* \executesystemcommand dont work? @ 2015-02-17 7:04 Akira Kakuto 2015-02-17 8:55 ` Jaroslav Hajtmar 0 siblings, 1 reply; 21+ messages in thread From: Akira Kakuto @ 2015-02-17 7:04 UTC (permalink / raw) To: ntg-context Dear Jaroslav, Here your lines fonts > 'fallback modern-designsize rm 12pt' is loaded test > before calling shell command test > after calling shell command close source > 2 > 3 > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancs... are like fonts > 'fallback modern-designsize rm 12pt' is loaded "OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO" close source > 2 > 3 > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancs... (Windows 7, 32bit and Windows 8.1, 64bit) (mtx-context | current version: 2015.02.03 23:55) Thanks, Akira ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: \executesystemcommand dont work? 2015-02-17 7:04 \executesystemcommand dont work? Akira Kakuto @ 2015-02-17 8:55 ` Jaroslav Hajtmar 2015-02-17 10:29 ` Ulrike Fischer 0 siblings, 1 reply; 21+ messages in thread From: Jaroslav Hajtmar @ 2015-02-17 8:55 UTC (permalink / raw) To: ntg-context Thanx Akira for reply. Thanks to your answers I see that my console output differs from yours. At this moment, however, I do not know what happened to my windows respectively how to correct the mistake. Does anyone know how to fix it? I'm not ConTeXt expert and I'm not Windows expert too. Thanx Jaroslav Hajtmar Dne 17.2.2015 v 8:04 Akira Kakuto napsal(a): > Dear Jaroslav, > > Here your lines > > fonts > 'fallback modern-designsize rm 12pt' is loaded > test > before calling shell command > test > after calling shell command > close source > 2 > 3 > > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancs... > > are like > > fonts > 'fallback modern-designsize rm 12pt' is loaded > "OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO" > close source > 2 > 3 > > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancs... > > > (Windows 7, 32bit and Windows 8.1, 64bit) > (mtx-context | current version: 2015.02.03 23:55) > > Thanks, > Akira > > ___________________________________________________________________________________ > > If your question is of interest to others as well, please add an entry > to the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: \executesystemcommand dont work? 2015-02-17 8:55 ` Jaroslav Hajtmar @ 2015-02-17 10:29 ` Ulrike Fischer 2015-02-17 11:43 ` Jaroslav Hajtmar 0 siblings, 1 reply; 21+ messages in thread From: Ulrike Fischer @ 2015-02-17 10:29 UTC (permalink / raw) To: ntg-context Am Tue, 17 Feb 2015 09:55:58 +0100 schrieb Jaroslav Hajtmar: > Thanks to your answers I see that my console output differs from yours. > At this moment, however, I do not know what happened to my windows > respectively how to correct the mistake. Does anyone know how to fix it? > I'm not ConTeXt expert and I'm not Windows expert too. You said you had a texlive2014 too, so you could try --shell-escape with latex. This would it make easier to see if the problem is with windows or with context: \documentclass{article} \begin{document} \immediate\write18{echo "OOOOOOOOOOOOOOOOOOOOOOOO"} \end{document} run it with pdflatex --shell-escape and/or lualatex --shell-escape -- Ulrike Fischer http://www.troubleshooting-tex.de/ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: \executesystemcommand dont work? 2015-02-17 10:29 ` Ulrike Fischer @ 2015-02-17 11:43 ` Jaroslav Hajtmar 2015-02-17 21:10 ` Ulrike Fischer 0 siblings, 1 reply; 21+ messages in thread From: Jaroslav Hajtmar @ 2015-02-17 11:43 UTC (permalink / raw) To: ntg-context Thanx Ulrike for reply. I'm sending outputs from Pdflatex and lualatex consoles: I do not know what I should receive Jaroslav Hajtmar PDFLaTeX output console: Microsoft Windows [Verze 6.1.7601] Copyright (c) 2009 Microsoft Corporation. Všechna práva vyhrazena. C:\$~1da\ConTeXt\ConTeXt-Tests\my_way\ScanCSV\t-scancsv_ConTeXt_module\2PabloRod riguez5\ddd>pdflatex --shell-escape latex This is pdfTeX, Version 3.14159265-2.6-1.40.15 (TeX Live 2014/W32TeX) (preloaded format=pdflatex) \write18 enabled. entering extended mode (./latex.tex LaTeX2e <2014/05/01> Babel <3.9k> and hyphenation patterns for 79 languages loaded. (c:/texlive/2014/texmf-dist/tex/latex/base/article.cls Document Class: article 2007/10/19 v1.4h Standard LaTeX document class (c:/texlive/2014/texmf-dist/tex/latex/base/size10.clo)) No file latex.aux. (./latex.aux) ) No pages of output. Transcript written on latex.log. C:\$~1da\ConTeXt\ConTeXt-Tests\my_way\ScanCSV\t-scancsv_ConTeXt_module\2PabloRod riguez5\ddd> And LuaLaTeX output console: C:\$~1da\ConTeXt\ConTeXt-Tests\my_way\ScanCSV\t-scancsv_ConTeXt_module\2PabloRod riguez5\ddd>lualatex --shell-escape latex This is LuaTeX, Version beta-0.79.1 (TeX Live 2014/W32TeX) (rev 4971) \write18 enabled. (./latex.tex LaTeX2e <2014/05/01> Babel <3.9k> and hyphenation patterns for 79 languages loaded. (c:/texlive/2014/texmf-dist/tex/latex/base/article.cls Document Class: article 2007/10/19 v1.4h Standard LaTeX document class (c:/texlive/2014/texmf-dist/tex/latex/base/size10.clo)) (./latex.aux) (./latex.aux)) 262 words of node memory still in use: 2 hlist, 1 vlist, 1 rule, 2 glue, 39 glue_spec, 2 write nodes avail lists: 2:12,3:1,6:3,7:1,9:1 No pages of output. Transcript written on latex.log. C:\$~1da\ConTeXt\ConTeXt-Tests\my_way\ScanCSV\t-scancsv_ConTeXt_module\2PabloRod riguez5\ddd> Dne 17.2.2015 v 11:29 Ulrike Fischer napsal(a): > pdflatex --shell-escape ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: \executesystemcommand dont work? 2015-02-17 11:43 ` Jaroslav Hajtmar @ 2015-02-17 21:10 ` Ulrike Fischer 0 siblings, 0 replies; 21+ messages in thread From: Ulrike Fischer @ 2015-02-17 21:10 UTC (permalink / raw) To: ntg-context Am Tue, 17 Feb 2015 12:43:47 +0100 schrieb Jaroslav Hajtmar: > Thanx Ulrike for reply. > I'm sending outputs from Pdflatex and lualatex consoles: > I do not know what I should receive You should see (./test-utf8.aux)"OOOOOOOOOOOOOOOOOOOOOOOO" on the command line and runsystem(echo "OOOOOOOOOOOOOOOOOOOOOOOO")...executed. in the log. So the problem is not in context but in windows. I'm sure Akira is right: cmd.exe is not in the path. -- Ulrike Fischer http://www.troubleshooting-tex.de/ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 21+ messages in thread
* \executesystemcommand dont work? @ 2015-02-17 13:55 Akira Kakuto 0 siblings, 0 replies; 21+ messages in thread From: Akira Kakuto @ 2015-02-17 13:55 UTC (permalink / raw) To: ntg-context Dear Jaroslav, See your PATH carefully. For example I find a space between C:\1da\support\batch; and C:\Ruby\bin;C:\Windows\system32 i.e., C:\1da\support\batch; C:\Ruby\bin;C:\Windows\system32 There are many such spaces which should be removed. I think quotations such as "C:\Program Files (x86)\ghostgum\gsview" should be removed like C:\Program Files (x86)\ghostgum\gsview Best, Akira ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 21+ messages in thread
* \executesystemcommand dont work?
