* label, caption and eps in figures?
@ 2009-06-12 15:43 Pau
2009-06-12 15:56 ` Hans Hagen
0 siblings, 1 reply; 13+ messages in thread
From: Pau @ 2009-06-12 15:43 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hello,
I am struggling to get something equivalent to this in ConTeXt:
---------------------------------------------------------------------
\begin{figure}
\resizebox{\hsize}{!}{\includegraphics[scale=1,bb=0 0 0 0,clip]
{MyFigure.eps}}
\caption{My Caption
\label{fig.mylabel}
}
\end{figure}
---------------------------------------------------------------------
I am especially having difficulties with caption (I would need a bold
"Fig. 1" on it) and with the label. \ref{fig.mylabel} is not
recognised (see below).
Also, texexec seems to not understand the eps format
The closest I have got is this:
---------------------------------------------------------------------
\placeexternalfigure{\externalfigure[MyFigure][label=fig.mylabel,factor=broad,method=eps]
\addlegendentry{My Caption}
}
---------------------------------------------------------------------
Any help will be appreciated a lot
Pau
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: label, caption and eps in figures?
2009-06-12 15:43 label, caption and eps in figures? Pau
@ 2009-06-12 15:56 ` Hans Hagen
[not found] ` <6faad9f00906120859q1d7692aesc4bf1456c5a90405@mail.gmail.com>
0 siblings, 1 reply; 13+ messages in thread
From: Hans Hagen @ 2009-06-12 15:56 UTC (permalink / raw)
To: vim.unix, mailing list for ConTeXt users
Pau wrote:
> Hello,
>
> I am struggling to get something equivalent to this in ConTeXt:
>
> ---------------------------------------------------------------------
> \begin{figure}
> \resizebox{\hsize}{!}{\includegraphics[scale=1,bb=0 0 0 0,clip]
> {MyFigure.eps}}
> \caption{My Caption
> \label{fig.mylabel}
> }
> \end{figure}
> ---------------------------------------------------------------------
>
> I am especially having difficulties with caption (I would need a bold
> "Fig. 1" on it) and with the label. \ref{fig.mylabel} is not
> recognised (see below).
\starttext
\placefigure
{My Caption}
{\externalfigure[MyFigure.eps][factor=broad]}
\stoptext
by default pdftex is used; if you use eps, best convert them to pdf
first (once)
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: label, caption and eps in figures?
[not found] ` <6faad9f00906120859q1d7692aesc4bf1456c5a90405@mail.gmail.com>
@ 2009-06-12 20:40 ` Pau
2009-06-12 21:33 ` Hans Hagen
0 siblings, 1 reply; 13+ messages in thread
From: Pau @ 2009-06-12 20:40 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hello,
thanks for the hint. The legend worked very well.
Nevertheless, I still have not understood what the equivalent in
ConTeXt of LaTeX \ref{} <---> \label{} is
---------------------------------------------------------------------------
\begin{equation}
1 + 1 = 2
\label{eq.1}
\end{equation}
In Eq. \ref{eq.1}, we show that one plus one equals two
----------------------------------------------------------------------------
How would you write that in ConTeXt?
And for a figure?
thanks for your patience,
Pau
>>> "Fig. 1" on it) and with the label. \ref{fig.mylabel} is not
>>> recognised (see below).
>>
>
> \setuplabeltext[en][figure=Fig. ]
>
>> \starttext
>>
>> \placefigure
> [fig.MyCaption]
>> {My Caption}
>> {\externalfigure[MyFigure.eps][factor=broad]}
>>
>> \stoptext
>
--
Let there be peace on earth. And let it begin with misc
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: label, caption and eps in figures?
2009-06-12 20:40 ` Pau
@ 2009-06-12 21:33 ` Hans Hagen
2009-06-13 12:15 ` Pau
0 siblings, 1 reply; 13+ messages in thread
From: Hans Hagen @ 2009-06-12 21:33 UTC (permalink / raw)
To: vim.unix, mailing list for ConTeXt users
Pau wrote:
> Hello,
>
> thanks for the hint. The legend worked very well.
