* Write to tuc file
@ 2021-02-27 16:58 denis.maier
2021-02-27 17:22 ` Hans Hagen
0 siblings, 1 reply; 12+ messages in thread
From: denis.maier @ 2021-02-27 16:58 UTC (permalink / raw)
To: ntg-context
[-- Attachment #1.1: Type: text/plain, Size: 226 bytes --]
Hi,
I want to split a PDF produced by context automatically at certain points. I was thinking I could add information about the desired breakpoints to the tuc file, but I don't know how you do this. Any hints?
Best,
Denis
[-- Attachment #1.2: Type: text/html, Size: 1940 bytes --]
[-- Attachment #2: Type: text/plain, Size: 493 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Write to tuc file
2021-02-27 16:58 Write to tuc file denis.maier
@ 2021-02-27 17:22 ` Hans Hagen
2021-02-27 17:28 ` denis.maier
0 siblings, 1 reply; 12+ messages in thread
From: Hans Hagen @ 2021-02-27 17:22 UTC (permalink / raw)
To: mailing list for ConTeXt users, denis.maier
On 2/27/2021 5:58 PM, denis.maier@ub.unibe.ch wrote:
> I want to split a PDF produced by context automatically at certain
> points. I was thinking I could add information about the desired
> breakpoints to the tuc file, but I don’t know how you do this. Any hints?
Can you define "split"
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Write to tuc file
2021-02-27 17:22 ` Hans Hagen
@ 2021-02-27 17:28 ` denis.maier
2021-02-27 18:26 ` Hans Hagen
2021-03-05 10:29 ` Hans Hagen
0 siblings, 2 replies; 12+ messages in thread
From: denis.maier @ 2021-02-27 17:28 UTC (permalink / raw)
To: j.hagen, ntg-context
It's a book that will be published in two volumes, continually paginated.
In the end I need two pdf files, but I thought it might be easier to treat them as one volume and just split the files with some external tool afterwards.
I could also treat them as two individual books, but then I'd have to get the last page number of volume 1 in volume 2.
Denis
> -----Ursprüngliche Nachricht-----
> Von: Hans Hagen <j.hagen@xs4all.nl>
> Gesendet: Samstag, 27. Februar 2021 18:23
> An: mailing list for ConTeXt users <ntg-context@ntg.nl>; Maier, Denis
> Christian (UB) <denis.maier@ub.unibe.ch>
> Betreff: Re: [NTG-context] Write to tuc file
>
> On 2/27/2021 5:58 PM, denis.maier@ub.unibe.ch wrote:
>
> > I want to split a PDF produced by context automatically at certain
> > points. I was thinking I could add information about the desired
> > breakpoints to the tuc file, but I don't know how you do this. Any hints?
> Can you define "split"
>
> Hans
>
>
> -----------------------------------------------------------------
> Hans Hagen | PRAGMA ADE
> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
> tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
> -----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Write to tuc file
2021-02-27 17:28 ` denis.maier
@ 2021-02-27 18:26 ` Hans Hagen
2021-02-27 21:25 ` denis.maier
2021-02-28 8:07 ` denis.maier
2021-03-05 10:29 ` Hans Hagen
1 sibling, 2 replies; 12+ messages in thread
From: Hans Hagen @ 2021-02-27 18:26 UTC (permalink / raw)
To: denis.maier, mailing list for ConTeXt users
On 2/27/2021 6:28 PM, denis.maier@ub.unibe.ch wrote:
> It's a book that will be published in two volumes, continually paginated.
> In the end I need two pdf files, but I thought it might be easier to treat them as one volume and just split the files with some external tool afterwards.
>
> I could also treat them as two individual books, but then I'd have to get the last page number of volume 1 in volume 2.
On the console you see the pagenumbers right? What you need is the
realpage. You could actually do something:
\dorecurse{10}{\samplefile{tufte}\page}
\appendetoks
\writestatus{!!!!!}{}
\writestatus{!!!!!}{SPLIT HERE: \the\realpageno}
\writestatus{!!!!!}{}
\to \everystoptext
\dorecurse{10}{\samplefile{tufte}\page}
and then use this number in:
context --extra=select --selection=1:4 oeps.pdf --once --autopdf
context --extra=select --selection=5:9999 oeps.pdf --once --autopdf
(We can actually relate tags to pages so maybe I will make something to
pick that up from the tuc file.)
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Write to tuc file
2021-02-27 18:26 ` Hans Hagen
@ 2021-02-27 21:25 ` denis.maier
2021-02-28 8:07 ` denis.maier
1 sibling, 0 replies; 12+ messages in thread
From: denis.maier @ 2021-02-27 21:25 UTC (permalink / raw)
To: j.hagen, ntg-context
Thanks, that's helpful. So to automate this, I'll just need to get the pagenumbers from the log file. I'll give it a try.
