* Re: ConTeXt and Aleph
@ 2004-09-16 18:12 Steffen Wolfrum
0 siblings, 0 replies; 14+ messages in thread
From: Steffen Wolfrum @ 2004-09-16 18:12 UTC (permalink / raw)
Hans Hagen <pragma@wxs.nl> wrote:
> ishamid wrote:
>
> >Hi
> >
> >
> >>===== Original Message From mailing list for ConTeXt users
> >>
> >>
> ><ntg-context@ntg.nl>
> >
> >
> >>Then I tried the steps Idris recommend once:
> >>
> >>
> >>
> >>>eomega --ini *plain \dump
> >>>eomega --ini *cont-en
> >>>texexec --make en -tex=eomega
> >>>
> >>>are the relevant commands. eomega _is_ aleph.
> >>>
> >>>
> >
> >I'm sure of course that you replaced `eomega' with `aleph';-)
> >
> >There should be no need to add aleph.exe to your path if you just refresh the
> >fndb, which I'm sure u did also;-)) (I don't know about MacOSX but TeXLive
> >contains a shortcut to that command in Programs=>TeXLive=>Maintanence).
> >
> >I (or Hans) will send you the stuff Hans sent me if all else fails: that will
> >work for sure.
> >
> >
> the latest release contains a texexec:
>
> texexec --make --all --alone --tex=aleph
>
> you can configure texexec.ini to use the engine subpath which is handy when you run pdfetex along side (the new binaries all have the same suffix now; tetex will not support the tds engine subpath, i dunny yet about fptex and miktex; let's hope that they do)
>
> (--engine is also possible in texexec 5.0)
>
> Hans
I did that. But it didn't work.
See log below, please. Strange last line ...
Thank you,
Steffen
Microsoft Windows XP [Version 5.1.2600]
(C) Copyright 1985-2001 Microsoft Corp.
C:\Dokumente und Einstellungen\Ich>texexec --make --all --alone --tex=aleph
TeXExec 4.0 - ConTeXt / PRAGMA ADE 1997-2003
TeX hash binary : mktexlsr
comment : hashing may take a while ...
mktexlsr: Updating C:/TeXLive/texmf-home/ls-R...
mktexlsr: Updating c:/TeXLive/texmf-var/ls-R...
mktexlsr: Updating c:/TeXLive/texmf-local/ls-R...
mktexlsr: Updating c:/TeXLive/texmf/ls-R...
mktexlsr: Updating c:/TeXLive/texmf-extra/ls-R...
mktexlsr: your `ls-R' database files have been modified
while kpathsea Dll was loaded by other programs.
It is recommended that you terminate all of them.
in order to reinitialize the shared databases.
mktexlsr: Done.
This is Alephk, Version 3.141592--1.15--2.1--RC3 (Web2c 7.5.3) (INIALEPH)
%&-line parsing enabled.
Copyright (c) 2002--2004 the Aleph task force
(c:/TeXLive/texmf-local/tex/context/base/cont-en.tex
(c:/TeXLive/texmf-local/tex/context/base/context.tex
(c:/TeXLive/texmf-local/tex/context/base/syst-pln.tex)
(c:/TeXLive/texmf-local/tex/context/base/syst-prm.tex)
(c:/TeXLive/texmf-local/tex/context/base/syst-etx.tex)
(c:/TeXLive/texmf-local/tex/context/base/syst-omg.tex)
(c:/TeXLive/texmf-local/tex/context/base/syst-gen.tex
loading : Context System Macros / General
) (c:/TeXLive/texmf-local/tex/context/base/syst-ext.tex
loading : Context System Macro's / Extras
) (c:/TeXLive/texmf-local/tex/context/base/syst-new.tex)
(c:/TeXLive/texmf-local/tex/context/base/syst-con.tex
loading : Context System Macro's / Conversions
) (c:/TeXLive/texmf-local/tex/context/base/math-pln.tex)
(c:/TeXLive/texmf-local/tex/context/base/supp-ini.tex
loading : Context Support Macros / Initializations
) (c:/TeXLive/texmf-local/tex/context/base/supp-fil.tex
loading : Context Support Macros / Files
) (c:/TeXLive/texmf-local/tex/context/base/mult-ini.tex
loading : Context Multilingual Macros / Initialization
) (c:/TeXLive/texmf-local/tex/context/base/mult-sys.tex
loading : Context Multilingual Macros / System
interface : defining english interface
interface : using english messages
) (c:/TeXLive/texmf-local/tex/context/base/mult-con.tex