>
> Nevertheless, I still have not understood what the equivalent in
> ConTeXt of LaTeX \ref{} <---> \label{} is
label is always an optional arg
refs go like: \in{figure}[label] or \at{page}[label]
> ---------------------------------------------------------------------------
> \begin{equation}
> 1 + 1 = 2
> \label{eq.1}
> \end{equation}
>
> In Eq. \ref{eq.1}, we show that one plus one equals two
> ----------------------------------------------------------------------------
>
> How would you write that in ConTeXt?
\placeformula[label]
\startformula
.....
\stopformula
> And for a figure?
\placefigure
[here] % location
[fig.MyCaption] % reference
{My Caption} % caption
{\externalfigure[MyFigure.eps][factor=broad]}
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: label, caption and eps in figures?
2009-06-12 21:33 ` Hans Hagen
@ 2009-06-13 12:15 ` Pau
2009-06-13 12:21 ` Wolfgang Schuster
2009-06-13 12:24 ` Hans Hagen
0 siblings, 2 replies; 13+ messages in thread
From: Pau @ 2009-06-13 12:15 UTC (permalink / raw)
To: Hans Hagen; +Cc: mailing list for ConTeXt users
Hello,
thanks a _lot_
Now I have converted all eps figures into pdf, but I am running yet
into another snag... the conversion seems to ruin the bounding box of
the eps figures, so that the pdf figures are taking a full a4 site;
when I then use them in the main tex file, they are filling a whole
page.
Is there a way to define a bounding box in \externalfigure ? I have
checked in the wikipage and googled a bit, but since English is not my
mother tongue, I may very well have used a bad keyword.
If not, can anybody point me to a way of modifying a pdf file to get
rid of all exterior white space around a figure? I can imagine you can
do this with adobe software, but I don't have that. Only unix.
thanks,
Pau
2009/6/12 Hans Hagen <pragma@wxs.nl>:
> Pau wrote:
>>
>> Hello,
>>
>> thanks for the hint. The legend worked very well.
>>
>> Nevertheless, I still have not understood what the equivalent in
>> ConTeXt of LaTeX \ref{} <---> \label{} is
>
> label is always an optional arg
>
> refs go like: \in{figure}[label] or \at{page}[label]
>
>
>>
>> ---------------------------------------------------------------------------
>> \begin{equation}
>> 1 + 1 = 2
>> \label{eq.1}
>> \end{equation}
>>
>> In Eq. \ref{eq.1}, we show that one plus one equals two
>>
>> ----------------------------------------------------------------------------
>>
>> How would you write that in ConTeXt?
>
> \placeformula[label]
> \startformula
> .....
> \stopformula
>
>> And for a figure?
>
> \placefigure
> [here] % location
> [fig.MyCaption] % reference
> {My Caption} % caption
> {\externalfigure[MyFigure.eps][factor=broad]}
>
> -----------------------------------------------------------------
> Hans Hagen | PRAGMA ADE
> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
> tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
> | www.pragma-pod.nl
> -----------------------------------------------------------------
>
--
Let there be peace on earth. And let it begin with misc
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: label, caption and eps in figures?
2009-06-13 12:15 ` Pau
@ 2009-06-13 12:21 ` Wolfgang Schuster
2009-06-13 12:24 ` Hans Hagen
1 sibling, 0 replies; 13+ messages in thread
From: Wolfgang Schuster @ 2009-06-13 12:21 UTC (permalink / raw)
To: vim.unix; +Cc: mailing list for ConTeXt users
Am 13.06.2009 um 14:15 schrieb Pau:
> Hello,
>
> thanks a _lot_
>
> Now I have converted all eps figures into pdf, but I am running yet
> into another snag... the conversion seems to ruin the bounding box of
> the eps figures, so that the pdf figures are taking a full a4 site;
> when I then use them in the main tex file, they are filling a whole
> page.
