* mswincontext.zip installation
@ 2006-02-26 12:19 Jose Ignacio Marín Alberdi
2006-02-26 20:25 ` Keith McKay
2006-02-27 12:07 ` Mojca Miklavec
0 siblings, 2 replies; 9+ messages in thread
From: Jose Ignacio Marín Alberdi @ 2006-02-26 12:19 UTC (permalink / raw)
Hi all,
I am experiencing some trouble using mswincontext.zip.
I have properly installed perl and ruby as the wiki says.
(http://wiki.contextgarden.net/Windows_Installation#Stand-alone_ConTeXt_dist
ribution)
But when it comes to use cdemo.bat I got:
>texmfstart newtexexec.rb --autopdf --pdf demo-tex.tex
TeXExec | processing document 'demo-tex.tex'
TeXExec | provide ctx file
TeXExec | tex processing method: context
TeXExec | TeX run 1
TeXExec | tex engine: pdfetex
TeXExec | tex format: cont-en
TeXExec | progname: context
This is pdfeTeX, Version 3.141592-1.30.3-2.2 (Web2c 7.5.5)
\write18 enabled.
I can't find the format file `cont-en.fmt'!
TeXExec | runtime: 2.594
>Exit code: 0
I thought this was a "click and go" package installation. I guess I have to
do some format creation and all that, but I have nothing TeXy installed
(just the mswincontext.zip). What do I need?
Thanks in advance,
jima
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: mswincontext.zip installation
2006-02-26 12:19 mswincontext.zip installation Jose Ignacio Marín Alberdi
@ 2006-02-26 20:25 ` Keith McKay
2006-02-27 12:07 ` Mojca Miklavec
1 sibling, 0 replies; 9+ messages in thread
From: Keith McKay @ 2006-02-26 20:25 UTC (permalink / raw)
I get exactly the same problem today. I decided to install the latest
mswincontext.zip since I hadn't updated for some time. I've never been sure
of the update process so I thought this would be the best thing to do.
Luckily I still have a an old versine which I installed and worked fine.
It's dated 23 september 2005. I have to say I would prefer the most
uptodate version with respect to bug fixes etc..
Thanks
Keith
-----Original Message-----
From: ntg-context-bounces@ntg.nl [mailto:ntg-context-bounces@ntg.nl] On
Behalf Of Jose Ignacio Marín Alberdi
Sent: 26 February 2006 12:19
To: ntg-context@ntg.nl
Subject: [NTG-context] mswincontext.zip installation
Hi all,
I am experiencing some trouble using mswincontext.zip.
I have properly installed perl and ruby as the wiki says.
(http://wiki.contextgarden.net/Windows_Installation#Stand-alone_ConTeXt_dist
ribution)
But when it comes to use cdemo.bat I got:
>texmfstart newtexexec.rb --autopdf --pdf demo-tex.tex
TeXExec | processing document 'demo-tex.tex'
TeXExec | provide ctx file
TeXExec | tex processing method: context
TeXExec | TeX run 1
TeXExec | tex engine: pdfetex
TeXExec | tex format: cont-en
TeXExec | progname: context
This is pdfeTeX, Version 3.141592-1.30.3-2.2 (Web2c 7.5.5) \write18
enabled. I can't find the format file `cont-en.fmt'! TeXExec | runtime:
2.594
>Exit code: 0
I thought this was a "click and go" package installation. I guess I have to
do some format creation and all that, but I have nothing TeXy installed
(just the mswincontext.zip). What do I need?
Thanks in advance,
jima
_______________________________________________
ntg-context mailing list
ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 268.1.0/269 - Release Date: 24/02/2006
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 268.1.0/269 - Release Date: 24/02/2006
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: mswincontext.zip installation
2006-02-26 12:19 mswincontext.zip installation Jose Ignacio Marín Alberdi
2006-02-26 20:25 ` Keith McKay
@ 2006-02-27 12:07 ` Mojca Miklavec
2006-02-27 21:58 ` Jose Ignacio Marín Alberdi
1 sibling, 1 reply; 9+ messages in thread
From: Mojca Miklavec @ 2006-02-27 12:07 UTC (permalink / raw)
Jose Ignacio Marín Alberdi wrote:
> Hi all,
>
> I am experiencing some trouble using mswincontext.zip.
>
> I have properly installed perl and ruby as the wiki says.
>
> (http://wiki.contextgarden.net/Windows_Installation#Stand-alone_ConTeXt_dist
> ribution)
>
> But when it comes to use cdemo.bat I got:
>
> >texmfstart newtexexec.rb --autopdf --pdf demo-tex.tex
> TeXExec | processing document 'demo-tex.tex'
> TeXExec | provide ctx file
> TeXExec | tex processing method: context
> TeXExec | TeX run 1
> TeXExec | tex engine: pdfetex
> TeXExec | tex format: cont-en
> TeXExec | progname: context
> This is pdfeTeX, Version 3.141592-1.30.3-2.2 (Web2c 7.5.5)
> \write18 enabled.