loading : Context Multilingual Macros / Constants
) (c:/TeXLive/texmf-local/tex/context/base/mult-com.tex
loading : Context Multilingual Macros / Commands
) (c:/TeXLive/texmf-local/tex/context/base/thrd-ran.tex)
(c:/TeXLive/texmf-local/tex/context/base/thrd-trg.tex)
(c:/TeXLive/texmf-local/tex/context/base/supp-box.tex
loading : Context Support Macros / Boxes
system (OMEGA) : [line 2683] dir
) (c:/TeXLive/texmf-local/tex/context/base/supp-mrk.tex
loading : Context Support Macros / Marks
) (c:/TeXLive/texmf-local/tex/context/base/supp-vis.tex
loading : Context Support Macros / Visualization
) (c:/TeXLive/texmf-local/tex/context/base/supp-fun.tex
loading : Context Support Macros / Fun Stuff
) (c:/TeXLive/texmf-local/tex/context/base/supp-eps.tex
loading : Context Support Macros / EPS
) (c:/TeXLive/texmf-local/tex/context/base/supp-pdf.tex
loading : Context Support Macros / PDF (2004.03.26)
) (c:/TeXLive/texmf-local/tex/context/base/supp-spe.tex
loading : Context Support Macros / Specials
) (c:/TeXLive/texmf-local/tex/context/base/supp-mps.tex
(c:/TeXLive/texmf-local/tex/context/base/supp-ini.tex
loading : Context Support Macros / Initializations
)
loading : Context Support Macros / MetaPost Inclusion
) (c:/TeXLive/texmf-local/tex/context/base/supp-mpe.tex
loading : MetaPost Special Extensions
) (c:/TeXLive/texmf-local/tex/context/base/supp-tpi.tex
loading : Context Support Macros / TPIC Conversion
) (c:/TeXLive/texmf-local/tex/context/base/supp-mat.tex
loading : Context Support Macros / Math
) (c:/TeXLive/texmf-local/tex/context/base/supp-ran.tex
loading : Third Party Macros / Random Number Generation
) (c:/TeXLive/texmf-local/tex/context/base/supp-ali.tex)
(c:/TeXLive/texmf-local/tex/context/base/typo-ini.tex
loading : Context Typographic Macros (ini)
) (c:/TeXLive/texmf-local/tex/context/base/verb-ini.tex
loading : Context Verbatim Macros / Initialization
) (c:/TeXLive/texmf-local/tex/context/base/core-var.tex
loading : Context Core Macros / Variables
) (c:/TeXLive/texmf-local/tex/context/base/core-ins.tex
loading : Context Insertion Macros / General
) (c:/TeXLive/texmf-local/tex/context/base/core-fil.tex
loading : Context Core Macros / File Support
) (c:/TeXLive/texmf-local/tex/context/base/core-con.tex
loading : Context Core Macros / Conversion Macros
) (c:/TeXLive/texmf-local/tex/context/base/cont-fil.tex
loading : Context File Synonyms
) (c:/TeXLive/texmf-local/tex/context/base/thrd-tab.tex)
(c:/TeXLive/texmf-local/tex/context/base/supp-lan.tex
loading : Context Support Macros / Language Options
) (c:/TeXLive/texmf-local/tex/context/base/supp-num.tex
loading : Context Support Macros / Number (Digit) Handling
) (c:/TeXLive/texmf-local/tex/context/base/enco-ini.tex
loading : Context Encoding Macros (ini)
encoding : coding def is loaded
(c:/TeXLive/texmf-local/tex/context/base/enco-def.tex
encoding : coding default
encoding : coding default
encoding : coding default
)
encoding : coding acc is loaded
(c:/TeXLive/texmf-local/tex/context/base/enco-acc.tex
encoding : coding default
encoding : coding default
)
encoding : coding raw is loaded
(c:/TeXLive/texmf-local/tex/context/base/enco-raw.tex
encoding : coding raw
)
encoding : coding com is loaded
(c:/TeXLive/texmf-local/tex/context/base/enco-com.tex)
encoding : coding cas is loaded
(c:/TeXLive/texmf-local/tex/context/base/enco-cas.tex)
encoding : coding mis is loaded
(c:/TeXLive/texmf-local/tex/context/base/enco-mis.tex)
encoding : coding ans is loaded
(c:/TeXLive/texmf-local/tex/context/base/enco-ans.tex
encoding : coding texnansi
encoding : coding texnansi
)
encoding : coding il2 is loaded