>
> Is there a way to define a bounding box in \externalfigure ? I have
> checked in the wikipage and googled a bit, but since English is not my
> mother tongue, I may very well have used a bad keyword.
>
> If not, can anybody point me to a way of modifying a pdf file to get
> rid of all exterior white space around a figure? I can imagine you can
> do this with adobe software, but I don't have that. Only unix.
pdfcrop
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: label, caption and eps in figures?
2009-06-13 12:15 ` Pau
2009-06-13 12:21 ` Wolfgang Schuster
@ 2009-06-13 12:24 ` Hans Hagen
2009-06-13 13:09 ` Pau
1 sibling, 1 reply; 13+ messages in thread
From: Hans Hagen @ 2009-06-13 12:24 UTC (permalink / raw)
To: vim.unix; +Cc: mailing list for ConTeXt users
Pau wrote:
> Hello,
>
> thanks a _lot_
>
> Now I have converted all eps figures into pdf, but I am running yet
> into another snag... the conversion seems to ruin the bounding box of
> the eps figures, so that the pdf figures are taking a full a4 site;
> when I then use them in the main tex file, they are filling a whole
> page.
>
> Is there a way to define a bounding box in \externalfigure ? I have
> checked in the wikipage and googled a bit, but since English is not my
> mother tongue, I may very well have used a bad keyword.
>
> If not, can anybody point me to a way of modifying a pdf file to get
> rid of all exterior white space around a figure? I can imagine you can
> do this with adobe software, but I don't have that. Only unix.
there is a pdtopdf script in the distribution (ruby script that needs
gs) that can do it that way (by default it uses the boundingbox)
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: label, caption and eps in figures?
2009-06-13 12:24 ` Hans Hagen
@ 2009-06-13 13:09 ` Pau
2009-06-24 11:25 ` Pau
0 siblings, 1 reply; 13+ messages in thread
From: Pau @ 2009-06-13 13:09 UTC (permalink / raw)
To: Hans Hagen; +Cc: mailing list for ConTeXt users
Thanks again!
pstopdf is accomplishing what neither convert, nor ps2pdf, nor etc etc
was able to do
Thank you very much for the hint
Pau
2009/6/13 Hans Hagen <pragma@wxs.nl>:
> Pau wrote:
>>
>> Hello,
>>
>> thanks a _lot_
>>
>> Now I have converted all eps figures into pdf, but I am running yet
>> into another snag... the conversion seems to ruin the bounding box of
>> the eps figures, so that the pdf figures are taking a full a4 site;
>> when I then use them in the main tex file, they are filling a whole
>> page.
>>
>> Is there a way to define a bounding box in \externalfigure ? I have
>> checked in the wikipage and googled a bit, but since English is not my
>> mother tongue, I may very well have used a bad keyword.
>>
>> If not, can anybody point me to a way of modifying a pdf file to get
>> rid of all exterior white space around a figure? I can imagine you can
>> do this with adobe software, but I don't have that. Only unix.
>
> there is a pdtopdf script in the distribution (ruby script that needs gs)
> that can do it that way (by default it uses the boundingbox)
>
> Hans
>
>
> -----------------------------------------------------------------
> Hans Hagen | PRAGMA ADE
> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
> tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
> | www.pragma-pod.nl
> -----------------------------------------------------------------
>
--
Let there be peace on earth. And let it begin with misc
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: label, caption and eps in figures?
2009-06-13 13:09 ` Pau
@ 2009-06-24 11:25 ` Pau
2009-06-25 11:25 ` Pau
0 siblings, 1 reply; 13+ messages in thread
From: Pau @ 2009-06-24 11:25 UTC (permalink / raw)
To: Hans Hagen; +Cc: mailing list for ConTeXt users
Hello,
some weeks ago I asked how to have a caption under a figure. I got a
detailed answer:
\placefigure
[here] % location
[fig.MyCaption] % reference
{My Caption} % caption
{\externalfigure[MyFigure.eps][factor=broad]}
Now I am preparing a presentation and I would like to have a figure
with a caption below it but, of course, I would like not to have the
"Fig. 1" on it.