@ 2015-02-17 13:21 Akira Kakuto
0 siblings, 0 replies; 21+ messages in thread
From: Akira Kakuto @ 2015-02-17 13:21 UTC (permalink / raw)
To: ntg-context
Dear Jaroslav,
> I tested path settings, but it seems it is OK
> (c:\windows\system32 is in my PATH)
Sorry for my mistake.
Very difficult problem!!
% latex.tex
\documentclass{article}
\begin{document}
\immediate\write18{echo "OOOOOOOOOOOOOOOOOOOOOOOO"}
\end{document}
should print
... ...
No file latex.aux.
"OOOOOOOOOOOOOOOOOOOOOOOO"
(./latex.aux) )
No pages of output.
Transcript written on latex.log.
for
pdflatex --shell-escape latex
Best,
Akira
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 21+ messages in thread
* \executesystemcommand dont work?
@ 2015-02-17 12:21 Akira Kakuto
2015-02-17 12:58 ` Jaroslav Hajtmar
0 siblings, 1 reply; 21+ messages in thread
From: Akira Kakuto @ 2015-02-17 12:21 UTC (permalink / raw)
To: ntg-context
> No file latex.aux.
> (./latex.aux) )
> No pages of output.
OK, as I said previously, c:\windows\system32 does not
exist in your PATH.
In your command prompt
echo "000"
will work, but
cmd /c echo "000"
will not work.
Please test in your command prompt
set PATH=c:\windows\system32;%PATH%
pdflatex --shell-escape latex
It should work perfectly.
After that, repair the PATH variable,
by reading the manual of OS, if you don't understand.
Thanks,
Akira
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: \executesystemcommand dont work? 2015-02-17 12:21 Akira Kakuto @ 2015-02-17 12:58 ` Jaroslav Hajtmar 0 siblings, 0 replies; 21+ messages in thread From: Jaroslav Hajtmar @ 2015-02-17 12:58 UTC (permalink / raw) To: ntg-context Thanx Akira. I tested path settings, but it seems it is OK (c:\windows\system32 is in my PATH) I am sending full path variable. PATH=C:\ProgramData\Oracle\Java\javapath;C:\Program Files\ImageMagick-6.8.7-Q16; C:\Program Files (x86)\PC Connectivity Solution\;C:\texlive\2014\bin\win32;C:\Pe rl64\site\bin;C:\Perl64\bin;C:\1da\support\exe;C:\1da\support\batch; C:\Ruby\bin ;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem; C:\Windows\System32\Wi ndowsPowerShell\v1.0\;C:\Program Files\Dell\Dell Wireless WLAN Card;c:\Program F iles\WIDCOMM\Bluetooth Software\;c:\Program Files\WIDCOMM\Bluetooth Software\sys wow64;c:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Fil es (x86)\Common Files\Roxio Shared\DLLShared\;"c:\Program Files (x86)\pstoedit"; "C:\Program Files (x86) \gs\gs8.71\bin";"C:\Program Files (x86)\ghostgum\gsview" ;"C:\Program Files\Tracker Software\PDF Viewer\";C:\Program Files (x86)\Kofax\Im gCtls\bin; "C:\Program Files (x86)\SumatraPDF\SumatraPDF.exe";C:\Program Files ( x86) \PDFtk\bin\;C:\Program Files (x86)\Inkscape\;c:\ruby\bin;c:\context\bin; C: \Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86) \Common Files\Microsoft Shared\Windows Live;C:\texlive\support\exe\sw\wscite;C:\ Program Files\ImageMagick-6.6.4-Q16; C:\1da\support\exe; C:\Windows; "C:\Program Files (x86)\gs\gs8.71\bin";"C:\Program Files (x86) \ghostgum\gsview";C:\Program Files (x86)\Windows Live\Shared;"C:\Program Files (x86) \Inkscape\Inkscape.exe" Thanx for support. Jaroslav Hajtmar Dne 17.2.2015 v 13:21 Akira Kakuto napsal(a): >> No file latex.aux. >> (./latex.aux) ) >> No pages of output. > > OK, as I said previously, c:\windows\system32 does not > exist in your PATH. > > In your command prompt > echo "000" > will work, but > cmd /c echo "000" > will not work. > > Please test in your command prompt > > set PATH=c:\windows\system32;%PATH% > pdflatex --shell-escape latex > > It should work perfectly. > > After that, repair the PATH variable, > by reading the manual of OS, if you don't understand. > > Thanks, > Akira > > ___________________________________________________________________________________ > > If your question is of interest to others as well, please add an entry > to the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 21+ messages in thread
* \executesystemcommand dont work?
@ 2015-02-17 9:25 Akira Kakuto
0 siblings, 0 replies; 21+ messages in thread
From: Akira Kakuto @ 2015-02-17 9:25 UTC (permalink / raw)
To: ntg-context
Dear Jaroslav,
> Does anyone know how to fix it?
> I'm not ConTeXt expert and I'm not Windows expert too.
I don't know a reason, but ...
Very rare case:
c:\windows\system32
is erased from your PATH by an accident,
so cmd.exe cannot be found by luatex.
Please check the PATH variable on your system.
