* Re: How to get default Dutch language Context in TeXShop on Macos X
2004-12-16 21:22 How to get default Dutch language Context in TeXShop on Macos X Robert Kroon
@ 2004-12-16 21:03 ` Thomas A.Schmitz
2004-12-17 9:18 ` Hans Hagen
1 sibling, 0 replies; 6+ messages in thread
From: Thomas A.Schmitz @ 2004-12-16 21:03 UTC (permalink / raw)
You will probably have to use the Terminal, but it's a less horrible
place than you think. Gerben's TeX-installation expects to find .fmt
files in this location:
/usr/local/teTeX/share/texmf.local/web2c/cont-nl.fmt So what you do is:
cd /usr/local/teTeX/share/texmf.local/web2c
sudo texexec --make nl
give your password, texexec will automagically run texhash for you.
That should be all.
If you want to see if it works, look at the output of
texexec --version
which is, on my box:
TeXExec 5.2.3 - ConTeXt / PRAGMA ADE 1997-2004
texexec : TeXExec 5.2.3 - ConTeXt / PRAGMA ADE 1997-2004
texutil : TeXUtil 9.0.0 - ConTeXt / PRAGMA ADE 1992-2004
tex : pdfeTeX, 3.141592-1.20a-2.2 (Web2C 7.5.3)
context : ver: 2004.12.06
cont-en : ver: 2004.12.06 fmt: 2004.12.8 mes: english
cont-de : ver: 2004.12.06 fmt: 2004.12.8 mes: german
cont-nl : ver: 2004.12.06 fmt: 2004.12.8 mes: dutch
total run time : 2 seconds
HTH
Thomas
On Dec 16, 2004, at 10:22 PM, Robert Kroon wrote:
> Hi,
>
> Recently I've installed Gerben Wierda's teTeX distributon incl. ConTeXt
> on my iMac (Macos X, 10.3.6). Now I'm trying to learn ConTeXt. I'm
> marking up my documents in TeXShop, version 1.34.
> I can typeset small ConTeXt documents and generate PDF-files as long as
> the type setting commands are in English. However, I would like to use
> Dutch type setting commands like:
>
> \starttekst
> Dit is een test
> \stoptekst
>
> When I typeset this file from within TexShop I get following output and
> errors
>
> <Begin screen message>
>
> TeXExec 5.2.3 - ConTeXt / PRAGMA ADE 1997-2004
>
> executable : pdfetex
> format : cont-nl
> inputfile : Context-les1
> output : pdftex
> interface : nl
> current mode : none
> TeX run : 1
>
> This is pdfeTeX, Version 3.141592-1.20a-2.2 (Web2C 7.5.3)
> (/usr/local/teTeX/share/texmf.local/web2c/natural.tcx)
> kpathsea: Running mktexfmt cont-nl.fmt
> fmtutil: no info for format `cont-nl'.
> Sorry, I can't find the format `cont-nl.fmt'; will try `context.fmt'.
> kpathsea: Running mktexfmt context.fmt
> fmtutil: no info for format `context'.
> I can't find the format file `context.fmt'!
>
> return code : 256
> run time : 6 seconds
>
> total run time : 6 seconds
>
> <End screen message>
>
> First my interface was en (english). As can been seen in the listing my
> interface language is now nl . I changed this under my root account
> with
> the command texexec --make nl en
>
> My Texexec --verbose output under my user account is:
>
> <Begin terminal output>
> TeXExec 5.2.3 - ConTeXt / PRAGMA ADE 1997-2004
>
> current path : /Users/robert
> locating ini file : kpsewhiching texexec.ini on scripts
> locating ini file : kpsewhiching texexec.ini elsewhere
> locating ini file : found by kpsewhich
> reading :
> /usr/local/teTeX/share/texmf.tetex/context/config/texexec.ini
> setting : 'TeXShell' to 'tetex' for 'all'
> setting : 'UseEnginePath' to 'false' for 'all'
> setting : 'UsedInterfaces' to 'nl en metafun mptopdf'
> for 'all'
> setting : 'UserInterface' to 'nl' for 'all'
> setting : 'TeXExecutable' to 'tex' for 'all'
> setting : 'MpExecutable' to 'mpost' for 'all'
> setting : 'MpToTeXExecutable' to 'mpto' for 'all'
> setting : 'DviToMpExecutable' to 'dvitomp' for 'all'
> setting : 'DviSpecialScript' to 'dvispec' for 'all'
> setting : 'MpFormat' to 'metafun' for 'all'
