* tabulate inside itemize
@ 2020-07-29 16:38 Mike Cooper
2020-07-29 17:09 ` Wolfgang Schuster
` (2 more replies)
0 siblings, 3 replies; 7+ messages in thread
From: Mike Cooper @ 2020-07-29 16:38 UTC (permalink / raw)
To: ntg-context
[-- Attachment #1.1.1: Type: text/plain, Size: 1955 bytes --]
I would normally use tab stops and line breaks to achieve the following in a numbered list:
1. DC = 3.20 bbl = 420 ft
HWDP = 3.90 bbl = 450 ft
DP = 34.63 bbl = 2,037 ft
Totals = 41.73 bbl = 2,907 ft
2. [next step …]
This is what I tried, but the output has a blank line at the number. I can’t find anything about tabulate inside itemize.
\starttext
\startitemize[n]
\startitem \starttabulate[|l|l|r|l|r|]
\NC DC \NC = \NC 3.20 bbl \NC = \NC 420 ft \NC \NR
\NC HWDP \NC = \NC 3.90 bbl \NC = \NC 450 ft \NC \NR
\NC DP \NC = \NC 34.63 bbl \NC = \NC 2,037 ft \NC \NR
\NC DC \NC = \NC 41.73 bbl \NC = \NC 2,907 ft \NC \NR
\stoptabulate \stopitem
\startitem Convert 2,907 to TVD: \\TVD = 2,907 × cosine 45° = 2,907 × 0.707 = 2,056 ft \stopitem
\startitem ΔP = 2,056 ft × 0.052 × (15 - 7.2) = 834 psi
\stopitemize
\stoptext
Is there some way to stop the blank line or should I use an entirely different approach?
THANKS!!
Mike Cooper
Technical Trainer
Murchison Drilling Schools, Inc.
2501 Juan Tabo NE
Albuquerque, NM 87112
Tel: (505) 293-6271
Fax: (505) 298-5294
Email: mike@murchisondrillingschools.com<mailto:mike@murchisondrillingschools.com>
Website: www.murchisondrillingschools.com<http://www.murchisondrillingschools.com/>
[cid:image007.jpg@01D03ADC.BD6E6850]<https://www.facebook.com/pages/Murchison-Drilling-Schools/158018484232622> [cid:image008.jpg@01D03ADC.BD6E6850] <http://www.linkedin.com/company/murchison-drilling-schools-inc-> [cid:image009.jpg@01D03ADC.BD6E6850] <https://twitter.com/trainingmds>
Murchison Drilling Schools is now part of
[cid:image001.png@01D63515.857FD120]
[-- Attachment #1.1.2: Type: text/html, Size: 37734 bytes --]
[-- Attachment #1.2: image001.jpg --]
[-- Type: image/jpeg, Size: 812 bytes --]
[-- Attachment #1.3: image002.jpg --]
[-- Type: image/jpeg, Size: 951 bytes --]
[-- Attachment #1.4: image003.jpg --]
[-- Type: image/jpeg, Size: 937 bytes --]
[-- Attachment #1.5: image004.png --]
[-- Type: image/png, Size: 9100 bytes --]
[-- Attachment #2: Type: text/plain, Size: 493 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: tabulate inside itemize
2020-07-29 16:38 tabulate inside itemize Mike Cooper
@ 2020-07-29 17:09 ` Wolfgang Schuster
2020-07-29 17:20 ` Hans Hagen
2020-07-29 17:11 ` Hans Hagen
2020-07-29 17:12 ` Aditya Mahajan
2 siblings, 1 reply; 7+ messages in thread
From: Wolfgang Schuster @ 2020-07-29 17:09 UTC (permalink / raw)
To: mailing list for ConTeXt users, Mike Cooper
Mike Cooper schrieb am 29.07.2020 um 18:38:
> I would normally use tab stops and line breaks to achieve the following
> in a numbered list:
>
> 1. DC=3.20 bbl =420 ft
> HWDP= 3.90 bbl =450 ft
> DP= 34.63 bbl = 2,037 ft
> Totals = 41.73 bbl = 2,907 ft
>
> 2. [next step …]
>
> This is what I tried, but the output has a blank line at the number.I
> can’t find anything about tabulate inside itemize.
>
> \starttext
>
> \startitemize[n]
> \startitem \starttabulate[|l|l|r|l|r|]
> \NC DC \NC = \NC 3.20 bbl \NC = \NC 420 ft \NC \NR
> \NC HWDP \NC = \NC 3.90 bbl \NC = \NC 450 ft \NC \NR
> \NC DP \NC = \NC 34.63 bbl \NC =\NC 2,037 ft \NC \NR
> \NC DC \NC = \NC 41.73 bbl \NC =\NC 2,907 ft \NC \NR
> \stoptabulate \stopitem
> \startitem Convert 2,907 to TVD: \\TVD = 2,907 × cosine 45° = 2,907 ×
> 0.707 = 2,056 ft \stopitem
> \startitem ΔP = 2,056 ft × 0.052 × (15 – 7.2) = 834 psi
> \stopitemize
>
> \stoptext
>
> Is there some way to stop the blank line or should I use an entirely
> different approach?
