* \startstopcomment fails on latest beta
@ 2012-02-01 18:31 Marco Pessotto
2012-02-02 23:27 ` Hans Hagen
0 siblings, 1 reply; 6+ messages in thread
From: Marco Pessotto @ 2012-02-01 18:31 UTC (permalink / raw)
To: ntg-context
Hello there.
See the following minimal example. Without the \setupinteraction the
document compiles just fine.
%% begin
\setupinteraction[state=start]
\starttext
hello
\startcomment
This won’t be published
\stopcomment
\stoptext
%% end
Best regards.
Error log:
mtx-context | run 1: luatex --fmt="/media/data/melmoth/progetti/context-cutting-edge/tex/texmf-cache/luatex-cache/context/2448223e6631addb83df348d74153606/formats/cont-en" --lua="/media/data/melmoth/progetti/context-cutting-edge/tex/texmf-cache/luatex-cache/context/2448223e6631addb83df348d74153606/formats/cont-en.lui" --backend="pdf" "./min.tex" \stoptext
This is LuaTeX, Version beta-0.70.1-2011051923 (rev 4277)
\write18 enabled.
(min.tex
ConTeXt ver: 2012.01.25 14:16 MKIV fmt: 2012.2.1 int: english/english
system > cont-new.mkiv loaded
(/media/data/melmoth/progetti/context-cutting-edge/tex/texmf-context/tex/context/base/cont-new.mkiv
system > beware: some patches loaded from cont-new.mkiv
)
system > min.top loaded
(min.top)
fonts > latin modern fonts are not preloaded
languages > language en is active
{/media/data/melmoth/progetti/context-cutting-edge/tex/texmf-context/fonts/map/pdftex/context/mkiv-base.map}
fonts > preloading latin modern fonts (second stage)
fonts > typescripts > unknown: library 'loc'
{/media/data/melmoth/progetti/context-cutting-edge/tex/texmf/fonts/map/dvips/lm/lm-math.map}{/media/data/melmoth/progetti/context-cutting-edge/tex/texmf/fonts/map/dvips/lm/lm-rm.map}
fonts > fallback modern rm 12pt is loaded
check > missing or ungrouped '=' after 'comment' in line 10 (182>comment:)
! LuaTeX error ...edge/tex/texmf-context/tex/context/base/scrn-wid.lua:120: incorrect index value -1 for tex.setbox()
stack traceback:
[C]: ?
...edge/tex/texmf-context/tex/context/base/scrn-wid.lua:120: in function 'insertcomment'
<main ctx instance>:1: in main chunk.
system > tex > error on line 13 in file min.tex: LuaTeX error ...
3 \setupinteraction[state=start]
4
5 \starttext
6
7 hello
8
9 \startcomment
10
11 This won’t be published
12
13 >> \stopcomment
14
15 \stoptext
16
\ctxcommand ...\directlua \zerocount {commands.#1}
\184>normal ...\commentparameter \c!textlayer " }}
\wd \b_scrn_comment_link \...
\scrn_comment_stop ->\scrn_comment_inject
\egroup
l.13 \stopcomment
? X
--
Marco
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: \startstopcomment fails on latest beta
2012-02-01 18:31 \startstopcomment fails on latest beta Marco Pessotto
@ 2012-02-02 23:27 ` Hans Hagen
2012-02-03 9:13 ` Marco Pessotto
0 siblings, 1 reply; 6+ messages in thread
From: Hans Hagen @ 2012-02-02 23:27 UTC (permalink / raw)
To: mailing list for ConTeXt users; +Cc: Marco Pessotto
On 1-2-2012 19:31, Marco Pessotto wrote:
>
> Hello there.
