* lmtx update/t-vim (again) [not found] <mailman.0.1629453601.23792.ntg-context@ntg.nl> @ 2021-08-22 22:10 ` Benjamin Buchmuller via ntg-context 2021-08-22 22:21 ` Wolfgang Schuster via ntg-context 2021-08-23 6:19 ` Hans Hagen via ntg-context 2021-08-22 22:55 ` lmtx update Benjamin Buchmuller via ntg-context 1 sibling, 2 replies; 9+ messages in thread From: Benjamin Buchmuller via ntg-context @ 2021-08-22 22:10 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Benjamin Buchmuller Hi, Thanks for having had a look into the t-vim. At least the document compiles fine (I get a PDF), although multiple complaints from the lua end when I use "$" or "#" in my source, for example #!/usr/bin/bash etc. culminating in Sorry, but I'm not programmed to handle this case; I'll just pretend that you didn''t ask for it. If you're in the wrong mode, you might be able to return to the right one by typing 'I}' or 'I$' or 'I\par'. Seems as if LMTX tried to interpret something literally here … Further, I get a lot of fonts > beware: no fonts are loaded yet, using 'lm mono' in box fonts > checking > char i (U+00069) in font '' with id 0: missing fonts > checking > char n (U+0006E) in font '' with id 0: missing warnings. Maybe some things need to be adjusted? (Second mail with another error in LMTX follows.) Cheers Benjamin > On Aug 20, 2021, at 12:00, ntg-context-request@ntg.nl wrote: > > Hi, > > Here are the highlights of todays update: > > - somewhat more compact tuc files, not for all documents, but it can accumulate; also less memory used then; i could bring down an extreme 2000 page 5 column doc tuc file down to 5% -- it was 70 MB; for the luametatex manual it reducec the tuc more than 30%; hard to tell if there will be an associated performance hit, but i'm sure thomas will complain if that's the case > > - more mp-tex-lua interfacing upgraded plus extra preliminary chapter for luametafun about extensions - for taco > > - a slightly more compact cache files for fonts with many (pseudo) ligatures; hopefully no side effects (nothing that can't be fixed fast if noted); quite probably no performance hit and maybe even some room for optimization (not done yet) > > - a split in the cache directory for luametatex so that we can more easilly experiment without interference (so, although the above works in mkiv it's not enabled there currently) > > - some minor things (also in the process of splitting the codebase) > > - no real changes in / additions to the luametatex binary (we're in cosmetics mode now) > > Hans > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl > ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: lmtx update/t-vim (again) 2021-08-22 22:10 ` lmtx update/t-vim (again) Benjamin Buchmuller via ntg-context @ 2021-08-22 22:21 ` Wolfgang Schuster via ntg-context 2021-08-23 6:19 ` Hans Hagen via ntg-context 1 sibling, 0 replies; 9+ messages in thread From: Wolfgang Schuster via ntg-context @ 2021-08-22 22:21 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Wolfgang Schuster Benjamin Buchmuller via ntg-context schrieb am 23.08.2021 um 00:10: > Hi, > > Thanks for having had a look into the t-vim. > > At least the document compiles fine (I get a PDF), although multiple complaints from the lua end when I use "$" or "#" in my source, for example > > #!/usr/bin/bash > > etc. culminating in > > Sorry, but I'm not programmed to handle this case; > I'll just pretend that you didn''t ask for it. > If you're in the wrong mode, you might be able to > return to the right one by typing 'I}' or 'I$' or 'I\par'. > > Seems as if LMTX tried to interpret something literally here … > > Further, I get a lot of > > fonts > beware: no fonts are loaded yet, using 'lm mono' in box > fonts > checking > char i (U+00069) in font '' with id 0: missing > fonts > checking > char n (U+0006E) in font '' with id 0: missing > > warnings. Maybe some things need to be adjusted? > > (Second mail with another error in LMTX follows.) Can you provide a minimal working (or in your case not working) example for the problem. Wolfgang ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: lmtx update/t-vim (again) 2021-08-22 22:10 ` lmtx update/t-vim (again) Benjamin Buchmuller via ntg-context 2021-08-22 22:21 ` Wolfgang Schuster via ntg-context @ 2021-08-23 6:19 ` Hans Hagen via ntg-context 2021-08-23 10:32 ` Benjamin Buchmuller via ntg-context 1 sibling, 1 reply; 9+ messages in thread From: Hans Hagen via ntg-context @ 2021-08-23 6:19 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Hans Hagen, Benjamin Buchmuller On 8/23/2021 12:10 AM, Benjamin Buchmuller via ntg-context wrote: > Hi, > > Thanks for having had a look into the t-vim. > > At least the document compiles fine (I get a PDF), although multiple complaints from the lua end when I use "$" or "#" in my source, for example > > #!/usr/bin/bash > > etc. culminating in > > Sorry, but I'm not programmed to handle this case; > I'll just pretend that you didn''t ask for it. > If you're in the wrong mode, you might be able to > return to the right one by typing 'I}' or 'I$' or 'I\par'. > > Seems as if LMTX tried to interpret something literally here … > > Further, I get a lot of > > fonts > beware: no fonts are loaded yet, using 'lm mono' in box > fonts > checking > char i (U+00069) in font '' with id 0: missing > fonts > checking > char n (U+0006E) in font '' with id 0: missing > > warnings. Maybe some things need to be adjusted? THis normally means that you have someting before the \starttext that gets typeset (here the word "in") Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: lmtx update/t-vim (again) 2021-08-23 6:19 ` Hans Hagen via ntg-context @ 2021-08-23 10:32 ` Benjamin Buchmuller via ntg-context 2021-08-23 17:42 ` Aditya Mahajan via ntg-context 0 siblings, 1 reply; 9+ messages in thread From: Benjamin Buchmuller via ntg-context @ 2021-08-23 10:32 UTC (permalink / raw) To: Hans Hagen; +Cc: Benjamin Buchmuller, mailing list for ConTeXt users [-- Attachment #1: Type: text/plain, Size: 1477 bytes --] This is the setup I have been using, but I'm unsure if the problem could be related to the other problem I had. (Not scaled to a MWE, but short enough.) I figured the issue by removing some of the lines. \usemodule[vim] \definetextbackground[codebkg] [ frame=on, framecolor=black, background=, location=paragraph, ] \definevimtyping[vimR] [ syntax=r, space=off, lines=split, numbering=yes, numberstep=5, alternative=pscolor, margin=.5em, style={\switchtobodyfont[type,small]\setupinterlinespace}, before={\blank[white,small]\startcodebkg}, % a bit of extra space after={\stopcodebkg}, directory=vimout/, % note: you must create this folder yourself! ] \starttext \startvimR #!/usr/bin/env R included_aa <- list( `6d1t` = 2:81, `6cnq` = 146:225, `6ccg` = 2:81, `4lg7` = 76:167, `3c2i` = 90:181) %>% enframe() %>% unnest(cols = "value") %>% rename(protein = "name", aa_pos = "value") %>% mutate(chain = "A") %>% mutate(include_aa = TRUE) \stopvimR \stoptext So, the first "i", "n" etc. come from "include_aa" after I remove the shebang statement. The lines with "#" and "$" (in other pieces not shown) cause the complaints. I also realized that I get output for each vim block, but instead of a "vimout", I get a "pdf" (error) and a "log" (some attached) now. Also, the blocks get recompiled with each run even if their content doesn't change which was the previous behavior. [-- Attachment #2: xxx-temp-vimR-0-error.log --] [-- Type: application/octet-stream, Size: 524 bytes --] return { ["errortype"]=0, ["filename"]="vimout/mbd_scaffold-temp-vimR-0.tmp", ["lastcontext"]="\n<line 3.1> #\n !/usr/bin/env R", ["lastluaerror"]="", ["lasttexerror"]="You can't use 'parameter character #' in vertical mode", ["lasttexhelp"]="Sorry, but I'm not programmed to handle this case;\nI'll just pretend that you didn''t ask for it.