(c:/TeXLive/texmf-local/tex/context/base/enco-il2.tex
encoding : coding il2
)
encoding : coding ec is loaded
(c:/TeXLive/texmf-local/tex/context/base/enco-ec.tex
encoding : coding ec
)
encoding : coding tbo is loaded
(c:/TeXLive/texmf-local/tex/context/base/enco-tbo.tex
encoding : coding 8r
)
encoding : coding pdf is loaded
(c:/TeXLive/texmf-local/tex/context/base/enco-pdf.tex
encoding : coding pdfdoc
)
encoding : coding uc is loaded
(c:/TeXLive/texmf-local/tex/context/base/enco-uc.tex
encoding : coding uc
)
encoding : coding pol is loaded
(c:/TeXLive/texmf-local/tex/context/base/enco-pol.tex
encoding : coding pl0
encoding : coding pl0
encoding : coding pl0
encoding : coding pl1
encoding : coding pl1
encoding : coding pl2
encoding : coding pl2
)
encoding : coding qx is loaded
(c:/TeXLive/texmf-local/tex/context/base/enco-qx.tex
encoding : coding qx
)) (c:/TeXLive/texmf-local/tex/context/base/filt-ini.tex
loading : Context Filter Macros (ini)
) (c:/TeXLive/texmf-local/tex/context/base/hand-ini.tex
loading : Context Handling Macros (ini)
handling : font handling def is loaded
(c:/TeXLive/texmf-local/tex/context/base/hand-def.tex))
(c:/TeXLive/texmf-local/tex/context/base/regi-ini.tex
encoding : coding def is loaded
(c:/TeXLive/texmf-local/tex/context/base/regi-def.tex)
encoding : coding uni is loaded
(c:/TeXLive/texmf-local/tex/context/base/regi-uni.tex)
encoding : coding ibm is loaded
(c:/TeXLive/texmf-local/tex/context/base/regi-ibm.tex)
encoding : coding win is loaded
(c:/TeXLive/texmf-local/tex/context/base/regi-win.tex)
encoding : coding il1 is loaded
(c:/TeXLive/texmf-local/tex/context/base/regi-il1.tex)
encoding : coding mac is loaded
(c:/TeXLive/texmf-local/tex/context/base/regi-mac.tex))
(c:/TeXLive/texmf-local/tex/context/base/lang-ini.tex
loading : Context Language Macros / Initialization
) (c:/TeXLive/texmf-local/tex/context/base/unic-ini.tex
loading : Context UNICODE Macros (ini)
) (c:/TeXLive/texmf-local/tex/context/base/colo-ini.tex
loading : Context Color Macros / initialization
color : rgb color space is supported
color : cmyk color space is supported
color : mpcmyk color space is supported
color : mpspot color space is supported
color : system rgb is loaded
(c:/TeXLive/texmf-local/tex/context/base/colo-rgb.tex
color : specification [s=0] at color black becomes black
color : palette alfa is available
color : palette beta is available
color : palette gamma is available
color : palette delta is available
color : palette epsilon is available
color : palette zeta is available
)) (c:/TeXLive/texmf-local/tex/context/base/colo-ext.tex
loading : Context Color Macros / extras
) (c:/TeXLive/texmf-local/tex/context/base/spec-mis.tex
loading : Context Special Macros / Miscellaneous Macros
) (c:/TeXLive/texmf-local/tex/context/base/spec-ini.tex
loading : Context Special Macros / Initialization
! Illegal parameter number in definition of \asciiB.
<to be read again>
1
<argument> ... \zerocount \def \setMPPDFobject ##1
##2{\def \getMPPDFobject {...
\convertargument #1\to #2->\long \def #2{#1
}\dodoglobal \edef #2{\convertedc...
\doifintokselse ...ertargument \the #2\to \asciiB
\doifstringinstringelse \a...
\doappendtoksonce ...selse \@@scratchtoks \@@toks
\donothing \dodoappendtoks
l.188 \to \everyresetspecials
?
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt and Aleph
@ 2004-09-26 15:51 Steffen Wolfrum
0 siblings, 0 replies; 14+ messages in thread
From: Steffen Wolfrum @ 2004-09-26 15:51 UTC (permalink / raw)
Cc: pragma
Hi,
as there seemed to be interactions between ConTeXt that comes with TeXLive and the recent one I've installed, I finally deleted EVERYTHING and started anew.