> setting : 'TeXFormatFlag' to '&' for 'all'
> setting : 'MpFormatFlag' to '&' for 'all'
> setting : 'TeXHashExecutable' to 'mktexlsr' for 'tetex'
> setting : 'TeXExecutable' to 'pdfetex' for 'tetex'
> setting : 'TeXVirginFlag' to '-ini' for 'tetex'
> setting : 'TeXPassString' to '-progname=context' for
> 'tetex'
> setting : 'TeXBatchFlag' to '-int=batchmode' for 'tetex'
> setting : 'TeXNonStopFlag' to '-int=nonstopmode' for
> 'tetex'
> setting : 'MpToTeXExecutable' to 'mpto' for 'tetex'
> setting : 'MpVirginFlag' to '-ini' for 'tetex'
> setting : 'MpPassString' to '-progname=mpost' for
> 'tetex'
> setting : 'MpBatchFlag' to '-int=batchmode' for 'tetex'
> setting : 'MpNonStopFlag' to '-int=nonstopmode' for
> 'tetex'
> setting : 'TeXVirginFlag' to '-ini
> -translate-file=natural.tcx' for 'tetex'
> setting : 'MpVirginFlag' to '-ini
> -translate-file=natural.tcx' for 'tetex'
> setting : 'TeXPassString' to '-progname=context
> -translate-file=natural.tcx' for 'tetex'
> setting : 'MpPassString' to '-progname=mpost
> -translate-file=natural.tcx' for 'tetex'
>
> used setting : TeXShell = tetex
> used setting : SetupPath =
> used setting : UserInterface = nl
> used setting : UsedInterfaces = nl en metafun mptopdf
> used setting : TeXFontsPath = .
> used setting : MpExecutable = mpost
> used setting : MpToTeXExecutable = mpto
> used setting : DviToMpExecutable = dvitomp
> used setting : TeXProgramPath =
> used setting : TeXFormatPath =
> used setting : ConTeXtPath =
> used setting : TeXScriptsPath =
> used setting : TeXHashExecutable = mktexlsr
> used setting : TeXExecutable = pdfetex
> used setting : TeXVirginFlag = -ini
> -translate-file=natural.tcx
> used setting : TeXBatchFlag = -int=batchmode
> used setting : TeXNonStopFlag = -int=nonstopmode
> used setting : MpBatchFlag = -int=batchmode
> used setting : MpNonStopFlag = -int=nonstopmode
> used setting : TeXPassString = -progname=context
> -translate-file=natural.tcx
> used setting : TeXFormatFlag = &
> used setting : MpFormatFlag = &
> used setting : MpVirginFlag = -ini
> -translate-file=natural.tcx
> used setting : MpPassString = -progname=mpost
> -translate-file=natural.tcx
> used setting : MpFormat = metafun
> used setting : MpFormatPath =
> used setting : UseEnginePath = 0
> used setting : FmtLanguage =
> used setting : FmtBodyFont =
> used setting : FmtResponse =
> used setting : TcXPath =
> used setting : SetFile =
>
> applications will use : /usr/local/teTeX/texmf.cnf
> generating format : not using fmtutil
>
> --help overview of all options and their values
> --help all all about all options
> --help short just the main options
> --help mode ... pdf all about a few options
> --help '*.pdf' all about options containing 'pdf'
>
> <end terminal output>
>
> I believe that I'm doing things terrible wrong and I'm not that much
> used to use the terminal (as root, administrator or user) in Macos X.
>
> Any tips how I can get my Dutch typesetting command from within
> TeXShop?
> Many thanks in advance.
>
> Robert
>
>
> --
> Robert Kroon E-mail: robert@kroontevelde.demon.nl
>
> **** RISC OS computers - designed to serve ****
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* How to get default Dutch language Context in TeXShop on Macos X
@ 2004-12-16 21:22 Robert Kroon
2004-12-16 21:03 ` Thomas A.Schmitz
2004-12-17 9:18 ` Hans Hagen
0 siblings, 2 replies; 6+ messages in thread
From: Robert Kroon @ 2004-12-16 21:22 UTC (permalink / raw)
Hi,
Recently I've installed Gerben Wierda's teTeX distributon incl. ConTeXt
on my iMac (Macos X, 10.3.6). Now I'm trying to learn ConTeXt. I'm
marking up my documents in TeXShop, version 1.34.
