* Getting the filename which is being typeset
@ 2020-12-01 13:45 Otared Kavian
2020-12-01 14:25 ` Tomas Hala
0 siblings, 1 reply; 11+ messages in thread
From: Otared Kavian @ 2020-12-01 13:45 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hi everyone,
I have to typeset a few files which get each an input file named in a certain way. For instance, a file named « myfile.tex » in which another file named « myfile-buffer.tex » is used as an \input file, as in
% content of myfile.tex
%%%%%
\starttext
This is a test.
\input myfile-buffer.tex
\stoptext
%%%%%
When typesetting « myfile.tex » I wonder whether it is possible to get the name of the file without its suffix, that is to get « myfile », with a command such as
\getNameOfCurrentFile
and then be able to replace the above snippet by:
% desired content of myfile.tex
%%%%%
\starttext
This is a test.
\input \getNameOfCurrentFile-buffer.tex
\stoptext
%%%%%
Best regards and thanks for any hint: Otared K.
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Getting the filename which is being typeset
2020-12-01 13:45 Getting the filename which is being typeset Otared Kavian
@ 2020-12-01 14:25 ` Tomas Hala
2020-12-01 15:20 ` Otared Kavian
0 siblings, 1 reply; 11+ messages in thread
From: Tomas Hala @ 2020-12-01 14:25 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hi Otared,
try \jobname.
Best wishes,
Tomáš
Tue, Dec 01, 2020 ve 02:45:18PM +0100 Otared Kavian napsal(a):
# Hi everyone,
#
# I have to typeset a few files which get each an input file named in a certain way. For instance, a file named « myfile.tex » in which another file named « myfile-buffer.tex » is used as an \input file, as in
#
# % content of myfile.tex
# %%%%%
# \starttext
# This is a test.
#
# \input myfile-buffer.tex
# \stoptext
# %%%%%
#
# When typesetting « myfile.tex » I wonder whether it is possible to get the name of the file without its suffix, that is to get « myfile », with a command such as
# \getNameOfCurrentFile
# and then be able to replace the above snippet by:
#
# % desired content of myfile.tex
# %%%%%
# \starttext
# This is a test.
#
# \input \getNameOfCurrentFile-buffer.tex
# \stoptext
# %%%%%
#
# Best regards and thanks for any hint: Otared K.
# ___________________________________________________________________________________
# If your question is of interest to others as well, please add an entry to the Wiki!
#
# maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
# webpage : http://www.pragma-ade.nl / http://context.aanhet.net
# archive : https://bitbucket.org/phg/context-mirror/commits/
# wiki : http://contextgarden.net
# ___________________________________________________________________________________
Tomáš Hála
--------------------------------------------------------------------
Mendelova univerzita, Provozně ekonomická fakulta, ústav informatiky
Zemědělská 1, CZ-613 00 Brno, tel. +420 545 13 22 28
--------------------------------------------------------------------
http://akela.mendelu.cz/~thala
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: Getting the filename which is being typeset
2020-12-01 14:25 ` Tomas Hala
@ 2020-12-01 15:20 ` Otared Kavian
2020-12-01 16:33 ` Henning Hraban Ramm
0 siblings, 1 reply; 11+ messages in thread
From: Otared Kavian @ 2020-12-01 15:20 UTC (permalink / raw)
To: mailing list for ConTeXt users
Thanks Tomás! Indeed \jobname does the job :-)
Best regards: Otared
> On 1 Dec 2020, at 15:25, Tomas Hala <tomas.hala@mendelu.cz> wrote:
>
> Hi Otared,
>
> try \jobname.
>
> Best wishes,
>
> Tomáš
>
>
> Tue, Dec 01, 2020 ve 02:45:18PM +0100 Otared Kavian napsal(a):
> # Hi everyone,
> #
> # I have to typeset a few files which get each an input file named in a certain way. For instance, a file named « myfile.tex » in which another file named « myfile-buffer.tex » is used as an \input file, as in
> #
> # % content of myfile.tex
> # %%%%%
> # \starttext
> # This is a test.