Thanks,
Akira
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 21+ messages in thread
* \executesystemcommand dont work? @ 2015-02-16 11:41 Jaroslav Hajtmar 2015-02-16 20:20 ` Pablo Rodriguez 2015-02-16 21:47 ` Aditya Mahajan 0 siblings, 2 replies; 21+ messages in thread From: Jaroslav Hajtmar @ 2015-02-16 11:41 UTC (permalink / raw) To: mailing list for ConTeXt users Hi ConTeXist. After a long time I tried to recompile ConTeXt file that contained the \executesystemcommand. It seems to me that this command stopped working. Can anyone confirm or refute this my perception? I call \executesystemcommand to compiling another ConTeXt file from running ConTeXt. I use Windows 7 and problem is under TeXlive 2014 version and Standalone version too. Thanx Jaroslav Hajtmar Here is my minimal example: When I compile maintestfile.tex, then I expect, that compilebyexecutesystemcommand.pdf is created during compilation of maintestfile.tex file. I have two files. First is "test.tex" name: \starttext \input tufte \stoptext And second is file maintestfile.tex: \starttext \executesystemcommand{context --result=compilebyexecutesystemcommand.pdf test.tex} \input knuth \stoptext ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: \executesystemcommand dont work? 2015-02-16 11:41 Jaroslav Hajtmar @ 2015-02-16 20:20 ` Pablo Rodriguez 2015-02-16 21:20 ` Jaroslav Hajtmar 2015-02-16 21:47 ` Aditya Mahajan 1 sibling, 1 reply; 21+ messages in thread From: Pablo Rodriguez @ 2015-02-16 20:20 UTC (permalink / raw) To: mailing list for ConTeXt users On 02/16/2015 12:41 PM, Jaroslav Hajtmar wrote: > Hi ConTeXist. > After a long time I tried to recompile ConTeXt file that contained the > \executesystemcommand. It seems to me that this command stopped working. > Can anyone confirm or refute this my perception? Hi Jaroslav, the sample you sent works fine for me. Both files get compiled. > I call \executesystemcommand to compiling another ConTeXt file from > running ConTeXt. I use Windows 7 and problem is under TeXlive 2014 > version and Standalone version too. I’m using latest beta in Fedora 20. At work, I use Win7 64 bits and \executesystemcommand works also fine (I use it every day). Sorry, but I’m afraid I don’t have a clue why it doesn’t work in your system. Pablo -- http://www.ousia.tk ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: \executesystemcommand dont work? 2015-02-16 20:20 ` Pablo Rodriguez @ 2015-02-16 21:20 ` Jaroslav Hajtmar 2015-02-16 21:37 ` Hans Hagen 2015-02-17 6:01 ` Pablo Rodriguez 0 siblings, 2 replies; 21+ messages in thread From: Jaroslav Hajtmar @ 2015-02-16 21:20 UTC (permalink / raw) To: ntg-context Thanks to Pablo for testing of functionality. Does anyone know whether it could be related to the random last comprehensive update of Win7? I read that Microsoft corrected with problem of big security hole. It is strange that a few days ago I find it all worked very well and after the last update of Windows 7 it not working. You can someone please verify this? Have you Pablo the latest Microsoft Windows 7 update?? Thanx Jaroslav Hajtmar Dne 16.2.2015 v 21:20 Pablo Rodriguez napsal(a): > On 02/16/2015 12:41 PM, Jaroslav Hajtmar wrote: >> Hi ConTeXist. >> After a long time I tried to recompile ConTeXt file that contained the >> \executesystemcommand. It seems to me that this command stopped working. >> Can anyone confirm or refute this my perception? > Hi Jaroslav, > > the sample you sent works fine for me. Both files get compiled. > >> I call \executesystemcommand to compiling another ConTeXt file from >> running ConTeXt. I use Windows 7 and problem is under TeXlive 2014 >> version and Standalone version too. > I’m using latest beta in Fedora 20. > > At work, I use Win7 64 bits and \executesystemcommand works also fine (I > use it every day). > > Sorry, but I’m afraid I don’t have a clue why it doesn’t work in your > system. > > > Pablo ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: \executesystemcommand dont work? 2015-02-16 21:20 ` Jaroslav Hajtmar @ 2015-02-16 21:37 ` Hans Hagen 2015-02-17 6:01 ` Pablo Rodriguez 1 sibling, 0 replies; 21+ messages in thread From: Hans Hagen @ 2015-02-16 21:37 UTC (permalink / raw) To: hajtmar, mailing list for ConTeXt users On 2/16/2015 10:20 PM, Jaroslav Hajtmar wrote: > Thanks to Pablo for testing of functionality. > Does anyone know whether it could be related to the random last > comprehensive update of Win7? I read that Microsoft corrected with > problem of big security hole. > > It is strange that a few days ago I find it all worked very well and > after the last update of Windows 7 it not working. > You can someone please verify this? > > Have you Pablo the latest Microsoft Windows 7 update?? It's hard to imagine that such a system call changes. I use windows 8 which seems to work ok. Are you sure that you use no local patches? A while ago all file io and system code in mkiv was wrapped in a way that permits sandboxing (that was already the case but now it's a bit more flexible and efficient). Hans ps. You had issues on your machine before with executing if I remember right. Maybe something fundamental> ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: \executesystemcommand dont work? 2015-02-16 21:20 ` Jaroslav Hajtmar 2015-02-16 21:37 ` Hans Hagen @ 2015-02-17 6:01 ` Pablo Rodriguez 1 sibling, 0 replies; 21+ messages in thread From: Pablo Rodriguez @ 2015-02-17 6:01 UTC (permalink / raw) To: mailing list for ConTeXt users On 02/16/2015 10:20 PM, Jaroslav Hajtmar wrote: > Thanks to Pablo for testing of functionality. > Does anyone know whether it could be related to the random last > comprehensive update of Win7? I read that Microsoft corrected with > problem of big security hole. > > It is strange that a few days ago I find it all worked very well and > after the last update of Windows 7 it not working. > You can someone please verify this? > > Have you Pablo the latest Microsoft Windows 7 update?? Hi Jaroslav, I’m on Fedora 20, no Win7 here. I had a similar problem with geany in WinXP. I couldn’t get \executesystemcommand running. I had to switch to Notepad++ because of this. I still wonder what was wrong with that (although I didn’t investigate it further). Just in case it might help, Pablo -- http://www.ousia.tk ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: \executesystemcommand dont work? 2015-02-16 11:41 Jaroslav Hajtmar 2015-02-16 20:20 ` Pablo Rodriguez @ 2015-02-16 21:47 ` Aditya Mahajan 2015-02-16 22:44 ` Jaroslav Hajtmar 1 sibling, 1 reply; 21+ messages in thread From: Aditya Mahajan @ 2015-02-16 21:47 UTC (permalink / raw) To: hajtmar, mailing list for ConTeXt users On Mon, 16 Feb 2015, Jaroslav Hajtmar wrote: > Hi ConTeXist. > After a long time I tried to recompile ConTeXt file that contained the > \executesystemcommand. It seems to me that this command stopped working. > Can anyone confirm or refute this my perception? > I call \executesystemcommand to compiling another ConTeXt file from > running ConTeXt. I use Windows 7 and problem is under TeXlive 2014 > version and Standalone version too. Is write18 enabled? You'll see a message in the 2nd or 3rd line when you run context, telling the status of write18. What happens if you use \immediate\write18{context --version} (Check the console output for an appropriate message) Aditya ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: \executesystemcommand