line=middle,
axis y line=middle,
axis equal=true,
xlabel=$x$,
ylabel=$y$,
samples=600,
clip=true,
xtick={0},
ytick={-1,0,1},
grid=major,
extra x ticks={-1.57,1.57,3.14,4.71,6.28,7.85,9.42,10.99,12.57}, extra x
tick
labels={$-\frac{\pi}{2}$,$\frac{\pi}{2}$,$\pi$,$3\!\frac{\pi}{2}$,$2\pi$,$5\!\frac{\pi}{2}$,$3\pi$},
title={{\framed[frame=off,height=1cm]{\blue $\ssb f\!:\ y=\cos{(x
\mparametr )}$}}},
]
\addplot[color=yellow, line width=0.5pt] {\permfunctiontwo};
\addplot[color=red, line width=0.5pt] {\permfunction};
\addplot[color=blue, line width=1pt] {\function};
\stopaxis
\stoptikzpicture
\stopTEXpage
\stopbuffer
\starttext
\ZPRACUJDVOJPARAMETRY{*}[1.57=$+\frac{\pi}{2}$*1.047=$+\frac{\pi}{3}$*0.785=$+\frac{\pi}{4}$*0.524=$+\frac{\pi}{6}$*0=$-0$*-0.524=$-\frac{\pi}{6}$*-0.785=$-\frac{\pi}{4}$*-1.047=$-\frac{\pi}{3}$*-1.57=$-\frac{\pi}{2}$*-3.142=$-\pi$*-4.712=$-\frac{3\pi}{2}$*6.28=$-2\pi$]{
\getbuffer[goniometrickefunkce]
\page
}
\stoptext
Dne 15.2.2014 20:38, Lukáš Procházka napsal(a):
> Hello,
>
> I just started experimenting with pgfplots package.
>
> I'd have two questions:
>
> 1) When plotting/loading a data file: Is it possible to specify the
> comment mark, which is '#' and '%" by default? I'd need to treat ';'
> as a comment mark, too.
>
> 2) How to pass coordinates of plot points by Lua?
>
> The following code:
>
> ----
> \usemodule[tikz]
> \usemodule[pgfplots]
>
> \startluacode
> data = {{5, 15}, {20, 20}, {24, -24}}
>
> plot = function(data)
> local str
>
> for i, v in ipairs(data) do
> str = (str or "") .. "(" .. v[1] .. "," .. v[2] .. ")"
> end
>
> print("Crds=", str)
>
> context(str)
> end
> \stopluacode
>
> \starttext
> \starttikzpicture
> \startaxis[]
> \addplot[mark=none,color=red] coordinates {(11, 5) (12, 18)}; % THIS
> PLOT IS OK
> \addplot[mark=none,color=red] coordinates {\ctxlua{plot(data)}}; %
> THIS PLOT HAS NO POINT (?!)
> \stopaxis
> \stoptikzpicture
> \stoptext
> ----
>
> gives error:
>
> "
> ...
> fonts > fallback modern rm 12pt is loaded
> Crds= (5,15)(20,20)(24,-24)
> Package pgfplots: Error! Sorry, I could not read the plot coordinates
> near '(5,15)(20,20)(24,-24)'. Please check for format mistakes.
> ! Package pgfplots Warning: the current plot has no coordinates (or
> all have been filtered away)...
> "
>
> Any idea from someone more familiar with pgfplots would be appreciated.
>
> TIA.
