* Which standard installed font displays ' and ` good @ 2011-03-23 16:23 Cecil Westerhof 2011-03-23 16:30 ` mathew 2011-03-23 18:22 ` Wolfgang Schuster 0 siblings, 2 replies; 15+ messages in thread From: Cecil Westerhof @ 2011-03-23 16:23 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 243 bytes --] I am still experimenting. With the default ' is reasonably displayed, but ` not. I liked palatino, but then even ' is not displayed nicely. What is the best (standard installed) font where both ' and ` are good displayed? -- Cecil Westerhof [-- Attachment #1.2: Type: text/html, Size: 284 bytes --] [-- Attachment #2: Type: text/plain, Size: 486 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Which standard installed font displays ' and ` good 2011-03-23 16:23 Which standard installed font displays ' and ` good Cecil Westerhof @ 2011-03-23 16:30 ` mathew 2011-03-23 17:19 ` Cecil Westerhof 2011-03-23 18:22 ` Wolfgang Schuster 1 sibling, 1 reply; 15+ messages in thread From: mathew @ 2011-03-23 16:30 UTC (permalink / raw) To: mailing list for ConTeXt users On Wed, Mar 23, 2011 at 11:23, Cecil Westerhof <cldwesterhof@gmail.com> wrote: > I am still experimenting. With the default ' is reasonably displayed, but ` > not. > I liked palatino, but then even ' is not displayed nicely. What is the best > (standard installed) font where both ' and ` are good displayed? I think your expectations may be at fault. In ConTeXt, ` is not "open quote", it is backtick. If you want an open quote, you have to type one. Typeset this text to see what I mean: \starttext ` Backtick\crlf ' Apostrophe\crlf ‘ Open curly quote\crlf ’ Close curly quote \stoptext If you actually want backtick, perhaps you could say what you think is wrong with it in Palatino? mathew ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Which standard installed font displays ' and ` good 2011-03-23 16:30 ` mathew @ 2011-03-23 17:19 ` Cecil Westerhof 2011-03-23 18:49 ` Pontus Lurcock 0 siblings, 1 reply; 15+ messages in thread From: Cecil Westerhof @ 2011-03-23 17:19 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1500 bytes --] 2011/3/23 mathew <meta@pobox.com> > On Wed, Mar 23, 2011 at 11:23, Cecil Westerhof <cldwesterhof@gmail.com> > wrote: > > I am still experimenting. With the default ' is reasonably displayed, but > ` > > not. > > I liked palatino, but then even ' is not displayed nicely. What is the > best > > (standard installed) font where both ' and ` are good displayed? > > I think your expectations may be at fault. > You are completely right. That is why a mailing list like this is useful. ;-} > In ConTeXt, ` is not "open quote", it is backtick. If you want an open > quote, you have to type one. > > Typeset this text to see what I mean: > > \starttext > ` Backtick\crlf > ' Apostrophe\crlf > ‘ Open curly quote\crlf > ’ Close curly quote > \stoptext > > If you actually want backtick, perhaps you could say what you think is > wrong with it in Palatino? > Wrong is maybe not the correct word, but when compiling this code: \starttext ` Backtick\crlf ' Apostrophe\crlf ‘ Open curly quote\crlf ’ Close curly quote ‘some quoted text’ “some doublequoted text” \setupbodyfont[palatino,rm,12pt] ‘some quoted text’ “some doublequoted text” \stoptext Then I find the font from palatino better looking, but the default quotes better as the palatino's. I have to change all my ‘quotes’ again. Attached my Xmopdmap.extra which incorperates these single and double quotes. -- Cecil Westerhof [-- Attachment #1.2: Type: text/html, Size: 2117 bytes --] [-- Attachment #2: Xmodmap.extra --] [-- Type: application/octet-stream, Size: 1962 bytes --] !! The following four codes are system dependend and should be checked before using. !! alt gr 108 !! menu 135 !! windows 133 !! r-ctrl 105 keycode 108 = Mode_switch keycode 135 = Multi_key keysym grave = grave asciitilde leftsinglequotemark rightsinglequotemark keysym 1 = 1 exclam onesuperior onequarter keysym 2 = 2 at twosuperior onehalf keysym 3 = 3 numbersign threesuperior threequarters keysym 4 = 4 dollar foursuperior sterling keysym 5 = 5 percent fivesuperior endash keysym 6 = 6 asciicircum sixsuperior keysym 7 = 7 ampersand sevensuperior emdash keysym 8 = 8 asterisk eightsuperior keysym 9 = 9 parenleft ninesuperior keysym 0 = 0 parenright degree keysym minus = minus underscore yen keysym equal = equal plus notequal plusminus keysym w = w W aring Aring keysym e = e E EuroSign keysym r = r R registered keysym t = t T thorn Thorn keysym