I have figured out how to remove the Fig. part of it:
\setuplabeltext[en][figure=]
in the preamble. But I am still getting the number in bold: "1.1" in
the caption. How could I remove it?
thanks a lot
Pau
2009/6/13 Pau <vim.unix@googlemail.com>:
> Thanks again!
>
> pstopdf is accomplishing what neither convert, nor ps2pdf, nor etc etc
> was able to do
>
> Thank you very much for the hint
>
> Pau
>
> 2009/6/13 Hans Hagen <pragma@wxs.nl>:
>> Pau wrote:
>>>
>>> Hello,
>>>
>>> thanks a _lot_
>>>
>>> Now I have converted all eps figures into pdf, but I am running yet
>>> into another snag... the conversion seems to ruin the bounding box of
>>> the eps figures, so that the pdf figures are taking a full a4 site;
>>> when I then use them in the main tex file, they are filling a whole
>>> page.
>>>
>>> Is there a way to define a bounding box in \externalfigure ? I have
>>> checked in the wikipage and googled a bit, but since English is not my
>>> mother tongue, I may very well have used a bad keyword.
>>>
>>> If not, can anybody point me to a way of modifying a pdf file to get
>>> rid of all exterior white space around a figure? I can imagine you can
>>> do this with adobe software, but I don't have that. Only unix.
>>
>> there is a pdtopdf script in the distribution (ruby script that needs gs)
>> that can do it that way (by default it uses the boundingbox)
>>
>> Hans
>>
>>
>> -----------------------------------------------------------------
>> Hans Hagen | PRAGMA ADE
>> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
>> tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
>> | www.pragma-pod.nl
>> -----------------------------------------------------------------
>>
>
>
>
> --
> Let there be peace on earth. And let it begin with misc
>
--
Let there be peace on earth. And let it begin with misc
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: label, caption and eps in figures?
2009-06-24 11:25 ` Pau
@ 2009-06-25 11:25 ` Pau
2009-06-25 14:19 ` Willi Egger
0 siblings, 1 reply; 13+ messages in thread
From: Pau @ 2009-06-25 11:25 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hello,
was this question too silly, or did it just fall in a bottomless pit?
thanks in any case
Pau
2009/6/24 Pau <vim.unix@googlemail.com>:
> Hello,
>
> some weeks ago I asked how to have a caption under a figure. I got a
> detailed answer:
>
>
> \placefigure
> [here] % location
> [fig.MyCaption] % reference
> {My Caption} % caption
> {\externalfigure[MyFigure.eps][factor=broad]}
>
> Now I am preparing a presentation and I would like to have a figure
> with a caption below it but, of course, I would like not to have the
> "Fig. 1" on it.
>
> I have figured out how to remove the Fig. part of it:
>
> \setuplabeltext[en][figure=]
>
> in the preamble. But I am still getting the number in bold: "1.1" in
> the caption. How could I remove it?
>
> thanks a lot
>
> Pau
>
>
> 2009/6/13 Pau <vim.unix@googlemail.com>:
>> Thanks again!
>>
>> pstopdf is accomplishing what neither convert, nor ps2pdf, nor etc etc
>> was able to do
>>
>> Thank you very much for the hint
>>
>> Pau
>>
>> 2009/6/13 Hans Hagen <pragma@wxs.nl>:
>>> Pau wrote:
>>>>
>>>> Hello,
>>>>
>>>> thanks a _lot_
>>>>
>>>> Now I have converted all eps figures into pdf, but I am running yet
>>>> into another snag... the conversion seems to ruin the bounding box of
>>>> the eps figures, so that the pdf figures are taking a full a4 site;
>>>> when I then use them in the main tex file, they are filling a whole
>>>> page.