>
> Best regards,
>
> Lukas
>
>
>
>
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Pgfplots - passing point coordinates by Lua
2014-02-16 23:00 ` Jaroslav Hajtmar
@ 2014-02-16 23:53 ` DesdeChaves
2014-02-17 0:11 ` Jaroslav Hajtmar
0 siblings, 1 reply; 7+ messages in thread
From: DesdeChaves @ 2014-02-16 23:53 UTC (permalink / raw)
To: hajtmar, mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 7256 bytes --]
Try this way:
\usemodule[tikz]
\usemodule[pgfplots]
\usemodule[pgfplotstable]
\starttext
\startluacode
local dados={};
for i=1,10 do
dados[i]=2*i
end
context("\\starttikzpicture")
context("\\pgfplotsset{width=10cm, compat=1.3, legend
style={font=\\tfx}}")
context("\\startaxis[")
context("xlabel={L (m) },")
context("ylabel={ $T^2 (s^2)$},legend cell align=left, legend pos=north
west]")
context("\\addplot[only marks] table[row sep=\\\\]{")
context("X Y\\\\")
for key,value in pairs(dados) do
context("%0.2f %0.1f \\\\", key, value)
end
context(" };")
context("\\addlegendentry{Experimental points}")
context("\\addplot table[row sep=\\\\,")
context("y={create col/linear regression={y=Y}}]{")
context("X Y\\\\")
for key,value in pairs(dados) do
context("%0.2f %0.1f \\\\", key, value)
end
context("};")
context("\\addlegendentry{")
context("$\\pgfmathprintnumber{\\pgfplotstableregressiona} \\cdot
x")
context("\\pgfmathprintnumber[print
sign]{\\pgfplotstableregressionb}$ lin. Regression}")
context("\\stopaxis")
context("\\stoptikzpicture")
\stopluacode
\stoptext
Jorge
2014-02-16 23:00 GMT+00:00 Jaroslav Hajtmar <hajtmar@gyza.cz>:
> Hi Lukas.
> A year ago, I tried something similar when I wanted to make an animated
> pdf images.
> With using Lua, I can not handle eventually, but for inspiration attach a
> piece of code that demonstrates how get into buffer some parameters without
> Lua code. Maybe it inspires you in your solution.
>
> I apologize for dirty code, but I cutting it from my old library and my
> context application. I did not clean it and I did not translate into
> English. For those interested I can possibly do.
>
> Jarda Hajtmar
>
> Here is my example:
>
>
> \usemodule[tikz]
> \usemodule[pgfplots]
>
> %\define[1]\ListEntry{#1\par}
> %\processcommalist[one,two,{three,four}]\ListEntry
> %\processseparatedlist[one*two*three,four][*]\ListEntry
> \def\zpracujparametry[#1]#2%
> {\processcommalist[#1]{\nastavparametr{#2}}}
> % Použití:
> % \zpracujparametry[1,5,3.7,4,5,8,9,11]{
> % \getbuffer[funkce1]
> % \page
> % }
>
>
> \def\ZPRACUJPARAMETRY#1[#2]#3%
> {\processseparatedlist[#2][#1]{\nastavparametr{#3}}}
> % Použití:
> % \ZPRACUJPARAMETRY{znak separátoru}[1,5,3.7,4,5,8,9,11]{
> % \getbuffer[funkce1]
> % \page
> % }
>
>
> \def\pmparametr#1=$#2${\global\def\parametr{#1}\global\def\mparametr{#2}}
>
> \def\nastavparametry#1#2{\pmparametr#2\global\def\pparametr{#2}#1}%
>
> \def\zpracujdvojparametry[#1]#2%