\nIf you're in the wrong mode, you might be able to\nreturn to the right one by typing 'I}' or 'I$' or 'I\\par'.", ["linenumber"]=1, ["offset"]=10, ["skiplinenumber"]=0, } [-- Attachment #3: xxx-temp-vimR-0.log --] [-- Type: application/octet-stream, Size: 1599 bytes --] system > system > ConTeXt ver: 2021.08.22 11:54 LMTX fmt: 2021.8.22 int: english/english system > system > 'cont-new.mkxl' loaded open source > level 1, order 1, name '/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl' system > beware: some patches loaded from cont-new.mkiv close source > level 1, order 1, name '/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl' system > files > jobname 'vimout/mbd_scaffold-temp-vimR-0', input 'vimout/mbd_scaffold-temp-vimR-0.tmp', result 'vimout/mbd_scaffold-temp-vimR-0' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > level 1, order 2, name 'vimout/mbd_scaffold-temp-vimR-0.tmp' tex error > tex error on line 1 in file vimout/mbd_scaffold-temp-vimR-0.tmp: You can't use 'parameter character #' in vertical mode <line 3.1> # !/usr/bin/env R 1 >> #!/usr/bin/env R 2 library(tidyverse) 3 4 read_csa <- function(file) { 5 6 readr::read_tsv(file) %>% 7 tidyr::pivot_longer(-1) %>% 8 magrittr::set_colnames(c("target", "buried_by", "value")) %>% 9 dplyr::mutate( 10 tar = stringr::str_extract(target, "^.+(?=/.+/)"), 11 tar_chain = stringr::str_extract(target, "(?<=/)[A-Z]+(?=/)"), Sorry, but I'm not programmed to handle this case; I'll just pretend that you didn''t ask for it. If you're in the wrong mode, you might be able to return to the right one by typing 'I}' or 'I$' or 'I\par'. [-- Attachment #4: xxx-temp-vimR-1.log --] [-- Type: application/octet-stream, Size: 13244 bytes --] system > system > ConTeXt ver: 2021.08.22 11:54 LMTX fmt: 2021.8.22 int: english/english system > system > 'cont-new.mkxl' loaded open source > level 1, order 1, name '/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl' system > beware: some patches loaded from cont-new.mkiv close source > level 1, order 1, name '/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl' system > files > jobname 'vimout/mbd_scaffold-temp-vimR-1', input 'vimout/mbd_scaffold-temp-vimR-1.tmp', result 'vimout/mbd_scaffold-temp-vimR-1' fonts > latin modern fonts are not preloaded languages > language 'en' is active open source > level 1, order 2, name 'vimout/mbd_scaffold-temp-vimR-1.tmp' close source > level 1, order 2, name 'vimout/mbd_scaffold-temp-vimR-1.tmp' system > invalid \starttext ... \stoptext structure fonts > beware: no fonts are loaded yet, using 'lm mono' in box fonts > checking > char i (U+00069) in font '' with id 0: missing fonts > checking > char n (U+0006E) in font '' with id 0: missing fonts > checking > char c (U+00063) in font '' with id 0: missing fonts > checking > char l (U+0006C) in font '' with id 0: missing fonts > checking > char u (U+00075) in font '' with id 0: missing fonts > checking > char d (U+00064) in font '' with id 0: missing fonts > checking > char e (U+00065) in font '' with id 0: missing fonts > checking > char _ (U+0005F) in font '' with id 0: missing fonts > checking > char a (U+00061) in font '' with id 0: missing fonts > checking > char < (U+0003C) in font '' with id 0: missing fonts > checking > char - (U+0002D) in font '' with id 0: missing fonts > checking > char s (U+00073) in font '' with id 0: missing fonts > checking > char t (U+00074) in font '' with id 0: missing fonts > checking > char ( (U+00028) in font '' with id 0: missing fonts > checking > char ` (U+00060) in font '' with id 0: missing fonts > checking > char 6 (U+00036) in font '' with id 0: missing fonts > checking > char 1 (U+00031) in font '' with id 0: missing fonts > checking > char = (U+0003D) in font '' with id 0: missing fonts > checking > char 2 (U+00032) in font '' with id 0: missing fonts > checking > char : (U+0003A) in font '' with id 0: missing fonts > checking > char 8 (U+00038) in font '' with id 0: missing fonts > checking > char , (U+0002C) in font '' with id 0: missing fonts > checking > char q (U+00071) in font '' with id 0: missing fonts > checking > char 4 (U+00034) in font '' with id 0: missing fonts > checking > char 5 (U+00035) in font '' with id 0: missing fonts > checking > char g (U+00067) in font '' with id 0: missing fonts > checking > char 7 (U+00037) in font '' with id 0: missing fonts > checking > char 3 (U+00033) in