-> I installed TeXLive on a WinXP - without the ConTeXt option.
-> I copied the saved texec.exe in TeXLive's /bin folder
-> I installed bin-aleph-1.15--2.2--RC2-win32.zip from CTAN
-> I executed the following comands:
mktexlsr
fmtutil --all
mktexlsr
texexec --make --all --alone --tex=aleph
mktexlsr
texexec alephtest1.tex --tex=aleph --output=dpx
But again it failed and ended in "*".
There ought to be people out there who got Aleph (+ConTeXt) working.
How did you do that?
Could someone please have a look and tell what is wrong?
Thank you very much,
Steffen
C:\STEFFEN\Neuer_Ordner>texexec alephtest1.tex --tex=aleph --output=dpx
TeXExec 5.0 - ConTeXt / PRAGMA ADE 1997-2004
executable : aleph
format : cont-en
inputfile : alephtest1
output : dvipdfmx
interface : en
current mode : none
TeX run : 1
This is Alephk, Version 3.141592--1.15--2.1--RC3 (Web2c 7.5.3)
%&-line parsing enabled.
Copyright (c) 2002--2004 the Aleph task force
entering extended mode
(alephtest1.tex
ConTeXt ver: 2004.9.17 fmt: 2004.9.26 int: english mes: english
language : language en is active
<protectionstate 0>
system : cont-new loaded
(c:/TeXLive/texmf-local/tex/context/base/cont-new.tex
systems : beware: some patches loaded from cont-new.tex!
color : palette rollover is available
system (E-TEX) : [line 921]
system (E-TEX) : [line 976]
)
system : cont-old loaded
(c:/TeXLive/texmf-local/tex/context/base/cont-old.tex
loading : Context Old Macros
)
system : cont-fil loaded
(c:/TeXLive/texmf-local/tex/context/base/cont-fil.tex
loading : Context File Synonyms
)
bodyfont : 12pt rm is loaded
language : patterns en->default:default->1->2:2 uk->default:default->2->2
:2 de->texnansi:texnansi->3->2:2 de->ec:ec->4->2:2 fr->texnansi:texnansi->5->2:
2 fr->ec:ec->6->2:2 es->default:default->7->2:2 it->texnansi:texnansi->8->2:2 i
t->ec:ec->9->2:2 nl->texnansi:texnansi->10->2:2 nl->ec:ec->11->2:2 loaded
specials : tex,postscript,rokicki loaded
system : alephtest1.top loaded
(./alephtest1.top
specials : loading definition file dpx
(c:/TeXLive/texmf-local/tex/context/base/spec-dpx.tex
specials : loading definition file fdf
(c:/TeXLive/texmf-local/tex/context/base/spec-fdf.tex <unprotect 3>
<unprotect 4>
system (E-TEX) : [line 2256] \ifcsname
<protect 4> <protect 3>)
specials : fdf loaded
<unprotect 3> <protect 3>)
specials : fdf,dpx loaded
))
*
ishamid <ishamid@lamar.colostate.edu> wrote:
> >===== Original Message From <ntg-context@ntg.nl> =====
>
> [snip]
>
> > TeXExec 4.0 - ConTeXt / PRAGMA ADE 1997-2003
> >
> >
> >
> >Opt=HASH(0x1b453a4) executable : aleph
> >
> > format : cont-en
> >
> > inputfile : alephtest1
> >
> > output : dpx
> >
> > interface : en
> >
> > current mode : none
> >
> > TeX run : 1
> >
>
> so TeXexec is working...
>
> >
> >This is Alephk, Version 3.141592--1.15--2.1--RC3 (Web2c 7.5.3)
> >
> > %&-line parsing enabled.
> >
> >Copyright (c) 2002--2004 the Aleph task force
> >
> >entering extended mode
> >
> >(alephtest1.tex
>
> and Aleph is working in extended mode
>
> >ConTeXt ver: 2004.8.15 fmt: 2004.9.16 int: english mes: english
> >
>
> u have a working format...
>
> >*
>
> Weird: There is almost certainly something wrong in your format file.. Did you
> install the ConTeXt that came with fpTeX? If so, get rid of it (minus
> texexec.exe), reinstall the latest version, and try again.