1. Use \blank[overlay] to continue on the first line of the item entry
2. Disable the blank line at the start of the table with "before="
\starttext
\startitemize[n]
\startitem \blank[overlay]
\starttabulate[|l|c|r|c|r|][before=,after=]
\NC DC \NC = \NC 3.20 bbl \NC = \NC 420 ft \NC\NR
\NC HWDP \NC = \NC 3.90 bbl \NC = \NC 450 ft \NC\NR
\NC DP \NC = \NC 34.63 bbl \NC = \NC 2,037 ft \NC\NR
\NC DC \NC = \NC 41.73 bbl \NC = \NC 2,907 ft \NC\NR
\stoptabulate
\stopitem
\startitem
Convert 2,907 to TVD:\crlf
TVD = 2,907 × cosine 45° = 2,907 × 0.707 = 2,056 ft
\stopitem
\startitem
ΔP = 2,056 ft × 0.052 × (15 – 7.2) = 834 psi
\stopitem
\stopitemize
\stoptext
You can also get rid of the = in your table when you use the \EQ column
separator and set the sign for the separator to =.
\starttext
\starttabulate[|l|r|r|][EQ={=}]
\NC DC \EQ 3.20 bbl \EQ 420 ft \NC\NR
\NC HWDP \EQ 3.90 bbl \EQ 450 ft \NC\NR
\NC DP \EQ 34.63 bbl \EQ 2,037 ft \NC\NR
\NC DC \EQ 41.73 bbl \EQ 2,907 ft \NC\NR
\stoptabulate
\stoptext
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: tabulate inside itemize
2020-07-29 17:09 ` Wolfgang Schuster
@ 2020-07-29 17:20 ` Hans Hagen
0 siblings, 0 replies; 7+ messages in thread
From: Hans Hagen @ 2020-07-29 17:20 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 7/29/2020 7:09 PM, Wolfgang Schuster wrote:
> Mike Cooper schrieb am 29.07.2020 um 18:38:
>> I would normally use tab stops and line breaks to achieve the
>> following in a numbered list:
>>
>> 1. DC=3.20 bbl =420 ft
>> HWDP= 3.90 bbl =450 ft
>> DP= 34.63 bbl = 2,037 ft
>> Totals = 41.73 bbl = 2,907 ft
>>
>> 2. [next step …]
>>
>> This is what I tried, but the output has a blank line at the number.I
>> can’t find anything about tabulate inside itemize.
>>
>> \starttext
>>
>> \startitemize[n]
>> \startitem \starttabulate[|l|l|r|l|r|]
>> \NC DC \NC = \NC 3.20 bbl \NC = \NC 420 ft \NC \NR
>> \NC HWDP \NC = \NC 3.90 bbl \NC = \NC 450 ft \NC \NR
>> \NC DP \NC = \NC 34.63 bbl \NC =\NC 2,037 ft \NC \NR
>> \NC DC \NC = \NC 41.73 bbl \NC =\NC 2,907 ft \NC \NR
>> \stoptabulate \stopitem
>> \startitem Convert 2,907 to TVD: \\TVD = 2,907 × cosine 45° = 2,907 ×
>> 0.707 = 2,056 ft \stopitem
>> \startitem ΔP = 2,056 ft × 0.052 × (15 – 7.2) = 834 psi
>> \stopitemize
>>
>> \stoptext
>>
>> Is there some way to stop the blank line or should I use an entirely
>> different approach?
>
> 1. Use \blank[overlay] to continue on the first line of the item entry
Ah ... I start forgetting things ... bad ... (I should use tex more
often I guess)
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: tabulate inside itemize
2020-07-29 16:38 tabulate inside itemize Mike Cooper
2020-07-29 17:09 ` Wolfgang Schuster
@ 2020-07-29 17:11 ` Hans Hagen
2020-07-29 17:26 ` Mike Cooper
2020-07-29 17:12 ` Aditya Mahajan
2 siblings, 1 reply; 7+ messages in thread
From: Hans Hagen @ 2020-07-29 17:11 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 7/29/2020 6:38 PM, Mike Cooper wrote:
> I would normally use tab stops and line breaks to achieve the following
> in a numbered list:
I know this looks terrible:
\define\MyTabulateHack{\vskip-\lineheight\blank[disable]}
\startitemize[n]
\startitem \MyTabulateHack
\starttabulate[|l|l|r|l|r|]
but it kind of works ok in your case.