>
> See the following minimal example. Without the \setupinteraction the
> document compiles just fine.
as there is no beta this week, you can patch yourself ... scrn-wid.lua
... should either have
b_scrn_comment_link
or
scrn_comment_box_link
(depending on what's n your system; you can search in scrn-wid.mkiv for
the right box name)
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: \startstopcomment fails on latest beta
2012-02-02 23:27 ` Hans Hagen
@ 2012-02-03 9:13 ` Marco Pessotto
2012-02-03 14:19 ` Wolfgang Schuster
0 siblings, 1 reply; 6+ messages in thread
From: Marco Pessotto @ 2012-02-03 9:13 UTC (permalink / raw)
To: Hans Hagen; +Cc: mailing list for ConTeXt users
Hans Hagen <pragma@wxs.nl> writes:
> On 1-2-2012 19:31, Marco Pessotto wrote:
>>
>> Hello there.
>>
>> See the following minimal example. Without the \setupinteraction the
>> document compiles just fine.
>
> as there is no beta this week, you can patch yourself ... scrn-wid.lua
> ... should either have
>
> b_scrn_comment_link
>
> or
>
> scrn_comment_box_link
>
> (depending on what's n your system; you can search in scrn-wid.mkiv
> for the right box name)
>
Well, I've applied this change and executed context --make
--- ./tex/texmf-context/tex/context/base/scrn-wid.lua~ 2011-05-24 11:32:54.000000000 +0200
+++ ./tex/texmf-context/tex/context/base/scrn-wid.lua 2012-02-03 09:44:14.000000000 +0100
@@ -117,7 +117,7 @@
end
function commands.insertcomment(specification)
- tex.box["scrn_comment_box_link"] = comments.insert(specification)
+ tex.box["b_scrn_comment_link"] = comments.insert(specification)
end
-- Soundclips
This is better, as the compilation doesn't fail and the comment appears
as comment, but on the page there is a literal "[title=,]" (in the first
example) or "[title=commentname,]" in the second and third example.
\setupinteraction[state=start]
\starttext
Regular 1
\startcomment
1. This won't be published, but attached as a comment
\stopcomment
Regular 2
\startcomment[commentname]
2. This won't be published, but attached as a comment
\stopcomment
Regular 3
\startcomment[commentname][]
3. This won't be published, but attached as a comment
\stopcomment
\stoptext
There is no problem in the "current" version (2011.05.18), but is
present in version 2011.11.29 23:11 (which is the other previous version
I have on my machine).
Thanks for your attention and all your work.
Best regards.
--
Marco
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: \startstopcomment fails on latest beta
2012-02-03 9:13 ` Marco Pessotto
@ 2012-02-03 14:19 ` Wolfgang Schuster
2012-02-03 14:54 ` Marco Pessotto
2012-02-03 15:13 ` Hans Hagen
0 siblings, 2 replies; 6+ messages in thread
From: Wolfgang Schuster @ 2012-02-03 14:19 UTC (permalink / raw)
To: mailing list for ConTeXt users; +Cc: Hans Hagen
Am 03.02.2012 um 10:13 schrieb Marco Pessotto:
> This is better, as the compilation doesn't fail and the comment appears
> as comment, but on the page there is a literal "[title=,]" (in the first
> example) or "[title=commentname,]" in the second and third example.