I can typeset small ConTeXt documents and generate PDF-files as long as
the type setting commands are in English. However, I would like to use
Dutch type setting commands like:
\starttekst
Dit is een test
\stoptekst
When I typeset this file from within TexShop I get following output and
errors
<Begin screen message>
TeXExec 5.2.3 - ConTeXt / PRAGMA ADE 1997-2004
executable : pdfetex
format : cont-nl
inputfile : Context-les1
output : pdftex
interface : nl
current mode : none
TeX run : 1
This is pdfeTeX, Version 3.141592-1.20a-2.2 (Web2C 7.5.3)
(/usr/local/teTeX/share/texmf.local/web2c/natural.tcx)
kpathsea: Running mktexfmt cont-nl.fmt
fmtutil: no info for format `cont-nl'.
Sorry, I can't find the format `cont-nl.fmt'; will try `context.fmt'.
kpathsea: Running mktexfmt context.fmt
fmtutil: no info for format `context'.
I can't find the format file `context.fmt'!
return code : 256
run time : 6 seconds
total run time : 6 seconds
<End screen message>
First my interface was en (english). As can been seen in the listing my
interface language is now nl . I changed this under my root account with
the command texexec --make nl en
My Texexec --verbose output under my user account is:
<Begin terminal output>
TeXExec 5.2.3 - ConTeXt / PRAGMA ADE 1997-2004
current path : /Users/robert
locating ini file : kpsewhiching texexec.ini on scripts
locating ini file : kpsewhiching texexec.ini elsewhere
locating ini file : found by kpsewhich
reading : /usr/local/teTeX/share/texmf.tetex/context/config/texexec.ini
setting : 'TeXShell' to 'tetex' for 'all'
setting : 'UseEnginePath' to 'false' for 'all'
setting : 'UsedInterfaces' to 'nl en metafun mptopdf' for 'all'
setting : 'UserInterface' to 'nl' for 'all'
setting : 'TeXExecutable' to 'tex' for 'all'
setting : 'MpExecutable' to 'mpost' for 'all'
setting : 'MpToTeXExecutable' to 'mpto' for 'all'
setting : 'DviToMpExecutable' to 'dvitomp' for 'all'
setting : 'DviSpecialScript' to 'dvispec' for 'all'
setting : 'MpFormat' to 'metafun' for 'all'
setting : 'TeXFormatFlag' to '&' for 'all'
setting : 'MpFormatFlag' to '&' for 'all'
setting : 'TeXHashExecutable' to 'mktexlsr' for 'tetex'
setting : 'TeXExecutable' to 'pdfetex' for 'tetex'
setting : 'TeXVirginFlag' to '-ini' for 'tetex'
setting : 'TeXPassString' to '-progname=context' for 'tetex'
setting : 'TeXBatchFlag' to '-int=batchmode' for 'tetex'
setting : 'TeXNonStopFlag' to '-int=nonstopmode' for 'tetex'
setting : 'MpToTeXExecutable' to 'mpto' for 'tetex'
setting : 'MpVirginFlag' to '-ini' for 'tetex'
setting : 'MpPassString' to '-progname=mpost' for 'tetex'
setting : 'MpBatchFlag' to '-int=batchmode' for 'tetex'
setting : 'MpNonStopFlag' to '-int=nonstopmode' for 'tetex'
setting : 'TeXVirginFlag' to '-ini -translate-file=natural.tcx' for 'tetex'
setting : 'MpVirginFlag' to '-ini -translate-file=natural.tcx' for 'tetex'
setting : 'TeXPassString' to '-progname=context -translate-file=natural.tcx' for 'tetex'
setting : 'MpPassString' to '-progname=mpost -translate-file=natural.tcx' for 'tetex'
used setting : TeXShell = tetex
used setting : SetupPath =
used setting : UserInterface = nl
used setting : UsedInterfaces = nl en metafun mptopdf
used setting : TeXFontsPath = .
