* Trouble with new update
@ 2006-05-11 18:50 Aditya Mahajan
2006-05-11 18:54 ` Hans Hagen
` (2 more replies)
0 siblings, 3 replies; 16+ messages in thread
From: Aditya Mahajan @ 2006-05-11 18:50 UTC (permalink / raw)
I just now did a fresh install of 2006.05.11 10:30 (i.e. removed my
old installation, downloaded mswincontext, did ctxtools --update) and
now I get error messages
systems : begin file test at line 1
fonts : resetting map file list
fonts : using map file: original-base
fonts : using map file: ec-public-lm
fonts : using map file: ec-base
fonts : using map file: original-ams-base
fonts : using map file: original-ams-euler
fonts : using map file: original-public-lm
(e:\isoimage\usr\local\context\tex\texmf-local/tex/context/base/pdfr-ec.tex)
[1.1
Warning: pdfetex.exe (file original-empty.map): cannot open font map
file
Warning: pdfetex.exe (file original-base.map): cannot open font map
file
Warning: pdfetex.exe (file ec-public-lm.map): cannot open font map
file
Warning: pdfetex.exe (file ec-base.map): cannot open font map file
Warning: pdfetex.exe (file original-ams-base.map): cannot open font
map file
Warning: pdfetex.exe (file original-ams-euler.map): cannot open font
map file
Warning: pdfetex.exe (file original-public-lm.map): cannot open font
map file
]
systems : end file test at line 5
)
The files are present in the system, have permission 755, I do not
know what is going wrong. I have tried, but of no avail.
Aditya
--
Aditya Mahajan, EECS Systems, University of Michigan
http://www.eecs.umich.edu/~adityam || Ph: 7342624008
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Trouble with new update
2006-05-11 18:50 Trouble with new update Aditya Mahajan
@ 2006-05-11 18:54 ` Hans Hagen
2006-05-11 19:05 ` Aditya Mahajan
2006-05-11 19:08 ` Thomas A. Schmitz
2006-05-17 16:25 ` pdfetex cannot find map files Aditya Mahajan
2 siblings, 1 reply; 16+ messages in thread
From: Hans Hagen @ 2006-05-11 18:54 UTC (permalink / raw)
Aditya Mahajan wrote:
> I just now did a fresh install of 2006.05.11 10:30 (i.e. removed my
> old installation, downloaded mswincontext, did ctxtools --update) and
> now I get error messages
>
> systems : begin file test at line 1
> fonts : resetting map file list
> fonts : using map file: original-base
> fonts : using map file: ec-public-lm
> fonts : using map file: ec-base
> fonts : using map file: original-ams-base
> fonts : using map file: original-ams-euler
> fonts : using map file: original-public-lm
> (e:\isoimage\usr\local\context\tex\texmf-local/tex/context/base/pdfr-ec.tex)
> [1.1
> Warning: pdfetex.exe (file original-empty.map): cannot open font map
> file
>
> Warning: pdfetex.exe (file original-base.map): cannot open font map
> file
>
> Warning: pdfetex.exe (file ec-public-lm.map): cannot open font map
> file
>
> Warning: pdfetex.exe (file ec-base.map): cannot open font map file
>
> Warning: pdfetex.exe (file original-ams-base.map): cannot open font
> map file
>
> Warning: pdfetex.exe (file original-ams-euler.map): cannot open font
> map file
>
> Warning: pdfetex.exe (file original-public-lm.map): cannot open font
> map file
> ]
> systems : end file test at line 5
> )
>
> The files are present in the system, have permission 755, I do not
> know what is going wrong. I have tried, but of no avail.