scrn-wid.mkvi
\def\scrn_comment_start_indeed[#title][#settings]%
{\bgroup
\doifassignmentelse{#title}
- {\setupcurrentcomment[\currentcomment][#title]}
- {\setupcurrentcomment[\currentcomment][\c!title=#title,#settings]}%
+ {\setupcurrentcomment[#title]}
+ {\setupcurrentcomment[\c!title=#title,#settings]}%
\def\scrn_comment_stop{\scrn_comment_inject\egroup}%
\grabbufferdatadirect\v!comment{\e!start\currentcomment}{\e!stop\currentcomment}}
@Hans: \scrn_comment_start_indeed is defined twice
\def\scrn_comment_start_indeed
{\doifelse{\commentparameter\c!state}\v!start
{\scrn_comment_start_indeed}
{\scrn_comment_start_ignore}}
\def\scrn_comment_start_indeed[#title][#settings]%
{\bgroup
\doifassignmentelse{#title}
{\setupcurrentcomment[\currentcomment][#title]}
{\setupcurrentcomment[\currentcomment][\c!title=#title,#settings]}%
\def\scrn_comment_stop{\scrn_comment_inject\egroup}%
\grabbufferdatadirect\v!comment{\e!start\currentcomment}{\e!stop\currentcomment}}
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: \startstopcomment fails on latest beta
2012-02-03 14:19 ` Wolfgang Schuster
@ 2012-02-03 14:54 ` Marco Pessotto
2012-02-03 15:13 ` Hans Hagen
1 sibling, 0 replies; 6+ messages in thread
From: Marco Pessotto @ 2012-02-03 14:54 UTC (permalink / raw)
To: mailing list for ConTeXt users; +Cc: Hans Hagen
Wolfgang Schuster <schuster.wolfgang@googlemail.com> writes:
> Am 03.02.2012 um 10:13 schrieb Marco Pessotto:
>
>> This is better, as the compilation doesn't fail and the comment appears
>> as comment, but on the page there is a literal "[title=,]" (in the first
>> example) or "[title=commentname,]" in the second and third example.
>
> scrn-wid.mkvi
>
> \def\scrn_comment_start_indeed[#title][#settings]%
> {\bgroup
> \doifassignmentelse{#title}
> - {\setupcurrentcomment[\currentcomment][#title]}
> - {\setupcurrentcomment[\currentcomment][\c!title=#title,#settings]}%
> + {\setupcurrentcomment[#title]}
> + {\setupcurrentcomment[\c!title=#title,#settings]}%
> \def\scrn_comment_stop{\scrn_comment_inject\egroup}%
> \grabbufferdatadirect\v!comment{\e!start\currentcomment}{\e!stop\currentcomment}}
>
Tested and works like a charm. Thanks a lot.
Best wishes
--
Marco
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: \startstopcomment fails on latest beta
2012-02-03 14:19 ` Wolfgang Schuster
2012-02-03 14:54 ` Marco Pessotto
@ 2012-02-03 15:13 ` Hans Hagen
1 sibling, 0 replies; 6+ messages in thread
From: Hans Hagen @ 2012-02-03 15:13 UTC (permalink / raw)
To: Wolfgang Schuster; +Cc: mailing list for ConTeXt users
On 3-2-2012 15:19, Wolfgang Schuster wrote:
> @Hans: \scrn_comment_start_indeed is defined twice
>
> \def\scrn_comment_start_indeed
> {\doifelse{\commentparameter\c!state}\v!start
> {\scrn_comment_start_indeed}
> {\scrn_comment_start_ignore}}
>
> \def\scrn_comment_start_indeed[#title][#settings]%
> {\bgroup
> \doifassignmentelse{#title}
> {\setupcurrentcomment[\currentcomment][#title]}
> {\setupcurrentcomment[\currentcomment][\c!title=#title,#settings]}%
> \def\scrn_comment_stop{\scrn_comment_inject\egroup}%
> \grabbufferdatadirect\v!comment{\e!start\currentcomment}{\e!stop\currentcomment}}
should be
\unexpanded\def\scrn_comment_start#category%
{\def\currentcomment{#category}%
\doifelselocation
{\dodoubleempty\scrn_comment_start_status}
{\dodoubleempty\scrn_comment_start_ignore}}
\def\scrn_comment_start_status
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2012-02-03 15:13 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2012-02-01 18:31 \startstopcomment fails on latest beta Marco Pessotto
2012-02-02 23:27 ` Hans Hagen
2012-02-03 9:13 ` Marco Pessotto
2012-02-03 14:19 ` Wolfgang Schuster
2012-02-03 14:54 ` Marco Pessotto
2012-02-03 15:13 ` Hans Hagen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).