> #
> # \input myfile-buffer.tex
> # \stoptext
> # %%%%%
> #
> # When typesetting « myfile.tex » I wonder whether it is possible to get the name of the file without its suffix, that is to get « myfile », with a command such as
> # \getNameOfCurrentFile
> # and then be able to replace the above snippet by:
> #
> # % desired content of myfile.tex
> # %%%%%
> # \starttext
> # This is a test.
> #
> # \input \getNameOfCurrentFile-buffer.tex
> # \stoptext
> # %%%%%
> #
> # Best regards and thanks for any hint: Otared K.
> # ___________________________________________________________________________________
> # If your question is of interest to others as well, please add an entry to the Wiki!
> #
> # maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> # webpage : http://www.pragma-ade.nl / http://context.aanhet.net
> # archive : https://bitbucket.org/phg/context-mirror/commits/
> # wiki : http://contextgarden.net
> # ___________________________________________________________________________________
>
> Tomáš Hála
> --------------------------------------------------------------------
> Mendelova univerzita, Provozně ekonomická fakulta, ústav informatiky
> Zemědělská 1, CZ-613 00 Brno, tel. +420 545 13 22 28
> --------------------------------------------------------------------
> http://akela.mendelu.cz/~thala
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://context.aanhet.net
> archive : https://bitbucket.org/phg/context-mirror/commits/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Getting the filename which is being typeset
2020-12-01 15:20 ` Otared Kavian
@ 2020-12-01 16:33 ` Henning Hraban Ramm
2020-12-01 17:10 ` Otared Kavian
0 siblings, 1 reply; 11+ messages in thread
From: Henning Hraban Ramm @ 2020-12-01 16:33 UTC (permalink / raw)
To: mailing list for ConTeXt users
> Am 01.12.2020 um 16:20 schrieb Otared Kavian <otared@gmail.com>:
>
> Thanks Tomás! Indeed \jobname does the job :-)
In case you need the current component file in a project environment: \currentcomponent
Hraban
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Getting the filename which is being typeset
2020-12-01 16:33 ` Henning Hraban Ramm
@ 2020-12-01 17:10 ` Otared Kavian
2020-12-01 17:23 ` Wolfgang Schuster
0 siblings, 1 reply; 11+ messages in thread
From: Otared Kavian @ 2020-12-01 17:10 UTC (permalink / raw)
To: mailing list for ConTeXt users
Thanks Hraban, this might be also useful and I'll keep it somewhere on my mind, but for the project I was asking my question \jobname is enough.
Best regards: Otared
> On 1 Dec 2020, at 17:33, Henning Hraban Ramm <texml@fiee.net> wrote:
>
>
>
>> Am 01.12.2020 um 16:20 schrieb Otared Kavian <otared@gmail.com>:
>>
>> Thanks Tomás! Indeed \jobname does the job :-)
>
> In case you need the current component file in a project environment: \currentcomponent
>
> Hraban
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://context.aanhet.net
> archive : https://bitbucket.org/phg/context-mirror/commits/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Getting the filename which is being typeset
2020-12-01 17:10 ` Otared Kavian
@ 2020-12-01 17:23 ` Wolfgang Schuster
2020-12-01 17:55 ` Otared Kavian
2020-12-04 7:02 ` Axel Kielhorn
0 siblings, 2 replies; 11+ messages in thread
From: Wolfgang Schuster @ 2020-12-01 17:23 UTC (permalink / raw)
To: ntg-context
Otared Kavian schrieb am 01.12.2020 um 18:10:
> Thanks Hraban, this might be also useful and I'll keep it somewhere on my mind, but for the project I was asking my question \jobname is enough.