> I can't find the format file `cont-en.fmt'!
> TeXExec | runtime: 2.594
> >Exit code: 0
>
>
> I thought this was a "click and go" package installation. I guess I have to
> do some format creation and all that, but I have nothing TeXy installed
> (just the mswincontext.zip). What do I need?
Sorry, this step is missing on Wiki (forgotten).
Can you try the following:
Open command line (Start->Run->cmd) and do either a) or b):
a) "cd" to directory where cdemo.bat resides, execute it and exit
(this will set the path for you)
b) execute (this should be in one line):
C:\Programs\context\usr\local\context\tex\setuptex.bat
C:\Programs\context\usr\local\context\tex
(change "C:\Programs\context" to the proper folder)
Then execute
texexec --make --all
The last one is the crucial step for making formats.
Perhaps "making formats" should be present in menu in Scite (perhaps
it already is, I can't check from here).
Mojca
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: mswincontext.zip installation
2006-02-27 12:07 ` Mojca Miklavec
@ 2006-02-27 21:58 ` Jose Ignacio Marín Alberdi
2006-02-28 9:12 ` Hans Hagen
2006-02-28 18:48 ` Keith McKay
0 siblings, 2 replies; 9+ messages in thread
From: Jose Ignacio Marín Alberdi @ 2006-02-27 21:58 UTC (permalink / raw)
Hi,
thanks ! that did it for me...
I did (a) and then (b) :)
Here is the sequence I used (assuming C:\Programs\context)
Start->Run->cmd
cd C:\Programs\context
cdemo.bat
Then I closed the SciTe thing but I remained in the cmd.
Then, in one line as Mojca says:
C:\Programs\context\usr\local\context\tex\setuptex.bat
C:\Programs\context\usr\local\context\tex
And
texexec --make --all
Then I closed the cmd, started by double click the cdemo.bat and voila !
Thanks !
jima
-----Mensaje original-----
De: ntg-context-bounces@ntg.nl [mailto:ntg-context-bounces@ntg.nl]En
nombre de Mojca Miklavec
Enviado el: lunes, 27 de febrero de 2006 13:08
Para: mailing list for ConTeXt users
Asunto: Re: [NTG-context] mswincontext.zip installation
Jose Ignacio Marín Alberdi wrote:
> Hi all,
>
> I am experiencing some trouble using mswincontext.zip.
>
> I have properly installed perl and ruby as the wiki says.
>
>
(http://wiki.contextgarden.net/Windows_Installation#Stand-alone_ConTeXt_dist
> ribution)
>
> But when it comes to use cdemo.bat I got:
>
> >texmfstart newtexexec.rb --autopdf --pdf demo-tex.tex
> TeXExec | processing document 'demo-tex.tex'
> TeXExec | provide ctx file
> TeXExec | tex processing method: context
> TeXExec | TeX run 1
> TeXExec | tex engine: pdfetex
> TeXExec | tex format: cont-en
> TeXExec | progname: context
> This is pdfeTeX, Version 3.141592-1.30.3-2.2 (Web2c 7.5.5)
> \write18 enabled.
> I can't find the format file `cont-en.fmt'!
> TeXExec | runtime: 2.594
> >Exit code: 0
>
>
> I thought this was a "click and go" package installation. I guess I have
to
> do some format creation and all that, but I have nothing TeXy installed
> (just the mswincontext.zip). What do I need?
Sorry, this step is missing on Wiki (forgotten).
Can you try the following:
Open command line (Start->Run->cmd) and do either a) or b):
a) "cd" to directory where cdemo.bat resides, execute it and exit
(this will set the path for you)
b) execute (this should be in one line):
C:\Programs\context\usr\local\context\tex\setuptex.bat
C:\Programs\context\usr\local\context\tex
(change "C:\Programs\context" to the proper folder)
Then execute
texexec --make --all
The last one is the crucial step for making formats.
Perhaps "making formats" should be present in menu in Scite (perhaps
it already is, I can't check from here).
Mojca
_______________________________________________
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: mswincontext.zip installation
2006-02-27 21:58 ` Jose Ignacio Marín Alberdi
@ 2006-02-28 9:12 ` Hans Hagen
2006-02-28 18:48 ` Keith McKay
1 sibling, 0 replies; 9+ messages in thread
From: Hans Hagen @ 2006-02-28 9:12 UTC (permalink / raw)
� wrote:
> Hi,
>
> thanks ! that did it for me...
>
> I did (a) and then (b) :)
>
> Here is the sequence I used (assuming C:\Programs\context)
>
> Start->Run->cmd
> cd C:\Programs\context
> cdemo.bat
>
> Then I closed the SciTe thing but I remained in the cmd.
