* Need some hints to fix my standalon installation
@ 2022-04-20 10:33 Christoph Hintermüller via ntg-context
0 siblings, 0 replies; 10+ messages in thread
From: Christoph Hintermüller via ntg-context @ 2022-04-20 10:33 UTC (permalink / raw)
To: śrīrāma via ntg-context; +Cc: Christoph Hintermüller
[-- Attachment #1: Type: text/plain, Size: 630 bytes --]
Hi
Have updated my standalone installation from one of the 2020 releases
to the latest one running
./first-setup.sh --context=latest --modules=all
Now i see the strange behavior that fraction in second equation is not
typeset instead typesetting math aborts after typesetting the upper
part of the fraction. A short example showing this is attached (pdf,
tex, and log)
Therefore i have the following questions
- would it help to sacrifice the updated standalone installation and
do a fresh install
- What else i would have to check and probably fix to make the math
working as expected
- any thing else to change
[-- Attachment #2: test_strange.tar.bz --]
[-- Type: application/x-bzip-compressed-tar, Size: 11334 bytes --]
[-- Attachment #3: Type: text/plain, Size: 493 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread
* Need some hints to fix my standalon installation
@ 2022-04-20 10:34 Christoph Hintermüller via ntg-context
2022-04-20 15:03 ` Pablo Rodriguez via ntg-context
0 siblings, 1 reply; 10+ messages in thread
From: Christoph Hintermüller via ntg-context @ 2022-04-20 10:34 UTC (permalink / raw)
To: ntg-context; +Cc: Christoph Hintermüller
[-- Attachment #1: Type: text/plain, Size: 854 bytes --]
Hi
Have updated my standalone installation from one of the 2020 releases
to the latest one running
./first-setup.sh --context=latest --modules=all
Now i see the strange behavior that fraction in second equation is not
typeset instead typesetting math aborts after typesetting the upper
part of the fraction. A short example showing this is attached (pdf,
tex, and log)
Therefore i have the following questions
- would it help to sacrifice the updated standalone installation and
do a fresh install
- What else i would have to check and probably fix to make the math
working as expected
- any thing else to change
--
--
Christoph Hintermüller
Dipl.-Ing. Dr. MBA. MSc
JKU Institute of Biomedical Mechatronics
Altenberger Straße 69,
4040 Linz, Austria,
Cell: +43 650 8827347
Tel. +43 732 2468 4813
Email: christoph.hintermueller@jku.at
[-- Attachment #2: test_strange.tar.bz --]
[-- Type: application/x-bzip-compressed-tar, Size: 11334 bytes --]
[-- Attachment #3: Type: text/plain, Size: 493 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Need some hints to fix my standalon installation
2022-04-20 10:34 Christoph Hintermüller via ntg-context
@ 2022-04-20 15:03 ` Pablo Rodriguez via ntg-context
2022-04-20 15:12 ` Mikael Sundqvist via ntg-context
0 siblings, 1 reply; 10+ messages in thread
From: Pablo Rodriguez via ntg-context @ 2022-04-20 15:03 UTC (permalink / raw)
To: Christoph Hintermüller via ntg-context; +Cc: Pablo Rodriguez
On 4/20/22 12:34, Christoph Hintermüller via ntg-context wrote:
> Hi
> Have updated my standalone installation from one of the 2020 releases
> to the latest one running
>
> ./first-setup.sh --context=latest --modules=all
Hi Christoph,
sorry for the obvious suggestion «post facto»: never update ConTeXt
without a backup first.
> [...]
> Therefore i have the following questions
> - would it help to sacrifice the updated standalone installation and
> do a fresh install
I don’t think it would work, since it only works with LuaMetaTeX.
I got the same results (in Windows [because I cannot make it work in
Linux]) with LuaTeX 1.15 (the one that comes with ConTeXt LMTX).
My suggestion would be a fresh install (in a different directory, no
need to remove anything) of ConTeXt LMTX.
> - What else i would have to check and probably fix to make the math
> working as expected
Math is being improved in ConTeXt these days. It might be a bug.
I wonder whether Mikael or Hans could review your issue.
Just in case it might help,
Pablo
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Need some hints to fix my standalon installation
2022-04-20 15:03 ` Pablo Rodriguez via ntg-context
@ 2022-04-20 15:12 ` Mikael Sundqvist via ntg-context
2022-04-20 17:07 ` Christoph Hintermüller via ntg-context
0 siblings, 1 reply; 10+ messages in thread
From: Mikael Sundqvist via ntg-context @ 2022-04-20 15:12 UTC (permalink / raw)
To: mailing list for ConTeXt users; +Cc: Mikael Sundqvist
On Wed, Apr 20, 2022 at 5:03 PM Pablo Rodriguez via ntg-context
<ntg-context@ntg.nl> wrote:
>
> On 4/20/22 12:34, Christoph Hintermüller via ntg-context wrote:
> > Hi
> > Have updated my standalone installation from one of the 2020 releases
> > to the latest one running
> >
> > ./first-setup.sh --context=latest --modules=all
>
> Hi Christoph,
>
> sorry for the obvious suggestion «post facto»: never update ConTeXt
> without a backup first.