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: tabulate inside itemize
2020-07-29 16:38 tabulate inside itemize Mike Cooper
2020-07-29 17:09 ` Wolfgang Schuster
2020-07-29 17:11 ` Hans Hagen
@ 2020-07-29 17:12 ` Aditya Mahajan
2020-07-29 17:27 ` Mike Cooper
2 siblings, 1 reply; 7+ messages in thread
From: Aditya Mahajan @ 2020-07-29 17:12 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1: Type: text/plain, Size: 3341 bytes --]
On Wed, 29 Jul 2020, Mike Cooper wrote:
> I would normally use tab stops and line breaks to achieve the following in a numbered list:
>
> 1. DC = 3.20 bbl = 420 ft
> HWDP = 3.90 bbl = 450 ft
> DP = 34.63 bbl = 2,037 ft
> Totals = 41.73 bbl = 2,907 ft
>
> 2. [next step …]
>
>
> This is what I tried, but the output has a blank line at the number. I can’t find anything about tabulate inside itemize.
>
> \starttext
>
> \startitemize[n]
> \startitem \starttabulate[|l|l|r|l|r|]
> \NC DC \NC = \NC 3.20 bbl \NC = \NC 420 ft \NC \NR
> \NC HWDP \NC = \NC 3.90 bbl \NC = \NC 450 ft \NC \NR
> \NC DP \NC = \NC 34.63 bbl \NC = \NC 2,037 ft \NC \NR
> \NC DC \NC = \NC 41.73 bbl \NC = \NC 2,907 ft \NC \NR
> \stoptabulate \stopitem
> \startitem Convert 2,907 to TVD: \\TVD = 2,907 × cosine 45° = 2,907 × 0.707 = 2,056 ft \stopitem
> \startitem ΔP = 2,056 ft × 0.052 × (15 - 7.2) = 834 psi
> \stopitemize
>
> \stoptext
Naive solution: Add a \hbox around tabulate:
\defineframed[tabulateframed][location=top,frame=off]
\starttext
\startitemize[n]
\startitem \dontleavehmode
\tabulateframed{\starttabulate[|l|l|r|l|r|]
\NC DC \NC = \NC 3.20 bbl \NC = \NC 420 ft \NC \NR
\NC HWDP \NC = \NC 3.90 bbl \NC = \NC 450 ft \NC \NR
\NC DP \NC = \NC 34.63 bbl \NC = \NC 2,037 ft \NC \NR
\NC DC \NC = \NC 41.73 bbl \NC = \NC 2,907 ft \NC \NR
\stoptabulate} \stopitem
\startitem Convert 2,907 to TVD: \\TVD = 2,907 × cosine 45° = 2,907 × 0.707 = 2,056 ft \stopitem
\startitem ΔP = 2,056 ft × 0.052 × (15 - 7.2) = 834 psi
\stopitemize
\stoptext
Normally, you can fix such issues by appending a \dontleavehmode in front of the command but that doesn't work here. The offending code is line 1300 of tabl-tbl.mkxl:
\unexpanded\def\tabl_tabulate_outside_before
{\ifhmode\par\fi
\ifhmode
\vbox\bgroup
\let\tabl_tabulate_outside_after \egroup
\let\tabl_tabulate_outside_inbetween\relax
\orelse\ifinner
\let\tabl_tabulate_outside_after \relax
\let\tabl_tabulate_outside_inbetween\relax
\else
\whitespace
\tabulationparameter\c!before
\relax
\let\tabl_tabulate_outside_after \tabl_tabulate_outside_after_indeed
\let\tabl_tabulate_outside_inbetween\tabl_tabulate_outside_inbetween_indeed
\fi}
\protect
When you use \dontleavehmode\starttabulate, \starttabulate starts in horizontal mode but the first \par in the above command takes it back to vertical mode. The next \ifhmode then evaluates to false, \ifinner also evaluates to false, so we enter the \else loop which inserts a \whitespace.
The reason why adding a \hbox{...} (which is what \framed without an align key does) works is because inside an \hbox{...} \par doesn't take TeX back to vertical mode. So, we enter the first branch.
Aditya
[-- Attachment #2: Type: text/plain, Size: 493 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread* Re: tabulate inside itemize
2020-07-29 17:12 ` Aditya Mahajan
@ 2020-07-29 17:27 ` Mike Cooper
0 siblings, 0 replies; 7+ messages in thread
From: Mike Cooper @ 2020-07-29 17:27 UTC (permalink / raw)
To: mailing list for ConTeXt users
THANKS ADITYA!
I got Wolfgang's solution first and it works great.