f = f F ordfeminine keysym backslash = backslash bar notsign brokenbar keysym semicolon = semicolon colon trademark keysym apostrophe = apostrophe quotedbl leftdoublequotemark rightdoublequotemark keysym z = z Z Greek_omega Greek_OMEGA keysym c = c C cent copyright keysym m = m M masculine mu keysym period = period greater ellipsis keysym slash = slash question questiondown [-- Attachment #3: Type: text/plain, Size: 486 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Which standard installed font displays ' and ` good 2011-03-23 17:19 ` Cecil Westerhof @ 2011-03-23 18:49 ` Pontus Lurcock 2011-03-23 19:41 ` mathew ` (2 more replies) 0 siblings, 3 replies; 15+ messages in thread From: Pontus Lurcock @ 2011-03-23 18:49 UTC (permalink / raw) To: ntg-context On Wed 23 Mar 2011, Cecil Westerhof wrote: > I have to change all my ‘quotes’ again. It's advisable to use \quote{...} or \quotation{...} for quotation marks. That way, if you do need to change them, you only do it in one place rather than throughout the document. Pont ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Which standard installed font displays ' and ` good 2011-03-23 18:49 ` Pontus Lurcock @ 2011-03-23 19:41 ` mathew 2011-03-23 20:06 ` Pontus Lurcock 2011-03-24 1:53 ` Miguel Queiros 2011-03-23 20:06 ` Cecil Westerhof 2011-03-23 20:13 ` Cecil Westerhof 2 siblings, 2 replies; 15+ messages in thread From: mathew @ 2011-03-23 19:41 UTC (permalink / raw) To: mailing list for ConTeXt users On Wed, Mar 23, 2011 at 13:49, Pontus Lurcock <pont@talvi.net> wrote: > It's advisable to use \quote{...} or \quotation{...} for quotation > marks. That way, if you do need to change them, you only do it in one > place rather than throughout the document. Now why the heck aren't those commands mentioned anywhere in "Context - An Excursion"? mathew ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Which standard installed font displays ' and ` good 2011-03-23 19:41 ` mathew @ 2011-03-23 20:06 ` Pontus Lurcock 2011-03-24 1:53 ` Miguel Queiros 1 sibling, 0 replies; 15+ messages in thread From: Pontus Lurcock @ 2011-03-23 20:06 UTC (permalink / raw) To: ntg-context On Wed 23 Mar 2011, mathew wrote: > Now why the heck aren't those commands mentioned anywhere in "Context > - An Excursion"? Not sure, but the Excursion is quite old and probably not intended to be comprehensive. They're covered in the reference manual. Pont ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Which standard installed font displays ' and ` good 2011-03-23 19:41 ` mathew 2011-03-23 20:06 ` Pontus Lurcock @ 2011-03-24 1:53 ` Miguel Queiros 1 sibling, 0 replies; 15+ messages in thread From: Miguel Queiros @ 2011-03-24 1:53 UTC (permalink / raw) To: mailing list for ConTeXt users > > It's advisable to use \quote{...} or \quotation{...} for quotation > > marks. That way, if you do need to change them, you only do it in one > > place rather than throughout the document. > > Now why the heck aren't those commands mentioned anywhere in "Context > - An Excursion"? I remembered seeing these commands somewhere, so I searched in the wiki and found them: http://wiki.contextgarden.net/Basic_Text_Formatting Miguel ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Which standard installed font displays ' and ` good 2011-03-23 18:49 ` Pontus Lurcock 2011-03-23 19:41 ` mathew @ 2011-03-23 20:06 ` Cecil Westerhof 2011-03-23 20:13 ` Cecil Westerhof 2 siblings, 0 replies; 15+ messages in thread From: Cecil Westerhof @ 2011-03-23 20:06 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 398 bytes --] 2011/3/23 Pontus Lurcock <pont@talvi.net> > On Wed 23 Mar 2011, Cecil Westerhof wrote: > > > I have to change all my ‘quotes’ again. > > It's advisable to use \quote{...} or \quotation{...} for quotation > marks. That way, if you do need to change them, you only do it in one > place rather than throughout the document. > Did not know that. Am I going to do. -- Cecil Westerhof [-- Attachment #1.2: Type: text/html, Size: 676 bytes --] [-- Attachment #2: Type: text/plain, Size: 486 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Which standard installed font displays ' and ` good 2011-03-23 18:49 ` Pontus Lurcock 2011-03-23 19:41 ` mathew 2011-03-23 20:06 ` Cecil Westerhof @ 2011-03-23 20:13 ` Cecil Westerhof 2011-03-23 20:19 ` Wolfgang Schuster 2 siblings, 1 reply; 15+ messages in thread From: Cecil Westerhof @ 2011-03-23 20:13 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 529 bytes --] 2011/3/23 Pontus Lurcock <pont@talvi.net> > > I have to change all my ‘quotes’ again. > > It's advisable to use \quote{...