dont work? 2015-02-16 21:47 ` Aditya Mahajan @ 2015-02-16 22:44 ` Jaroslav Hajtmar 2015-02-16 22:59 ` Aditya Mahajan 2015-02-16 23:20 ` luigi scarso 0 siblings, 2 replies; 21+ messages in thread From: Jaroslav Hajtmar @ 2015-02-16 22:44 UTC (permalink / raw) To: mailing list for ConTeXt users Thanx Aditya for reply. I compile this ConTeXt file: \starttext \immediate\write18{context --version} \stoptext with last standalone version of ConTeXt (minimals). Below is the console output and log file. I do not know whether this can decipher be from a reading. It seems that write18 is enabled. I do not know what could have happened and why it does not work. Can be a problem in collision TeXlive vs Standalone version (paths problem)? I do not know how to fix it. I tried again to install the standalone version, but it did not help. I hope that I have somehow smashed up Windows because reinstalling windows because of dysfunctional ConTeXt me quite a scare... Thanx Jaroslav Hajtmar C:\$~1da\ConTeXt\ConTeXt-Tests\my_way\ScanCSV\t-scancsv_ConTeXt_module\2PabloRod riguez5\bbb>context test mtx-context | warning: no (local) file './test', proceeding mtx-context | run 1: luatex --fmt="C:/context/tex/texmf-cache/luatex-cache/c ontext/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en" --jobname="test" --lua="C:/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb 1556f32e/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c: fulljobname="./test" --c:input="./test" --c:kindofrun=1 --c:maxnofruns=8 "cont-y es.mkiv" This is LuaTeX, Version beta-0.79.1 (TeX Live 2014/W32TeX) (rev 5064) \write18 enabled. open source > 1 > 1 > C:/context/tex/texmf-context/tex/context/base/cont-yes .mkiv > ConTeXt ver: 2015.02.03 23:55 MKIV beta fmt: 2015.2.16 int: english/english > > system > 'cont-new.mkiv' loaded open source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new .mkiv close source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new .mkiv system > files > jobname 'test', input './test', result 'test' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancs v_ConTeXt_module/2PabloRodriguez5/bbb/test.tex fonts > preloading latin modern fonts (second stage) fonts > 'fallback modern-designsize rm 12pt' is loaded close source > 2 > 3 > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancs v_ConTeXt_module/2PabloRodriguez5/bbb/test.tex close source > 1 > 3 > C:/context/tex/texmf-context/tex/context/base/cont-yes .mkiv mkiv lua stats > used config file: selfautoparent:/texmf/web2c/texmfcnf.lua mkiv lua stats > used cache path: C:/context/tex/texmf-cache/luatex-cache/conte xt/5fe67e0bfe781ce0dde776fb1556f32e mkiv lua stats > resource resolver: loadtime 0.012 seconds, 0 scans with scanti me 0.000 seconds, 0 shared scans, 8 found files, scanned paths: <none> mkiv lua stats > stored bytecode data: 364 modules (0.209 sec), 76 tables (0.00 5 sec), 440 chunks (0.214 sec) mkiv lua stats > running in nuts mode: yes mkiv lua stats > cleaned up reserved nodes: 41 nodes, 439 lists of 438 mkiv lua stats > node memory usage: 2 glue, 2 penalty, 6 attribute, 20 glue_spe c, 2 attribute_list, 2 temp mkiv lua stats > node list callback tasks: 6 unique task lists, 2 instances (re )created, 3 calls mkiv lua stats > used backend: pdf (backend for directly generating pdf output) mkiv lua stats > loaded patterns: en::2, load time: 0.000 mkiv lua stats > jobdata time: 0.003 seconds saving, 0.000 seconds loading mkiv lua stats > callbacks: 55 direct, 239 indirect, 294 total mkiv lua stats > result saved in file: test.pdf, compresslevel 3, objectcompres slevel 3 mkiv lua stats > loaded fonts: 2 files: latinmodern-math.otf, lmroman12-regular .otf mkiv lua stats > fonts load time: 0.239 seconds mkiv lua stats > used platform: win64, type: windows, binary subtree: texmf-win 64 mkiv lua stats > luatex banner: this is luatex, version beta-0.79.1 (tex live 2 014/w32tex) (rev 5064) mkiv lua stats > control sequences: 40425 of 65536 + 100000 mkiv lua stats > lua properties: engine: lua, used memory: 60 MB (ctx: 60 MB), hash type: lua, hash chars: min(64,40), symbol mask: utf (¤ä╬Á¤ç) mkiv lua stats > runtime: 0.627 seconds mtx-context | run 2: luatex --fmt="C:/context/tex/texmf-cache/luatex-cache/c ontext/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en" --jobname="test" --lua="C:/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb 1556f32e/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=2 --c: fulljobname="./test" --c:input="./test" --c:kindofrun=2 --c:maxnofruns=8 "cont-y es.mkiv" This is LuaTeX, Version beta-0.79.1 (TeX Live 2014/W32TeX) (rev 5064) \write18 enabled. open source > 1 > 1 > C:/context/tex/texmf-context/tex/context/base/cont-yes .mkiv > ConTeXt ver: 2015.02.03 23:55 MKIV beta fmt: 2015.2.16 int: english/english > > system > 'cont-new.mkiv' loaded open source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new .mkiv close source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new .mkiv system > files > jobname 'test', input './test', result 'test' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancs v_ConTeXt_module/2PabloRodriguez5/bbb/test.tex fonts > preloading latin modern fonts (second stage) fonts > 'fallback modern-designsize rm 12pt' is loaded close source > 2 > 3 > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancs v_ConTeXt_module/2PabloRodriguez5/bbb/test.tex close source > 1 > 3 > C:/context/tex/texmf-context/tex/context/base/cont-yes .mkiv mkiv lua stats > used config file: selfautoparent:/texmf/web2c/texmfcnf.lua mkiv lua stats > used cache path: C:/context/tex/texmf-cache/luatex-cache/conte xt/5fe67e0bfe781ce0dde776fb1556f32e mkiv lua stats > resource resolver: loadtime 0.012 seconds, 0 scans with scanti me 0.000 seconds, 0 shared scans, 8 found files, scanned paths: <none> mkiv lua stats > stored bytecode data: 364 modules (0.201 sec), 76 tables (0.00 5 sec), 440 chunks (0.206 sec) mkiv lua stats > running in nuts mode: yes mkiv lua stats > cleaned up reserved nodes: 41 nodes, 439 lists of 438 mkiv lua stats > node memory usage: 2 glue, 2 penalty, 6 attribute, 20 glue_spe c, 2 attribute_list, 2 temp mkiv lua stats > node list callback tasks: 6 unique task lists, 2 instances (re )created, 3 calls mkiv lua stats > used backend: pdf (backend for directly generating pdf output) mkiv lua stats > loaded patterns: en::2, load time: 0.000 mkiv lua stats > jobdata time: 0.004 seconds saving, 0.001 seconds loading mkiv lua stats > callbacks: 55 direct, 239 indirect, 294 total mkiv lua stats > randomizer: initialized with value 0.53962828455458 mkiv lua stats > result saved in file: test.pdf, compresslevel 3, objectcompres slevel 3 mkiv lua stats > loaded fonts: 2 files: latinmodern-math.otf, lmroman12-regular .otf mkiv lua stats > fonts load time: 0.240 seconds mkiv lua stats > used platform: win64, type: windows, binary subtree: texmf-win 64 mkiv lua stats > luatex banner: this is luatex, version beta-0.79.1 (tex live 2 014/w32tex) (rev 5064) mkiv lua stats > control sequences: 40424 of 65536 + 100000 mkiv lua stats > lua properties: engine: lua, used memory: 60 MB (ctx: 60 MB), hash type: lua, hash chars: min(64,40), symbol mask: utf (¤ä╬Á¤ç) mkiv lua stats > runtime: 0.639 seconds mtx-context | run 3: luatex --fmt="C:/context/tex/texmf-cache/luatex-cache/c ontext/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en" --jobname="test" --lua="C:/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb 1556f32e/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=3 --c: fulljobname="./test" --c:input="./test" --c:kindofrun=2 --c:maxnofruns=8 "cont-y es.mkiv" This is LuaTeX, Version beta-0.79.1 (TeX Live 2014/W32TeX) (rev 5064) \write18 enabled. open source > 1 > 1 > C:/context/tex/texmf-context/tex/context/base/cont-yes .mkiv > ConTeXt ver: 2015.02.03 23:55 MKIV beta fmt: 2015.2.16 int: english/english > > system > 'cont-new.mkiv' loaded open source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new .mkiv close source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new .mkiv system > files > jobname 'test', input './test', result 'test' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancs v_ConTeXt_module/2PabloRodriguez5/bbb/test.tex fonts > preloading latin modern fonts (second stage) fonts > 'fallback modern-designsize rm 12pt' is loaded close source > 2 > 3 > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancs v_ConTeXt_module/2PabloRodriguez5/bbb/test.tex close source > 1 > 3 > C:/context/tex/texmf-context/tex/context/base/cont-yes .mkiv mkiv lua stats > used config file: selfautoparent:/texmf/web2c/texmfcnf.lua mkiv lua stats > used cache path: C:/context/tex/texmf-cache/luatex-cache/conte xt/5fe67e0bfe781ce0dde776fb1556f32e mkiv lua stats > resource resolver: loadtime 0.014 seconds, 0 scans with scanti me 0.000 seconds, 0 shared scans, 8 found files, scanned paths: <none> mkiv lua stats > stored bytecode data: 364 modules (0.220 sec), 76 tables (0.00 6 sec), 440 chunks (0.226 sec) mkiv lua stats > running in nuts mode: yes mkiv lua stats > cleaned up reserved nodes: 41 nodes, 439 lists of 438 mkiv lua stats > node memory usage: 2 glue, 2 penalty, 6 attribute, 20 glue_spe c, 2 attribute_list, 2 temp mkiv lua stats > node list callback tasks: 6 unique task lists, 2 instances (re )created, 3 calls mkiv lua stats > used backend: pdf (backend for directly generating pdf output) mkiv lua stats > loaded patterns: en::2, load time: 0.000 mkiv lua stats > jobdata time: 0.003 seconds saving, 0.001 seconds loading mkiv lua stats > callbacks: 55 direct, 239 indirect, 294 total mkiv lua stats > randomizer: resumed with value 0.53962828455458 mkiv lua stats > result saved in file: test.pdf, compresslevel 3, objectcompres slevel 3 mkiv lua stats > loaded fonts: 2 files: latinmodern-math.otf, lmroman12-regular .otf mkiv lua stats > fonts load time: 0.250 seconds mkiv lua stats > used platform: win64, type: windows, binary subtree: texmf-win 64 mkiv lua stats > luatex banner: this is luatex, version beta-0.79.1 (tex live 2 014/w32tex) (rev 5064) mkiv lua stats > control sequences: 40425 of 65536 + 100000 mkiv lua stats > lua properties: engine: lua, used memory: 60 MB (ctx: 60 MB), hash type: lua, hash chars: min(64,40), symbol mask: utf (¤ä╬Á¤ç) mkiv lua stats > runtime: 0.656 seconds system | total runtime: 3.024 seconds C:\$~1da\ConTeXt\ConTeXt-Tests\my_way\ScanCSV\t-scancsv_ConTeXt_module\2PabloRod riguez5\bbb> Here is log file: open source > 1 > 1 > C:/context/tex/texmf-context/tex/context/base/cont-yes.mkiv > ConTeXt ver: 2015.02.03 23:55 MKIV beta fmt: 2015.2.16 int: english/english > > system > 'cont-new.mkiv' loaded open source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new.mkiv close source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new.mkiv system > files > jobname 'test', input './test', result 'test' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancsv_ConTeXt_module/2PabloRodriguez5/bbb/test.tex fonts > preloading latin modern fonts (second stage) fonts > 'fallback modern-designsize rm 12pt' is loaded close source > 2 > 3 > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancsv_ConTeXt_module/2PabloRodriguez5/bbb/test.tex close source > 1 > 3 > C:/context/tex/texmf-context/tex/context/base/cont-yes.mkiv system > structure > start used structure used structure > text: test system > structure > stop used structure system > files > start used files used file > 1: filename=cont-yes.mkiv filetype=tex foundname=C:/context/tex/texmf-context/tex/context/base/cont-yes.mkiv usedmethod=database used file > 2: filename=publ-imp-apa.lua filetype=lua foundname=C:/context/tex/texmf-context/tex/context/base/publ-imp-apa.lua usedmethod=database used file > 3: filename=cont-new.mkiv filetype=tex foundname=C:/context/tex/texmf-context/tex/context/base/cont-new.mkiv usedmethod=database used file > 4: filename=lang-us.lua filetype=lua foundname=C:/context/tex/texmf-context/tex/context/patterns/lang-us.lua usedmethod=database used file > 5: filename=C:\$~1da\ConTeXt\ConTeXt-Tests\my_way\ScanCSV\t-scancsv_ConTeXt_module\2PabloRodriguez5\bbb/test foundname=C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancsv_ConTeXt_module/2PabloRodriguez5/bbb/test.tex usedmethod=qualified used file > 6: filename=lm.lfg filetype=tex foundname=C:/context/tex/texmf-context/tex/context/fonts/lm.lfg usedmethod=database used file > 7: filename=lmroman12-regular filetype=otf format=otf foundname=C:/context/tex/texmf/fonts/opentype/public/lm/lmroman12-regular.otf usedmethod=database used file > 8: filename=latinmodern-math.otf filetype=opentypefonts foundname=C:/context/tex/texmf/fonts/opentype/public/lm-math/latinmodern-math.otf usedmethod=database system > files > stop used files system > options > start commandline options used option > currentrun="3" used option > fulljobname="./test" used option > input="./test" used option > kindofrun="2" used option > maxnofruns="8" used option > no-parse-first-line="true" system > options > stop commandline options system > options > start commandline files used file > 1: ./test system > options > stop commandline files mkiv lua stats > used config file: selfautoparent:/texmf/web2c/texmfcnf.lua mkiv lua stats > used cache path: C:/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e mkiv lua stats > resource resolver: loadtime 0.014 seconds, 0 scans with scantime 0.000 seconds, 0 shared scans, 8 found files, scanned paths: <none> mkiv lua stats > stored bytecode data: 364 modules (0.220 sec), 76 tables (0.006 sec), 440 chunks (0.226 sec) mkiv lua stats > running in nuts mode: yes mkiv lua stats > cleaned up reserved nodes: 41 nodes, 439 lists of 438 mkiv lua stats > node memory usage: 2 glue, 2 penalty, 6 attribute, 20 glue_spec, 2 attribute_list, 2 temp mkiv lua stats > node list callback tasks: 6 unique task lists, 2 instances (re)created, 3 calls mkiv lua stats > used backend: pdf (backend for directly generating pdf output) mkiv lua stats > loaded patterns: en::2, load time: 0.000 mkiv lua stats > jobdata time: 0.003 seconds saving, 0.001 seconds loading mkiv lua stats > callbacks: 55 direct, 239 indirect, 294 total mkiv lua stats > randomizer: resumed with value 0.53962828455458 mkiv lua stats > result saved in file: test.pdf, compresslevel 3, objectcompresslevel 3 mkiv lua stats > loaded fonts: 2 files: latinmodern-math.otf, lmroman12-regular.otf mkiv lua stats > fonts load time: 0.250 seconds mkiv lua stats > used platform: win64, type: windows, binary subtree: texmf-win64 mkiv lua stats > luatex banner: this is luatex, version beta-0.79.1 (tex live 2014/w32tex) (rev 5064) mkiv lua stats > control sequences: 40425 of 65536 + 100000 mkiv lua stats > lua properties: engine: lua, used memory: 60 MB (ctx: 60 MB), hash type: lua, hash chars: min(64,40), symbol mask: utf (τεχ) mkiv lua stats > runtime: 0.656 seconds Dne 16.2.2015 v 22:47 Aditya Mahajan napsal(a): > On Mon, 16 Feb 2015, Jaroslav Hajtmar wrote: > >> Hi ConTeXist. >> After a long time I tried to recompile ConTeXt file that contained >> the \executesystemcommand. It seems to me that this command stopped >> working. >> Can anyone confirm or refute this my perception? >> I call \executesystemcommand to compiling another ConTeXt file from >> running ConTeXt. I use Windows 7 and problem is under TeXlive 2014 >> version and Standalone version too. > > Is write18 enabled? You'll see a message in the 2nd or 3rd line when > you run context, telling the status of write18. > > What happens if you use > > \immediate\write18{context --version} > > (Check the console output for an appropriate message) > > Aditya > > > ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: \executesystemcommand dont work? 2015-02-16 22:44 ` Jaroslav Hajtmar @ 2015-02-16 22:59 ` Aditya Mahajan 2015-02-17 5:47 ` Jaroslav Hajtmar 2015-02-16 23:20 ` luigi scarso 1 sibling, 1 reply; 21+ messages in thread From: Aditya Mahajan @ 2015-02-16 22:59 UTC (permalink / raw) To: hajtmar, mailing list for ConTeXt users On Mon, 16 Feb 2015, Jaroslav Hajtmar wrote: > Thanx Aditya for reply. > > I compile this ConTeXt file: > > \starttext > \immediate\write18{context --version} > \stoptext > > with last standalone version of ConTeXt (minimals). Below is the console > output and log file. write18 is enabled on your system; I don't know why the shell command does not work. Try this instead (I assume that windows comes with the echo command): \starttext \writestatus{test}{before calling shell command} \immediate\write18{echo HELP} \writestatus{test}{after calling shell command} \stoptext Post only the output of the 2nd run (so that the console output is shown once and not thrice). How are you running context? (Typing the command from a terminal, or using an IDE?) Aditya ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: \executesystemcommand dont work? 2015-02-16 22:59 ` Aditya Mahajan @ 2015-02-17 5:47 ` Jaroslav Hajtmar 0 siblings, 0 replies; 21+ messages in thread From: Jaroslav Hajtmar @ 2015-02-17 5:47 UTC (permalink / raw) To: Aditya Mahajan, mailing list for ConTeXt users Hi Aditya. Thanx for reply. I am sending result from output console from your example ie: \starttext \writestatus{test}{before calling shell command} \immediate\write18{echo HELP} \writestatus{test}{after calling shell command} \stoptext Output is below. Regarding the call ConTeXt, I often calls it directly from the editor (PsPad) but when frequently repeated compilations, then I type commands directly from terminal (command line of windows) Thankx for attempt to solve my problem. Jaroslav Hajtmar C:\$~1da\ConTeXt\ConTeXt-Tests\my_way\ScanCSV\t-scancsv_ConTeXt_module\2PabloRod riguez5\bbb>context test mtx-context | warning: no (local) file './test', proceeding mtx-context | run 1: luatex --fmt="C:/context/tex/texmf-cache/luatex-cache/c ontext/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en" --jobname="test" --lua="C:/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb 1556f32e/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c: fulljobname="./test" --c:input="./test" --c:kindofrun=1 --c:maxnofruns=8 "cont-y es.mkiv" This is LuaTeX, Version beta-0.79.1 (TeX Live 2014/W32TeX) (rev 5064) \write18 enabled. open source > 1 > 1 > C:/context/tex/texmf-context/tex/context/base/cont-yes .mkiv > ConTeXt ver: 2015.02.03 23:55 MKIV beta fmt: 2015.2.16 int: english/english > > system > 'cont-new.mkiv' loaded open source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new .mkiv close source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new .mkiv system > files > jobname 'test', input './test', result 'test' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancs v_ConTeXt_module/2PabloRodriguez5/bbb/test.tex fonts > preloading latin modern fonts (second stage) fonts > 'fallback modern-designsize rm 12pt' is loaded test > before calling shell command test > after calling shell command close source > 2 > 3 > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancs v_ConTeXt_module/2PabloRodriguez5/bbb/test.tex close source > 1 > 3 > C:/context/tex/texmf-context/tex/context/base/cont-yes .mkiv mkiv lua stats > used config file: selfautoparent:/texmf/web2c/texmfcnf.lua mkiv lua stats > used cache path: C:/context/tex/texmf-cache/luatex-cache/conte xt/5fe67e0bfe781ce0dde776fb1556f32e mkiv lua stats > resource resolver: loadtime 0.012 seconds, 0 scans with scanti me 0.000 seconds, 0 shared scans, 8 found files, scanned paths: <none> mkiv lua stats > stored bytecode data: 364 modules (0.231 sec), 76 tables (0.00 6 sec), 440 chunks (0.237 sec) mkiv lua stats > running in nuts mode: yes mkiv lua stats > cleaned up reserved nodes: 41 nodes, 439 lists of 438 mkiv lua stats > node memory usage: 2 glue, 2 penalty, 6 attribute, 20 glue_spe c, 2 attribute_list, 2 temp mkiv lua stats > node list callback tasks: 6 unique task lists, 2 instances (re )created, 3 calls mkiv lua stats > used backend: pdf (backend for directly generating pdf output) mkiv lua stats > loaded patterns: en::2, load time: 0.000 mkiv lua stats > jobdata time: 0.004 seconds saving, 0.001 seconds loading mkiv lua stats > callbacks: 55 direct, 241 indirect, 296 total mkiv lua stats > randomizer: resumed with value 0.53962828455458 mkiv lua stats > result saved in file: test.pdf, compresslevel 3, objectcompres slevel 3 mkiv lua stats > loaded fonts: 2 files: latinmodern-math.otf, lmroman12-regular .otf mkiv lua stats > fonts load time: 0.267 seconds mkiv lua stats > used platform: win64, type: windows, binary subtree: texmf-win 64 mkiv lua stats > luatex banner: this is luatex, version beta-0.79.1 (tex live 2 014/w32tex) (rev 5064) mkiv lua stats > control sequences: 40426 of 65536 + 100000 mkiv lua stats > lua properties: engine: lua, used memory: 59 MB (ctx: 59 MB), hash type: lua, hash chars: min(64,40), symbol mask: utf (¤ä╬Á¤ç) mkiv lua stats > runtime: 0.721 seconds system | total runtime: 1.095 seconds C:\$~1da\ConTeXt\ConTeXt-Tests\my_way\ScanCSV\t-scancsv_ConTeXt_module\2PabloRod riguez5\bbb> And here is log file: open source > 1 > 1 > C:/context/tex/texmf-context/tex/context/base/cont-yes.mkiv > ConTeXt ver: 2015.02.03 23:55 MKIV beta fmt: 2015.2.16 int: english/english > > system > 'cont-new.mkiv' loaded open source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new.mkiv close source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new.mkiv system > files > jobname 'test', input './test', result 'test' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancsv_ConTeXt_module/2PabloRodriguez5/bbb/test.tex fonts > preloading latin modern fonts (second stage) fonts > 'fallback modern-designsize rm 12pt' is loaded test > before calling shell command test > after calling shell command close source > 2 > 3 > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancsv_ConTeXt_module/2PabloRodriguez5/bbb/test.tex close source > 1 > 3 > C:/context/tex/texmf-context/tex/context/base/cont-yes.mkiv system > structure > start used structure used structure > text: test system > structure > stop used structure system > files > start used files used file > 1: filename=cont-yes.mkiv filetype=tex foundname=C:/context/tex/texmf-context/tex/context/base/cont-yes.mkiv usedmethod=database used file > 2: filename=publ-imp-apa.lua