>>>>
>>>> Is there a way to define a bounding box in \externalfigure ? I have
>>>> checked in the wikipage and googled a bit, but since English is not my
>>>> mother tongue, I may very well have used a bad keyword.
>>>>
>>>> If not, can anybody point me to a way of modifying a pdf file to get
>>>> rid of all exterior white space around a figure? I can imagine you can
>>>> do this with adobe software, but I don't have that. Only unix.
>>>
>>> there is a pdtopdf script in the distribution (ruby script that needs gs)
>>> that can do it that way (by default it uses the boundingbox)
>>>
>>> Hans
>>>
>>>
>>> -----------------------------------------------------------------
>>> Hans Hagen | PRAGMA ADE
>>> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
>>> tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
>>> | www.pragma-pod.nl
>>> -----------------------------------------------------------------
>>>
>>
>>
>>
>> --
>> Let there be peace on earth. And let it begin with misc
>>
>
>
>
> --
> Let there be peace on earth. And let it begin with misc
>
--
Let there be peace on earth. And let it begin with misc
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: label, caption and eps in figures?
2009-06-25 11:25 ` Pau
@ 2009-06-25 14:19 ` Willi Egger
2009-06-25 15:06 ` Pau
0 siblings, 1 reply; 13+ messages in thread
From: Willi Egger @ 2009-06-25 14:19 UTC (permalink / raw)
To: vim.unix, mailing list for ConTeXt users
You mean no caption at all:
\placefigure
[here,none]
[]fig:foto]
{}
{\externalfigure...}
Willi
On Jun 25, 2009, at 1:25 PM, Pau wrote:
> Hello,
>
> was this question too silly, or did it just fall in a bottomless pit?
>
> thanks in any case
>
> Pau
>
> 2009/6/24 Pau <vim.unix@googlemail.com>:
>> Hello,
>>
>> some weeks ago I asked how to have a caption under a figure. I got a
>> detailed answer:
>>
>>
>> \placefigure
>> [here] % location
>> [fig.MyCaption] % reference
>> {My Caption} % caption
>> {\externalfigure[MyFigure.eps][factor=broad]}
>>
>> Now I am preparing a presentation and I would like to have a figure
>> with a caption below it but, of course, I would like not to have the
>> "Fig. 1" on it.
>>
>> I have figured out how to remove the Fig. part of it:
>>
>> \setuplabeltext[en][figure=]
>>
>> in the preamble. But I am still getting the number in bold: "1.1" in
>> the caption. How could I remove it?
>>
>> thanks a lot
>>
>> Pau
>>
>>
>> 2009/6/13 Pau <vim.unix@googlemail.com>:
>>> Thanks again!
>>>
>>> pstopdf is accomplishing what neither convert, nor ps2pdf, nor
>>> etc etc
>>> was able to do
>>>
>>> Thank you very much for the hint
>>>
>>> Pau
>>>
>>> 2009/6/13 Hans Hagen <pragma@wxs.nl>:
>>>> Pau wrote:
>>>>>
>>>>> Hello,
>>>>>
>>>>> thanks a _lot_
>>>>>
>>>>> Now I have converted all eps figures into pdf, but I am running
>>>>> yet
>>>>> into another snag... the conversion seems to ruin the bounding
>>>>> box of
>>>>> the eps figures, so that the pdf figures are taking a full a4
>>>>> site;
>>>>> when I then use them in the main tex file, they are filling a
>>>>> whole
>>>>> page.
>>>>>
>>>>> Is there a way to define a bounding box in \externalfigure ? I
>>>>> have
>>>>> checked in the wikipage and googled a bit, but since English is
>>>>> not my
>>>>> mother tongue, I may very well have used a bad keyword.
>>>>>
>>>>> If not, can anybody point me to a way of modifying a pdf file
>>>>> to get
>>>>> rid of all exterior white space around a figure? I can imagine
>>>>> you can
>>>>> do this with adobe software, but I don't have that. Only unix.