>
> Best regards: Otared
>> On 1 Dec 2020, at 17:33, Henning Hraban Ramm <texml@fiee.net> wrote:
>>> Am 01.12.2020 um 16:20 schrieb Otared Kavian <otared@gmail.com>:
>>>
>>> Thanks Tomás! Indeed \jobname does the job :-)
>> In case you need the current component file in a project environment: \currentcomponent
In some case \inputfilename is the better choice, e.g. when you process
xml files with a environment file for the style and processing settings.
context --environment=myxmlstyle myfile.xml
The following example shows the output of all commands:
\starttext
\starttabulate [|T|T|]
\NC \type{\jobname} \NC \jobname \NC\NR
\NC \type{\jobfilename} \NC \jobfilename \NC\NR
\NC \type{\jobfilesuffix} \NC \jobfilesuffix \NC\NR
\NC \type{\inputfilename} \NC \inputfilename \NC\NR
\NC \type{\inputfilebarename} \NC \inputfilebarename \NC\NR
\NC \type{\inputfilesuffix} \NC \inputfilesuffix \NC\NR
\NC \type{\outputfilename} \NC \outputfilename \NC\NR
\NC \type{\operatingsystem} \NC \operatingsystem \NC\NR
\stoptabulate
\stoptext
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: Getting the filename which is being typeset
2020-12-01 17:23 ` Wolfgang Schuster
@ 2020-12-01 17:55 ` Otared Kavian
2020-12-01 18:47 ` Hans Hagen
2020-12-04 7:02 ` Axel Kielhorn
1 sibling, 1 reply; 11+ messages in thread
From: Otared Kavian @ 2020-12-01 17:55 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hi Wolfgang,
Thank you for your explanations: I am wondering whether this kind of information could go into the wiki, and if yes what would be an appropriate title for that page (of course I'll do it).
However the two commands
\inputfilesuffix
\jobfilesuffix
put inside the file « myfile.tex » do not give the suffix « tex »: shoul dthey give « tex » or am I misintrepreting these commands?
Best regards: Otared
> On 1 Dec 2020, at 18:23, Wolfgang Schuster <wolfgang.schuster.lists@gmail.com> wrote:
>
> Otared Kavian schrieb am 01.12.2020 um 18:10:
>> Thanks Hraban, this might be also useful and I'll keep it somewhere on my mind, but for the project I was asking my question \jobname is enough.
>>
>> Best regards: Otared
>>> On 1 Dec 2020, at 17:33, Henning Hraban Ramm <texml@fiee.net> wrote:
>>>> Am 01.12.2020 um 16:20 schrieb Otared Kavian <otared@gmail.com>:
>>>>
>>>> Thanks Tomás! Indeed \jobname does the job :-)
>>> In case you need the current component file in a project environment: \currentcomponent
>
> In some case \inputfilename is the better choice, e.g. when you process xml files with a environment file for the style and processing settings.
>
> context --environment=myxmlstyle myfile.xml
>
> The following example shows the output of all commands:
>
> \starttext
> \starttabulate [|T|T|]
> \NC \type{\jobname} \NC \jobname \NC\NR
> \NC \type{\jobfilename} \NC \jobfilename \NC\NR
> \NC \type{\jobfilesuffix} \NC \jobfilesuffix \NC\NR
> \NC \type{\inputfilename} \NC \inputfilename \NC\NR
> \NC \type{\inputfilebarename} \NC \inputfilebarename \NC\NR
> \NC \type{\inputfilesuffix} \NC \inputfilesuffix \NC\NR
> \NC \type{\outputfilename} \NC \outputfilename \NC\NR
> \NC \type{\operatingsystem} \NC \operatingsystem \NC\NR
> \stoptabulate
> \stoptext
>
> Wolfgang
>
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://context.aanhet.net
> archive : https://bitbucket.org/phg/context-mirror/commits/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: Getting the filename which is being typeset
2020-12-01 17:55 ` Otared Kavian
@ 2020-12-01 18:47 ` Hans Hagen
0 siblings, 0 replies; 11+ messages in thread
From: Hans Hagen @ 2020-12-01 18:47 UTC (permalink / raw)
To: mailing list for ConTeXt users, Otared Kavian
On 12/1/2020 6:55 PM, Otared Kavian wrote:
> Hi Wolfgang,
>
> Thank you for your explanations: I am wondering whether this kind of information could go into the wiki, and if yes what would be an appropriate title for that page (of course I'll do it).
