* ConTeXt with XeTeX (beginner question)
@ 2008-03-04 16:45 Adam Baker
2008-03-04 17:07 ` Thomas A. Schmitz
2008-03-04 17:09 ` Mojca Miklavec
0 siblings, 2 replies; 5+ messages in thread
From: Adam Baker @ 2008-03-04 16:45 UTC (permalink / raw)
To: ntg-context
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain; charset=GB2312, Size: 4253 bytes --]
Hello,
I am using MikTeX 2.7 with XeTeX 0.997 and ConTeXt version
2008.01.28 21:28. Working off of this wiki page,
http://wiki.contextgarden.net/XeTeX
I am trying to load system fonts in a ConTeXt document. When I run the
file (below), I get an error (further below). One thing I suspect may
be part of the problem is cont-en.fmt. In the MikTeX bin directory, I
run
texexec --make --xtx en
This creates cont-en.fmt in the bin directory, but I don't know that
that's where ConTeXt expects it to be. Searching the rest of the
MikTeX directory structure, I can't find another file with that name.
Any help appreciated,
Adam Baker
====begin file====
\enableregime[utf]
% not necessary since it is default regime, but can remind you that
you must provide UTF-8¨Ccoded text
\definetypeface[myface][ss][Xsans][Arial]
% or any else font in your /windows/fonts folder; run "fc-list
>namelist.txt" to get them all
\setupbodyfont[myface, 12pt]
\starttext
Hello World!
§±§â§Ú§Ó§Ö§ä!
\stoptext
====end file====
C:\Documents and Settings\Adam Baker\My Documents\Booklet>texmfstart texexec --x
tx test.tex
TeXExec | processing document 'test.tex'
TeXExec | no ctx file found
TeXExec | utf mode forced (bom found)
TeXExec | tex processing method: context
TeXExec | TeX run 1
TeXExec | writing option file test.top
TeXExec | using randomseed 1402
TeXExec | tex engine: xetex
TeXExec | tex format: cont-en
This is XeTeX, Version 3.141592-2.2-0.997 (MiKTeX 2.7)
entering extended mode
(test.tex
ConTeXt ver: 2008.01.28 21:28 MKII fmt: 2008.3.3 int: english/english
language : language en is active
system : cont-new loaded
("C:\Program Files\MiKTeX 2.7\tex\context\base\cont-new.tex"
systems : beware: some patches loaded from cont-new.tex
("C:\Program Files\MiKTeX 2.7\tex\context\base\cont-new.mkii") ("C:\Program File
s\MiKTeX 2.7\tex\context\base\cont-mtx.tex"))
system : cont-old loaded
("C:\Program Files\MiKTeX 2.7\tex\context\base\cont-old.tex"
loading : Context Old Macros
)
system : cont-fil loaded
("C:\Program Files\MiKTeX 2.7\tex\context\base\cont-fil.tex"
loading : Context File Synonyms
)
system : cont-sys.rme loaded
("C:\Program Files\MiKTeX 2.7\tex\context\user\cont-sys.rme" ("C:\Program Files\
MiKTeX 2.7\tex\context\base\type-tmf.tex") ("C:\Program Files\MiKTeX 2.7\tex\con
text\base\type-siz.tex") ("C:\Program Files\MiKTeX 2.7\tex\context\base\type-otf
.tex")
("C:\Program Files\MiKTeX 2.7\tex\context\base\type-xtx.tex"))
bodyfont : 12pt rm is loaded
Running makemf...
makemf: The [lmromanslant10-regular]:+liga;+kern;mapping=tlig;+trep; source file
could not be found.
Running hbf2gf...
hbf2gf (CJK ver. 4.7.0)
Couldn't find `[lmromanslant10-regular]:+liga;+kern;mapping=tlig;+tre.cfg'
maketfm: No creation rule for font [lmromanslant10-regular]:+liga;+kern;mapping=
tlig;+trep;.
Running makemf...
makemf: The lmromanslant10-regular:+liga;+kern;mapping=tlig;+trep; source file c
ould not be found.
Running hbf2gf...
hbf2gf (CJK ver. 4.7.0)
Couldn't find `lmromanslant10-regular:+liga;+kern;mapping=tlig;+tre.cfg'
maketfm: No creation rule for font lmromanslant10-regular:+liga;+kern;mapping=tl
ig;+trep;.
Running makemf...
makemf: The lmromanslant10-regular source file could not be found.