>>>>
>>>> there is a pdtopdf script in the distribution (ruby script that
>>>> needs gs)
>>>> that can do it that way (by default it uses the boundingbox)
>>>>
>>>> Hans
>>>>
>>>>
>>>> -----------------------------------------------------------------
>>>> Hans Hagen | PRAGMA ADE
>>>> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
>>>> tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
>>>> | www.pragma-pod.nl
>>>> -----------------------------------------------------------------
>>>>
>>>
>>>
>>>
>>> --
>>> Let there be peace on earth. And let it begin with misc
>>>
>>
>>
>>
>> --
>> Let there be peace on earth. And let it begin with misc
>>
>
>
>
> --
> Let there be peace on earth. And let it begin with misc
> ______________________________________________________________________
> _____________
> If your question is of interest to others as well, please add an
> entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/
> ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : https://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ______________________________________________________________________
> _____________
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: label, caption and eps in figures?
2009-06-25 14:19 ` Willi Egger
@ 2009-06-25 15:06 ` Pau
2009-06-26 6:33 ` Willi Egger
0 siblings, 1 reply; 13+ messages in thread
From: Pau @ 2009-06-25 15:06 UTC (permalink / raw)
To: Willi Egger; +Cc: mailing list for ConTeXt users
hello,
No, sorry, probably I was obscure and explained bad
I want the caption but neither "Fig" nor the number of the figure
I want a text below the figure without Fig.1 on it
thanks
2009/6/25 Willi Egger <w.egger@boede.nl>:
> You mean no caption at all:
>
> \placefigure
> [here,none]
> []fig:foto]
> {}
> {\externalfigure...}
>
> Willi
> On Jun 25, 2009, at 1:25 PM, Pau wrote:
>
>> Hello,
>>
>> was this question too silly, or did it just fall in a bottomless pit?
>>
>> thanks in any case
>>
>> Pau
>>
>> 2009/6/24 Pau <vim.unix@googlemail.com>:
>>>
>>> Hello,
>>>
>>> some weeks ago I asked how to have a caption under a figure. I got a
>>> detailed answer:
>>>
>>>
>>> \placefigure
>>> [here] % location
>>> [fig.MyCaption] % reference
>>> {My Caption} % caption
>>> {\externalfigure[MyFigure.eps][factor=broad]}
>>>
>>> Now I am preparing a presentation and I would like to have a figure
>>> with a caption below it but, of course, I would like not to have the
>>> "Fig. 1" on it.
>>>
>>> I have figured out how to remove the Fig. part of it:
>>>
>>> \setuplabeltext[en][figure=]
>>>
>>> in the preamble. But I am still getting the number in bold: "1.1" in
>>> the caption. How could I remove it?
>>>
>>> thanks a lot
>>>
>>> Pau
>>>
>>>
>>> 2009/6/13 Pau <vim.unix@googlemail.com>:
>>>>
>>>> Thanks again!
>>>>
>>>> pstopdf is accomplishing what neither convert, nor ps2pdf, nor etc etc
>>>> was able to do
>>>>
>>>> Thank you very much for the hint
>>>>
>>>> Pau
>>>>
>>>> 2009/6/13 Hans Hagen <pragma@wxs.nl>:
>>>>>
>>>>> Pau wrote:
>>>>>>
>>>>>> Hello,
>>>>>>
>>>>>> thanks a _lot_
>>>>>>
>>>>>> Now I have converted all eps figures into pdf, but I am running yet
>>>>>> into another snag... the conversion seems to ruin the bounding box of
>>>>>> the eps figures, so that the pdf figures are taking a full a4 site;
>>>>>> when I then use them in the main tex file, they are filling a whole
>>>>>> page.
>>>>>>
>>>>>> Is there a way to define a bounding box in \externalfigure ? I have
>>>>>> checked in the wikipage and googled a bit, but since English is not my
>>>>>> mother tongue, I may very well have used a bad keyword.