>
> However the two commands
>
> \inputfilesuffix
> \jobfilesuffix
>
> put inside the file « myfile.tex » do not give the suffix « tex »: shoul dthey give « tex » or am I misintrepreting these commands?
tex is the default suffix in engines
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 11+ messages in thread
* Re: Getting the filename which is being typeset
2020-12-01 17:23 ` Wolfgang Schuster
2020-12-01 17:55 ` Otared Kavian
@ 2020-12-04 7:02 ` Axel Kielhorn
2020-12-04 9:04 ` Hans Hagen
1 sibling, 1 reply; 11+ messages in thread
From: Axel Kielhorn @ 2020-12-04 7:02 UTC (permalink / raw)
To: mailing list for ConTeXt users
> Am 01.12.2020 um 18:23 schrieb Wolfgang Schuster <wolfgang.schuster.lists@gmail.com>:
>
> The following example shows the output of all commands:
>
> \starttext
> \starttabulate [|T|T|]
> \NC \type{\jobname} \NC \jobname \NC\NR
> \NC \type{\jobfilename} \NC \jobfilename \NC\NR
> \NC \type{\jobfilesuffix} \NC \jobfilesuffix \NC\NR
> \NC \type{\inputfilename} \NC \inputfilename \NC\NR
> \NC \type{\inputfilebarename} \NC \inputfilebarename \NC\NR
> \NC \type{\inputfilesuffix} \NC \inputfilesuffix \NC\NR
> \NC \type{\outputfilename} \NC \outputfilename \NC\NR
> \NC \type{\operatingsystem} \NC \operatingsystem \NC\NR
> \stoptabulate
> \stoptext
On MacOS 10.13 the result of \operatingsystem is „osx-ppc“.
That was a surprise:-)
Greetings
Axel
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: Getting the filename which is being typeset
2020-12-04 7:02 ` Axel Kielhorn
@ 2020-12-04 9:04 ` Hans Hagen
2020-12-05 8:38 ` Axel Kielhorn
0 siblings, 1 reply; 11+ messages in thread
From: Hans Hagen @ 2020-12-04 9:04 UTC (permalink / raw)
To: mailing list for ConTeXt users, Axel Kielhorn
On 12/4/2020 8:02 AM, Axel Kielhorn wrote:
>
>> Am 01.12.2020 um 18:23 schrieb Wolfgang Schuster <wolfgang.schuster.lists@gmail.com>:
>>
>> The following example shows the output of all commands:
>>
>> \starttext
>> \starttabulate [|T|T|]
>> \NC \type{\jobname} \NC \jobname \NC\NR
>> \NC \type{\jobfilename} \NC \jobfilename \NC\NR
>> \NC \type{\jobfilesuffix} \NC \jobfilesuffix \NC\NR
>> \NC \type{\inputfilename} \NC \inputfilename \NC\NR
>> \NC \type{\inputfilebarename} \NC \inputfilebarename \NC\NR
>> \NC \type{\inputfilesuffix} \NC \inputfilesuffix \NC\NR
>> \NC \type{\outputfilename} \NC \outputfilename \NC\NR
>> \NC \type{\operatingsystem} \NC \operatingsystem \NC\NR
>> \stoptabulate
>> \stoptext
>
> On MacOS 10.13 the result of \operatingsystem is „osx-ppc“.
> That was a surprise:-)
maybe apples are no longer apples
because we cannot check for some env variable directly (at least we
could not reliable when the code was written) a slower echo is used to
check $HOSTTYPE and if we don't recognize something there we end up with
a ppc because that was what osx started with
now, in practice this is not that important because most systems don't
distinguish between 32/64 or some mix wrt paths (i might actually remove
a lot of that stuff because in luamatetex we're more normalized across
platforms)
the apple guesser is tricky because at least in the past there was no
reliable way to figure it out, for instance uname didn't work well and
we had this curious mix of 64 bit machines that osx refused to see as
such (i remember that I had to root something in the old macbook to make
it being seen as 64 bit instead of 32 in order to be able to update)
what does your "echo $HOSTTYPE" mention?