> {\processcommalist[#1]{\nastavparametry{#2}}}
> % Použití:
> % \zpracujdvojparametry[1=$a$,5=$b$,3.7=$c$,4=$d$,5=$e$,8=$f$,
> 9=$g$,11=$h$]{
> % \getbuffer[funkce1]
> % \page
> % }
>
> \def\ZPRACUJDVOJPARAMETRY#1[#2]#3%
> {\processseparatedlist[#2][#1]{\nastavparametry{#3}}}
> % Použití:
> % \ZPRACUJDVOJPARAMETRY{;}[1=$a$;5=$b$;3.7=$c$;4=$d$;5=$e$;8=$
> f$;9=$g$;11=$h$]{
> % \getbuffer[funkce1]
> % \page
> % }
>
>
>
> \startbuffer[goniometrickefunkce]
> \def\function{cos(deg(\x+\parametr))}
> \def\permfunction{cos(deg(\x))}
> \def\permfunctiontwo{sin(deg(\x))}
> \startTEXpage
> \starttikzpicture[scale=1]
> \tikzset{style={font=\ssxx}}
> \startaxis
> [xmin=-1.6,
> xmax=10,
> domain=-1.6:10,
> ymin=-1.1,
> ymax=1.1,
> width=\textwidth,
> height=0.3\textwidth,
> axis x line=middle,
> axis y line=middle,
> axis equal=true,
> xlabel=$x$,
> ylabel=$y$,
> samples=600,
> clip=true,
> xtick={0},
> ytick={-1,0,1},
> grid=major,
> extra x ticks={-1.57,1.57,3.14,4.71,6.28,7.85,9.42,10.99,12.57}, extra x
> tick labels={$-\frac{\pi}{2}$,$\frac{\pi}{2}$,$\pi$,$3\!\frac{
> \pi}{2}$,$2\pi$,$5\!\frac{\pi}{2}$,$3\pi$},
> title={{\framed[frame=off,height=1cm]{\blue $\ssb f\!:\ y=\cos{(x
> \mparametr )}$}}},
> ]
>
> \addplot[color=yellow, line width=0.5pt] {\permfunctiontwo};
> \addplot[color=red, line width=0.5pt] {\permfunction};
> \addplot[color=blue, line width=1pt] {\function};
>
> \stopaxis
> \stoptikzpicture
> \stopTEXpage
> \stopbuffer
>
>
>
>
>
>
>
>
>
> \starttext
>
> \ZPRACUJDVOJPARAMETRY{*}[1.57=$+\frac{\pi}{2}$*1.047=$+\
> frac{\pi}{3}$*0.785=$+\frac{\pi}{4}$*0.524=$+\frac{\pi}{6}$
> *0=$-0$*-0.524=$-\frac{\pi}{6}$*-0.785=$-\frac{\pi}{4}$*-1.
> 047=$-\frac{\pi}{3}$*-1.57=$-\frac{\pi}{2}$*-3.142=$-\pi$*-
> 4.712=$-\frac{3\pi}{2}$*6.28=$-2\pi$]{
> \getbuffer[goniometrickefunkce]
> \page
> }
>
> \stoptext
>
>
>
>
>
>
> Dne 15.2.2014 20:38, Lukáš Procházka napsal(a):
>
>> Hello,
>>
>> I just started experimenting with pgfplots package.
>>
>> I'd have two questions:
>>
>> 1) When plotting/loading a data file: Is it possible to specify the
>> comment mark, which is '#' and '%" by default? I'd need to treat ';' as a
>> comment mark, too.
>>
>> 2) How to pass coordinates of plot points by Lua?
>>
>> The following code:
>>
>> ----
>> \usemodule[tikz]
>> \usemodule[pgfplots]
>>
>> \startluacode
>> data = {{5, 15}, {20, 20}, {24, -24}}
>>
>> plot = function(data)
>> local str
>>
>> for i, v in ipairs(data) do
>> str = (str or "") .. "(" .. v[1] .. "," .. v[2] .. ")"
>> end
>>
>> print("Crds=", str)
>>
>> context(str)
>> end
>> \stopluacode
>>
>> \starttext
>> \starttikzpicture
>> \startaxis[]
>> \addplot[mark=none,color=red] coordinates {(11, 5) (12, 18)}; % THIS PLOT
>> IS OK
>> \addplot[mark=none,color=red] coordinates {\ctxlua{plot(data)}}; % THIS
>> PLOT HAS NO POINT (?!)
>> \stopaxis
>> \stoptikzpicture
>> \stoptext
>> ----
>>
>> gives error:
>>
>> "
>> ...