>>>>>>
>>>>>> If not, can anybody point me to a way of modifying a pdf file to get
>>>>>> rid of all exterior white space around a figure? I can imagine you can
>>>>>> do this with adobe software, but I don't have that. Only unix.
>>>>>
>>>>> there is a pdtopdf script in the distribution (ruby script that needs
>>>>> gs)
>>>>> that can do it that way (by default it uses the boundingbox)
>>>>>
>>>>> Hans
>>>>>
>>>>>
>>>>> -----------------------------------------------------------------
>>>>> Hans Hagen | PRAGMA ADE
>>>>> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
>>>>> tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
>>>>> | www.pragma-pod.nl
>>>>> -----------------------------------------------------------------
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Let there be peace on earth. And let it begin with misc
>>>>
>>>
>>>
>>>
>>> --
>>> Let there be peace on earth. And let it begin with misc
>>>
>>
>>
>>
>> --
>> Let there be peace on earth. And let it begin with misc
>>
>> ___________________________________________________________________________________
>> If your question is of interest to others as well, please add an entry to
>> the Wiki!
>>
>> maillist : ntg-context@ntg.nl /
>> http://www.ntg.nl/mailman/listinfo/ntg-context
>> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
>> archive : https://foundry.supelec.fr/projects/contextrev/
>> wiki : http://contextgarden.net
>>
>> ___________________________________________________________________________________
>
>
--
Let there be peace on earth. And let it begin with misc
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 13+ messages in thread
* Re: label, caption and eps in figures?
2009-06-25 15:06 ` Pau
@ 2009-06-26 6:33 ` Willi Egger
0 siblings, 0 replies; 13+ messages in thread
From: Willi Egger @ 2009-06-26 6:33 UTC (permalink / raw)
To: vim.unix, mailing list for ConTeXt users
This is then the approach
\setupcaptions[number=no]
\starttext
\placefigure
[here]
[fig:foto]
{Hacker}
{\externalfigure[hacker][width=5cm]}
\stoptext
Willi
On Jun 25, 2009, at 5:06 PM, Pau wrote:
> hello,
>
> No, sorry, probably I was obscure and explained bad
>
> I want the caption but neither "Fig" nor the number of the figure
>
> I want a text below the figure without Fig.1 on it
>
> thanks
>
> 2009/6/25 Willi Egger <w.egger@boede.nl>:
>> You mean no caption at all:
>>
>> \placefigure
>> [here,none]
>> []fig:foto]
>> {}
>> {\externalfigure...}
>>
>> Willi
>> On Jun 25, 2009, at 1:25 PM, Pau wrote:
>>
>>> Hello,
>>>
>>> was this question too silly, or did it just fall in a bottomless
>>> pit?
>>>
>>> thanks in any case
>>>
>>> Pau
>>>
>>> 2009/6/24 Pau <vim.unix@googlemail.com>:
>>>>
>>>> Hello,
>>>>
>>>> some weeks ago I asked how to have a caption under a figure. I
>>>> got a
>>>> detailed answer:
>>>>
>>>>
>>>> \placefigure
>>>> [here] % location
>>>> [fig.MyCaption] % reference
>>>> {My Caption} % caption
>>>> {\externalfigure[MyFigure.eps][factor=broad]}
>>>>
>>>> Now I am preparing a presentation and I would like to have a figure
>>>> with a caption below it but, of course, I would like not to have
>>>> the
>>>> "Fig. 1" on it.
>>>>
>>>> I have figured out how to remove the Fig. part of it:
>>>>
>>>> \setuplabeltext[en][figure=]
>>>>
>>>> in the preamble. But I am still getting the number in bold:
>>>> "1.1" in
>>>> the caption. How could I remove it?
>>>>
>>>> thanks a lot
>>>>
>>>> Pau
>>>>
>>>>
>>>> 2009/6/13 Pau <vim.unix@googlemail.com>:
>>>>>
>>>>> Thanks again!