>
can you check your map file path? because we need to support dvipdfmx there can be a mix up
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Trouble with new update
2006-05-11 18:54 ` Hans Hagen
@ 2006-05-11 19:05 ` Aditya Mahajan
2006-05-11 20:10 ` Hans Hagen
0 siblings, 1 reply; 16+ messages in thread
From: Aditya Mahajan @ 2006-05-11 19:05 UTC (permalink / raw)
On Thu, 11 May 2006, Hans Hagen wrote:
> Aditya Mahajan wrote:
>> I just now did a fresh install of 2006.05.11 10:30 (i.e. removed my
>> old installation, downloaded mswincontext, did ctxtools --update) and
>> now I get error messages
>>
>> systems : begin file test at line 1
>> fonts : resetting map file list
>> fonts : using map file: original-base
>> fonts : using map file: ec-public-lm
>> fonts : using map file: ec-base
>> fonts : using map file: original-ams-base
>> fonts : using map file: original-ams-euler
>> fonts : using map file: original-public-lm
>> (e:\isoimage\usr\local\context\tex\texmf-local/tex/context/base/pdfr-ec.tex)
>> [1.1
>> Warning: pdfetex.exe (file original-empty.map): cannot open font map
>> file
>>
>> Warning: pdfetex.exe (file original-base.map): cannot open font map
>> file
>>
>> Warning: pdfetex.exe (file ec-public-lm.map): cannot open font map
>> file
>>
>> Warning: pdfetex.exe (file ec-base.map): cannot open font map file
>>
>> Warning: pdfetex.exe (file original-ams-base.map): cannot open font
>> map file
>>
>> Warning: pdfetex.exe (file original-ams-euler.map): cannot open font
>> map file
>>
>> Warning: pdfetex.exe (file original-public-lm.map): cannot open font
>> map file
>> ]
>> systems : end file test at line 5
>> )
>>
>> The files are present in the system, have permission 755, I do not
>> know what is going wrong. I have tried, but of no avail.
>>
> can you check your map file path? because we need to support dvipdfmx there can be a mix up
fonts/map/dvipdfm/lm
fonts/map/dvips/lm
fonts/map/pdfetex/lm
are empty!
The map files that are present
./fonts/map/dvipdfm/context:
8r-base.map
ec-base.map
ec-os-public-lm.map
ec-public-lm.map
el-public-lm.map
original-adobe-euro.map
original-ams-base.map
original-ams-cmr.map
original-ams-euler.map
original-base.map
original-context-symbol.map
original-dummy.map
original-empty.map
original-micropress-informal.map
original-public-csr.map
original-public-lm.map
original-public-plr.map
original-public-vnr.map
original-vogel-symbol.map
original-wasy.map
original-youngryu-px.map
original-youngryu-tx.map
qx-base.map
qx-os-public-lm.map
qx-public-lm.map
t5-base.map
t5-os-public-lm.map
t5-public-lm.map
texnansi-base.map
texnansi-os-public-lm.map
texnansi-public-lm.map
./fonts/map/dvips/context:
ec-lm.map
el-lm.map
qx-lm.map
t5-lm.map
texnansi-lm.map
ts1-lm.map
./fonts/map/pdftex/context:
8r-base.map
ec-base.map
ec-os-public-lm.map
ec-public-lm.map
el-public-lm.map
original-adobe-euro.map
original-ams-base.map
original-ams-cmr.map
original-ams-euler.map
original-base.map
original-context-symbol.map
original-dummy.map
original-empty.map
original-micropress-informal.map
original-public-csr.map
original-public-lm.map
original-public-plr.map
original-public-vnr.map
original-vogel-symbol.map
original-wasy.map
original-youngryu-px.map
original-youngryu-tx.map
qx-base.map
qx-os-public-lm.map
qx-public-lm.map
t5-base.map
t5-os-public-lm.map
t5-public-lm.map
texnansi-base.map
texnansi-os-public-lm.map
--
Aditya Mahajan, EECS Systems, University of Michigan
http://www.eecs.umich.edu/~adityam || Ph: 7342624008
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Trouble with new update
2006-05-11 18:50 Trouble with new update Aditya Mahajan
2006-05-11 18:54 ` Hans Hagen
@ 2006-05-11 19:08 ` Thomas A. Schmitz
2006-05-11 19:11 ` Aditya Mahajan
2006-05-17 16:25 ` pdfetex cannot find map files Aditya Mahajan
2 siblings, 1 reply; 16+ messages in thread
From: Thomas A. Schmitz @ 2006-05-11 19:08 UTC (permalink / raw)
Are you just getting these messages and compilation proceeds
normally? If that's the case, this is just the normal behavior of
texexec (I think Taco once wrote that it was a bit paranoid about
such files) and you should learn to ignore them... I get dozens of
them at every run.
HTH
Thomas
On May 11, 2006, at 8:50 PM, Aditya Mahajan wrote:
> I just now did a fresh install of 2006.05.11 10:30 (i.e. removed my
> old installation, downloaded mswincontext, did ctxtools --update) and
> now I get error messages
>
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Trouble with new update
2006-05-11 19:08 ` Thomas A. Schmitz
@ 2006-05-11 19:11 ` Aditya Mahajan
0 siblings, 0 replies; 16+ messages in thread
From: Aditya Mahajan @ 2006-05-11 19:11 UTC (permalink / raw)
On Thu, 11 May 2006, Thomas A. Schmitz wrote:
> Are you just getting these messages and compilation proceeds
> normally? If that's the case, this is just the normal behavior of
> texexec (I think Taco once wrote that it was a bit paranoid about
> such files) and you should learn to ignore them... I get dozens of
> them at every run.