>
> best
> Idris
>
>
> _______________________________________________
> ntg-context mailing list
> ntg-context@ntg.nl
> http://www.ntg.nl/mailman/listinfo/ntg-context
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt and Aleph
@ 2004-09-19 22:17 Steffen Wolfrum
0 siblings, 0 replies; 14+ messages in thread
From: Steffen Wolfrum @ 2004-09-19 22:17 UTC (permalink / raw)
Hans Hagen <pragma@wxs.nl> wrote:
> Steffen Wolfrum wrote:
>
> >Yes, when I installed TeXLive there was also ConTeXt installed.
> >Then I immediately deleted the files in texmf/tex/context/base/ and texmf/metapost/context/base/ .
> >
> >Now I also deleted the texmf/.../texexec.ini file and reinstalled context again (texmf-local tree)
> >Hashed the ls-r, rebuild the formats and tried it again.
> >
> >Still the same error logs.
> >
> >Maybe there are still some leftovers from TeXLives ConTeXt interfering?
> >What is the right way to "get rid of it (minus texexec.exe)"?
> >When I install ConTeXt in a local tree do I have to delete more ConTeXt files in the main tree?
> >
> >
> can you check where the pl files go? new paths in tds:
>
> fonts/enc
> fonts/map
>
> scripts/context/[perl|ruby|...]
...
> Hans
sure I can check.
but which pl files do you mean in particularly?
(i've noticed the new tds paths, but don't know what to look for...)
steffen
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt and Aleph
@ 2004-09-17 8:26 Steffen Wolfrum
0 siblings, 0 replies; 14+ messages in thread
From: Steffen Wolfrum @ 2004-09-17 8:26 UTC (permalink / raw)
ishamid <ishamid@lamar.colostate.edu> wrote:
> Weird: There is almost certainly something wrong in your format file.. Did you
> install the ConTeXt that came with fpTeX? If so, get rid of it (minus
> texexec.exe), reinstall the latest version, and try again.
>
> best
> Idris
Yes, when I installed TeXLive there was also ConTeXt installed.
Then I immediately deleted the files in texmf/tex/context/base/ and texmf/metapost/context/base/ .
Now I also deleted the texmf/.../texexec.ini file and reinstalled context again (texmf-local tree)
Hashed the ls-r, rebuild the formats and tried it again.
Still the same error logs.
Maybe there are still some leftovers from TeXLives ConTeXt interfering?
What is the right way to "get rid of it (minus texexec.exe)"?
When I install ConTeXt in a local tree do I have to delete more ConTeXt files in the main tree?
Thank you,
Steffen
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt and Aleph
@ 2004-09-16 18:13 Steffen Wolfrum
0 siblings, 0 replies; 14+ messages in thread
From: Steffen Wolfrum @ 2004-09-16 18:13 UTC (permalink / raw)
ishamid <ishamid@lamar.colostate.edu> wrote:
> >There should be no need to add aleph.exe to your path if you just refresh the
> >fndb,
>
> Assuming of course that u put aleph.exe in TeXLive/bin or somewhere similar
>
> Idris
It was in TeXLive/bin/win32-static and now I copied it to the regular TeXLive/bin/win32.
Then again I executed the commands you recommended (with aleph as eomega),
and tried to texexec my file afterwards,
but again it didn't work.
The process stopped with a "*" - see log below.
Could you have a look, please?
Thank you,
Steffen
C:\Dokumente und Einstellungen\Ich\Desktop\Neuer_Ordner>texexec alephtest1.tex -
-tex=aleph --output=dpx
TeXExec 4.0 - ConTeXt / PRAGMA ADE 1997-2003
Opt=HASH(0x1b453a4) executable : aleph
format : cont-en
inputfile : alephtest1
output : dpx
interface : en
current mode : none
TeX run : 1
This is Alephk, Version 3.141592--1.15--2.1--RC3 (Web2c 7.5.3)
%&-line parsing enabled.
Copyright (c) 2002--2004 the Aleph task force
entering extended mode
(alephtest1.tex
ConTeXt ver: 2004.8.15 fmt: 2004.9.16 int: english mes: english
language : language en is active
<protectionstate 0>
system : cont-new loaded
(c:/TeXLive/texmf-local/tex/context/base/cont-new.tex
systems : beware: some patches loaded from cont-new.tex!