________________________________________
Von: Hans Hagen <j.hagen@xs4all.nl>
Gesendet: Samstag, 27. Februar 2021 19:26:52
An: Maier, Denis Christian (UB); mailing list for ConTeXt users
Betreff: Re: AW: [NTG-context] Write to tuc file
On 2/27/2021 6:28 PM, denis.maier@ub.unibe.ch wrote:
> It's a book that will be published in two volumes, continually paginated.
> In the end I need two pdf files, but I thought it might be easier to treat them as one volume and just split the files with some external tool afterwards.
>
> I could also treat them as two individual books, but then I'd have to get the last page number of volume 1 in volume 2.
On the console you see the pagenumbers right? What you need is the
realpage. You could actually do something:
\dorecurse{10}{\samplefile{tufte}\page}
\appendetoks
\writestatus{!!!!!}{}
\writestatus{!!!!!}{SPLIT HERE: \the\realpageno}
\writestatus{!!!!!}{}
\to \everystoptext
\dorecurse{10}{\samplefile{tufte}\page}
and then use this number in:
context --extra=select --selection=1:4 oeps.pdf --once --autopdf
context --extra=select --selection=5:9999 oeps.pdf --once --autopdf
(We can actually relate tags to pages so maybe I will make something to
pick that up from the tuc file.)
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Write to tuc file
2021-02-27 18:26 ` Hans Hagen
2021-02-27 21:25 ` denis.maier
@ 2021-02-28 8:07 ` denis.maier
1 sibling, 0 replies; 12+ messages in thread
From: denis.maier @ 2021-02-28 8:07 UTC (permalink / raw)
To: j.hagen, ntg-context
Oh, another thing I've learned from your example us that \starttext ...\stoptext can be nested...
________________________________________
Von: Hans Hagen <j.hagen@xs4all.nl>
Gesendet: Samstag, 27. Februar 2021 19:26:52
An: Maier, Denis Christian (UB); mailing list for ConTeXt users
Betreff: Re: AW: [NTG-context] Write to tuc file
On 2/27/2021 6:28 PM, denis.maier@ub.unibe.ch wrote:
> It's a book that will be published in two volumes, continually paginated.
> In the end I need two pdf files, but I thought it might be easier to treat them as one volume and just split the files with some external tool afterwards.
>
> I could also treat them as two individual books, but then I'd have to get the last page number of volume 1 in volume 2.
On the console you see the pagenumbers right? What you need is the
realpage. You could actually do something:
\dorecurse{10}{\samplefile{tufte}\page}
\appendetoks
\writestatus{!!!!!}{}
\writestatus{!!!!!}{SPLIT HERE: \the\realpageno}
\writestatus{!!!!!}{}
\to \everystoptext
\dorecurse{10}{\samplefile{tufte}\page}
and then use this number in:
context --extra=select --selection=1:4 oeps.pdf --once --autopdf
context --extra=select --selection=5:9999 oeps.pdf --once --autopdf
(We can actually relate tags to pages so maybe I will make something to
pick that up from the tuc file.)
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Write to tuc file
2021-02-27 17:28 ` denis.maier
2021-02-27 18:26 ` Hans Hagen
@ 2021-03-05 10:29 ` Hans Hagen
2021-03-05 21:38 ` denis.maier
1 sibling, 1 reply; 12+ messages in thread
From: Hans Hagen @ 2021-03-05 10:29 UTC (permalink / raw)
To: denis.maier, ntg-context
On 2/27/2021 6:28 PM, denis.maier@ub.unibe.ch wrote:
> It's a book that will be published in two volumes, continually paginated.
> In the end I need two pdf files, but I thought it might be easier to treat them as one volume and just split the files with some external tool afterwards.
>
> I could also treat them as two individual books, but then I'd have to get the last page number of volume 1 in volume 2.
In the early days of context (more than 2 decades ago) we had a printer
where we could inject from different trays and that is why we have a
feature in context to mark pages (so that directives for printers could
be inserted). This feature survived / evolved into marked pages.
You can do this (oeps.tex):
\starttext
\chapter[one]{One}
\markpage[first] test \page test \page
\markpage[second] test \page
\chapter[two]{Two}
test \page
\markpage[fourth] test
\page
% \doifelsemarkedpage{second}{YES}{NO}
% \doifelsemarkedpage{fourth}{YES}{NO}
% \page
% \doifelsemarkedpage{second}{YES}{NO}
% \doifelsemarkedpage{fourth}{YES}{NO}
\stoptext
So, I was wondering if we can expose that differently.