>
The fonts are not embedded in the pdf. When I open the pdf, I get a
message "Could not find fonts in the resource library -- Using
Helevetica instead".
Aditya
>
> On May 11, 2006, at 8:50 PM, Aditya Mahajan wrote:
>
>> I just now did a fresh install of 2006.05.11 10:30 (i.e. removed my
>> old installation, downloaded mswincontext, did ctxtools --update) and
>> now I get error messages
>>
>
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
>
>
>
--
Aditya Mahajan, EECS Systems, University of Michigan
http://www.eecs.umich.edu/~adityam || Ph: 7342624008
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Trouble with new update
2006-05-11 19:05 ` Aditya Mahajan
@ 2006-05-11 20:10 ` Hans Hagen
2006-05-11 21:38 ` Aditya Mahajan
0 siblings, 1 reply; 16+ messages in thread
From: Hans Hagen @ 2006-05-11 20:10 UTC (permalink / raw)
Aditya Mahajan wrote:
> On Thu, 11 May 2006, Hans Hagen wrote:
>
>
>> Aditya Mahajan wrote:
>>
>>> I just now did a fresh install of 2006.05.11 10:30 (i.e. removed my
>>> old installation, downloaded mswincontext, did ctxtools --update) and
>>> now I get error messages
>>>
>>> systems : begin file test at line 1
>>> fonts : resetting map file list
>>> fonts : using map file: original-base
>>> fonts : using map file: ec-public-lm
>>> fonts : using map file: ec-base
>>> fonts : using map file: original-ams-base
>>> fonts : using map file: original-ams-euler
>>> fonts : using map file: original-public-lm
>>> (e:\isoimage\usr\local\context\tex\texmf-local/tex/context/base/pdfr-ec.tex)
>>> [1.1
>>> Warning: pdfetex.exe (file original-empty.map): cannot open font map
>>> file
>>>
>>> Warning: pdfetex.exe (file original-base.map): cannot open font map
>>> file
>>>
>>> Warning: pdfetex.exe (file ec-public-lm.map): cannot open font map
>>> file
>>>
>>> Warning: pdfetex.exe (file ec-base.map): cannot open font map file
>>>
>>> Warning: pdfetex.exe (file original-ams-base.map): cannot open font
>>> map file
>>>
>>> Warning: pdfetex.exe (file original-ams-euler.map): cannot open font
>>> map file
>>>
>>> Warning: pdfetex.exe (file original-public-lm.map): cannot open font
>>> map file
>>> ]
>>> systems : end file test at line 5
>>> )
>>>
>>> The files are present in the system, have permission 755, I do not
>>> know what is going wrong. I have tried, but of no avail.
>>>
>>>
>> can you check your map file path? because we need to support dvipdfmx there can be a mix up
>>
>
> fonts/map/dvipdfm/lm
> fonts/map/dvips/lm
> fonts/map/pdfetex/lm
>
TEXFONTMAPS =
.;$TEXMF/fonts/map/{$progname,pdftex,dvips,}//;$TEXMF/{$progname,pdftex,dvips}/{config,}//
should be in texmf.cnf
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: Trouble with new update
2006-05-11 20:10 ` Hans Hagen
@ 2006-05-11 21:38 ` Aditya Mahajan
0 siblings, 0 replies; 16+ messages in thread
From: Aditya Mahajan @ 2006-05-11 21:38 UTC (permalink / raw)
On Thu, 11 May 2006, Hans Hagen wrote:
> Aditya Mahajan wrote:
>> On Thu, 11 May 2006, Hans Hagen wrote:
>>
>>
>>> Aditya Mahajan wrote:
>>>
>>>> I just now did a fresh install of 2006.05.11 10:30 (i.e. removed my
>>>> old installation, downloaded mswincontext, did ctxtools --update) and
>>>> now I get error messages
>>>>
>>>> systems : begin file test at line 1
>>>> fonts : resetting map file list
>>>> fonts : using map file: original-base
>>>> fonts : using map file: ec-public-lm
>>>> fonts : using map file: ec-base
>>>> fonts : using map file: original-ams-base
>>>> fonts : using map file: original-ams-euler
>>>> fonts : using map file: original-public-lm
>>>> (e:\isoimage\usr\local\context\tex\texmf-local/tex/context/base/pdfr-ec.tex)
>>>> [1.1
>>>> Warning: pdfetex.exe (file original-empty.map): cannot open font map
>>>> file
>>> can you check your map file path? because we need to support dvipdfmx there can be a mix up
>> fonts/map/dvipdfm/lm
>> fonts/map/dvips/lm
>> fonts/map/pdfetex/lm
>>
>
> TEXFONTMAPS =
> .;$TEXMF/fonts/map/{$progname,pdftex,dvips,}//;$TEXMF/{$progname,pdftex,dvips}/{config,}//
>
> should be in texmf.cnf
It wasn't. I had
TEXFONTMAPS = .;$TEXMF/fonts/map/{$progname,pdftex,dvips,}//
I added .../{config,}, but there is no $TEXMF/pdftex or $TEXMF/dvips
directory in any of the texmf trees! I still get the same error as
before.