Running hbf2gf...
hbf2gf (CJK ver. 4.7.0)
Couldn't find `lmromanslant10-regul.cfg'
maketfm: No creation rule for font lmromanslant10-regular.
! Font \*7ptrmslrm*:=lmromanslant10-regular at 7.0pt not loadable: Metric (TFM)
file or installed font not found.
<to be read again>
\relax
\xxdododefinefont ...tspec {#4}\newfontidentifier
\let \localrelativefontsiz...
\dodosettextfamilyA ...amily \fontsize \endcsname
\else \ifcsname \fontbody ...
\dosettextfamily ...ttextfamily \scriptscriptfont
\let \fontbody \scriptface...
<inserted text> ...y \c!bf \dosettextfamily \c!sl
\dosettextfamily \c!it \do...
\synchronizetext ...athfonts \the \textstrategies
\fi
...
l.1
\enableregime[utf]
?
[-- Attachment #2: Type: text/plain, Size: 487 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: ConTeXt with XeTeX (beginner question)
2008-03-04 16:45 ConTeXt with XeTeX (beginner question) Adam Baker
@ 2008-03-04 17:07 ` Thomas A. Schmitz
2008-03-04 18:26 ` Mojca Miklavec
2008-03-04 17:09 ` Mojca Miklavec
1 sibling, 1 reply; 5+ messages in thread
From: Thomas A. Schmitz @ 2008-03-04 17:07 UTC (permalink / raw)
To: tabaker, mailing list for ConTeXt users
Have a look at this thread:
http://archive.contextgarden.net/message/20080119.170549.5a52968f.en.html
This may be the same problem.
Thomas
On Mar 4, 2008, at 5:45 PM, Adam Baker wrote:
> Hello,
> I am using MikTeX 2.7 with XeTeX 0.997 and ConTeXt version
> 2008.01.28 21:28. Working off of this wiki page,
>
> http://wiki.contextgarden.net/XeTeX
>
> I am trying to load system fonts in a ConTeXt document. When I run the
> file (below), I get an error (further below). One thing I suspect may
> be part of the problem is cont-en.fmt. In the MikTeX bin directory, I
> run
>
> texexec --make --xtx en
>
> This creates cont-en.fmt in the bin directory, but I don't know that
> that's where ConTeXt expects it to be. Searching the rest of the
> MikTeX directory structure, I can't find another file with that name.
>
> Any help appreciated,
> Adam Baker
>
>
> ====begin file====
> \enableregime[utf]
> % not necessary since it is default regime, but can remind you that
> you must provide UTF-8–coded text
> \definetypeface[myface][ss][Xsans][Arial]
> % or any else font in your /windows/fonts folder; run "fc-list
>> namelist.txt" to get them all
> \setupbodyfont[myface, 12pt]
>
> \starttext
> Hello World!
> Привет!
> \stoptext
> ====end file====
>
> C:\Documents and Settings\Adam Baker\My Documents\Booklet>texmfstart
> texexec --x
> tx test.tex
> TeXExec | processing document 'test.tex'
> TeXExec | no ctx file found
> TeXExec | utf mode forced (bom found)
> TeXExec | tex processing method: context
> TeXExec | TeX run 1
> TeXExec | writing option file test.top
> TeXExec | using randomseed 1402
> TeXExec | tex engine: xetex
> TeXExec | tex format: cont-en
> This is XeTeX, Version 3.141592-2.2-0.997 (MiKTeX 2.7)
> entering extended mode
> (test.tex
>
> ConTeXt ver: 2008.01.28 21:28 MKII fmt: 2008.3.3 int: english/
> english
>
> language : language en is active
> system : cont-new loaded
> ("C:\Program Files\MiKTeX 2.7\tex\context\base\cont-new.tex"
> systems : beware: some patches loaded from cont-new.tex
> ("C:\Program Files\MiKTeX 2.7\tex\context\base\cont-new.mkii") ("C:
> \Program File
> s\MiKTeX 2.7\tex\context\base\cont-mtx.tex"))
> system : cont-old loaded
> ("C:\Program Files\MiKTeX 2.7\tex\context\base\cont-old.tex"
> loading : Context Old Macros
> )
> system : cont-fil loaded
> ("C:\Program Files\MiKTeX 2.7\tex\context\base\cont-fil.tex"
> loading : Context File Synonyms
> )
> system : cont-sys.rme loaded
> ("C:\Program Files\MiKTeX 2.7\tex\context\user\cont-sys.rme" ("C:
> \Program Files\
> MiKTeX 2.7\tex\context\base\type-tmf.tex") ("C:\Program Files\MiKTeX
> 2.7\tex\con
> text\base\type-siz.tex") ("C:\Program Files\MiKTeX 2.7\tex\context
> \base\type-otf
> .tex")
> ("C:\Program Files\MiKTeX 2.7\tex\context\base\type-xtx.tex"))
> bodyfont : 12pt rm is loaded
> Running makemf...