>
> > [...]
> > Therefore i have the following questions
> > - would it help to sacrifice the updated standalone installation and
> > do a fresh install
>
> I don’t think it would work, since it only works with LuaMetaTeX.
>
> I got the same results (in Windows [because I cannot make it work in
> Linux]) with LuaTeX 1.15 (the one that comes with ConTeXt LMTX).
>
> My suggestion would be a fresh install (in a different directory, no
> need to remove anything) of ConTeXt LMTX.
>
> > - What else i would have to check and probably fix to make the math
> > working as expected
>
> Math is being improved in ConTeXt these days. It might be a bug.
>
> I wonder whether Mikael or Hans could review your issue.
>
> Just in case it might help,
>
> Pablo
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://context.aanhet.net
> archive : https://bitbucket.org/phg/context-mirror/commits/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
The strange thing with fractions seems to be due to the parameter
FractionNumeratorDisplayStyleShiftUp in lm.lfg. If you always set it
to 600, it seems to work also for luatex. (This will be fixed.)
Another thing: Instead of using \over, I suggest that you use \frac
(less surprises). Something like:
\starttext
\startformula
a=b + 1
\stopformula
\startformula
a = \frac{ b + \mu }{ c }
\stopformula
\startformula
a = \frac{\frac{ b + \mu }{ c } + e}{ d + i }
\stopformula
\stoptext
/Mikael
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: Need some hints to fix my standalon installation
2022-04-20 15:12 ` Mikael Sundqvist via ntg-context
@ 2022-04-20 17:07 ` Christoph Hintermüller via ntg-context
2022-04-20 17:18 ` Hans Hagen via ntg-context
0 siblings, 1 reply; 10+ messages in thread
From: Christoph Hintermüller via ntg-context @ 2022-04-20 17:07 UTC (permalink / raw)
To: ntg-context; +Cc: Christoph Hintermüller
[-- Attachment #1: Type: text/plain, Size: 1486 bytes --]
Hi Michael
[Inline Response to message by Mikael Sundqvist via ntg-context, Mi,
2022-04-20 17:12 +0200: Answers and comments below corresponding cited
paragraphs.]
>
> The strange thing with fractions seems to be due to the parameter
> FractionNumeratorDisplayStyleShiftUp in lm.lfg. If you always set it
> to 600, it seems to work also for luatex. (This will be fixed.)
>
> Another thing: Instead of using \over, I suggest that you use \frac
> (less surprises). Something like:
>
> \starttext
> \startformula
> a=b + 1
> \stopformula
>
> \startformula
> a = \frac{ b + \mu }{ c }
> \stopformula
>
> \startformula
> a = \frac{\frac{ b + \mu }{ c } + e}{ d + i }
> \stopformula
> \stoptext
>
Thank you very much for the hints. \frac didn't help either even after
moving broken installation aside and doing a fresh install with
sh ./first-setup.sh --modules=all --context=latest
Results still similar see attached.
> /Mikael
> _____________________________________________________________________
> ______________
> If your question is of interest to others as well, please add an
> entry to the Wiki!
>
> maillist : ntg-context@ntg.nl /
> http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://context.aanhet.net
> archive : https://bitbucket.org/phg/context-mirror/commits/
> wiki : http://contextgarden.net
> _____________________________________________________________________
> ______________
[-- Attachment #2: test_strange.tar.bz --]
[-- Type: application/x-bzip-compressed-tar, Size: 10047 bytes --]
[-- Attachment #3: Type: text/plain, Size: 493 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: Need some hints to fix my standalon installation
2022-04-20 17:07 ` Christoph Hintermüller via ntg-context
@ 2022-04-20 17:18 ` Hans Hagen via ntg-context
2022-04-20 17:22 ` Christoph Hintermüller via ntg-context
0 siblings, 1 reply; 10+ messages in thread
From: Hans Hagen via ntg-context @ 2022-04-20 17:18 UTC (permalink / raw)
To: Christoph Hintermüller via ntg-context; +Cc: Hans Hagen
On 4/20/2022 7:07 PM, Christoph Hintermüller via ntg-context wrote:
> Hi Michael
>
> [Inline Response to message by Mikael Sundqvist via ntg-context, Mi,
> 2022-04-20 17:12 +0200: Answers and comments below corresponding cited
> paragraphs.]
>
>> The strange thing with fractions seems to be due to the parameter
>> FractionNumeratorDisplayStyleShiftUp in lm.lfg. If you always set it
>> to 600, it seems to work also for luatex. (This will be fixed.)
>>
>> Another thing: Instead of using \over, I suggest that you use \frac
>> (less surprises). Something like:
>>
>> \starttext
>> \startformula
>> a=b + 1
>> \stopformula
>>
>> \startformula
>> a = \frac{ b + \mu }{ c }
>> \stopformula
>>
>> \startformula
>> a = \frac{\frac{ b + \mu }{ c } + e}{ d + i }
>> \stopformula
>> \stoptext
>
> Thank you very much for the hints. \frac didn't help either even after
> moving broken installation aside and doing a fresh install with
>
> sh ./first-setup.sh --modules=all --context=latest
>
>
> Results still similar see attached.