Running in verbose mode, I get
:kpathsea: Running mktexpk --mfmode / --bdpi 600 --mag 1+0/600 --dpi
600 ec-lmr12
kpathsea: Appending font creation commands to missfont.log.
I do not understand why pk fonts are being used. I am creating a pdf.
Does one need to download type-1 version of latin modern from ctan to
use the stand alone context?
Also, mktexpk is not in the path. It does not come with the windows
binaries for context.
Aditya
--
Aditya Mahajan, EECS Systems, University of Michigan
http://www.eecs.umich.edu/~adityam || Ph: 7342624008
^ permalink raw reply [flat|nested] 16+ messages in thread
* pdfetex cannot find map files
2006-05-11 18:50 Trouble with new update Aditya Mahajan
2006-05-11 18:54 ` Hans Hagen
2006-05-11 19:08 ` Thomas A. Schmitz
@ 2006-05-17 16:25 ` Aditya Mahajan
2006-05-17 16:34 ` Taco Hoekwater
2006-05-17 16:34 ` Hans Hagen
2 siblings, 2 replies; 16+ messages in thread
From: Aditya Mahajan @ 2006-05-17 16:25 UTC (permalink / raw)
The problem of "cannot open font map file" is still there. I deleted
all existing context trees from my computer and downloaded the
mswincontext.zip (dt. 2006-05-17) from Pragma's website. When I run a
simple
\starttext Hello World \stoptext
file, I get
----------------------
[1.1
Warning: pdfetex.exe (file original-empty.map): cannot open font map
file
Warning: pdfetex.exe (file original-base.map): cannot open font map
file
Warning: pdfetex.exe (file ec-public-lm.map): cannot open font map
file
Warning: pdfetex.exe (file ec-base.map): cannot open font map file
Warning: pdfetex.exe (file original-ams-base.map): cannot open font
map file
Warning: pdfetex.exe (file original-ams-euler.map): cannot open font
map file
Warning: pdfetex.exe (file original-public-lm.map): cannot open font
map file
]
systems : end file test1 at line 3
)
Warning: pdfetex.exe (file ec-lmr12): Font ec-lmr12 at 600 not found
------------------------
The resulting pdf has no embedded fonts.
All these map files are located in texmf-local/fonts/map/pdftex/context/
I checked the texmf.cnf at texmf-local/web2c and it says
------------------------------
% fonts, for the moment we also support the old enc/map locations
OSFONTDIR =
TEXPSHEADERS =
.;$TEXMF/{fonts/{enc,map,type1,truetype},dvips,pdftex,tex}//;$TEXMF/{etex,tex,pdftex,dvips,fonts/type1}//
TEXFONTMAPS.dvipdfm = .;$TEXMF/fonts/map/{dvipdfm,dvips,}//
TEXFONTMAPS.dvipdfmx = .;$TEXMF/fonts/map/{dvipdfm,dvips,}//
TEXFONTMAPS.pdftex = .;$TEXMF/fonts/map/{pdftex,dvips,}//
TEXFONTMAPS.pdfetex = .;$TEXMF/fonts/map/{pdftex,dvips,}//
TEXFONTMAPS.xetex = .;$TEXMF/fonts/map/{xetex,pdftex,dvips,}//
TEXFONTMAPS.dvips = .;$TEXMF/fonts/map/{dvips,pdftex,}//
# TEXFONTMAPS =
.;$TEXMF/fonts/map/{$backend,pdftex,dvips,}//;$TEXMF/{$progname,pdftex,dvips}/{config,}//
TEXFONTMAPS =
.;$TEXMF/fonts/map/{$progname,pdftex,dvips,}//;$TEXMF/{$progname,pdftex,dvips}/{config,}//
----------------------------------------
Aditya
--
Aditya Mahajan, EECS Systems, University of Michigan
http://www.eecs.umich.edu/~adityam || Ph: 7342624008
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: pdfetex cannot find map files
2006-05-17 16:25 ` pdfetex cannot find map files Aditya Mahajan
@ 2006-05-17 16:34 ` Taco Hoekwater
2006-05-17 16:34 ` Hans Hagen
1 sibling, 0 replies; 16+ messages in thread
From: Taco Hoekwater @ 2006-05-17 16:34 UTC (permalink / raw)
Aditya Mahajan wrote:
>
> All these map files are located in texmf-local/fonts/map/pdftex/context/
Sounds good
> TEXFONTMAPS.pdftex = .;$TEXMF/fonts/map/{pdftex,dvips,}//
> TEXFONTMAPS.pdfetex = .;$TEXMF/fonts/map/{pdftex,dvips,}//
> TEXFONTMAPS =
> .;$TEXMF/fonts/map/{$progname,pdftex,dvips,}//;$TEXMF/{$progname,pdftex,dvips}/{config,}//
All three lines look fine to me as well.