used setting : MpExecutable = mpost
used setting : MpToTeXExecutable = mpto
used setting : DviToMpExecutable = dvitomp
used setting : TeXProgramPath =
used setting : TeXFormatPath =
used setting : ConTeXtPath =
used setting : TeXScriptsPath =
used setting : TeXHashExecutable = mktexlsr
used setting : TeXExecutable = pdfetex
used setting : TeXVirginFlag = -ini -translate-file=natural.tcx
used setting : TeXBatchFlag = -int=batchmode
used setting : TeXNonStopFlag = -int=nonstopmode
used setting : MpBatchFlag = -int=batchmode
used setting : MpNonStopFlag = -int=nonstopmode
used setting : TeXPassString = -progname=context -translate-file=natural.tcx
used setting : TeXFormatFlag = &
used setting : MpFormatFlag = &
used setting : MpVirginFlag = -ini -translate-file=natural.tcx
used setting : MpPassString = -progname=mpost -translate-file=natural.tcx
used setting : MpFormat = metafun
used setting : MpFormatPath =
used setting : UseEnginePath = 0
used setting : FmtLanguage =
used setting : FmtBodyFont =
used setting : FmtResponse =
used setting : TcXPath =
used setting : SetFile =
applications will use : /usr/local/teTeX/texmf.cnf
generating format : not using fmtutil
--help overview of all options and their values
--help all all about all options
--help short just the main options
--help mode ... pdf all about a few options
--help '*.pdf' all about options containing 'pdf'
<end terminal output>
I believe that I'm doing things terrible wrong and I'm not that much
used to use the terminal (as root, administrator or user) in Macos X.
Any tips how I can get my Dutch typesetting command from within TeXShop?
Many thanks in advance.
Robert
--
Robert Kroon E-mail: robert@kroontevelde.demon.nl
**** RISC OS computers - designed to serve ****
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: How to get default Dutch language Context in TeXShop on Macos X
2004-12-16 21:22 How to get default Dutch language Context in TeXShop on Macos X Robert Kroon
2004-12-16 21:03 ` Thomas A.Schmitz
@ 2004-12-17 9:18 ` Hans Hagen
2004-12-17 9:28 ` Gerben Wierda
1 sibling, 1 reply; 6+ messages in thread
From: Hans Hagen @ 2004-12-17 9:18 UTC (permalink / raw)
Robert Kroon wrote:
> Recently I've installed Gerben Wierda's teTeX distributon incl. ConTeXt
> on my iMac (Macos X, 10.3.6). Now I'm trying to learn ConTeXt. I'm
> marking up my documents in TeXShop, version 1.34.
> I can typeset small ConTeXt documents and generate PDF-files as long as
> the type setting commands are in English. However, I would like to use
> Dutch type setting commands like:
>
> \starttekst
> Dit is een test
> \stoptekst
> Any tips how I can get my Dutch typesetting command from within TeXShop?
> Many thanks in advance.
i think that gerben know the answer
(texexec --make --all or specific texexec --make --all en nl metafun mptopdf)
gerben: it makes sense to generate the dutch format as well because some goodies
use the dutch format
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: How to get default Dutch language Context in TeXShop on Macos X
2004-12-17 9:18 ` Hans Hagen
@ 2004-12-17 9:28 ` Gerben Wierda
2004-12-19 17:16 ` Robert Kroon
0 siblings, 1 reply; 6+ messages in thread
From: Gerben Wierda @ 2004-12-17 9:28 UTC (permalink / raw)
Cc: mailing list for ConTeXt users
On Dec 17, 2004, at 10:18, Hans Hagen wrote:
> Robert Kroon wrote:
>
>> Recently I've installed Gerben Wierda's teTeX distributon incl.
>> ConTeXt
>> on my iMac (Macos X, 10.3.6). Now I'm trying to learn ConTeXt. I'm
>> marking up my documents in TeXShop, version 1.34.
>> I can typeset small ConTeXt documents and generate PDF-files as long
>> as
>> the type setting commands are in English. However, I would like to use
>> Dutch type setting commands like:
>> \starttekst
>> Dit is een test
>> \stoptekst
>
>> Any tips how I can get my Dutch typesetting command from within
>> TeXShop?
>> Many thanks in advance.
>
> i think that gerben know the answer
I have no idea how to configure TeXShop for specific ConTeXt versions.
I woul dlook at the current way it calls context and change cont-en
into cont-nl.
The i-Package provides a way to choose the cont-nl format to be
available during the formats selection phase. Re-run configuratio if
you do not want to use the commad line.
> (texexec --make --all or specific texexec --make --all en nl metafun
> mptopdf)
>
> gerben: it makes sense to generate the dutch format as well because
> some goodies use the dutch format
>
> Hans
>
>
>
>
>
>
> -----------------------------------------------------------------
> Hans Hagen | PRAGMA ADE
> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
> tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
> | www.pragma-pod.nl
> -----------------------------------------------------------------
>
>
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: How to get default Dutch language Context in TeXShop on Macos X
2004-12-17 9:28 ` Gerben Wierda
@ 2004-12-19 17:16 ` Robert Kroon
0 siblings, 0 replies; 6+ messages in thread
From: Robert Kroon @ 2004-12-19 17:16 UTC (permalink / raw)
In message <F320CAA3-500D-11D9-BDE5-003065B3343E@rna.nl>
Gerben Wierda <Gerben.Wierda@rna.nl> wrote:
> On Dec 17, 2004, at 10:18, Hans Hagen wrote:
>
> > Robert Kroon wrote:
> >
> >> Recently I've installed Gerben Wierda's teTeX distributon incl.