>> fonts > fallback modern rm 12pt is loaded
>> Crds= (5,15)(20,20)(24,-24)
>> Package pgfplots: Error! Sorry, I could not read the plot coordinates
>> near '(5,15)(20,20)(24,-24)'. Please check for format mistakes.
>> ! Package pgfplots Warning: the current plot has no coordinates (or all
>> have been filtered away)...
>> "
>>
>> Any idea from someone more familiar with pgfplots would be appreciated.
>>
>> TIA.
>>
>> Best regards,
>>
>> Lukas
>>
>>
>>
>>
>> ____________________________________________________________
>> _______________________
>> If your question is of interest to others as well, please add an entry to
>> the Wiki!
>>
>> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/
>> listinfo/ntg-context
>> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
>> archive : http://foundry.supelec.fr/projects/contextrev/
>> wiki : http://contextgarden.net
>> ____________________________________________________________
>> _______________________
>>
>
> ____________________________________________________________
> _______________________
> If your question is of interest to others as well, please add an entry to
> the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/
> listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : http://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ____________________________________________________________
> _______________________
>
--
Atentamente
DesdeChaves
[-- Attachment #1.2: Type: text/html, Size: 9973 bytes --]
[-- Attachment #2: Type: text/plain, Size: 485 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: Pgfplots - passing point coordinates by Lua
2014-02-16 23:53 ` DesdeChaves
@ 2014-02-17 0:11 ` Jaroslav Hajtmar
0 siblings, 0 replies; 7+ messages in thread
From: Jaroslav Hajtmar @ 2014-02-17 0:11 UTC (permalink / raw)
To: DesdeChaves; +Cc: mailing list for ConTeXt users
Thanks Jorge
for the helpful and useful instructions. Sometimes it will certainly
come in handy.
Jaroslav Hajtmar
Dne 17.2.2014 0:53, DesdeChaves napsal(a):
> \usemodule[tikz]
> \usemodule[pgfplots]
> \usemodule[pgfplotstable]
>
> \starttext
>
> \startluacode
>
> local dados={};
>
> for i=1,10 do
> dados[i]=2*i
> end
>
> context("\\starttikzpicture")
> context("\\pgfplotsset{width=10cm, compat=1.3, legend
> style={font=\\tfx}}")
> context("\\startaxis[")
> context("xlabel={L (m) },")
> context("ylabel={ $T^2 (s^2)$},legend cell align=left, legend
> pos=north west]")
> context("\\addplot[only marks] table[row sep=\\\\]{")
> context("X Y\\\\")
> for key,value in pairs(dados) do
> context("%0.2f %0.1f \\\\", key, value)
> end
> context(" };")
> context("\\addlegendentry{Experimental points}")
> context("\\addplot table[row sep=\\\\,")
> context("y={create col/linear regression={y=Y}}]{")
> context("X Y\\\\")
> for key,value in pairs(dados) do
> context("%0.2f %0.1f \\\\", key, value)
> end
> context("};")
> context("\\addlegendentry{")
> context("$\\pgfmathprintnumber{\\pgfplotstableregressiona} \\cdot x")
> context("\\pgfmathprintnumber[print
> sign]{\\pgfplotstableregressionb}$ lin. Regression}")
> context("\\stopaxis")
> context("\\stoptikzpicture")
>
> \stopluacode
>
>
> \stoptext
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2014-02-17 0:11 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2014-02-15 19:38 Pgfplots - passing point coordinates by Lua Lukáš Procházka
2014-02-16 19:32 ` Herbert Voss
2014-02-16 20:39 ` Lukáš Procházka
2014-02-16 21:56 ` Herbert Voss
2014-02-16 23:00 ` Jaroslav Hajtmar
2014-02-16 23:53 ` DesdeChaves
2014-02-17 0:11 ` Jaroslav Hajtmar
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).