Tentative conclusion: this texmf.cnf is not used or overruled elsewhere.
Perhaps there is a prior problem (running setuptex failed)?
Cheers, Taco
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: pdfetex cannot find map files
2006-05-17 16:25 ` pdfetex cannot find map files Aditya Mahajan
2006-05-17 16:34 ` Taco Hoekwater
@ 2006-05-17 16:34 ` Hans Hagen
2006-05-17 16:59 ` Aditya Mahajan
1 sibling, 1 reply; 16+ messages in thread
From: Hans Hagen @ 2006-05-17 16:34 UTC (permalink / raw)
Aditya Mahajan wrote:
> The problem of "cannot open font map file" is still there. I deleted
> all existing context trees from my computer and downloaded the
> mswincontext.zip (dt. 2006-05-17) from Pragma's website. When I run a
> simple
> \starttext Hello World \stoptext
> file, I get
> ----------------------
> [1.1
> Warning: pdfetex.exe (file original-empty.map): cannot open font map
> file
>
> Warning: pdfetex.exe (file original-base.map): cannot open font map
> file
>
> Warning: pdfetex.exe (file ec-public-lm.map): cannot open font map
> file
>
> Warning: pdfetex.exe (file ec-base.map): cannot open font map file
>
> Warning: pdfetex.exe (file original-ams-base.map): cannot open font
> map file
>
> Warning: pdfetex.exe (file original-ams-euler.map): cannot open font
> map file
>
> Warning: pdfetex.exe (file original-public-lm.map): cannot open font
> map file
> ]
> systems : end file test1 at line 3
> )
> Warning: pdfetex.exe (file ec-lmr12): Font ec-lmr12 at 600 not found
> ------------------------
>
> The resulting pdf has no embedded fonts.
>
> All these map files are located in texmf-local/fonts/map/pdftex/context/
> I checked the texmf.cnf at texmf-local/web2c and it says
>
here i get for
\starttext test \stoptext:
(f:\minimal\isoimage\usr\local\context\tex\texmf-local/tex/context/base/pdfr-ec
.tex)
[1.1{f:\minimal\isoimage\usr\local\context\tex\texmf-local/fonts/map/pdft
ex/context/original-empty.map}{f:\minimal\isoimage\usr\local\context\tex\texmf-
local/fonts/map/pdftex/context/original-base.map}{f:\minimal\isoimage\usr\local
\context\tex\texmf-local/fonts/map/pdftex/context/ec-public-lm.map}{f:\minimal\
isoimage\usr\local\context\tex\texmf-local/fonts/map/pdftex/context/ec-base.map
}{f:\minimal\isoimage\usr\local\context\tex\texmf-local/fonts/map/pdftex/contex
t/original-ams-base.map}{f:\minimal\isoimage\usr\local\context\tex\texmf-local/
fonts/map/pdftex/context/original-ams-euler.map}{f:\minimal\isoimage\usr\local\
context\tex\texmf-local/fonts/map/pdftex/context/original-public-lm.map}]
systems : end file test at line 3
){f:\minimal\isoimage\usr\local\context\tex\texmf/fonts/enc/dvips/lm/lm-ec.enc
}<f:\minimal\isoimage\usr\local\context\tex\texmf/fonts/type1/public/lm/lmr12.p
fb>
Output written on test.pdf (1 page, 23324 bytes).
did you run setuptex.bat beforehand?
