* Re: LilyPond module 2009-06-05 [not found] <mailman.1.1244196001.20416.ntg-context@ntg.nl> @ 2009-06-05 14:13 ` Vyatcheslav Yatskovsky 2009-06-09 4:35 ` Henning Hraban Ramm 2009-06-07 16:10 ` ntg-context Digest, Vol 60, Issue 25 Abhishek Seth 1 sibling, 1 reply; 7+ messages in thread From: Vyatcheslav Yatskovsky @ 2009-06-05 14:13 UTC (permalink / raw) To: ntg-context Thanks, Hraban But my problem (under Windows) persists: no eps or pdfs are created. Only "lily1-lilypond-1.tmp" and "lily1-lilypond-1.tmp.md5" in "lilytemp" folder. Installing GhostScript didn't help. Regards, Vyatcheslav ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: LilyPond module 2009-06-05 2009-06-05 14:13 ` LilyPond module 2009-06-05 Vyatcheslav Yatskovsky @ 2009-06-09 4:35 ` Henning Hraban Ramm 2009-06-09 6:13 ` Richard Chonak 0 siblings, 1 reply; 7+ messages in thread From: Henning Hraban Ramm @ 2009-06-09 4:35 UTC (permalink / raw) To: mailing list for ConTeXt users Am 2009-06-05 um 16:13 schrieb Vyatcheslav Yatskovsky: > But my problem (under Windows) persists: no eps or pdfs are created. > Only "lily1-lilypond-1.tmp" and "lily1-lilypond-1.tmp.md5" in > "lilytemp" folder. > Installing GhostScript didn't help. Sorry for the delay, and sorry, but I can't help you on Windows. Since others have it working it's probably a problem of your setup. Greetlings from Lake Constance! Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer) ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: LilyPond module 2009-06-05 2009-06-09 4:35 ` Henning Hraban Ramm @ 2009-06-09 6:13 ` Richard Chonak 2009-06-09 9:00 ` Henning Hraban Ramm 0 siblings, 1 reply; 7+ messages in thread From: Richard Chonak @ 2009-06-09 6:13 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1696 bytes --] Vyatcheslav, can you record all the output from your pdflualatex command, and add it to your e-mail? It may contain an error message that would clarify why Lilypond is not being invoked successfully. I had a similar problem on Linux, and had to update to the latest version of the ConTeXt lilypond module to get things working... and then I had to update ConTeXt... and to make that work, I had to update luatex... but eventually it worked. --RC ________________________________ From: Henning Hraban Ramm <hraban@fiee.net> To: mailing list for ConTeXt users <ntg-context@ntg.nl> Sent: Tuesday, June 9, 2009 12:35:00 AM Subject: Re: [NTG-context] LilyPond module 2009-06-05 Am 2009-06-05 um 16:13 schrieb Vyatcheslav Yatskovsky: > But my problem (under Windows) persists: no eps or pdfs are created. Only "lily1-lilypond-1.tmp" and "lily1-lilypond-1.tmp.md5" in "lilytemp" folder. > Installing GhostScript didn't help. Sorry for the delay, and sorry, but I can't help you on Windows. Since others have it working it's probably a problem of your setup. Greetlings from Lake Constance! Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer) ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl/ http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ [-- Attachment #1.2: Type: text/html, Size: 3068 bytes --] [-- Attachment #2: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: LilyPond module 2009-06-05 2009-06-09 6:13 ` Richard Chonak @ 2009-06-09 9:00 ` Henning Hraban Ramm 2009-06-09 17:58 ` Richard Chonak 0 siblings, 1 reply; 7+ messages in thread From: Henning Hraban Ramm @ 2009-06-09 9:00 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 799 bytes --] Am 2009-06-09 um 08:13 schrieb Richard Chonak: > Vyatcheslav, can you record all the output from your pdflualatex > command, and add it to your e-mail? It may contain an error message > that would clarify why Lilypond is not being invoked successfully. Unfortunately there's normally no error message if a binary isn't found/called. > I had a similar problem on Linux, and had to update to the latest > version of the ConTeXt lilypond module to get things working... and > then I had to update ConTeXt... and to make that work, I had to > update luatex... but eventually it worked. That's normal with everything regarding ConTeXt MkIV. Greetlings from Lake Constance! Hraban --- http://www.fiee.net/texnique/ http://wiki.contextgarden.net https://www.cacert.org (I'm an assurer) [-- Attachment #1.2: Signierter Teil der Nachricht --] [-- Type: application/pgp-signature, Size: 194 bytes --] [-- Attachment #2: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: LilyPond module 2009-06-05 2009-06-09 9:00 ` Henning Hraban Ramm @ 2009-06-09 17:58 ` Richard Chonak 0 siblings, 0 replies; 7+ messages in thread From: Richard Chonak @ 2009-06-09 17:58 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 509 bytes --] Am 2009-06-09 um 08:13 schrieb Richard Chonak: >> Vyatcheslav, can you record all the output from your pdflualatex command, and add it to your e-mail? It may contain an error message that would clarify why Lilypond is not being invoked successfully. und Henning schrieb: > Unfortunately there's normally no error message if a binary isn't found/called. Of course; but in my case last week, lilypond was being found and called with an obsolete command-line switch, so it did produce an error message. --RC [-- Attachment #1.2: Type: text/html, Size: 922 bytes --] [-- Attachment #2: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ntg-context Digest, Vol 60, Issue 25 [not found] <mailman.1.1244196001.20416.ntg-context@ntg.nl> 2009-06-05 14:13 ` LilyPond module 2009-06-05 Vyatcheslav Yatskovsky @ 2009-06-07 16:10 ` Abhishek Seth 2009-06-07 16:11 ` Abhishek Seth 1 sibling, 1 reply; 7+ messages in thread From: Abhishek Seth @ 2009-06-07 16:10 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 5309 bytes --] Hi, I have emacs 23.0.91.1 on Windows XP. I downloaded cedet-1.0pre6 and followed the instructions in the file cedet-build.el, ie 1) M-x eval-buffer 2) M-x cedet-build-in-default-emacs I get following status report from the build process: CEDET BYTE COMPILATION STATUS: Step 1: Byte compile EIEIO...not needed Step 2: EDE Autloads...done. Step 3: Semantic Autloads...done. Step 4: SRecode Autloads...done. Step 5: Load common/cedet.el ...done Step 6: Turning on EDE ... During step 6, i get the following message in the echo area: wrong type argument: number-or-marker-p (2048 1 . 59092) Could someone suggest a solution for this? On Fri, Jun 5, 2009 at 3:30 PM, <ntg-context-request@ntg.nl> wrote: > Send ntg-context mailing list submissions to > ntg-context@ntg.nl > > To subscribe or unsubscribe via the World Wide Web, visit > http://www.ntg.nl/mailman/listinfo/ntg-context > or, via email, send a message with subject or body 'help' to > ntg-context-request@ntg.nl > > You can reach the person managing the list at > ntg-context-owner@ntg.nl > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of ntg-context digest..." > > > Today's Topics: > > 1. Bug in mkiv math mode: missing \longrightarrow (Otared Kavian) > 2. LilyPond module 2009-06-05 (Henning Hraban Ramm) > 3. Re: Bug in treatment of spaces in mathmode mkiv (Hans Hagen) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Fri, 5 Jun 2009 10:08:45 +0200 > From: Otared Kavian <otared@gmail.com> > Subject: [NTG-context] Bug in mkiv math mode: missing \longrightarrow > To: mailing list for ConTeXt users <ntg-context@ntg.nl> > Message-ID: <670838DC-F3A0-472E-B178-F4F9B85F9CDA@gmail.com> > Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes > > Hi Hans, > > Testing your last night's beta, > LuaTeX, Version beta-0.40.1-2009050813 (Web2C 7.5.7) > ConTeXt ver: 2009.06.04 22:20 MKIV fmt: 2009.6.4 int: english/ > english > I noticed that \longrightarrow is missing in mkiv, while everything is > correct in mkii. > Here is a minimal example: > > %%% begin example > \starttext > Consider a continuous function $f : (0,1) \longrightarrow E$, where $E > $ is a Banach space, as above. > > Consider a continuous function $f : (0,1) \rightarrow E$, where $E$ is > a Banach space, as above. > \stoptext > > %%% end example > > In mkiv nothing appears for \longrightarrow, although the typesetting > goes through. > > Thanks for your attention: OK > > > ------------------------------ > > Message: 2 > Date: Fri, 5 Jun 2009 10:19:28 +0200 > From: Henning Hraban Ramm <hraban@fiee.net> > Subject: [NTG-context] LilyPond module 2009-06-05 > To: mailing ConTeXt users list for <ntg-context@ntg.nl> > Message-ID: <C4E18F24-4283-4A88-AB40-01654F58124E@fiee.net> > Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes > > Just released the latest