>context --pages oeps
mtx-context | page : 0001 first
mtx-context | page : 0003 second
mtx-context | page : 0005 fourth
>context --pages --page=second oeps
mtx-context | page : 0003 second
>context --pages --page=second,fourth oeps
mtx-context | page : 0003 second
mtx-context | page : 0005 fourth
But, as you're talking chapters, a variants (with less overhead) is:
>context --pages --list=one,two oeps
mtx-context | list : 0001 one
mtx-context | list : 0004 two
Which of course assumes that you have a reference for the chapters.
This --pages feature is in the latest upload.
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Write to tuc file
2021-03-05 10:29 ` Hans Hagen
@ 2021-03-05 21:38 ` denis.maier
2021-03-05 22:13 ` Hans Hagen
0 siblings, 1 reply; 12+ messages in thread
From: denis.maier @ 2021-03-05 21:38 UTC (permalink / raw)
To: j.hagen, ntg-context
Thanks for this as well, Hans. Looks promising.
So, this is to select pages or page-ranges for processing?
> -----Ursprüngliche Nachricht-----
> Von: Hans Hagen <j.hagen@xs4all.nl>
> Gesendet: Freitag, 5. März 2021 11:29
> An: Maier, Denis Christian (UB) <denis.maier@ub.unibe.ch>; ntg-
> context@ntg.nl
> Betreff: Re: AW: [NTG-context] Write to tuc file
>
> On 2/27/2021 6:28 PM, denis.maier@ub.unibe.ch wrote:
> > It's a book that will be published in two volumes, continually paginated.
> > In the end I need two pdf files, but I thought it might be easier to treat
> them as one volume and just split the files with some external tool
> afterwards.
> >
> > I could also treat them as two individual books, but then I'd have to get the
> last page number of volume 1 in volume 2.
> In the early days of context (more than 2 decades ago) we had a printer
> where we could inject from different trays and that is why we have a feature
> in context to mark pages (so that directives for printers could be inserted).
> This feature survived / evolved into marked pages.
>
> You can do this (oeps.tex):
>
> \starttext
>
> \chapter[one]{One}
>
> \markpage[first] test \page test \page
> \markpage[second] test \page
>
> \chapter[two]{Two}
>
> test \page
> \markpage[fourth] test
>
> \page
>
> % \doifelsemarkedpage{second}{YES}{NO}
> % \doifelsemarkedpage{fourth}{YES}{NO}
>
> % \page
>
> % \doifelsemarkedpage{second}{YES}{NO}
> % \doifelsemarkedpage{fourth}{YES}{NO}
>
> \stoptext
>
> So, I was wondering if we can expose that differently.
>
> >context --pages oeps
> mtx-context | page : 0001 first
> mtx-context | page : 0003 second
> mtx-context | page : 0005 fourth
>
> >context --pages --page=second oeps
> mtx-context | page : 0003 second
>
> >context --pages --page=second,fourth oeps
> mtx-context | page : 0003 second
> mtx-context | page : 0005 fourth
>
> But, as you're talking chapters, a variants (with less overhead) is:
>
> >context --pages --list=one,two oeps
> mtx-context | list : 0001 one
> mtx-context | list : 0004 two
>
> Which of course assumes that you have a reference for the chapters.
>
> This --pages feature is in the latest upload.
>
> Hans
>
> -----------------------------------------------------------------
> Hans Hagen | PRAGMA ADE
> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
> tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
> -----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Write to tuc file
2021-03-05 21:38 ` denis.maier
@ 2021-03-05 22:13 ` Hans Hagen
2021-03-06 12:56 ` Pablo Rodriguez
0 siblings, 1 reply; 12+ messages in thread
From: Hans Hagen @ 2021-03-05 22:13 UTC (permalink / raw)
To: denis.maier, ntg-context
On 3/5/2021 10:38 PM, denis.maier@ub.unibe.ch wrote:
> Thanks for this as well, Hans. Looks promising.
> So, this is to select pages or page-ranges for processing?
assuming that you have either marked pages or proper refs for chapters
you can use the reported values and feed them into whatever
i could add something to the select style but i guess then there is no
uniformity in how users do this
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Write to tuc file
2021-03-05 22:13 ` Hans Hagen
@ 2021-03-06 12:56 ` Pablo Rodriguez
2021-03-06 13:35 ` Hans Hagen
0 siblings, 1 reply; 12+ messages in thread
From: Pablo Rodriguez @ 2021-03-06 12:56 UTC (permalink / raw)
To: ntg-context
On 3/5/21 11:13 PM, Hans Hagen wrote:
> On 3/5/2021 10:38 PM, denis.maier@ub.unibe.ch wrote:
>> Thanks for this as well, Hans. Looks promising.
>> So, this is to select pages or page-ranges for processing?