> makemf: The [lmromanslant10-regular]:+liga;+kern;mapping=tlig;+trep;
> source file
> could not be found.
> Running hbf2gf...
>
> hbf2gf (CJK ver. 4.7.0)
>
> Couldn't find `[lmromanslant10-regular]:+liga;+kern;mapping=tlig;
> +tre.cfg'
> maketfm: No creation rule for font [lmromanslant10-regular]:+liga;
> +kern;mapping=
> tlig;+trep;.
> Running makemf...
> makemf: The lmromanslant10-regular:+liga;+kern;mapping=tlig;+trep;
> source file c
> ould not be found.
> Running hbf2gf...
>
> hbf2gf (CJK ver. 4.7.0)
>
> Couldn't find `lmromanslant10-regular:+liga;+kern;mapping=tlig;
> +tre.cfg'
> maketfm: No creation rule for font lmromanslant10-regular:+liga;
> +kern;mapping=tl
> ig;+trep;.
> Running makemf...
> makemf: The lmromanslant10-regular source file could not be found.
> Running hbf2gf...
>
> hbf2gf (CJK ver. 4.7.0)
>
> Couldn't find `lmromanslant10-regul.cfg'
> maketfm: No creation rule for font lmromanslant10-regular.
> ! Font \*7ptrmslrm*:=lmromanslant10-regular at 7.0pt not loadable:
> Metric (TFM)
> file or installed font not found.
> <to be read again>
> \relax
> \xxdododefinefont ...tspec {#4}\newfontidentifier
> \let
> \localrelativefontsiz...
> \dodosettextfamilyA ...amily \fontsize \endcsname
> \else \ifcsname
> \fontbody ...
> \dosettextfamily ...ttextfamily \scriptscriptfont
> \let \fontbody
> \scriptface...
> <inserted text> ...y \c!bf \dosettextfamily \c!sl
> \dosettextfamily \c!
> it \do...
> \synchronizetext ...athfonts \the \textstrategies
> \fi
> ...
> l.1
> \enableregime[utf]
> ?
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an
> entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : https://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: ConTeXt with XeTeX (beginner question)
2008-03-04 16:45 ConTeXt with XeTeX (beginner question) Adam Baker
2008-03-04 17:07 ` Thomas A. Schmitz
@ 2008-03-04 17:09 ` Mojca Miklavec
2008-03-04 19:43 ` Adam Baker
1 sibling, 1 reply; 5+ messages in thread
From: Mojca Miklavec @ 2008-03-04 17:09 UTC (permalink / raw)
To: tabaker, mailing list for ConTeXt users
On Tue, Mar 4, 2008 at 5:45 PM, Adam Baker wrote:
> Hello,
> I am using MikTeX 2.7 with XeTeX 0.997 and ConTeXt version
> 2008.01.28 21:28. Working off of this wiki page,
>
> http://wiki.contextgarden.net/XeTeX
>
> I am trying to load system fonts in a ConTeXt document. When I run the
> file (below), I get an error (further below). One thing I suspect may
> be part of the problem is cont-en.fmt. In the MikTeX bin directory, I
> run
>
> texexec --make --xtx en
You don't need to run that. MikTeX should already generate the format
for you (and it did, otherwise you would not be able to run "texexec
--xtx" at all).
In particular, "texexec --make --xtx en" probably behaves badly on MikTeX since:
- there is no real need for it (you can use miktex's tools to generate format)
- difficult to guess the most appropriate location where the format should go
- Hans doesn't use MikTeX, other users do not care too much, mostly
because of the first reason (there is gui to generate formats)
> This creates cont-en.fmt in the bin directory, but I don't know that
> that's where ConTeXt expects it to be. Searching the rest of the
> MikTeX directory structure, I can't find another file with that name.
It's probably somewhere in "Documents and Settings". Try to look for
kpsewhich cont-en.fmt
> ====begin file====
> \enableregime[utf]
> % not necessary since it is default regime, but can remind you that
> you must provide UTF-8–coded text
> \definetypeface[myface][ss][Xsans][Arial]
> % or any else font in your /windows/fonts folder; run "fc-list
> >namelist.txt" to get them all
> \setupbodyfont[myface, 12pt]
>
> \starttext
> Hello World!