>>>>>
>>>>> pstopdf is accomplishing what neither convert, nor ps2pdf, nor
>>>>> etc etc
>>>>> was able to do
>>>>>
>>>>> Thank you very much for the hint
>>>>>
>>>>> Pau
>>>>>
>>>>> 2009/6/13 Hans Hagen <pragma@wxs.nl>:
>>>>>>
>>>>>> Pau wrote:
>>>>>>>
>>>>>>> Hello,
>>>>>>>
>>>>>>> thanks a _lot_
>>>>>>>
>>>>>>> Now I have converted all eps figures into pdf, but I am
>>>>>>> running yet
>>>>>>> into another snag... the conversion seems to ruin the
>>>>>>> bounding box of
>>>>>>> the eps figures, so that the pdf figures are taking a full a4
>>>>>>> site;
>>>>>>> when I then use them in the main tex file, they are filling a
>>>>>>> whole
>>>>>>> page.
>>>>>>>
>>>>>>> Is there a way to define a bounding box in \externalfigure ?
>>>>>>> I have
>>>>>>> checked in the wikipage and googled a bit, but since English
>>>>>>> is not my
>>>>>>> mother tongue, I may very well have used a bad keyword.
>>>>>>>
>>>>>>> If not, can anybody point me to a way of modifying a pdf file
>>>>>>> to get
>>>>>>> rid of all exterior white space around a figure? I can
>>>>>>> imagine you can
>>>>>>> do this with adobe software, but I don't have that. Only unix.
>>>>>>
>>>>>> there is a pdtopdf script in the distribution (ruby script
>>>>>> that needs
>>>>>> gs)
>>>>>> that can do it that way (by default it uses the boundingbox)
>>>>>>
>>>>>> Hans
>>>>>>
>>>>>>
>>>>>> -----------------------------------------------------------------
>>>>>> Hans Hagen | PRAGMA ADE
>>>>>> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
>>>>>> tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
>>>>>> | www.pragma-pod.nl
>>>>>> -----------------------------------------------------------------
>>>>>>
>>>>>
>>>>>
>>>>>
>>>>> --
>>>>> Let there be peace on earth. And let it begin with misc
>>>>>
>>>>
>>>>
>>>>
>>>> --
>>>> Let there be peace on earth. And let it begin with misc
>>>>
>>>
>>>
>>>
>>> --
>>> Let there be peace on earth. And let it begin with misc
>>>
>>> ____________________________________________________________________
>>> _______________
>>> If your question is of interest to others as well, please add an
>>> entry to
>>> the Wiki!
>>>
>>> maillist : ntg-context@ntg.nl /
>>> http://www.ntg.nl/mailman/listinfo/ntg-context
>>> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
>>> archive : https://foundry.supelec.fr/projects/contextrev/
>>> wiki : http://contextgarden.net
>>>
>>> ____________________________________________________________________
>>> _______________
>>
>>
>
>
>
> --
> Let there be peace on earth. And let it begin with misc
> ______________________________________________________________________
> _____________
> If your question is of interest to others as well, please add an
> entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/
> ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : https://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ______________________________________________________________________
> _____________
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 13+ messages in thread
end of thread, other threads:[~2009-06-26 6:33 UTC | newest]
Thread overview: 13+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2009-06-12 15:43 label, caption and eps in figures? Pau
2009-06-12 15:56 ` Hans Hagen
[not found] ` <6faad9f00906120859q1d7692aesc4bf1456c5a90405@mail.gmail.com>
2009-06-12 20:40 ` Pau
2009-06-12 21:33 ` Hans Hagen
2009-06-13 12:15 ` Pau
2009-06-13 12:21 ` Wolfgang Schuster
2009-06-13 12:24 ` Hans Hagen
2009-06-13 13:09 ` Pau
2009-06-24 11:25 ` Pau
2009-06-25 11:25 ` Pau
2009-06-25 14:19 ` Willi Egger
2009-06-25 15:06 ` Pau
2009-06-26 6:33 ` Willi Egger
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).