color : palette rollover is available
system (E-TEX) : [line 567]
system (E-TEX) : [line 622]
)
system : cont-old loaded
(c:/TeXLive/texmf-local/tex/context/base/cont-old.tex
loading : Context Old Macros
)
system : cont-fil loaded
(c:/TeXLive/texmf-local/tex/context/base/cont-fil.tex
loading : Context File Synonyms
)
bodyfont : 12pt rm is loaded
language : patterns 2:2-en-2 3:2-uk-2 4:2-de-2 5:2-fr-2 6:2-es-2 7:2-it-2
8:2-nl-2 loaded
specials : tex,postscript,rokicki loaded
system : alephtest1.top loaded
(./alephtest1.top
specials : loading definition file dpx
(c:/TeXLive/texmf-local/tex/context/base/spec-dpx.tex
specials : loading definition file fdf
(c:/TeXLive/texmf-local/tex/context/base/spec-fdf.tex <unprotect 3>
<unprotect 4>
system (E-TEX) : [line 2253] \ifcsname
<protect 4> <protect 3>)
specials : fdf loaded
<unprotect 3> <protect 3>)
specials : fdf,dpx loaded
))
*
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt and Aleph
@ 2004-09-16 12:49 Steffen Wolfrum
0 siblings, 0 replies; 14+ messages in thread
From: Steffen Wolfrum @ 2004-09-16 12:49 UTC (permalink / raw)
Hi,
in order to use Aleph in ConTeXt I switched from MacOSX to WinXP.
I installed fptex from the latest TeXLive CD (Sept.2003)
installed the recent ConTeXt beta in my local tree,
installed also the latest (?) Aleph version from CTAN ("bin-aleph-1.15--2.2--RC2-win32-static.zip")
in the main tree and followed the steps Hans once wrote here:
> texexec --make --alone --tex=aleph
>
> texexec yourfile --tex=aleph --output=dpx
>
> (or first line of file: % tex=aleph output=dvipdfmx)
>
>
> Hans
The result was not working:
***
TeXExec 4.0 - ConTeXt / PRAGMA ADE 1997-2003
executable : aleph
format : cont-en
inputfile : alephtest1
output : dvipdfmx
interface : en
current mode : none
TeX run : 1
Der Befehl "aleph" ist entweder falsch geschrieben oder konnte nicht gefunden werden.
[the command "aleph" is either misspelled or could not be found]
Der Befehl "cont-en" ist entweder falsch geschrieben oder konnte nicht gefunden werden.
[the command "cont-en" is either misspelled or could not be found]
return code : 256
run time : 0 seconds
total run time : 0 seconds
***
Then I tried the steps Idris recommend once:
> eomega --ini *plain \dump
> eomega --ini *cont-en
> texexec --make en -tex=eomega
>
> are the relevant commands. eomega _is_ aleph.
>
> ...
>
> Idris
The result was the same error output as above.
Could someone who has Aleph successfully running tell me his/her secret, please?
Thank you,
Steffen
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt and Aleph
@ 2004-08-17 16:08 Steffen Wolfrum
2004-08-17 16:24 ` Idris Samawi Hamid
0 siblings, 1 reply; 14+ messages in thread
From: Steffen Wolfrum @ 2004-08-17 16:08 UTC (permalink / raw)
Hans Hagen <pragma@wxs.nl> wrote:
> Steffen Wolfrum wrote:
>
> >ever so often I read mails by Giuseppe or Idris on Aleph.
> >Now I also saw that there is a context-manual on aleph.
> >Does this mean I can use the examples mentions there under ConTeXt?
> >
> >Running an alephtest.tex file ...
> >\start \textdir TLT\relax \setups[ward]
> >\start \textdir BLB\relax \red \setups[ward]
> >\stop \setups[ward]
> >\stop
> >... tells me that "\textdir" is an "Undefined control sequence"
> >
> >
> >What is missing?
> >
> >
> probably aleph -)
>
> texexec --make --alone --tex=aleph
>
> texexec yourfile --tex=aleph --output=dpx
>
> (or first line of file: % tex=aleph output=dvipdfmx)
>
>
> Hans
So I execute
sudo texexec --make --alone --tex=aleph
and try
% tex=aleph output=dvipdfmx
\start \textdir TLT\relax \setups[ward]
\start \textdir BLB\relax \red \setups[ward]
\stop \setups[ward]
\stop
But that gives me only:
TeXExec 4.0 - ConTeXt / PRAGMA ADE 1997-2003
executable : aleph
format : cont-en
inputfile : aleph
output : dvipdfmx
interface : en
current mode : none
TeX run : 1
sh: aleph: command not found
return code : 32512
run time : 0 seconds
total run time : 1 seconds
What else is missing?