> >> ConTeXt
> >> on my iMac (Macos X, 10.3.6). Now I'm trying to learn ConTeXt. I'm
> >> marking up my documents in TeXShop, version 1.34.
> >> I can typeset small ConTeXt documents and generate PDF-files as long
> >> as
> >> the type setting commands are in English. However, I would like to use
> >> Dutch type setting commands like:
> >> \starttekst
> >> Dit is een test
> >> \stoptekst
> >
> >> Any tips how I can get my Dutch typesetting command from within
> >> TeXShop?
> >> Many thanks in advance.
> >
> > i think that gerben know the answer
>
> I have no idea how to configure TeXShop for specific ConTeXt versions.
> I woul dlook at the current way it calls context and change cont-en
> into cont-nl.
>
> The i-Package provides a way to choose the cont-nl format to be
> available during the formats selection phase. Re-run configuratio if
> you do not want to use the commad line.
>
> > (texexec --make --all or specific texexec --make --all en nl metafun
> > mptopdf)
> >
> > gerben: it makes sense to generate the dutch format as well because
> > some goodies use the dutch format
> >
> > Hans
> >
> >
[Snip]
It's working now. As root I ran texexec --make --all
Following Thomas A. Schmitz posting I checked if the file cont-nl.fmt
was in /usr/local/teTeX/share/texmf.local/web2c. This was not the case.
Instead the generated file cont-nl-fmt was located in
/Users/myadministratorname. What I did was copying the file to
/usr/local/teTeX/share/texmf.local/web2c and now it works.
Thank you all very much for your help.
Robert
--
Robert Kroon E-mail: robert@kroontevelde.demon.nl
**** RISC OS computers - designed to serve ****
^ permalink raw reply [flat|nested] 6+ messages in thread
* How to get default Dutch language Context in TeXShop on Macos X
@ 2004-12-16 21:19 Robert Kroon
0 siblings, 0 replies; 6+ messages in thread
From: Robert Kroon @ 2004-12-16 21:19 UTC (permalink / raw)
Hi,
Recently I've installed Gerben Wierda's teTeX distributon incl. ConTeXt
on my iMac (Macos X, 10.3.6). Now I'm trying to learn ConTeXt. I'm
marking up my documents in TeXShop, version 1.34.
I can typeset small ConTeXt documents and generate PDF-files as long as
the type setting commands are in English. However, I would like to use
Dutch type setting commands like:
\starttekst
Dit is een test
\stoptekst
When I typeset this file from within TexShop I get following output and
errors
<Begin screen message>
TeXExec 5.2.3 - ConTeXt / PRAGMA ADE 1997-2004
executable : pdfetex
format : cont-nl
inputfile : Context-les1
output : pdftex
interface : nl
current mode : none
TeX run : 1
This is pdfeTeX, Version 3.141592-1.20a-2.2 (Web2C 7.5.3)
(/usr/local/teTeX/share/texmf.local/web2c/natural.tcx)
kpathsea: Running mktexfmt cont-nl.fmt
fmtutil: no info for format `cont-nl'.
Sorry, I can't find the format `cont-nl.fmt'; will try `context.fmt'.
kpathsea: Running mktexfmt context.fmt
fmtutil: no info for format `context'.
I can't find the format file `context.fmt'!