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: pdfetex cannot find map files
2006-05-17 16:34 ` Hans Hagen
@ 2006-05-17 16:59 ` Aditya Mahajan
2006-05-17 17:25 ` Aditya Mahajan
2006-05-17 20:22 ` Hans Hagen
0 siblings, 2 replies; 16+ messages in thread
From: Aditya Mahajan @ 2006-05-17 16:59 UTC (permalink / raw)
On Wed, 17 May 2006, Hans Hagen wrote:
> Aditya Mahajan wrote:
>> The problem of "cannot open font map file" is still there. I deleted
>> all existing context trees from my computer and downloaded the
>> mswincontext.zip (dt. 2006-05-17) from Pragma's website. When I run a
>> simple
>> \starttext Hello World \stoptext
>> file, I get
>> ----------------------
>> [1.1
>> Warning: pdfetex.exe (file original-empty.map): cannot open font map
>> file
>>
>> Warning: pdfetex.exe (file original-base.map): cannot open font map
>> file
>>
>> Warning: pdfetex.exe (file ec-public-lm.map): cannot open font map
>> file
>>
>> Warning: pdfetex.exe (file ec-base.map): cannot open font map file
>>
>> Warning: pdfetex.exe (file original-ams-base.map): cannot open font
>> map file
>>
>> Warning: pdfetex.exe (file original-ams-euler.map): cannot open font
>> map file
>>
>> Warning: pdfetex.exe (file original-public-lm.map): cannot open font
>> map file
>> ]
>> systems : end file test1 at line 3
>> )
>> Warning: pdfetex.exe (file ec-lmr12): Font ec-lmr12 at 600 not found
>> ------------------------
>>
>> The resulting pdf has no embedded fonts.
>>
>> All these map files are located in texmf-local/fonts/map/pdftex/context/
>> I checked the texmf.cnf at texmf-local/web2c and it says
>>
> here i get for
>
> \starttext test \stoptext:
>
> (f:\minimal\isoimage\usr\local\context\tex\texmf-local/tex/context/base/pdfr-ec
> .tex)
> [1.1{f:\minimal\isoimage\usr\local\context\tex\texmf-local/fonts/map/pdft
> ex/context/original-empty.map}{f:\minimal\isoimage\usr\local\context\tex\texmf-
> local/fonts/map/pdftex/context/original-base.map}{f:\minimal\isoimage\usr\local
> \context\tex\texmf-local/fonts/map/pdftex/context/ec-public-lm.map}{f:\minimal\
> isoimage\usr\local\context\tex\texmf-local/fonts/map/pdftex/context/ec-base.map
> }{f:\minimal\isoimage\usr\local\context\tex\texmf-local/fonts/map/pdftex/contex
> t/original-ams-base.map}{f:\minimal\isoimage\usr\local\context\tex\texmf-local/
> fonts/map/pdftex/context/original-ams-euler.map}{f:\minimal\isoimage\usr\local\
> context\tex\texmf-local/fonts/map/pdftex/context/original-public-lm.map}]
> systems : end file test at line 3
> ){f:\minimal\isoimage\usr\local\context\tex\texmf/fonts/enc/dvips/lm/lm-ec.enc
> }<f:\minimal\isoimage\usr\local\context\tex\texmf/fonts/type1/public/lm/lmr12.p
> fb>
> Output written on test.pdf (1 page, 23324 bytes).
>
> did you run setuptex.bat beforehand?
Yes, I did. I do not keep texmfstart in my path to prevent running
context without sourcing setuptex.
I also tried this by running, cscite.bat and compiling the file
through scite. I get the same error message.
Is it possible that the wrong texmf.cnf is loaded (as Taco pointed
out). There is one at texmf/web2c also. setuptex sets TEXMFCNF to
F:\tmp\mp>echo %TEXMFCNF%
E:\isoimage\usr\local\context\tex\texmf{-local,}/web2c
I changed that to
.......\tex\texmf-local\web2c, but still get the same error.
Context can locate the files
F:\tmp\mp>texmfstart --locate original-empty.map
E:/isoimage/usr/local/context/tex/texmf-local/fonts/map/dvipdfm/context/original
empty.map
but can not open it. I even tried a chmod 755 -R isoimage, but that
did not help.
How can I debug why pdfetex is not able to *open* the map files?