>
> Then, in one line as Mojca says:
> C:\Programs\context\usr\local\context\tex\setuptex.bat
> C:\Programs\context\usr\local\context\tex
>
> And
> texexec --make --all
>
> Then I closed the cmd, started by double click the cdemo.bat and voila !
>
there is also a colsole in scite itself (just key in texexec --make --all in the log pane)
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
_______________________________________________
ntg-context mailing list
ntg-context@ntg.nl
http://www.ntg.nl/mailman/listinfo/ntg-context
^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: mswincontext.zip installation
2006-02-27 21:58 ` Jose Ignacio Marín Alberdi
2006-02-28 9:12 ` Hans Hagen
@ 2006-02-28 18:48 ` Keith McKay
2006-03-07 11:49 ` Geert Stappers
1 sibling, 1 reply; 9+ messages in thread
From: Keith McKay @ 2006-02-28 18:48 UTC (permalink / raw)
And me to! Thanks!
Would some kind soul care to write up on the Wiki the best way to update the
windows stand alone version? Please.
Keith
-----Original Message-----
From: ntg-context-bounces@ntg.nl [mailto:ntg-context-bounces@ntg.nl] On
Behalf Of Jose Ignacio Marín Alberdi
Sent: 27 February 2006 21:58
To: mailing list for ConTeXt users
Subject: Re: [NTG-context] mswincontext.zip installation
Hi,
thanks ! that did it for me...
I did (a) and then (b) :)
Here is the sequence I used (assuming C:\Programs\context)
Start->Run->cmd
cd C:\Programs\context
cdemo.bat
Then I closed the SciTe thing but I remained in the cmd.
Then, in one line as Mojca says:
C:\Programs\context\usr\local\context\tex\setuptex.bat
C:\Programs\context\usr\local\context\tex
And
texexec --make --all
Then I closed the cmd, started by double click the cdemo.bat and voila !
Thanks !
jima
-----Mensaje original-----
De: ntg-context-bounces@ntg.nl [mailto:ntg-context-bounces@ntg.nl]En
nombre de Mojca Miklavec
Enviado el: lunes, 27 de febrero de 2006 13:08
Para: mailing list for ConTeXt users
Asunto: Re: [NTG-context] mswincontext.zip installation
Jose Ignacio Marín Alberdi wrote:
> Hi all,
>
> I am experiencing some trouble using mswincontext.zip.
>
> I have properly installed perl and ruby as the wiki says.
>
>
(http://wiki.contextgarden.net/Windows_Installation#Stand-alone_ConTeXt_dist
> ribution)
>
> But when it comes to use cdemo.bat I got:
>
> >texmfstart newtexexec.rb --autopdf --pdf demo-tex.tex
> TeXExec | processing document 'demo-tex.tex'
> TeXExec | provide ctx file
> TeXExec | tex processing method: context
> TeXExec | TeX run 1
> TeXExec | tex engine: pdfetex
> TeXExec | tex format: cont-en
> TeXExec | progname: context
> This is pdfeTeX, Version 3.141592-1.30.3-2.2 (Web2c 7.5.5) \write18
> enabled. I can't find the format file `cont-en.fmt'!
> TeXExec | runtime: 2.594
> >Exit code: 0
>
>
> I thought this was a "click and go" package installation. I guess I
> have
to
> do some format creation and all that, but I have nothing TeXy
> installed (just the mswincontext.zip). What do I need?
Sorry, this step is missing on Wiki (forgotten).
Can you try the following:
Open command line (Start->Run->cmd) and do either a) or b):
a) "cd" to directory where cdemo.bat resides, execute it and exit (this will
set the path for you)
b) execute (this should be in one line):
C:\Programs\context\usr\local\context\tex\setuptex.bat
C:\Programs\context\usr\local\context\tex
(change "C:\Programs\context" to the proper folder)
Then execute
texexec --make --all
The last one is the crucial step for making formats.
Perhaps "making formats" should be present in menu in Scite (perhaps it
already is, I can't check from here).
Mojca
_______________________________________________
ntg-context mailing list
ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
_______________________________________________
ntg-context mailing list
ntg-context@ntg.nl http://www.ntg.nl/mailman/listinfo/ntg-context
--
No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 268.1.1/270 - Release Date: 27/02/2006
--
No virus found in this outgoing message.
Checked by AVG Free Edition.
Version: 7.1.375 / Virus Database: 268.1.1/270 - Release Date: 27/02/2006
^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2006-03-07 20:49 UTC | newest]
Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-02-26 12:19 mswincontext.zip installation Jose Ignacio Marín Alberdi
2006-02-26 20:25 ` Keith McKay
2006-02-27 12:07 ` Mojca Miklavec
2006-02-27 21:58 ` Jose Ignacio Marín Alberdi
2006-02-28 9:12 ` Hans Hagen
2006-02-28 18:48 ` Keith McKay
2006-03-07 11:49 ` Geert Stappers
2006-03-07 15:30 ` jimarin
2006-03-07 20:49 ` Jose Ignacio Marín Alberdi
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).