version with some fixes: > - pstopdf is only called if there's no pdf created (seems like > LilyPond creates PDFs by itself even in EPS mode now) > - before trying to move a file, the target gets deleted if it already > exists > - some more code cleanup > > Is someone in need of a MkII version? (I could make that, but only > without the file system features.) > > BTW Mojca is planning for a general tempdir feature for all modules; > probably the setup syntax will change a bit if it's ready. > > > Greetlings from Lake Constance! > Hraban > --- > http://www.fiee.net/texnique/ > http://wiki.contextgarden.net > https://www.cacert.org (I'm an assurer) > > > > ------------------------------ > > Message: 3 > Date: Fri, 05 Jun 2009 10:37:07 +0200 > From: Hans Hagen <pragma@wxs.nl> > Subject: Re: [NTG-context] Bug in treatment of spaces in mathmode mkiv > To: mailing list for ConTeXt users <ntg-context@ntg.nl> > Message-ID: <4A28D933.6000603@wxs.nl> > Content-Type: text/plain; charset=windows-1252; format=flowed > > Aditya Mahajan wrote: > > > colon needs a bit more care. The literal : should be a mathrel, while > > \colon should be a punctuation. I do not know how to set this using > > mathspec. > > hm, we had two mathname=colon's, so i removed the 0x003A > > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com > | www.pragma-pod.nl > ----------------------------------------------------------------- > > > ------------------------------ > > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : https://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > > ___________________________________________________________________________________ > > > End of ntg-context Digest, Vol 60, Issue 25 > ******************************************* > [-- Attachment #1.2: Type: text/html, Size: 7450 bytes --] [-- Attachment #2: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
* Re: ntg-context Digest, Vol 60, Issue 25 2009-06-07 16:10 ` ntg-context Digest, Vol 60, Issue 25 Abhishek Seth @ 2009-06-07 16:11 ` Abhishek Seth 0 siblings, 0 replies; 7+ messages in thread From: Abhishek Seth @ 2009-06-07 16:11 UTC (permalink / raw) To: ntg-context [-- Attachment #1.1: Type: text/plain, Size: 5669 bytes --] Please ignore the previous mail... Accidentally sent to the wrong mailing list. Regards Abhishek On Sun, Jun 7, 2009 at 9:40 PM, Abhishek Seth <abhseth@gmail.com> wrote: > Hi, > > I have emacs 23.0.91.1 on Windows XP. I downloaded cedet-1.0pre6 and > followed the instructions in the file cedet-build.el, ie > 1) M-x eval-buffer > 2) M-x cedet-build-in-default-emacs > > I get following status report from the build process: > > CEDET BYTE COMPILATION STATUS: > > Step 1: Byte compile EIEIO...not needed > Step 2: EDE Autloads...done. > Step 3: Semantic Autloads...done. > Step 4: SRecode Autloads...done. > Step 5: Load common/cedet.el ...done > Step 6: Turning on EDE ... > > During step 6, i get the following message in the echo area: wrong type > argument: number-or-marker-p (2048 1 . 59092) > > Could someone suggest a solution for this? > > > > On Fri, Jun 5, 2009 at 3:30 PM, <ntg-context-request@ntg.nl> wrote: > >> Send ntg-context mailing list submissions to >> ntg-context@ntg.nl >> >> To subscribe or unsubscribe via the World Wide Web, visit >> http://www.ntg.nl/mailman/listinfo/ntg-context >> or, via email, send a message with subject or body 'help' to >> ntg-context-request@ntg.nl >> >> You can reach the person managing the list at >> ntg-context-owner@ntg.nl >> >> When replying, please edit your Subject line so it is more specific >> than "Re: Contents of ntg-context digest..." >> >> >> Today's Topics: >> >> 1. Bug in mkiv math mode: missing \longrightarrow (Otared Kavian) >> 2. LilyPond module 2009-06-05 (Henning Hraban Ramm) >> 3. Re: Bug in treatment of spaces in mathmode mkiv (Hans Hagen) >> >> >> ---------------------------------------------------------------------- >> >> Message: 1 >> Date: Fri, 5 Jun 2009 10:08:45 +0200 >> From: Otared Kavian <otared@gmail.com> >> Subject: [NTG-context] Bug in mkiv math mode: missing \longrightarrow >> To: mailing list for ConTeXt users <ntg-context@ntg.nl> >> Message-ID: <670838DC-F3A0-472E-B178-F4F9B85F9CDA@gmail.com> >> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes >> >> Hi Hans, >> >> Testing your last night's beta, >> LuaTeX, Version beta-0.40.1-2009050813 (Web2C 7.5.7) >> ConTeXt ver: 2009.06.04 22:20 MKIV fmt: 2009.6.4 int: english/ >> english >> I noticed that \longrightarrow is missing in mkiv, while everything is >> correct in mkii. >> Here is a minimal example: >> >> %%% begin example >> \starttext >> Consider a continuous function $f : (0,1) \longrightarrow E$, where $E >> $ is a Banach space, as above. >> >> Consider a continuous function $f : (0,1) \rightarrow E$, where $E$ is >> a Banach space, as above. >> \stoptext >> >> %%% end example >> >> In mkiv nothing appears for \longrightarrow, although the typesetting >> goes through. >> >> Thanks for your attention: OK >> >> >> ------------------------------ >> >> Message: 2 >> Date: Fri, 5 Jun 2009 10:19:28 +0200 >> From: Henning Hraban Ramm <hraban@fiee.net> >> Subject: [NTG-context] LilyPond module 2009-06-05 >> To: mailing ConTeXt users list for <ntg-context@ntg.nl> >> Message-ID: <C4E18F24-4283-4A88-AB40-01654F58124E@fiee.net> >> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes >> >> Just released the latest version with some fixes: >> - pstopdf is only called if there's no pdf created (seems like >> LilyPond creates PDFs by itself even in EPS mode now) >> - before trying to move a file, the target gets deleted if it already >> exists >> - some more code cleanup >> >> Is someone in need of a MkII version? (I could make that, but only >> without the file system features.) >> >> BTW Mojca is planning for a general tempdir feature for all modules; >> probably the setup syntax will change a bit if it's ready. >> >> >> Greetlings from Lake Constance! >> Hraban >> --- >> http://www.fiee.net/texnique/ >> http://wiki.contextgarden.net >> https://www.cacert.org (I'm an assurer) >> >> >> >> ------------------------------ >> >> Message: 3 >> Date: Fri, 05 Jun 2009 10:37:07 +0200 >> From: Hans Hagen <pragma@wxs.nl> >> Subject: Re: [NTG-context] Bug in treatment of spaces in mathmode mkiv >> To: mailing list for ConTeXt users <ntg-context@ntg.nl> >> Message-ID: <4A28D933.6000603@wxs.nl> >> Content-Type: text/plain; charset=windows-1252; format=flowed >> >> Aditya Mahajan wrote: >> >> > colon needs a bit more care. The literal : should be a mathrel, while >> > \colon should be a punctuation. I do not know how to set this using >> > mathspec. >> >> hm, we had two mathname=colon's, so i removed the 0x003A >> >> >> ----------------------------------------------------------------- >> Hans Hagen | PRAGMA ADE >> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands >> tel: 038 477 53 69 | fax: 038 477 53 74 | www.pragma-ade.com >> | www.pragma-pod.nl >> ----------------------------------------------------------------- >> >> >> ------------------------------ >> >> >> ___________________________________________________________________________________ >> If your question is of interest to others as well, please add an entry to >> the Wiki! >> >> maillist : ntg-context@ntg.nl / >> http://www.ntg.nl/mailman/listinfo/ntg-context >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >> archive : https://foundry.supelec.fr/projects/contextrev/ >> wiki : http://contextgarden.net >> >> ___________________________________________________________________________________ >> >> >> End of ntg-context Digest, Vol 60, Issue 25 >> ******************************************* >> > > [-- Attachment #1.2: Type: text/html, Size: 8165 bytes --] [-- Attachment #2: Type: text/plain, Size: 487 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : https://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 7+ messages in thread
end of thread, other threads:[~2009-06-09 17:58 UTC | newest] Thread overview: 7+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <mailman.1.1244196001.20416.ntg-context@ntg.nl> 2009-06-05 14:13 ` LilyPond module 2009-06-05 Vyatcheslav Yatskovsky 2009-06-09 4:35 ` Henning Hraban Ramm 2009-06-09 6:13 ` Richard Chonak 2009-06-09 9:00 ` Henning Hraban Ramm 2009-06-09 17:58 ` Richard Chonak 2009-06-07 16:10 ` ntg-context Digest, Vol 60, Issue 25 Abhishek Seth 2009-06-07 16:11 ` Abhishek Seth
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).