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: Getting the filename which is being typeset
2020-12-04 9:04 ` Hans Hagen
@ 2020-12-05 8:38 ` Axel Kielhorn
0 siblings, 0 replies; 11+ messages in thread
From: Axel Kielhorn @ 2020-12-05 8:38 UTC (permalink / raw)
To: mailing list for ConTeXt users
> Am 04.12.2020 um 10:04 schrieb Hans Hagen <j.hagen@xs4all.nl>:
>
> On 12/4/2020 8:02 AM, Axel Kielhorn wrote:
>>> Am 01.12.2020 um 18:23 schrieb Wolfgang Schuster <wolfgang.schuster.lists@gmail.com>:
>>>
>>> The following example shows the output of all commands:
>>>
>>> \starttext
>>> \starttabulate [|T|T|]
>>> \NC \type{\jobname} \NC \jobname \NC\NR
>>> \NC \type{\jobfilename} \NC \jobfilename \NC\NR
>>> \NC \type{\jobfilesuffix} \NC \jobfilesuffix \NC\NR
>>> \NC \type{\inputfilename} \NC \inputfilename \NC\NR
>>> \NC \type{\inputfilebarename} \NC \inputfilebarename \NC\NR
>>> \NC \type{\inputfilesuffix} \NC \inputfilesuffix \NC\NR
>>> \NC \type{\outputfilename} \NC \outputfilename \NC\NR
>>> \NC \type{\operatingsystem} \NC \operatingsystem \NC\NR
>>> \stoptabulate
>>> \stoptext
>> On MacOS 10.13 the result of \operatingsystem is „osx-ppc“.
>> That was a surprise:-)
> maybe apples are no longer apples
They lost the Power when they became Intelligent, and now they get ARMed.
> because we cannot check for some env variable directly (at least we could not reliable when the code was written) a slower echo is used to check $HOSTTYPE and if we don't recognize something there we end up with a ppc because that was what osx started with
>
> now, in practice this is not that important because most systems don't distinguish between 32/64 or some mix wrt paths (i might actually remove a lot of that stuff because in luamatetex we're more normalized across platforms)
>
> the apple guesser is tricky because at least in the past there was no reliable way to figure it out, for instance uname didn't work well and we had this curious mix of 64 bit machines that osx refused to see as such (i remember that I had to root something in the old macbook to make it being seen as 64 bit instead of 32 in order to be able to update)
>
> what does your "echo $HOSTTYPE" mention?
Melora:~ axel$ echo $HOSTTYPE
x86_64
Melora:~ axel$ uname -a
Darwin 17.7.0 Darwin Kernel Version 17.7.0: Fri Oct 30 13:34:27 PDT 2020; root:xnu-4570.71.82.8~1/RELEASE_X86_64 x86_64
This computer thinks it is Intel based.
Greetings
Axel
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 11+ messages in thread
end of thread, other threads:[~2020-12-05 8:38 UTC | newest]
Thread overview: 11+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2020-12-01 13:45 Getting the filename which is being typeset Otared Kavian
2020-12-01 14:25 ` Tomas Hala
2020-12-01 15:20 ` Otared Kavian
2020-12-01 16:33 ` Henning Hraban Ramm
2020-12-01 17:10 ` Otared Kavian
2020-12-01 17:23 ` Wolfgang Schuster
2020-12-01 17:55 ` Otared Kavian
2020-12-01 18:47 ` Hans Hagen
2020-12-04 7:02 ` Axel Kielhorn
2020-12-04 9:04 ` Hans Hagen
2020-12-05 8:38 ` Axel Kielhorn
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).