Aditya
--
Aditya Mahajan, EECS Systems, University of Michigan
http://www.eecs.umich.edu/~adityam || Ph: 7342624008
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: pdfetex cannot find map files
2006-05-17 16:59 ` Aditya Mahajan
@ 2006-05-17 17:25 ` Aditya Mahajan
2006-05-17 20:22 ` Hans Hagen
1 sibling, 0 replies; 16+ messages in thread
From: Aditya Mahajan @ 2006-05-17 17:25 UTC (permalink / raw)
On Wed, 17 May 2006, Aditya Mahajan wrote:
>
>> Aditya Mahajan wrote:
>>> The problem of "cannot open font map file" is still there. I deleted
>>> all existing context trees from my computer and downloaded the
>>> mswincontext.zip (dt. 2006-05-17) from Pragma's website. When I run a
>>> simple
>>> \starttext Hello World \stoptext
>>> file, I get
>>> [log snipped]
> On Wed, 17 May 2006, Hans Hagen wrote:
>> here i get for
>>
>> \starttext test \stoptext:
>>[log snipped]
>> did you run setuptex.bat beforehand?
>
>
> Yes, I did. I do not keep texmfstart in my path to prevent running
> context without sourcing setuptex.
>
> I also tried this by running, cscite.bat and compiling the file
> through scite. I get the same error message.
>
> Is it possible that the wrong texmf.cnf is loaded (as Taco pointed
> out). There is one at texmf/web2c also. setuptex sets TEXMFCNF to
>
> F:\tmp\mp>echo %TEXMFCNF%
> E:\isoimage\usr\local\context\tex\texmf{-local,}/web2c
>
> I changed that to
> .......\tex\texmf-local\web2c, but still get the same error.
>
>
> Context can locate the files
>
> F:\tmp\mp>texmfstart --locate original-empty.map
> E:/isoimage/usr/local/context/tex/texmf-local/fonts/map/dvipdfm/context/original
> empty.map
>
> but can not open it. I even tried a chmod 755 -R isoimage, but that
> did not help.
>
> How can I debug why pdfetex is not able to *open* the map files?
Well, there was something in the path that was interfering with
context.
set PATH=E:\Ruby\bin
E:\isoimage\usr\local\context\tex\setuptex.bat E:\isoimage\usr\local\context\tex
works correctly. I do not know what was interfering, I'll look into
everything in my path one by one see what was going wrong.
Sorry about all the noise.
Aditya
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: pdfetex cannot find map files
2006-05-17 16:59 ` Aditya Mahajan
2006-05-17 17:25 ` Aditya Mahajan
@ 2006-05-17 20:22 ` Hans Hagen
2006-05-17 20:32 ` Aditya Mahajan
1 sibling, 1 reply; 16+ messages in thread
From: Hans Hagen @ 2006-05-17 20:22 UTC (permalink / raw)
Aditya Mahajan wrote:
>
> Yes, I did. I do not keep texmfstart in my path to prevent running
> context without sourcing setuptex.
>
> I also tried this by running, cscite.bat and compiling the file
> through scite. I get the same error message.
>
> Is it possible that the wrong texmf.cnf is loaded (as Taco pointed
> out). There is one at texmf/web2c also. setuptex sets TEXMFCNF to
>
> F:\tmp\mp>echo %TEXMFCNF%
> E:\isoimage\usr\local\context\tex\texmf{-local,}/web2c
>
> I changed that to
> .......\tex\texmf-local\web2c, but still get the same error.
>
>
> Context can locate the files
>
> F:\tmp\mp>texmfstart --locate original-empty.map
> E:/isoimage/usr/local/context/tex/texmf-local/fonts/map/dvipdfm/context/original
> empty.map
>
> but can not open it. I even tried a chmod 755 -R isoimage, but that
> did not help.
>
> How can I debug why pdfetex is not able to *open* the map files?
>
so, since you're running the mswin thing, how come that you have this chmod stuff
(when you are on linux, you can best take the justtex.zip and linuxtex.zip files)
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: pdfetex cannot find map files
2006-05-17 20:22 ` Hans Hagen
@ 2006-05-17 20:32 ` Aditya Mahajan
2006-05-17 21:06 ` Hans Hagen
0 siblings, 1 reply; 16+ messages in thread
From: Aditya Mahajan @ 2006-05-17 20:32 UTC (permalink / raw)
On Wed, 17 May 2006, Hans Hagen wrote:
> Aditya Mahajan wrote:
>>
>> Yes, I did. I do not keep texmfstart in my path to prevent running
>> context without sourcing setuptex.
>>
>> I also tried this by running, cscite.bat and compiling the file
>> through scite. I get the same error message.
>>
>> Is it possible that the wrong texmf.cnf is loaded (as Taco pointed
>> out). There is one at texmf/web2c also. setuptex sets TEXMFCNF to
>>
>> F:\tmp\mp>echo %TEXMFCNF%
>> E:\isoimage\usr\local\context\tex\texmf{-local,}/web2c
>>
>> I changed that to
>> .......\tex\texmf-local\web2c, but still get the same error.