font '' with id 0: missing fonts > checking > char 9 (U+00039) in font '' with id 0: missing fonts > checking > char 0 (U+00030) in font '' with id 0: missing fonts > checking > char ) (U+00029) in font '' with id 0: missing fonts > checking > char r (U+00072) in font '' with id 0: missing fonts > checking > char m (U+0006D) in font '' with id 0: missing fonts > checking > char p (U+00070) in font '' with id 0: missing fonts > checking > char o (U+0006F) in font '' with id 0: missing fonts > checking > char " (U+00022) in font '' with id 0: missing fonts > checking > char v (U+00076) in font '' with id 0: missing fonts > checking > char h (U+00068) in font '' with id 0: missing fonts > checking > char A (U+00041) in font '' with id 0: missing backend > xmp > using file '/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkiv/lpdf-pdx.xml' pages > flushing realpage 1, userpage 1, subpage 1 system > start used files system > text: mbd_scaffold-temp-vimR-1 system > stop used files system > start used files system > 1: filename=publ-imp-default.lua filetype=lua foundname=/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkiv/publ-imp-default.lua fullname=/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkiv/publ-imp-default.lua usedmethod=database system > 2: filename=cont-new.mkxl filetype=tex foundname=/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl fullname=/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl usedmethod=database system > 3: filename=lang-exc.lua filetype=lua foundname=/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkiv/lang-exc.lua fullname=/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkiv/lang-exc.lua usedmethod=database system > 4: filename=lang-us.lua filetype=lua foundname=/Applications/ConTeXt/tex/texmf-context/tex/context/patterns/mkiv/lang-us.lua fullname=/Applications/ConTeXt/tex/texmf-context/tex/context/patterns/mkiv/lang-us.lua usedmethod=database system > 5: filename=vimout/mbd_scaffold-temp-vimR-1.tmp format=tex foundname=vimout/mbd_scaffold-temp-vimR-1.tmp fullname=/Users/benjamin/Documents/university/1712-2103-PhD/thesis-PhD/_sync/02_thesis/publication-thesis_P-v2/maintexts/vimout/mbd_scaffold-temp-vimR-1.tmp usedmethod=direct system > 6: filename=lmmono10-regular filetype=otf format=otf foundname=/Applications/ConTeXt/tex/texmf/fonts/opentype/public/lm/lmmono10-regular.otf fullname=/Applications/ConTeXt/tex/texmf/fonts/opentype/public/lm/lmmono10-regular.otf usedmethod=database system > 7: filename=lpdf-pdx.xml filetype=tex foundname=/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkiv/lpdf-pdx.xml fullname=/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkiv/lpdf-pdx.xml usedmethod=database system > stop used files system > start commandline options system > currentrun="1" system > fulljobname="vimout/mbd_scaffold-temp-vimR-1.tmp" system > input="vimout/mbd_scaffold-temp-vimR-1.tmp" system > kindofrun="1" system > maxnofruns="9" system > texmfbinpath="/Applications/ConTeXt/tex/texmf-osx-64/bin" system > stop commandline options system > start commandline files system > 1: vimout/mbd_scaffold-temp-vimR-1.tmp system > stop commandline files modules > start used modules modules > stop used modules system > system > status after finishing run system > system > ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- system > string pool hash lookup node token buffer input file nest parameter save font language mark insert system > ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- system > max 2097152 100000000 2097152 2097152 50000000 10000000 100000000 100000 2000 10000 100000 500000 100000 10000 10000 500 system > min 150000 10000000 150000 150000 1000000 1000000 1000000 10000 500 1000 20000 100000 250 250 50 10 system > set 500000 10000000 250000 250000 50000000 10000000 10000000 100000 2000 10000 100000 500000 100000 250 250 250 system > stp 100000 1000000 100000 100000 500000 250000 1000000 10000 250 1000 10000 10000 250 250 50 25 system > system > mem 150000 840622 150000 1000000 1000000 1000000 10000 500 1000 20000 10000 