} or \quotation{...} for quotation > marks. That way, if you do need to change them, you only do it in one > place rather than throughout the document. > It looks like \quotation does what I want, but \quote puts the opening quote low and the wrong way around. How can I change this? I find: http://wiki.contextgarden.net/Reference/en/setupquote not very helpful. -- Cecil Westerhof [-- Attachment #1.2: Type: text/html, Size: 875 bytes --] [-- Attachment #2: Type: text/plain, Size: 486 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Which standard installed font displays ' and ` good 2011-03-23 20:13 ` Cecil Westerhof @ 2011-03-23 20:19 ` Wolfgang Schuster 2011-03-23 20:34 ` Cecil Westerhof 0 siblings, 1 reply; 15+ messages in thread From: Wolfgang Schuster @ 2011-03-23 20:19 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 698 bytes --] Am 23.03.2011 um 21:13 schrieb Cecil Westerhof: > 2011/3/23 Pontus Lurcock <pont@talvi.net> > > I have to change all my ‘quotes’ again. > > It's advisable to use \quote{...} or \quotation{...} for quotation > marks. That way, if you do need to change them, you only do it in one > place rather than throughout the document. > > It looks like \quotation does what I want, but \quote puts the opening quote low and the wrong way around. How can I change this? I find: > http://wiki.contextgarden.net/Reference/en/setupquote > not very helpful. \setuplanguage [<language>] [leftquote=..., rightquote=..., leftquotation=..., rightquotation=...] Wolfgang [-- Attachment #1.2: Type: text/html, Size: 1569 bytes --] [-- Attachment #2: Type: text/plain, Size: 486 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Which standard installed font displays ' and ` good 2011-03-23 20:19 ` Wolfgang Schuster @ 2011-03-23 20:34 ` Cecil Westerhof 0 siblings, 0 replies; 15+ messages in thread From: Cecil Westerhof @ 2011-03-23 20:34 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 647 bytes --] 2011/3/23 Wolfgang Schuster <schuster.wolfgang@googlemail.com> > It's advisable to use \quote{...} or \quotation{...} for quotation > > marks. That way, if you do need to change them, you only do it in one >> place rather than throughout the document. >> > > It looks like \quotation does what I want, but \quote puts the opening > quote low and the wrong way around. How can I change this? I find: > http://wiki.contextgarden.net/Reference/en/setupquote > not very helpful. > > > \setuplanguage > [<language>] > [leftquote=..., > rightquote=..., > leftquotation=..., > rightquotation=...] > Works. Thanks. -- Cecil Westerhof [-- Attachment #1.2: Type: text/html, Size: 1447 bytes --] [-- Attachment #2: Type: text/plain, Size: 486 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Which standard installed font displays ' and ` good 2011-03-23 16:23 Which standard installed font displays ' and ` good Cecil Westerhof 2011-03-23 16:30 ` mathew @ 2011-03-23 18:22 ` Wolfgang Schuster 2011-03-23 20:02 ` Cecil Westerhof 1 sibling, 1 reply; 15+ messages in thread From: Wolfgang Schuster @ 2011-03-23 18:22 UTC (permalink / raw) To: mailing list for ConTeXt users Am 23.03.2011 um 17:23 schrieb Cecil Westerhof: > I am still experimenting. With the default ' is reasonably displayed, but ` not. > I liked palatino, but then even ' is not displayed nicely. What is the best (standard installed) font where both ' and ` are good displayed? How do you define a standard font, the list of available differes with the used TeX distribution (TeX Live or context minimals) and your Openrating System. I made a short document with a few fonts: http://d.pr/h5tE Source: \newcounter\FontTestCounter \define[1]\FontTest {\increment\FontTestCounter \definetypeface[mainface-\FontTestCounter][rm][specserif][#1] \switchtobodyfont[mainface-\FontTestCounter] \title{#1} \startpacked ` Backtick\par ' Apostrophe\par ‘ Open curly quote\par ’ Close curly quote\par - hyphen\par – en dash\par — em dash \stoppacked \blank “Quote” and „quote“ and «more quotes»} \starttext \FontTest{Aller} … \stoptext Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Which standard installed font displays ' and ` good 2011-03-23 18:22 ` Wolfgang Schuster @ 2011-03-23 20:02 ` Cecil Westerhof 2011-03-23 20:22 ` Wolfgang Schuster 0 siblings, 1 reply; 15+ messages in thread From: Cecil Westerhof @ 2011-03-23 20:02 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 685 bytes --] 2011/3/23 Wolfgang Schuster <schuster.wolfgang@googlemail.com> > > I am still experimenting. With the default ' is reasonably displayed, but > ` not. > > I liked palatino, but then even ' is not displayed nicely. What is the > best (standard installed) font where both ' and ` are good displayed? > > > How do you define a standard font, the list of available differes with the > used TeX distribution (TeX Live or context minimals) and your Openrating > System. > I work with minimals. How do I get the list? > I made a short document with a few fonts: http://d.pr/h5tE > I choose (based on your document) ‘PT Serif’ for the moment. -- Cecil Westerhof [-- Attachment #1.2: Type: text/html, Size: 1193 bytes --] [-- Attachment #2: Type: text/plain, Size: 486 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Which standard installed font displays ' and ` good 2011-03-23 20:02 ` Cecil Westerhof @ 2011-03-23 20:22 ` Wolfgang Schuster 2011-03-23 20:40 ` Cecil Westerhof 0 siblings, 1 reply; 15+ messages in thread From: Wolfgang Schuster @ 2011-03-23 20:22 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 772 bytes --] Am 23.03.2011 um 21:02 schrieb Cecil Westerhof: > 2011/3/23 Wolfgang Schuster <schuster.wolfgang@googlemail.com> > > I am still experimenting. With the default ' is reasonably displayed, but ` not. > > I liked palatino, but then even ' is not displayed nicely. What is the best (standard installed) font where both ' and ` are good displayed? > > > How do you define a standard font, the list of available differes with the used TeX distribution (TeX Live or context minimals) and your Openrating System. > > I work with minimals. How do I get the list? Look into the fonts folders. We can make a list of the available fonts with their typescripts/typefaces and put them on the wiki. There is also a list in Hans/Tacos new fonts manual. Wolfgang [-- Attachment #1.2: Type: text/html, Size: 1481 bytes --] [-- Attachment #2: Type: text/plain, Size: 486 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
* Re: Which standard installed font displays ' and ` good 2011-03-23 20:22 ` Wolfgang Schuster @ 2011-03-23 20:40 ` Cecil Westerhof 0 siblings, 0 replies; 15+ messages in thread From: Cecil Westerhof @ 2011-03-23 20:40 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1266 bytes --] 2011/3/23 Wolfgang Schuster <schuster.wolfgang@googlemail.com> > 2011/3/23 Wolfgang Schuster <schuster.wolfgang@googlemail.com> > >> > I am still experimenting. With the default ' is reasonably displayed, >> but ` not. >> > I liked palatino, but then even ' is not displayed nicely. What is the >> best (standard installed) font where both ' and ` are good displayed? >> >> >> How do you define a standard font, the list of available differes with the >> used TeX distribution (TeX Live or context minimals) and your Openrating >> System. >> > > I work with minimals. How do I get the list? > > > Look into the fonts folders. > I suppose you mean: texmf/fonts/? There I see: drwxrwxr-x 5 cecil users 4,0K 28 jan 2008 afm drwxrwxr-x 3 cecil users 4,0K 28 jan 2008 enc drwxrwxr-x 4 cecil users 4,0K 28 jan 2008 map drwxr-xr-x 3 cecil users 4,0K 19 jan 2009 misc drwxrwxr-x 5 cecil users 4,0K 28 jan 2008 opentype drwxrwxr-x 5 cecil users 4,0K 28 jan 2008 tfm drwxrwxr-x 3 cecil users 4,0K 9 okt 12:42 truetype drwxrwxr-x 7 cecil users 4,0K 28 jan 2008 type1 drwxr-xr-x 3 cecil users 4,0K 28 jan 2009 vf > We can make a list of the available fonts with their typescripts/typefaces > and put them on the wiki. > Would be a good idea. -- Cecil Westerhof [-- Attachment #1.2: Type: text/html, Size: 2317 bytes --] [-- Attachment #2: Type: text/plain, Size: 486 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 15+ messages in thread
end of thread, other threads:[~2011-03-24 1:53 UTC | newest] Thread overview: 15+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2011-03-23 16:23 Which standard installed font displays ' and ` good Cecil Westerhof 2011-03-23 16:30 ` mathew 2011-03-23 17:19 ` Cecil Westerhof 2011-03-23 18:49 ` Pontus Lurcock 2011-03-23 19:41 ` mathew 2011-03-23 20:06 ` Pontus Lurcock 2011-03-24 1:53 ` Miguel Queiros 2011-03-23 20:06 ` Cecil Westerhof 2011-03-23 20:13 ` Cecil Westerhof 2011-03-23 20:19 ` Wolfgang Schuster 2011-03-23 20:34 ` Cecil Westerhof 2011-03-23 18:22 ` Wolfgang Schuster 2011-03-23 20:02 ` Cecil Westerhof 2011-03-23 20:22 ` Wolfgang Schuster 2011-03-23 20:40 ` Cecil Westerhof
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).