Steffen
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt and Aleph
2004-08-17 16:08 Steffen Wolfrum
@ 2004-08-17 16:24 ` Idris Samawi Hamid
2004-08-18 0:15 ` Bob Kerstetter
0 siblings, 1 reply; 14+ messages in thread
From: Idris Samawi Hamid @ 2004-08-17 16:24 UTC (permalink / raw)
On Tue, 17 Aug 2004 18:08:25 +0200, Steffen Wolfrum
<context@st.estfiles.de> wrote:
> Hans Hagen <pragma@wxs.nl> wrote:
>> >What is missing?
>> >
>> >
>> probably aleph -)
>>
> sh: aleph: command not found
>
> return code : 32512
> run time : 0 seconds
>
> total run time : 1 seconds
>
>
>
> What else is missing?
You must make sure that aleph, a flavor of TeX like pdfeTeX, is actually
available for the Mac, then create the plain and context formats for aleph.
eomega --ini *plain \dump
eomega --ini *cont-en
texexec --make en -tex=eomega
are the relevant commands. eomega _is_ aleph.
If you want to do serious work with aleph u'll have to modify the
texmf.cnf file as well: comment this line
extra_mem_bot.context = 4000000
otherwise you will meet some nasty surprises!
Best
Idris
--
Professor Idris Samawi Hamid
Department of Philosophy
Colorado State University
Fort Collins, CO 80523
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt and Aleph
2004-08-17 16:24 ` Idris Samawi Hamid
@ 2004-08-18 0:15 ` Bob Kerstetter
2004-08-18 3:59 ` Bob Kerstetter
0 siblings, 1 reply; 14+ messages in thread
From: Bob Kerstetter @ 2004-08-18 0:15 UTC (permalink / raw)
On Aug 17, 2004, at 11:24 AM, Idris Samawi Hamid wrote:
>> aleph
aleph is the omega snip-off?
for fun, lookup aleph on google. lots of alephs running around.
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt and Aleph
2004-08-18 0:15 ` Bob Kerstetter
@ 2004-08-18 3:59 ` Bob Kerstetter
2004-08-18 4:07 ` Steve Peter
0 siblings, 1 reply; 14+ messages in thread
From: Bob Kerstetter @ 2004-08-18 3:59 UTC (permalink / raw)
On Aug 17, 2004, at 7:15 PM, Bob Kerstetter wrote:
> On Aug 17, 2004, at 11:24 AM, Idris Samawi Hamid wrote:
>
>>> aleph
>
> aleph is the omega snip-off?
aah. spin-off, not snip-off. but anyway, is that what aleph is?
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt and Aleph
2004-08-18 3:59 ` Bob Kerstetter
@ 2004-08-18 4:07 ` Steve Peter
0 siblings, 0 replies; 14+ messages in thread
From: Steve Peter @ 2004-08-18 4:07 UTC (permalink / raw)
On Aug 17, 2004, at 11:59 PM, Bob Kerstetter wrote:
>>>> aleph
>>
>> aleph is the omega snip-off?
>
> aah. spin-off, not snip-off. but anyway, is that what aleph is?
It's even an FAQ: http://www.tex.ac.uk/cgi-bin/texfaq2html?label=aleph,
which says
"The Aleph project aims to build a "usable" version of Omega,
incorporating e-TeX extensions from the NTS project.
Two sets of concerns have provided impetus to the project: first, that
many users need the e-TeX extensions, and they're not on the Omega
development path; and second, that the Omega project is currently
immersed in radical restructuring of Omega, and is not able to be
particularly responsive to user requirements in the short term. In the
longer term, the Aleph project hope that their work will be rendered
irrelevant by the development of Omega proper.
The current pre-release snapshot of Aleph resides on CTAN with the
rather modest name of e-Omega. Follow development by subscribing to the
project mailing list via http://www.ntg.nl/mailman/listinfo/aleph"
Steve
^ permalink raw reply [flat|nested] 14+ messages in thread
* ConTeXt and Aleph
@ 2004-08-17 15:26 Steffen Wolfrum
2004-08-17 15:50 ` Hans Hagen
0 siblings, 1 reply; 14+ messages in thread
From: Steffen Wolfrum @ 2004-08-17 15:26 UTC (permalink / raw)
Hi,
ever so often I read mails by Giuseppe or Idris on Aleph.
Now I also saw that there is a context-manual on aleph.
Does this mean I can use the examples mentions there under ConTeXt?
Running an alephtest.tex file ...