> assuming that you have either marked pages or proper refs for chapters
> you can use the reported values and feed them into whatever
>
> i could add something to the select style but i guess then there is no
> uniformity in how users do this
Many thanks for the new stuff, Hans.
This could be an approach:
\starttext
\completecontent
\dorecurse{10}
{\startchapter\markpage[start-\recurselevel]
\dorecurse{\randomnumber{0}{1000}}
{\input knuth\par}
\markpage[stop-\recurselevel]\stopchapter}
\stoptext
"start-" and "stop-" could define page ranges when the same identifier
is used.
The select style could generate from start-identifier and
stop-identifier, the result "identifier.pdf".
I think this is a simple approach.
Many thanks for your help,
Pablo
--
http://www.ousia.tk
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Write to tuc file
2021-03-06 12:56 ` Pablo Rodriguez
@ 2021-03-06 13:35 ` Hans Hagen
2021-03-07 10:04 ` Pablo Rodriguez
0 siblings, 1 reply; 12+ messages in thread
From: Hans Hagen @ 2021-03-06 13:35 UTC (permalink / raw)
To: mailing list for ConTeXt users, Pablo Rodriguez
On 3/6/2021 1:56 PM, Pablo Rodriguez wrote:
> On 3/5/21 11:13 PM, Hans Hagen wrote:
>> On 3/5/2021 10:38 PM, denis.maier@ub.unibe.ch wrote:
>>> Thanks for this as well, Hans. Looks promising.
>>> So, this is to select pages or page-ranges for processing?
>> assuming that you have either marked pages or proper refs for chapters
>> you can use the reported values and feed them into whatever
>>
>> i could add something to the select style but i guess then there is no
>> uniformity in how users do this
>
> Many thanks for the new stuff, Hans.
>
> This could be an approach:
>
> \starttext
> \completecontent
> \dorecurse{10}
> {\startchapter\markpage[start-\recurselevel]
> \dorecurse{\randomnumber{0}{1000}}
> {\input knuth\par}
> \markpage[stop-\recurselevel]\stopchapter}
> \stoptext
>
> "start-" and "stop-" could define page ranges when the same identifier
> is used.
>
> The select style could generate from start-identifier and
> stop-identifier, the result "identifier.pdf".
\startchapter[reference=whatever,title=foo]
\stopchapter
\startchapter[reference=moreover,title=oof]
\stopchapter
and --pages=whatever,moreover will give you the info you need to call
context --extra=copy or whatever with the right arguments
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
* Re: Write to tuc file
2021-03-06 13:35 ` Hans Hagen
@ 2021-03-07 10:04 ` Pablo Rodriguez
0 siblings, 0 replies; 12+ messages in thread
From: Pablo Rodriguez @ 2021-03-07 10:04 UTC (permalink / raw)
To: ntg-context
On 3/6/21 2:35 PM, Hans Hagen wrote:
> On 3/6/2021 1:56 PM, Pablo Rodriguez wrote:
>> [...]
>> The select style could generate from start-identifier and
>> stop-identifier, the result "identifier.pdf".
> \startchapter[reference=whatever,title=foo]
> \stopchapter
> \startchapter[reference=moreover,title=oof]
> \stopchapter
>
> and --pages=whatever,moreover will give you the info you need to call
> context --extra=copy or whatever with the right arguments
Hans,
real-world needs may be complex, such as in the following sample:
\starttext
\completecontent
\dorecurse{3}
{\startpart
\edef\pn{\recurselevel}
\dorecurse{30}
{\startchapter\markpage[start-\pn.\recurselevel]
\dorecurse{\randomnumber{0}{30}}
{\input knuth\par}
\markpage[stop-\pn.\recurselevel]\stopchapter}
\stoppart}
\stoptext
This generates a document to be split in 90 individual documents. I
cannot even think in specifying them manually.
It would be very useful to have something similar to:
context --extra=select --selection=pages oeps --once --autopdf
I hope my explanation is clearer now.
Many thanks for your help,
Pablo
--
http://www.ousia.tk
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 12+ messages in thread
end of thread, other threads:[~2021-03-07 10:04 UTC | newest]
Thread overview: 12+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2021-02-27 16:58 Write to tuc file denis.maier
2021-02-27 17:22 ` Hans Hagen
2021-02-27 17:28 ` denis.maier
2021-02-27 18:26 ` Hans Hagen
2021-02-27 21:25 ` denis.maier
2021-02-28 8:07 ` denis.maier
2021-03-05 10:29 ` Hans Hagen
2021-03-05 21:38 ` denis.maier
2021-03-05 22:13 ` Hans Hagen
2021-03-06 12:56 ` Pablo Rodriguez
2021-03-06 13:35 ` Hans Hagen
2021-03-07 10:04 ` Pablo Rodriguez
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).