From: Matthias Weber <matweber@indiana.edu>
Subject: Re: Re: Failing on Mac OS X
Date: Tue, 2 Nov 2004 11:11:48 -0500 [thread overview]
Message-ID: <E63A24A8-2CE9-11D9-9236-0003934F9514@indiana.edu> (raw)
In-Reply-To: <84A463B6-2CE8-11D9-9A2B-003065BDAA76@ece.ucsb.edu>
[-- Attachment #1.1: Type: text/plain, Size: 4634 bytes --]
I had the same problem. Here is my (possibly incorrect) interpretation,
and how to fix it:
You have updated to the most recent context without updating texexec
(and pssoibly related packages). To do so,
uninstall your entire TeX tree (grin) by either doing this in
i-Installerm or by removing the i-Packages directory
from your home directory. Otherwise, i-Installer will always default to
your older installation setup.
You might also want to erase /usr/local/teTeX.
Then start again i-installer (get the most recent), and set it up to
expert mode, which lets you select the
most recent TeX installation. Follow the instructions at
http://www.uoregon.edu/~koch/texshop/texshop.html
to select the packages, and don't forget to install ConTeXt.
I suggest keeping an old installation on another boot partition or
backup drive, I can't guarantee
that certain things will not look different.
Matthias
On Nov 2, 2004, at 11:01 AM, Shivkumar Chandrasekaran wrote:
>
> On Nov 1, 2004, at 10:05 AM, "Patrick Gundlach" <patrick@gundla.ch>
>
>> Please post the complete output of a simple texexec run. And perhaps
>> you might want to have a look at the macosxtex mailinglist.
>>
>>
>> Patrick
>> --
>> ConTeXt wiki: http://contextgarden.net
>>
>
> Below is the output when I compile a file with the following 3 lines:
>
> \starttext
> Hello world
> \stoptext
>
> I am using the latest TeX and ConTeXt from Gerben Wierda's
> i-Installer. I am looking into the MacOSX TeX mailing list archives
> for any hints too. Thanks for any help and the pointer.
>
> --shiv--
>
>
> #
> #
> ################## Typesetting contextBug
> # this line is commented out
> texexec --pdf contextBug
>
>
> TeXExec 3.1 - ConTeXt / PRAGMA ADE 1997-2002
>
> executable : pdfetex
> format : cont-en
> inputfile : contextBug
> output : pdftex
> interface : en
> current mode : none
> TeX run : 1
>
> This is pdfeTeXk, Version 3.141592-1.11a-2.1 (Web2C 7.5.2)
> %&-line parsing enabled.
> (/usr/local/teTeX/share/texmf.tetex/web2c/cp8bit.tcx)
> entering extended mode
> (./contextBug.tex{/usr/local/teTeX/share/texmf.local/pdftex/config/
> pdftex.cfg}
>
> ConTeXt ver: 2004.10.07 fmt: 2004.10.25 int: english mes: english
>
> systems : pdfTeX version 111 -> please update
>
> systems : eTeX version 201 -> too old (bugs)
>
> language : language en is active
> <protectionstate 0>
> system : cont-new loaded
> (/usr/local/teTeX/share/texmf.local/tex/context/base/cont-new.tex
> systems : beware: some patches loaded from cont-new.tex!
> color : palette rollover is available
> system (E-TEX) : [line 966]
> system (E-TEX) : [line 1021]
> )
> system : cont-old loaded
> (/usr/local/teTeX/share/texmf.local/tex/context/base/cont-old.tex
> loading : Context Old Macros
> )
> system : cont-fil loaded
> (/usr/local/teTeX/share/texmf.local/tex/context/base/cont-fil.tex
> loading : Context File Synonyms
> )
> bodyfont : 12pt rm is loaded
> language : patterns en->default:default->1->2:2
> uk->default:default->2->2
> :2 de->texnansi:texnansi->3->2:2 de->ec:ec->4->2:2
> fr->texnansi:texnansi->5->2:
> 2 fr->ec:ec->6->2:2 es->default:default->7->2:2
> it->texnansi:texnansi->8->2:2 i
> t->ec:ec->9->2:2 nl->texnansi:texnansi->10->2:2 nl->ec:ec->11->2:2
> loaded
> specials : tex,postscript,rokicki loaded
> system : contextBug.top loaded
> (./contextBug.top
> specials : loading definition file tpd
> (/usr/local/teTeX/share/texmf.local/tex/context/base/spec-tpd.tex
> specials : loading definition file fdf
> (/usr/local/teTeX/share/texmf.local/tex/context/base/spec-fdf.tex
> <unprotect 3> <unprotect 4>
> system (E-TEX) : [line 2256] \ifcsname
> <protect 4> <protect 3>)
> specials : fdf loaded
> <unprotect 3> <protect 3>)
> specials : fdf,tpd loaded
> ! Undefined control sequence.
> <argument> \c!gebied
> ={/Users/shiv/}
> \xprocesscommaitem #1,#2->\if ,#1
> ,\@EA \xprocesscommaitem \else \if
> ]#1\@EAE...
>
> \xdogetparameters #1]->\xprocesscommaitem #1,]
> ,\@relax@
> \dosetupsystem [#1]->\getparameters [\??sv ][#1]
> \setuprandomize
> [\@@svrandom...
> l.3 \setupsystem[\c!gebied={/Users/shiv/}]
>
> ?