But I think there are some things in your solution that I should try to learn about. :)
> -----Original Message-----
> From: ntg-context [mailto:ntg-context-bounces@ntg.nl] On Behalf Of Aditya
> Mahajan
> Sent: Wednesday, July 29, 2020 11:12 AM
> To: mailing list for ConTeXt users
> Subject: Re: [NTG-context] tabulate inside itemize
>
> On Wed, 29 Jul 2020, Mike Cooper wrote:
>
> > I would normally use tab stops and line breaks to achieve the following in a
> numbered list:
> >
> > 1. DC = 3.20 bbl = 420 ft
> > HWDP = 3.90 bbl = 450 ft
> > DP = 34.63 bbl = 2,037 ft
> > Totals = 41.73 bbl = 2,907 ft
> >
> > 2. [next step …]
> >
> >
> > This is what I tried, but the output has a blank line at the number. I can’t find
> anything about tabulate inside itemize.
> >
> > \starttext
> >
> > \startitemize[n]
> > \startitem \starttabulate[|l|l|r|l|r|]
> > \NC DC \NC = \NC 3.20 bbl \NC = \NC 420 ft \NC \NR
> > \NC HWDP \NC = \NC 3.90 bbl \NC = \NC 450 ft \NC \NR
> > \NC DP \NC = \NC 34.63 bbl \NC = \NC 2,037 ft \NC \NR
> > \NC DC \NC = \NC 41.73 bbl \NC = \NC 2,907 ft \NC \NR
> > \stoptabulate \stopitem
> > \startitem Convert 2,907 to TVD: \\TVD = 2,907 × cosine 45° = 2,907 ×
> 0.707 = 2,056 ft \stopitem
> > \startitem ΔP = 2,056 ft × 0.052 × (15 - 7.2) = 834 psi
> > \stopitemize
> >
> > \stoptext
>
> Naive solution: Add a \hbox around tabulate:
>
>
> \defineframed[tabulateframed][location=top,frame=off]
>
> \starttext
>
> \startitemize[n]
> \startitem \dontleavehmode
> \tabulateframed{\starttabulate[|l|l|r|l|r|]
> \NC DC \NC = \NC 3.20 bbl \NC = \NC 420 ft \NC \NR
> \NC HWDP \NC = \NC 3.90 bbl \NC = \NC 450 ft \NC \NR
> \NC DP \NC = \NC 34.63 bbl \NC = \NC 2,037 ft \NC \NR
> \NC DC \NC = \NC 41.73 bbl \NC = \NC 2,907 ft \NC \NR
> \stoptabulate} \stopitem
> \startitem Convert 2,907 to TVD: \\TVD = 2,907 × cosine 45° = 2,907 ×
> 0.707 = 2,056 ft \stopitem
> \startitem ΔP = 2,056 ft × 0.052 × (15 - 7.2) = 834 psi \stopitemize
>
> \stoptext
>
> Normally, you can fix such issues by appending a \dontleavehmode in front of the
> command but that doesn't work here. The offending code is line 1300 of tabl-
> tbl.mkxl:
>
> \unexpanded\def\tabl_tabulate_outside_before
> {\ifhmode\par\fi
> \ifhmode
> \vbox\bgroup
> \let\tabl_tabulate_outside_after \egroup
> \let\tabl_tabulate_outside_inbetween\relax
> \orelse\ifinner
> \let\tabl_tabulate_outside_after \relax
> \let\tabl_tabulate_outside_inbetween\relax
> \else
> \whitespace
> \tabulationparameter\c!before
> \relax
> \let\tabl_tabulate_outside_after \tabl_tabulate_outside_after_indeed
> \let\tabl_tabulate_outside_inbetween\tabl_tabulate_outside_inbetween_indeed
> \fi}
> \protect
>
> When you use \dontleavehmode\starttabulate, \starttabulate starts in horizontal
> mode but the first \par in the above command takes it back to vertical mode. The
> next \ifhmode then evaluates to false, \ifinner also evaluates to false, so we enter
> the \else loop which inserts a \whitespace.
>
> The reason why adding a \hbox{...} (which is what \framed without an align key
> does) works is because inside an \hbox{...} \par doesn't take TeX back to vertical
> mode. So, we enter the first branch.
>
> Aditya
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2020-07-29 17:27 UTC | newest]
Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-07-29 16:38 tabulate inside itemize Mike Cooper
2020-07-29 17:09 ` Wolfgang Schuster
2020-07-29 17:20 ` Hans Hagen
2020-07-29 17:11 ` Hans Hagen
2020-07-29 17:26 ` Mike Cooper
2020-07-29 17:12 ` Aditya Mahajan
2020-07-29 17:27 ` Mike Cooper
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).