>>
>>
>> Context can locate the files
>>
>> F:\tmp\mp>texmfstart --locate original-empty.map
>> E:/isoimage/usr/local/context/tex/texmf-local/fonts/map/dvipdfm/context/original
>> empty.map
>>
>> but can not open it. I even tried a chmod 755 -R isoimage, but that
>> did not help.
>>
>> How can I debug why pdfetex is not able to *open* the map files?
>>
> so, since you're running the mswin thing, how come that you have this chmod stuff
Well, I use cygwin to get all the typical unixy tools. But, it seems
that context (and ruby) do not like cygwin. I need to do some more
testing to see exactly what was interfering, but removing cygwin from
the path seems to do the trick.
> (when you are on linux, you can best take the justtex.zip and linuxtex.zip files)
Usually I get along well with cygwin. This is the first time that
cygwin has bitten me back.
Aditya
--
Aditya Mahajan, EECS Systems, University of Michigan
http://www.eecs.umich.edu/~adityam || Ph: 7342624008
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: pdfetex cannot find map files
2006-05-17 20:32 ` Aditya Mahajan
@ 2006-05-17 21:06 ` Hans Hagen
2006-05-17 22:43 ` Aditya Mahajan
0 siblings, 1 reply; 16+ messages in thread
From: Hans Hagen @ 2006-05-17 21:06 UTC (permalink / raw)
Aditya Mahajan wrote:
> Usually I get along well with cygwin. This is the first time that
> cygwin has bitten me back.
>
i cannot test that because i don't want cygwin on my windows machine (i use gnu bin tools compiled for windows when i need something unix) - whenevr i need something that comes with cygwin, i just take the dll + the prog (say rsync) and put that in its own path
Can it be that cygwin's profile has something tex in it? leftovers from a tetex installation?
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
^ permalink raw reply [flat|nested] 16+ messages in thread
* Re: pdfetex cannot find map files
2006-05-17 21:06 ` Hans Hagen
@ 2006-05-17 22:43 ` Aditya Mahajan
0 siblings, 0 replies; 16+ messages in thread
From: Aditya Mahajan @ 2006-05-17 22:43 UTC (permalink / raw)
On Wed, 17 May 2006, Hans Hagen wrote:
> Aditya Mahajan wrote:
>> Usually I get along well with cygwin. This is the first time that
>> cygwin has bitten me back.
>>
> i cannot test that because i don't want cygwin on my windows machine (i use gnu bin tools compiled for windows when i need something unix) - whenevr i need something that comes with cygwin, i just take the dll + the prog (say rsync) and put that in its own path
>
> Can it be that cygwin's profile has something tex in it? leftovers from a tetex installation?
cygwin has texinfo and I can not remove it because of dependencies. If
I remove cygwin from the path (and use native windows' ruby) context
works fine. I still have the old problem with metapost and windows'
ruby. texexec --mptex does not work correctly. However, when I wrap
the metapost examples in a \startstop MPpage in a tex file, they work
fine.
So, I have a working system though something is still wrong with the
rubies. Cygwin ruby processes metapost files correctly, but not tex
file. Windows ruby processes tex file correctly but not metapost. I
will stick to the windows ruby, and use metapost from inside a tex
file.
I think that I need to do a fresh install of windows. But that will
have to wait. At present context is working :)
Aditya
--
Aditya Mahajan, EECS Systems, University of Michigan
http://www.eecs.umich.edu/~adityam || Ph: 7342624008
^ permalink raw reply [flat|nested] 16+ messages in thread
end of thread, other threads:[~2006-05-17 22:43 UTC | newest]
Thread overview: 16+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2006-05-11 18:50 Trouble with new update Aditya Mahajan
2006-05-11 18:54 ` Hans Hagen
2006-05-11 19:05 ` Aditya Mahajan
2006-05-11 20:10 ` Hans Hagen
2006-05-11 21:38 ` Aditya Mahajan
2006-05-11 19:08 ` Thomas A. Schmitz
2006-05-11 19:11 ` Aditya Mahajan
2006-05-17 16:25 ` pdfetex cannot find map files Aditya Mahajan
2006-05-17 16:34 ` Taco Hoekwater
2006-05-17 16:34 ` Hans Hagen
2006-05-17 16:59 ` Aditya Mahajan
2006-05-17 17:25 ` Aditya Mahajan
2006-05-17 20:22 ` Hans Hagen
2006-05-17 20:32 ` Aditya Mahajan
2006-05-17 21:06 ` Hans Hagen
2006-05-17 22:43 ` Aditya Mahajan
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).