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
[-- Attachment #1.2: Type: text/enriched, Size: 4725 bytes --]
I had the same problem. Here is my (possibly incorrect)
interpretation, and how to fix it:
You have updated to the most recent context without updating texexec
(and pssoibly related packages). To do so,
uninstall your entire TeX tree (grin) by either doing this in
i-Installerm or by removing the i-Packages directory
from your home directory. Otherwise, i-Installer will always default
to your older installation setup.
You might also want to erase /usr/local/teTeX.
Then start again i-installer (get the most recent), and set it up to
expert mode, which lets you select the
most recent TeX installation. Follow the instructions at
http://www.uoregon.edu/~koch/texshop/texshop.html
to select the packages, and don't forget to install ConTeXt.
I suggest keeping an old installation on another boot partition or
backup drive, I can't guarantee
that certain things will not look different.
Matthias
On Nov 2, 2004, at 11:01 AM, Shivkumar Chandrasekaran wrote:
<excerpt>
On Nov 1, 2004, at 10:05 AM, "Patrick Gundlach" <<patrick@gundla.ch>
<excerpt>Please post the complete output of a simple texexec run. And
perhaps
you might want to have a look at the macosxtex mailinglist.
Patrick
--
ConTeXt wiki: http://contextgarden.net
</excerpt>
Below is the output when I compile a file with the following 3 lines:
\starttext
Hello world
\stoptext
I am using the latest TeX and ConTeXt from Gerben Wierda's
i-Installer. I am looking into the MacOSX TeX mailing list archives
for any hints too. Thanks for any help and the pointer.
--shiv--
<fixed><bigger>#
#
################## Typesetting contextBug
# this line is commented out
texexec --pdf contextBug
TeXExec 3.1 - ConTeXt / PRAGMA ADE 1997-2002
executable : pdfetex
format : cont-en
inputfile : contextBug
output : pdftex
interface : en
current mode : none
TeX run : 1
This is pdfeTeXk, Version 3.141592-1.11a-2.1 (Web2C 7.5.2)
%&-line parsing enabled.
(/usr/local/teTeX/share/texmf.tetex/web2c/cp8bit.tcx)
entering extended mode
(./contextBug.tex{/usr/local/teTeX/share/texmf.local/pdftex/config/pdftex.cfg}
ConTeXt ver: 2004.10.07 fmt: 2004.10.25 int: english mes: english
systems : pdfTeX version 111 -> please update
systems : eTeX version 201 -> too old (bugs)
language : language en is active
<<protectionstate 0>
system : cont-new loaded
(/usr/local/teTeX/share/texmf.local/tex/context/base/cont-new.tex
systems : beware: some patches loaded from cont-new.tex!
color : palette rollover is available
system (E-TEX) : [line 966]
system (E-TEX) : [line 1021]
)
system : cont-old loaded
(/usr/local/teTeX/share/texmf.local/tex/context/base/cont-old.tex
loading : Context Old Macros
)
system : cont-fil loaded
(/usr/local/teTeX/share/texmf.local/tex/context/base/cont-fil.tex
loading : Context File Synonyms
)
bodyfont : 12pt rm is loaded
language : patterns en->default:default->1->2:2
uk->default:default->2->2
:2 de->texnansi:texnansi->3->2:2 de->ec:ec->4->2:2
fr->texnansi:texnansi->5->2:
2 fr->ec:ec->6->2:2 es->default:default->7->2:2
it->texnansi:texnansi->8->2:2 i
t->ec:ec->9->2:2 nl->texnansi:texnansi->10->2:2 nl->ec:ec->11->2:2
loaded
specials : tex,postscript,rokicki loaded
system : contextBug.top loaded
(./contextBug.top
specials : loading definition file tpd
(/usr/local/teTeX/share/texmf.local/tex/context/base/spec-tpd.tex
specials : loading definition file fdf
(/usr/local/teTeX/share/texmf.local/tex/context/base/spec-fdf.tex
<<unprotect 3> <<unprotect 4>
system (E-TEX) : [line 2256] \ifcsname
<<protect 4> <<protect 3>)
specials : fdf loaded
<<unprotect 3> <<protect 3>)
specials : fdf,tpd loaded
<color><param>807F,0000,0000</param>! Undefined control sequence.
<<argument> \c!gebied
={/Users/shiv/}
\xprocesscommaitem #1,#2->\if ,#1
,\@EA \xprocesscommaitem \else \if
]#1\@EAE...
\xdogetparameters #1]->\xprocesscommaitem #1,]
,\@relax@
\dosetupsystem [#1]->\getparameters [\??sv ][#1]
\setuprandomize
[\@@svrandom...
l.<underline>3</underline> \setupsystem[\c!gebied={/Users/shiv/}]
</color>
<color><param>807F,0000,0000</param>? </color></bigger></fixed>
_______________________________________________
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
</excerpt>
[-- Attachment #2: Type: text/plain, Size: 139 bytes --]
_______________________________________________
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
next prev parent reply other threads:[~2004-11-02 16:11 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <20041101180518.A5497127A2@ronja.ntg.nl>
2004-11-02 16:01 ` Shivkumar Chandrasekaran
2004-11-02 16:11 ` Matthias Weber [this message]
2004-11-02 16:34 ` Hans Hagen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=E63A24A8-2CE9-11D9-9236-0003934F9514@indiana.edu \
--to=matweber@indiana.edu \
--cc=ntg-context@ntg.nl \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).