filetype=lua foundname=C:/context/tex/texmf-context/tex/context/base/publ-imp-apa.lua usedmethod=database used file > 3: filename=cont-new.mkiv filetype=tex foundname=C:/context/tex/texmf-context/tex/context/base/cont-new.mkiv usedmethod=database used file > 4: filename=lang-us.lua filetype=lua foundname=C:/context/tex/texmf-context/tex/context/patterns/lang-us.lua usedmethod=database used file > 5: filename=C:\$~1da\ConTeXt\ConTeXt-Tests\my_way\ScanCSV\t-scancsv_ConTeXt_module\2PabloRodriguez5\bbb/test foundname=C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancsv_ConTeXt_module/2PabloRodriguez5/bbb/test.tex usedmethod=qualified used file > 6: filename=lm.lfg filetype=tex foundname=C:/context/tex/texmf-context/tex/context/fonts/lm.lfg usedmethod=database used file > 7: filename=lmroman12-regular filetype=otf format=otf foundname=C:/context/tex/texmf/fonts/opentype/public/lm/lmroman12-regular.otf usedmethod=database used file > 8: filename=latinmodern-math.otf filetype=opentypefonts foundname=C:/context/tex/texmf/fonts/opentype/public/lm-math/latinmodern-math.otf usedmethod=database system > files > stop used files system > options > start commandline options used option > currentrun="1" used option > fulljobname="./test" used option > input="./test" used option > kindofrun="1" used option > maxnofruns="8" used option > no-parse-first-line="true" system > options > stop commandline options system > options > start commandline files used file > 1: ./test system > options > stop commandline files mkiv lua stats > used config file: selfautoparent:/texmf/web2c/texmfcnf.lua mkiv lua stats > used cache path: C:/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e mkiv lua stats > resource resolver: loadtime 0.012 seconds, 0 scans with scantime 0.000 seconds, 0 shared scans, 8 found files, scanned paths: <none> mkiv lua stats > stored bytecode data: 364 modules (0.231 sec), 76 tables (0.006 sec), 440 chunks (0.237 sec) mkiv lua stats > running in nuts mode: yes mkiv lua stats > cleaned up reserved nodes: 41 nodes, 439 lists of 438 mkiv lua stats > node memory usage: 2 glue, 2 penalty, 6 attribute, 20 glue_spec, 2 attribute_list, 2 temp mkiv lua stats > node list callback tasks: 6 unique task lists, 2 instances (re)created, 3 calls mkiv lua stats > used backend: pdf (backend for directly generating pdf output) mkiv lua stats > loaded patterns: en::2, load time: 0.000 mkiv lua stats > jobdata time: 0.004 seconds saving, 0.001 seconds loading mkiv lua stats > callbacks: 55 direct, 241 indirect, 296 total mkiv lua stats > randomizer: resumed with value 0.53962828455458 mkiv lua stats > result saved in file: test.pdf, compresslevel 3, objectcompresslevel 3 mkiv lua stats > loaded fonts: 2 files: latinmodern-math.otf, lmroman12-regular.otf mkiv lua stats > fonts load time: 0.267 seconds mkiv lua stats > used platform: win64, type: windows, binary subtree: texmf-win64 mkiv lua stats > luatex banner: this is luatex, version beta-0.79.1 (tex live 2014/w32tex) (rev 5064) mkiv lua stats > control sequences: 40426 of 65536 + 100000 mkiv lua stats > lua properties: engine: lua, used memory: 59 MB (ctx: 59 MB), hash type: lua, hash chars: min(64,40), symbol mask: utf (τεχ) mkiv lua stats > runtime: 0.721 seconds Dne 16.2.2015 v 23:59 Aditya Mahajan napsal(a): > On Mon, 16 Feb 2015, Jaroslav Hajtmar wrote: > >> Thanx Aditya for reply. >> >> I compile this ConTeXt file: >> >> \starttext >> \immediate\write18{context --version} >> \stoptext >> >> with last standalone version of ConTeXt (minimals). Below is the >> console output and log file. > > write18 is enabled on your system; I don't know why the shell command > does not work. > > Try this instead (I assume that windows comes with the echo command): > > \starttext > \writestatus{test}{before calling shell command} > \immediate\write18{echo HELP} > \writestatus{test}{after calling shell command} > \stoptext > > Post only the output of the 2nd run (so that the console output is > shown once and not thrice). > > How are you running context? (Typing the command from a terminal, or > using an IDE?) > > Aditya > ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: \executesystemcommand dont work? 2015-02-16 22:44 ` Jaroslav Hajtmar 2015-02-16 22:59 ` Aditya Mahajan @ 2015-02-16 23:20 ` luigi scarso 2015-02-17 5:54 ` Jaroslav Hajtmar 1 sibling, 1 reply; 21+ messages in thread From: luigi scarso @ 2015-02-16 23:20 UTC (permalink / raw) To: Jaroslav Hajtmar, mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 359 bytes --] On Mon, Feb 16, 2015 at 11:44 PM, Jaroslav Hajtmar <hajtmar@gyza.cz> wrote: > Thanx Aditya for reply. > > I compile this ConTeXt file: > > \starttext > \immediate\write18{context --version} > \stoptext > > \starttext \immediate\write18{echo "OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO"} \stoptext works ok here with the latest standalone and win 8.1 -- luigi [-- Attachment #1.2: Type: text/html, Size: 875 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 21+ messages in thread
* Re: \executesystemcommand dont work? 2015-02-16 23:20 ` luigi scarso @ 2015-02-17 5:54 ` Jaroslav Hajtmar 0 siblings, 0 replies; 21+ messages in thread From: Jaroslav Hajtmar @ 2015-02-17 5:54 UTC (permalink / raw) To: luigi scarso, mailing list for ConTeXt users Hi Luigi. Thanx for reply. I am sending result from output console from your example ie: \starttext \immediate\write18{echo "OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO"} \stoptext Output is below. To be honest, I've never done such a thing and did not examine how many times ConTeXt runs. I have always relied on the default settings. Thankx for attempt to solve my problem. Jaroslav Hajtmar C:\$~1da\ConTeXt\ConTeXt-Tests\my_way\ScanCSV\t-scancsv_ConTeXt_module\2PabloRod riguez5\bbb>context test mtx-context | warning: no (local) file './test', proceeding mtx-context | run 1: luatex --fmt="C:/context/tex/texmf-cache/luatex-cache/c ontext/5fe67e0bfe781ce0dde776fb1556f32e/formats/luatex/cont-en" --jobname="test" --lua="C:/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb 1556f32e/formats/luatex/cont-en.lui" --no-parse-first-line --c:currentrun=1 --c: fulljobname="./test" --c:input="./test" --c:kindofrun=1 --c:maxnofruns=8 "cont-y es.mkiv" This is LuaTeX, Version beta-0.79.1 (TeX Live 2014/W32TeX) (rev 5064) \write18 enabled. open source > 1 > 1 > C:/context/tex/texmf-context/tex/context/base/cont-yes .mkiv > ConTeXt ver: 2015.02.03 23:55 MKIV beta fmt: 2015.2.16 int: english/english > > system > 'cont-new.mkiv' loaded open source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new .mkiv close source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new .mkiv system > files > jobname 'test', input './test', result 'test' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancs v_ConTeXt_module/2PabloRodriguez5/bbb/test.tex fonts > preloading latin modern fonts (second stage) fonts > 'fallback modern-designsize rm 12pt' is loaded close source > 2 > 3 > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancs v_ConTeXt_module/2PabloRodriguez5/bbb/test.tex close source > 1 > 3 > C:/context/tex/texmf-context/tex/context/base/cont-yes .mkiv mkiv lua stats > used config file: selfautoparent:/texmf/web2c/texmfcnf.lua mkiv lua stats > used cache path: C:/context/tex/texmf-cache/luatex-cache/conte xt/5fe67e0bfe781ce0dde776fb1556f32e mkiv lua stats > resource