\start \textdir TLT\relax \setups[ward]
\start \textdir BLB\relax \red \setups[ward]
\stop \setups[ward]
\stop
... tells me that "\textdir" is an "Undefined control sequence"
What is missing?
When I installed ConTeXt I executed the following command lines:
mv /Users/steffen/Desktop/cont-tmf.zip /usr/local/teTeX/share/texmf.local
cd /usr/local/teTeX/share/texmf.local
rm tex/context/base/*
rm metapost/context/base/*
unzip -a -L -o cont-tmf.zip
cp /usr/local/teTeX/share/texmf.local/context/config/texexec.rme /usr/local/teTeX/share/texmf.local/context/config/texexec.ini
cp /usr/local/teTeX/share/texmf.local/tex/context/user/cont-sys.rme /usr/local/teTeX/share/texmf.local/tex/context/user/cont-sys.tex
sudo mktexlsr
sudo fmtutil --all
sudo texhash
Do I have to add/change something in order to use ConTeXt and aleph?
As you see I don't know where to start.
Apologies if even my question are wrong!
Thank you,
Steffen Wolfrum
(I am running the latest contextbeta under MacOS X)
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt and Aleph
2004-08-17 15:26 Steffen Wolfrum
@ 2004-08-17 15:50 ` Hans Hagen
2004-08-17 16:14 ` Idris Samawi Hamid
0 siblings, 1 reply; 14+ messages in thread
From: Hans Hagen @ 2004-08-17 15:50 UTC (permalink / raw)
Steffen Wolfrum wrote:
>ever so often I read mails by Giuseppe or Idris on Aleph.
>Now I also saw that there is a context-manual on aleph.
>Does this mean I can use the examples mentions there under ConTeXt?
>
>Running an alephtest.tex file ...
>\start \textdir TLT\relax \setups[ward]
>\start \textdir BLB\relax \red \setups[ward]
>\stop \setups[ward]
>\stop
>... tells me that "\textdir" is an "Undefined control sequence"
>
>
>What is missing?
>
>
probably aleph -)
texexec --make --alone --tex=aleph
texexec yourfile --tex=aleph --output=dpx
(or first line of file: % tex=aleph output=dvipdfmx)
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: ConTeXt and Aleph
2004-08-17 15:50 ` Hans Hagen
@ 2004-08-17 16:14 ` Idris Samawi Hamid
0 siblings, 0 replies; 14+ messages in thread
From: Idris Samawi Hamid @ 2004-08-17 16:14 UTC (permalink / raw)
On Tue, 17 Aug 2004 17:50:58 +0200, Hans Hagen <pragma@wxs.nl> wrote:
> Steffen Wolfrum wrote:
>
>> ever so often I read mails by Giuseppe or Idris on Aleph.
>> Now I also saw that there is a context-manual on aleph.
Really?!? Where is it? (unless it's the same experimental file Hans sent a
few weeks back)
>> Does this mean I can use the examples mentions there under ConTeXt?
>>
>> Running an alephtest.tex file ...
>> \start \textdir TLT\relax \setups[ward]
>> \start \textdir BLB\relax \red \setups[ward]
>> \stop \setups[ward]
>> \stop
>> ... tells me that "\textdir" is an "Undefined control sequence"
>>
>>
>> What is missing?
>>
> probably aleph -)
Is Aleph even available on the Mac now? I know that Alan Hoenig had
problems getting it a few months back...
Best
Idris
--
Professor Idris Samawi Hamid
Department of Philosophy
Colorado State University
Fort Collins, CO 80523
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2004-09-26 15:51 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2004-09-16 18:12 ConTeXt and Aleph Steffen Wolfrum
-- strict thread matches above, loose matches on Subject: below --
2004-09-26 15:51 Steffen Wolfrum
2004-09-19 22:17 Steffen Wolfrum
2004-09-17 8:26 Steffen Wolfrum
2004-09-16 18:13 Steffen Wolfrum
2004-09-16 12:49 Steffen Wolfrum
2004-08-17 16:08 Steffen Wolfrum
2004-08-17 16:24 ` Idris Samawi Hamid
2004-08-18 0:15 ` Bob Kerstetter
2004-08-18 3:59 ` Bob Kerstetter
2004-08-18 4:07 ` Steve Peter
2004-08-17 15:26 Steffen Wolfrum
2004-08-17 15:50 ` Hans Hagen
2004-08-17 16:14 ` Idris Samawi Hamid
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).