> Привет!
> \stoptext
> ====end file====
You can also test with the simplest
\starttext
abc
\stoptext
file - I guess that it should result in the same problem.
Just to make sure: have you updated the MikTeX packages recently? It
looks like you have "new" ConTeXt and old Latin Modern fonts to me,
but I might be wrong.
Mojca
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: ConTeXt with XeTeX (beginner question)
2008-03-04 17:07 ` Thomas A. Schmitz
@ 2008-03-04 18:26 ` Mojca Miklavec
0 siblings, 0 replies; 5+ messages in thread
From: Mojca Miklavec @ 2008-03-04 18:26 UTC (permalink / raw)
To: mailing list for ConTeXt users; +Cc: tabaker
On Tue, Mar 4, 2008 at 6:07 PM, Thomas A. Schmitz wrote:
> Have a look at this thread:
>
>
> http://archive.contextgarden.net/message/20080119.170549.5a52968f.en.html
>
> This may be the same problem.
True, but in MikTeX that should not happen since both ConTeXt and LM
were supposed to be updated simultaneously. TeX Live has no
auto-update mechanisms and at the time when the problem arised LM has
not even been released yet.
For a MikTeX user, following the suggestions from that old thread is
probably a bad idea.
Mojca
> On Mar 4, 2008, at 5:45 PM, Adam Baker wrote:
>
> > Hello,
> > I am using MikTeX 2.7 with XeTeX 0.997 and ConTeXt version
> > 2008.01.28 21:28. Working off of this wiki page,
> >
> > http://wiki.contextgarden.net/XeTeX
> >
> > I am trying to load system fonts in a ConTeXt document. When I run the
> > file (below), I get an error (further below). One thing I suspect may
> > be part of the problem is cont-en.fmt. In the MikTeX bin directory, I
> > run
> >
> > texexec --make --xtx en
> >
> > This creates cont-en.fmt in the bin directory, but I don't know that
> > that's where ConTeXt expects it to be. Searching the rest of the
> > MikTeX directory structure, I can't find another file with that name.
> >
> > Any help appreciated,
> > Adam Baker
> >
> >
> > ====begin file====
> > \enableregime[utf]
> > % not necessary since it is default regime, but can remind you that
> > you must provide UTF-8–coded text
> > \definetypeface[myface][ss][Xsans][Arial]
> > % or any else font in your /windows/fonts folder; run "fc-list
> >> namelist.txt" to get them all
> > \setupbodyfont[myface, 12pt]
> >
> > \starttext
> > Hello World!
> > Привет!
> > \stoptext
> > ====end file====
> >
> > C:\Documents and Settings\Adam Baker\My Documents\Booklet>texmfstart
> > texexec --x
> > tx test.tex
> > TeXExec | processing document 'test.tex'
> > TeXExec | no ctx file found
> > TeXExec | utf mode forced (bom found)
> > TeXExec | tex processing method: context
> > TeXExec | TeX run 1
> > TeXExec | writing option file test.top
> > TeXExec | using randomseed 1402
> > TeXExec | tex engine: xetex
> > TeXExec | tex format: cont-en
> > This is XeTeX, Version 3.141592-2.2-0.997 (MiKTeX 2.7)
> > entering extended mode
> > (test.tex
> >
> > ConTeXt ver: 2008.01.28 21:28 MKII fmt: 2008.3.3 int: english/
> > english
> >
> > language : language en is active
> > system : cont-new loaded
> > ("C:\Program Files\MiKTeX 2.7\tex\context\base\cont-new.tex"
> > systems : beware: some patches loaded from cont-new.tex
> > ("C:\Program Files\MiKTeX 2.7\tex\context\base\cont-new.mkii") ("C:
> > \Program File
> > s\MiKTeX 2.7\tex\context\base\cont-mtx.tex"))
> > system : cont-old loaded
> > ("C:\Program Files\MiKTeX 2.7\tex\context\base\cont-old.tex"
> > loading : Context Old Macros
> > )
> > system : cont-fil loaded
> > ("C:\Program Files\MiKTeX 2.7\tex\context\base\cont-fil.tex"
> > loading : Context File Synonyms
> > )
> > system : cont-sys.rme loaded
> > ("C:\Program Files\MiKTeX 2.7\tex\context\user\cont-sys.rme" ("C:
> > \Program Files\
> > MiKTeX 2.7\tex\context\base\type-tmf.tex") ("C:\Program Files\MiKTeX
> > 2.7\tex\con
> > text\base\type-siz.tex") ("C:\Program Files\MiKTeX 2.7\tex\context
> > \base\type-otf
> > .tex")
> > ("C:\Program Files\MiKTeX 2.7\tex\context\base\type-xtx.tex"))
> > bodyfont : 12pt rm is loaded
> > Running makemf...