resolver: loadtime 0.011 seconds, 0 scans with scanti me 0.000 seconds, 0 shared scans, 8 found files, scanned paths: <none> mkiv lua stats > stored bytecode data: 364 modules (0.224 sec), 76 tables (0.00 6 sec), 440 chunks (0.230 sec) mkiv lua stats > running in nuts mode: yes mkiv lua stats > cleaned up reserved nodes: 41 nodes, 439 lists of 438 mkiv lua stats > node memory usage: 2 glue, 2 penalty, 6 attribute, 20 glue_spe c, 2 attribute_list, 2 temp mkiv lua stats > node list callback tasks: 6 unique task lists, 2 instances (re )created, 3 calls mkiv lua stats > used backend: pdf (backend for directly generating pdf output) mkiv lua stats > loaded patterns: en::2, load time: 0.000 mkiv lua stats > jobdata time: 0.003 seconds saving, 0.001 seconds loading mkiv lua stats > callbacks: 55 direct, 239 indirect, 294 total mkiv lua stats > randomizer: resumed with value 0.53962828455458 mkiv lua stats > result saved in file: test.pdf, compresslevel 3, objectcompres slevel 3 mkiv lua stats > loaded fonts: 2 files: latinmodern-math.otf, lmroman12-regular .otf mkiv lua stats > fonts load time: 0.241 seconds mkiv lua stats > used platform: win64, type: windows, binary subtree: texmf-win 64 mkiv lua stats > luatex banner: this is luatex, version beta-0.79.1 (tex live 2 014/w32tex) (rev 5064) mkiv lua stats > control sequences: 40426 of 65536 + 100000 mkiv lua stats > lua properties: engine: lua, used memory: 56 MB (ctx: 56 MB), hash type: lua, hash chars: min(64,40), symbol mask: utf (¤ä╬Á¤ç) mkiv lua stats > runtime: 0.643 seconds system | total runtime: 1.002 seconds C:\$~1da\ConTeXt\ConTeXt-Tests\my_way\ScanCSV\t-scancsv_ConTeXt_module\2PabloRod riguez5\bbb> and here is log file: open source > 1 > 1 > C:/context/tex/texmf-context/tex/context/base/cont-yes.mkiv > ConTeXt ver: 2015.02.03 23:55 MKIV beta fmt: 2015.2.16 int: english/english > > system > 'cont-new.mkiv' loaded open source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new.mkiv close source > 2 > 2 > C:/context/tex/texmf-context/tex/context/base/cont-new.mkiv system > files > jobname 'test', input './test', result 'test' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > 2 > 3 > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancsv_ConTeXt_module/2PabloRodriguez5/bbb/test.tex fonts > preloading latin modern fonts (second stage) fonts > 'fallback modern-designsize rm 12pt' is loaded close source > 2 > 3 > C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancsv_ConTeXt_module/2PabloRodriguez5/bbb/test.tex close source > 1 > 3 > C:/context/tex/texmf-context/tex/context/base/cont-yes.mkiv system > structure > start used structure used structure > text: test system > structure > stop used structure system > files > start used files used file > 1: filename=cont-yes.mkiv filetype=tex foundname=C:/context/tex/texmf-context/tex/context/base/cont-yes.mkiv usedmethod=database used file > 2: filename=publ-imp-apa.lua filetype=lua foundname=C:/context/tex/texmf-context/tex/context/base/publ-imp-apa.lua usedmethod=database used file > 3: filename=cont-new.mkiv filetype=tex foundname=C:/context/tex/texmf-context/tex/context/base/cont-new.mkiv usedmethod=database used file > 4: filename=lang-us.lua filetype=lua foundname=C:/context/tex/texmf-context/tex/context/patterns/lang-us.lua usedmethod=database used file > 5: filename=C:\$~1da\ConTeXt\ConTeXt-Tests\my_way\ScanCSV\t-scancsv_ConTeXt_module\2PabloRodriguez5\bbb/test foundname=C:/$~1da/ConTeXt/ConTeXt-Tests/my_way/ScanCSV/t-scancsv_ConTeXt_module/2PabloRodriguez5/bbb/test.tex usedmethod=qualified used file > 6: filename=lm.lfg filetype=tex foundname=C:/context/tex/texmf-context/tex/context/fonts/lm.lfg usedmethod=database used file > 7: filename=lmroman12-regular filetype=otf format=otf foundname=C:/context/tex/texmf/fonts/opentype/public/lm/lmroman12-regular.otf usedmethod=database used file > 8: filename=latinmodern-math.otf filetype=opentypefonts foundname=C:/context/tex/texmf/fonts/opentype/public/lm-math/latinmodern-math.otf usedmethod=database system > files > stop used files system > options > start commandline options used option > currentrun="1" used option > fulljobname="./test" used option > input="./test" used option > kindofrun="1" used option > maxnofruns="8" used option > no-parse-first-line="true" system > options > stop commandline options system > options > start commandline files used file > 1: ./test system > options > stop commandline files mkiv lua stats > used config file: selfautoparent:/texmf/web2c/texmfcnf.lua mkiv lua stats > used cache path: C:/context/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e mkiv lua stats > resource resolver: loadtime 0.011 seconds, 0 scans with scantime 0.000 seconds, 0 shared scans, 8 found files, scanned paths: <none> mkiv lua stats > stored bytecode data: 364 modules (0.224 sec), 76 tables (0.006 sec), 440 chunks (0.230 sec) mkiv lua stats > running in nuts mode: yes mkiv lua stats > cleaned up reserved nodes: 41 nodes, 439 lists of 438 mkiv lua stats > node memory usage: 2 glue, 2 penalty, 6 attribute, 20 glue_spec, 2 attribute_list, 2 temp mkiv lua stats > node list callback tasks: 6 unique task lists, 2 instances (re)created, 3 calls mkiv lua stats > used backend: pdf (backend for directly generating pdf output) mkiv lua stats > loaded patterns: en::2, load time: 0.000 mkiv lua stats > jobdata time: 0.003 seconds saving, 0.001 seconds loading mkiv lua stats > callbacks: 55 direct, 239 indirect, 294 total mkiv lua stats > randomizer: resumed with value 0.53962828455458 mkiv lua stats > result saved in file: test.pdf, compresslevel 3, objectcompresslevel 3 mkiv lua stats > loaded fonts: 2 files: latinmodern-math.otf, lmroman12-regular.otf mkiv lua stats > fonts load time: 0.241 seconds mkiv lua stats > used platform: win64, type: windows, binary subtree: texmf-win64 mkiv lua stats > luatex banner: this is luatex, version beta-0.79.1 (tex live 2014/w32tex) (rev 5064) mkiv lua stats > control sequences: 40426 of 65536 + 100000 mkiv lua stats > lua properties: engine: lua, used memory: 56 MB (ctx: 56 MB), hash type: lua, hash chars: min(64,40), symbol mask: utf (τεχ) mkiv lua stats > runtime: 0.643 seconds Dne 17.2.2015 v 0:20 luigi scarso napsal(a): > > \starttext > \immediate\write18{echo "OOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO"} > \stoptext ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 21+ messages in thread
end of thread, other threads:[~2015-02-17 21:10 UTC | newest] Thread overview: 21+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2015-02-17 7:04 \executesystemcommand dont work? Akira Kakuto 2015-02-17 8:55 ` Jaroslav Hajtmar 2015-02-17 10:29 ` Ulrike Fischer 2015-02-17 11:43 ` Jaroslav Hajtmar 2015-02-17 21:10 ` Ulrike Fischer -- strict thread matches above, loose matches on Subject: below -- 2015-02-17 13:55 Akira Kakuto 2015-02-17 13:21 Akira Kakuto 2015-02-17 12:21 Akira Kakuto 2015-02-17 12:58 ` Jaroslav Hajtmar 2015-02-17 9:25 Akira Kakuto 2015-02-16 11:41 Jaroslav Hajtmar 2015-02-16 20:20 ` Pablo Rodriguez 2015-02-16 21:20 ` Jaroslav Hajtmar 2015-02-16 21:37 ` Hans Hagen 2015-02-17 6:01 ` Pablo Rodriguez 2015-02-16 21:47 ` Aditya Mahajan 2015-02-16 22:44 ` Jaroslav Hajtmar 2015-02-16 22:59 ` Aditya Mahajan 2015-02-17 5:47 ` Jaroslav Hajtmar 2015-02-16 23:20 ` luigi scarso 2015-02-17 5:54 ` Jaroslav Hajtmar
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).