return code : 256
run time : 6 seconds
total run time : 6 seconds
<End screen message>
First my interface was en (english). As can been seen in the listing my
interface language is now nl . I changed this under my root account with
the command texexec --make nl en
My Texexec --verbose output under my user account is:
<Begin terminal output>
TeXExec 5.2.3 - ConTeXt / PRAGMA ADE 1997-2004
current path : /Users/robert
locating ini file : kpsewhiching texexec.ini on scripts
locating ini file : kpsewhiching texexec.ini elsewhere
locating ini file : found by kpsewhich
reading : /usr/local/teTeX/share/texmf.tetex/context/config/texexec.ini
setting : 'TeXShell' to 'tetex' for 'all'
setting : 'UseEnginePath' to 'false' for 'all'
setting : 'UsedInterfaces' to 'nl en metafun mptopdf' for 'all'
setting : 'UserInterface' to 'nl' for 'all'
setting : 'TeXExecutable' to 'tex' for 'all'
setting : 'MpExecutable' to 'mpost' for 'all'
setting : 'MpToTeXExecutable' to 'mpto' for 'all'
setting : 'DviToMpExecutable' to 'dvitomp' for 'all'
setting : 'DviSpecialScript' to 'dvispec' for 'all'
setting : 'MpFormat' to 'metafun' for 'all'
setting : 'TeXFormatFlag' to '&' for 'all'
setting : 'MpFormatFlag' to '&' for 'all'
setting : 'TeXHashExecutable' to 'mktexlsr' for 'tetex'
setting : 'TeXExecutable' to 'pdfetex' for 'tetex'
setting : 'TeXVirginFlag' to '-ini' for 'tetex'
setting : 'TeXPassString' to '-progname=context' for 'tetex'
setting : 'TeXBatchFlag' to '-int=batchmode' for 'tetex'
setting : 'TeXNonStopFlag' to '-int=nonstopmode' for 'tetex'
setting : 'MpToTeXExecutable' to 'mpto' for 'tetex'
setting : 'MpVirginFlag' to '-ini' for 'tetex'
setting : 'MpPassString' to '-progname=mpost' for 'tetex'
setting : 'MpBatchFlag' to '-int=batchmode' for 'tetex'
setting : 'MpNonStopFlag' to '-int=nonstopmode' for 'tetex'
setting : 'TeXVirginFlag' to '-ini -translate-file=natural.tcx' for 'tetex'
setting : 'MpVirginFlag' to '-ini -translate-file=natural.tcx' for 'tetex'
setting : 'TeXPassString' to '-progname=context -translate-file=natural.tcx' for 'tetex'
setting : 'MpPassString' to '-progname=mpost -translate-file=natural.tcx' for 'tetex'
used setting : TeXShell = tetex
used setting : SetupPath =
used setting : UserInterface = nl
used setting : UsedInterfaces = nl en metafun mptopdf
used setting : TeXFontsPath = .
used setting : MpExecutable = mpost
used setting : MpToTeXExecutable = mpto
used setting : DviToMpExecutable = dvitomp
used setting : TeXProgramPath =
used setting : TeXFormatPath =
used setting : ConTeXtPath =
used setting : TeXScriptsPath =
used setting : TeXHashExecutable = mktexlsr
used setting : TeXExecutable = pdfetex
used setting : TeXVirginFlag = -ini -translate-file=natural.tcx
used setting : TeXBatchFlag = -int=batchmode
used setting : TeXNonStopFlag = -int=nonstopmode
used setting : MpBatchFlag = -int=batchmode
used setting : MpNonStopFlag = -int=nonstopmode
used setting : TeXPassString = -progname=context -translate-file=natural.tcx
used setting : TeXFormatFlag = &
used setting : MpFormatFlag = &
used setting : MpVirginFlag = -ini -translate-file=natural.tcx
used setting : MpPassString = -progname=mpost -translate-file=natural.tcx
used setting : MpFormat = metafun
used setting : MpFormatPath =
used setting : UseEnginePath = 0
used setting : FmtLanguage =
used setting : FmtBodyFont =
used setting : FmtResponse =
used setting : TcXPath =
used setting : SetFile =
applications will use : /usr/local/teTeX/texmf.cnf
generating format : not using fmtutil
--help overview of all options and their values
--help all all about all options
--help short just the main options
--help mode ... pdf all about a few options
--help '*.pdf' all about options containing 'pdf'
<end terminal output>
I believe that I'm doing things terrible wrong and I'm not that much
used to use the terminal (as root, administrator or user) in Macos X.
Any tips how I can get my Dutch typesetting command from within TeXShop?
Many thanks in advance.
Robert
--
Robert Kroon E-mail: robert@kroontevelde.demon.nl
**** RISC OS computers - designed to serve ****
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2004-12-19 17:16 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-12-16 21:22 How to get default Dutch language Context in TeXShop on Macos X Robert Kroon
2004-12-16 21:03 ` Thomas A.Schmitz
2004-12-17 9:18 ` Hans Hagen
2004-12-17 9:28 ` Gerben Wierda
2004-12-19 17:16 ` Robert Kroon
-- strict thread matches above, loose matches on Subject: below --
2004-12-16 21:19 Robert Kroon
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).