Write a long chapter title in two lines

Write a long chapter title in two lines

[Jeong Dal via ntg-context]

[-- Attachment #1.1: Type: text/plain, Size: 1371 bytes --]

Dear all,

A few days ago, I sent an email as follows. But it is linked to another subject because I choose reply of another subject.
So, I send the same mail again.

Thank you for reading.

Best regards,
Dalyoung

**********
I’d like to write a long chapter title in two lines if it is longer than the textwidth.
It is OK when I use just bigger fonts.

But it writes the long title in one line if I use outlined font for title as in MWE.

Is there a way to write it in two lines using the outlined font?

Thanks,

Best regards,

Dalyoung

\startuseMPgraphic{outlineT}
      draw outlinetext.b (\MPvar{tt})
      (withcolor .75white)
      (withcolor .725blue withpen pencircle scaled .75pt);%\MPvar{thick});
\stopuseMPgraphic
\definefont[BigFontOne][NotoSansCJKkr-Bold sa 4]
\define[1]\outlineTitle{\useMPgraphic{outlineT}{tt="#1"}}

\setuphead[chapter]
[textcommand=\outlineTitle,
 style=\BigFontOne,
 numbercommand=\outlineTitle,
% align = middle,
 number=yes]

\setupexternalfigures[location={default,local,global}]
%\definefont[fancy][Zapfino at 24pt]

\starttext
\startchapter[title={Very Long Long Long Title}]
\startcombination[3*1]
 {\externalfigure[cow]   [combination]}{cow}
 {\externalfigure[mill]  [combination]}{mill}
 {\externalfigure[hacker][combination]}{hacker}
\stopcombination
\stopchapter
\stoptext

[-- Attachment #1.2: Type: text/html, Size: 10487 bytes --]

[-- Attachment #2: Type: text/plain, Size: 496 bytes --]

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : https://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : https://contextgarden.net
___________________________________________________________________________________

Re: Write a long chapter title in two lines

[Hans Hagen via ntg-context]

On 8/19/2022 3:03 AM, Jeong Dal wrote:
> Dear all,
> 
> A few days ago, I sent an email as follows. But it is linked to another subject because I choose reply of another subject.
> So, I send the same mail again.
\startuseMPgraphic{outlineT}
     draw lmt_outline [
         text      = \MPvar{tt},
         kind      = "both",
         width     = 12cm,
         align     = "middle",
         fillcolor = "gray",
         drawcolor = "blue"
     ] ;


-----------------------------------------------------------------
                                           Hans Hagen | PRAGMA ADE
               Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
        tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : https://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : https://contextgarden.net
___________________________________________________________________________________

Write a long chapter title in two lines

[Jeong Dal via ntg-context]

[-- Attachment #1.1: Type: text/plain, Size: 3626 bytes --]

Dear all,

I’d like to write a long chapter title in two lines if it is longer than the textwidth.
It is OK when I use just bigger fonts.

But it writes the long title in one line if I use outlined font for title as in MWE.

Is there a way to write it in two lines using the outlined font?

Thanks,

Best regards,

Dalyoung

\startuseMPgraphic{outlineT}
      draw outlinetext.b (\MPvar{tt})
      (withcolor .75white)
      (withcolor .725blue withpen pencircle scaled .75pt);%\MPvar{thick});
\stopuseMPgraphic
\definefont[BigFontOne][NotoSansCJKkr-Bold sa 4]
\define[1]\outlineTitle{\useMPgraphic{outlineT}{tt="#1"}}

\setuphead[chapter]
[textcommand=\outlineTitle,
 style=\BigFontOne,
 numbercommand=\outlineTitle,
% align = middle,
 number=yes]

\setupexternalfigures[location={default,local,global}]
%\definefont[fancy][Zapfino at 24pt]

\starttext
\startchapter[title={Very Long Long Long Title}]
\startcombination[3*1]
 {\externalfigure[cow]   [combination]}{cow}
 {\externalfigure[mill]  [combination]}{mill}
 {\externalfigure[hacker][combination]}{hacker}
\stopcombination
\stopchapter
\stoptext


> On Aug 15, 2022, at 7:42 PM, Pablo Rodriguez via ntg-context <ntg-context@ntg.nl> wrote:
> 
> Dear list,
> 
> adapting a the sample from mkxl/page-str.mkxl (and code from the list),
> I came with the following sample:
> 
>  \setuppapersize[A6]
>  \showgrid
>  %\setuplayout[grid=yes]
>  \starttext
>  \input tufte
>  \startoutputstream[es]
>   \dorecurse{25}
>    {\startlanguage[es]\input cervantes-es\stoplanguage%
>      \par\pushoutputstream}
>  \enableoutputstream[en]
>   \dorecurse{25}
>    {\input zapf\par\pushoutputstream}
>  \disableoutputstream
>  \stopoutputstream
>  \synchronizestreams[es,en]
>  \page \flushoutputstream[es]
>  \page \flushoutputstream[en]
>  \stoptext
> 
> To reorder pages, I rename the output to "wg.pdf" and run the following
> code:
> 
>  \setuppapersize[A6]
>  \setuplayout[page]
>  \starttext
>  \dorecurse{26}
>  {\ifnum\recurselevel = 1
>    \externalfigure[wg.pdf][page=\recurselevel]\else
>    \externalfigure[wg.pdf][page=\recurselevel]
>    \externalfigure[wg.pdf][page={\the\numexpr \recurselevel + 25}]\fi}
>  \stoptext
> 
> I’m afraid that the paragraph mistmatch is clear (the number of pages is
> way different for each versions).
> 
> Using the grid, the mismatch is not so evident (but there is still a
> different number of pages for each version).
> 
> Page reordering would be in this case:
> 
>  \setuppapersize[A6]
>  \setuplayout[page]
>  \starttext
>  \dorecurse{20}
>  {\ifnum\recurselevel = 1
>    \externalfigure[wg.pdf][page=\recurselevel]\else
>    \externalfigure[wg.pdf][page=\recurselevel]
>    \externalfigure[wg.pdf][page={\the\numexpr \recurselevel + 19}]\fi}
>  \stoptext
> 
> I would need that for a bilingual edition. I don’t mind reodering the
> pages (if there is no other option).
> 
> But what am I doing wrong not to get synced text streams for facing pages?
> 
> Many thanks for your help,
> 
> Pablo
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
> 
> maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context
> webpage  : https://www.pragma-ade.nl / http://context.aanhet.net
> archive  : https://bitbucket.org/phg/context-mirror/commits/
> wiki     : https://contextgarden.net
> ___________________________________________________________________________________


[-- Attachment #1.2: Type: text/html, Size: 11404 bytes --]

[-- Attachment #2: Type: text/plain, Size: 496 bytes --]

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / https://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : https://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : https://contextgarden.net
___________________________________________________________________________________