> > makemf: The [lmromanslant10-regular]:+liga;+kern;mapping=tlig;+trep;
> > source file
> > could not be found.
> > Running hbf2gf...
> >
> > hbf2gf (CJK ver. 4.7.0)
> >
> > Couldn't find `[lmromanslant10-regular]:+liga;+kern;mapping=tlig;
> > +tre.cfg'
> > maketfm: No creation rule for font [lmromanslant10-regular]:+liga;
> > +kern;mapping=
> > tlig;+trep;.
> > Running makemf...
> > makemf: The lmromanslant10-regular:+liga;+kern;mapping=tlig;+trep;
> > source file c
> > ould not be found.
> > Running hbf2gf...
> >
> > hbf2gf (CJK ver. 4.7.0)
> >
> > Couldn't find `lmromanslant10-regular:+liga;+kern;mapping=tlig;
> > +tre.cfg'
> > maketfm: No creation rule for font lmromanslant10-regular:+liga;
> > +kern;mapping=tl
> > ig;+trep;.
> > Running makemf...
> > makemf: The lmromanslant10-regular source file could not be found.
> > Running hbf2gf...
> >
> > hbf2gf (CJK ver. 4.7.0)
> >
> > Couldn't find `lmromanslant10-regul.cfg'
> > maketfm: No creation rule for font lmromanslant10-regular.
> > ! Font \*7ptrmslrm*:=lmromanslant10-regular at 7.0pt not loadable:
> > Metric (TFM)
> > file or installed font not found.
> > <to be read again>
> > \relax
> > \xxdododefinefont ...tspec {#4}\newfontidentifier
> > \let
> > \localrelativefontsiz...
> > \dodosettextfamilyA ...amily \fontsize \endcsname
> > \else \ifcsname
> > \fontbody ...
> > \dosettextfamily ...ttextfamily \scriptscriptfont
> > \let \fontbody
> > \scriptface...
> > <inserted text> ...y \c!bf \dosettextfamily \c!sl
> > \dosettextfamily \c!
> > it \do...
> > \synchronizetext ...athfonts \the \textstrategies
> > \fi
> > ...
> > l.1
> > \enableregime[utf]
> > ?
> > ___________________________________________________________________________________
> > If your question is of interest to others as well, please add an
> > entry to the Wiki!
> >
> > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> > archive : https://foundry.supelec.fr/projects/contextrev/
> > wiki : http://contextgarden.net
> > ___________________________________________________________________________________
>
> ___________________________________________________________________________________
> If your question is of interest to others as well, please add an entry to the Wiki!
>
> maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
> archive : https://foundry.supelec.fr/projects/contextrev/
> wiki : http://contextgarden.net
> ___________________________________________________________________________________
>
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: ConTeXt with XeTeX (beginner question)
2008-03-04 17:09 ` Mojca Miklavec
@ 2008-03-04 19:43 ` Adam Baker
0 siblings, 0 replies; 5+ messages in thread
From: Adam Baker @ 2008-03-04 19:43 UTC (permalink / raw)
To: Mojca Miklavec; +Cc: mailing list for ConTeXt users
> Just to make sure: have you updated the MikTeX packages recently? It
> looks like you have "new" ConTeXt and old Latin Modern fonts to me,
> but I might be wrong.
I believe this was the problem. I recently upgraded to MikTeX 2.7, but
I also moved my packages with: mpm [snip] --import-all. I guess that
imported old files. (Ironic step to include in an upgrade, eh?)
I am now able to compile the above example with:
texexec --xtx test
Thanks to everyone for responding.
Adam
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : https://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2008-03-04 19:43 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2008-03-04 16:45 ConTeXt with XeTeX (beginner question) Adam Baker
2008-03-04 17:07 ` Thomas A. Schmitz
2008-03-04 18:26 ` Mojca Miklavec
2008-03-04 17:09 ` Mojca Miklavec
2008-03-04 19:43 ` Adam Baker
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).