I would normally use tab stops and line breaks to achieve the following in a numbered list: 1. DC = 3.20 bbl = 420 ft HWDP = 3.90 bbl = 450 ft DP = 34.63 bbl = 2,037 ft Totals = 41.73 bbl = 2,907 ft 2. [next step …] This is what I tried, but the output has a blank line at the number. I can’t find anything about tabulate inside itemize. \starttext \startitemize[n] \startitem \starttabulate[|l|l|r|l|r|] \NC DC \NC = \NC 3.20 bbl \NC = \NC 420 ft \NC \NR \NC HWDP \NC = \NC 3.90 bbl \NC = \NC 450 ft \NC \NR \NC DP \NC = \NC 34.63 bbl \NC = \NC 2,037 ft \NC \NR \NC DC \NC = \NC 41.73 bbl \NC = \NC 2,907 ft \NC \NR \stoptabulate \stopitem \startitem Convert 2,907 to TVD: \\TVD = 2,907 × cosine 45° = 2,907 × 0.707 = 2,056 ft \stopitem \startitem ΔP = 2,056 ft × 0.052 × (15 - 7.2) = 834 psi \stopitemize \stoptext Is there some way to stop the blank line or should I use an entirely different approach? THANKS!! Mike Cooper Technical Trainer Murchison Drilling Schools, Inc. 2501 Juan Tabo NE Albuquerque, NM 87112 Tel: (505) 293-6271 Fax: (505) 298-5294 Email: mike@murchisondrillingschools.com Website: www.murchisondrillingschools.com [cid:image007.jpg@01D03ADC.BD6E6850] [cid:image008.jpg@01D03ADC.BD6E6850] [cid:image009.jpg@01D03ADC.BD6E6850] Murchison Drilling Schools is now part of [cid:image001.png@01D63515.857FD120]