We had to adapt the lfg file for lm (other fonts are ok) so i'll make an
update.
If you're in a hurry, in lm.lfg:
parameters = {
FractionNumeratorDisplayStyleShiftUp = 600, -- used to be a
function
NoLimitSupFactor = 0,
NoLimitSubFactor = 900,
-- AccentBaseHeight = 0,
AccentBaseDepth = 50,
},
can be adapted.
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: Need some hints to fix my standalon installation
2022-04-20 17:18 ` Hans Hagen via ntg-context
@ 2022-04-20 17:22 ` Christoph Hintermüller via ntg-context
2022-04-20 17:41 ` Pablo Rodriguez via ntg-context
0 siblings, 1 reply; 10+ messages in thread
From: Christoph Hintermüller via ntg-context @ 2022-04-20 17:22 UTC (permalink / raw)
To: ntg-context; +Cc: Christoph Hintermüller
Hi Hans
[Inline Response to message by Hans Hagen via ntg-context, Mi, 2022-04-
20 19:18 +0200: Answers and comments below corresponding cited
paragraphs.]
> We had to adapt the lfg file for lm (other fonts are ok) so i'll make
> an
> update.
>
> If you're in a hurry, in lm.lfg:
>
> parameters = {
> FractionNumeratorDisplayStyleShiftUp = 600, -- used to
> be a
> function
> NoLimitSupFactor = 0,
> NoLimitSubFactor = 900,
> -- AccentBaseHeight = 0,
> AccentBaseDepth = 50,
> },
>
> can be adapted.
>
That's fine. As soon as post that update is ready for pulling I will
pull.
Till then i can wait.
Best
Xristoph
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread* Re: Need some hints to fix my standalon installation
2022-04-20 17:22 ` Christoph Hintermüller via ntg-context
@ 2022-04-20 17:41 ` Pablo Rodriguez via ntg-context
2022-04-20 18:50 ` Taco Hoekwater via ntg-context
0 siblings, 1 reply; 10+ messages in thread
From: Pablo Rodriguez via ntg-context @ 2022-04-20 17:41 UTC (permalink / raw)
To: Christoph Hintermüller via ntg-context; +Cc: Pablo Rodriguez
On 4/20/22 19:22, Christoph Hintermüller via ntg-context wrote:
>
> That's fine. As soon as post that update is ready for pulling I will
> pull.
> Till then i can wait.
Hi Christoph,
to check when there is a new release I use:
curl -I https://lmtx.pragma-ade.com/install-lmtx/texmf-context.zip 2>&1
| grep -i Last-Modified
Just in case it might help you,
Pablo
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Need some hints to fix my standalon installation
2022-04-20 17:41 ` Pablo Rodriguez via ntg-context
@ 2022-04-20 18:50 ` Taco Hoekwater via ntg-context
2022-04-20 19:17 ` J. Hagen via ntg-context
0 siblings, 1 reply; 10+ messages in thread
From: Taco Hoekwater via ntg-context @ 2022-04-20 18:50 UTC (permalink / raw)
To: mailing list for ConTeXt users; +Cc: Taco Hoekwater
Hi,
I have an rsync cron job running each hour that alerts me if there is a new upload. If nobody objects, I could direct the cron notification email to the list?
Taco
> On 20 Apr 2022, at 19:41, Pablo Rodriguez via ntg-context <ntg-context@ntg.nl> wrote:
>
> On 4/20/22 19:22, Christoph Hintermüller via ntg-context wrote:
>>
>> That's fine. As soon as post that update is ready for pulling I will
>> pull.
>> Till then i can wait.
>
> Hi Christoph,
>
> to check when there is a new release I use:
>
> curl -I https://lmtx.pragma-ade.com/install-lmtx/texmf-context.zip 2>&1
> | grep -i Last-Modified
>
> Just in case it might help you,
>
> Pablo
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://context.aanhet.net
> archive : https://bitbucket.org/phg/context-mirror/commits/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2022-04-20 19:17 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2022-04-20 10:33 Need some hints to fix my standalon installation Christoph Hintermüller via ntg-context
2022-04-20 10:34 Christoph Hintermüller via ntg-context
2022-04-20 15:03 ` Pablo Rodriguez via ntg-context
2022-04-20 15:12 ` Mikael Sundqvist via ntg-context
2022-04-20 17:07 ` Christoph Hintermüller via ntg-context
2022-04-20 17:18 ` Hans Hagen via ntg-context
2022-04-20 17:22 ` Christoph Hintermüller via ntg-context
2022-04-20 17:41 ` Pablo Rodriguez via ntg-context
2022-04-20 18:50 ` Taco Hoekwater via ntg-context
2022-04-20 19:17 ` J. Hagen via ntg-context
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).