46440 96 1200 240 system > all 3600000 840622 2400000 9000000 8000000 1000000 320000 16000 48000 80000 160000 46440 96 28800 5760 system > system > ini 2141682 840331 0 44513 0 489954 0 system > ptr 44554 8606 44537 489941 0 0 0 0 0 0 1 0 0 7 system > top 44555 740037 131074 4574 490748 141 37 4 12 36 406 250 250 50 10 system > ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- system > system > current input type : initial system > system > approximate memory : 27242854 (25 MB) system > system > expansion depth : min: 10000, max: 1000000, set: 10000, top: 7 system > system > luabytecode registers : 997 system > luabytecode bytes : 15968 (0 MB) system > luastate bytes now : 36129040 (34 MB) system > luastate bytes max : 36590329 (34 MB) system > system > file callbacks : 63 system > saved callbacks : 422 system > direct callbacks : 2 system > function callbacks : 187 system > value callbacks : 1 system > message callbacks : 0 system > bytecode callbacks : 597 system > system > mp instances : 0 system > mp estimated memory : 0 (0 MB) system > mp file callbacks : 0 system > mp text callbacks : 0 system > mp script callbacks : 0 system > mp log callbacks : 0 system > system > total callbacks : 1272 system > mp total callbacks : 0 system > backend callbacks : 0 system > mkiv lua stats > used config file: selfautoparent:/texmf/web2c/texmfcnf.lua mkiv lua stats > used cache path: /Applications/ConTeXt/tex/texmf-cache/luametatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e mkiv lua stats > resource resolver: loadtime 0.006 seconds, 0 scans with scantime 0.000 seconds, 0 shared scans, 7 found files, scanned paths: <none> mkiv lua stats > stored bytecode data: 497 modules (0.255 sec), 100 tables (0.012 sec), 597 chunks (0.267 sec) mkiv lua stats > traced context: maxstack: 1591, freed: 0, unreachable: 1591 mkiv lua stats > cleaned up reserved nodes: 69 nodes, 9 lists of 434 mkiv lua stats > node memory usage: 6 attribute, 3 attribute_list, 1 glue, 58 glue_spec, 3 kern, 2 penalty, 2 temp mkiv lua stats > node list callback tasks: 9 unique task lists, 8 instances (re)created, 46 calls mkiv lua stats > used backend: pdf (backend for directly generating pdf output) mkiv lua stats > jobdata time: 0.001 seconds saving, 0.000 seconds loading mkiv lua stats > callbacks: file: 63, saved: 422, direct: 2, function: 187, value: 1, message: 0, bytecode: 597, late 0, total: 1272 (1272 per page) mkiv lua stats > randomizer: resumed with value 0.82560840936925 mkiv lua stats > loaded patterns: en::1, load time: 0.000 mkiv lua stats > loaded fonts: 1 files: lmmono10-regular.otf mkiv lua stats > font engine: otf 3.119, afm 1.513, tfm 1.000, 1 instances, load time 0.010 seconds mkiv lua stats > font embedding time: 0.001 seconds, 1 fonts mkiv lua stats > result saved in file: vimout/mbd_scaffold-temp-vimR-1.pdf, compresslevel 1, objectcompresslevel 3 mkiv lua stats > positions: 4 collected, 0 deltas, 0 shared partials, 0 partial entries mkiv lua stats > used platform: osx-64, type: unix, binary subtree: texmf-osx-64 mkiv lua stats > used engine: luametatex version: 2.0918, functionality level: 20210804, format id: 589, compiler: clang mkiv lua stats > tex properties: 740037 hash slots used of 2097152, 44537 control sequences, approximate memory usage: 25 MB mkiv lua stats > lua properties: engine: lua 5.4, used memory: 36 MB, ctx: 34 MB, max: 34 MB, symbol mask: utf (τεχ) mkiv lua stats > runtime: 0.340 seconds, 1 processed pages, 1 shipped pages, 2.939 pages/second [-- Attachment #5: Type: text/plain, Size: 1473 bytes --] > On Aug 23, 2021, at 08:19, Hans Hagen <j.hagen@xs4all.nl> wrote: > > On 8/23/2021 12:10 AM, Benjamin Buchmuller via ntg-context wrote: >> Hi, >> Thanks for having had a look into the t-vim. >> At least the document compiles fine (I get a PDF), although multiple complaints from the lua end when I use "$" or "#" in my source, for example >> #!/usr/bin/bash >> etc. culminating in >> Sorry, but I'm not programmed to handle this case; >> I'll just pretend that you didn''t ask for it. >> If you're in the wrong mode, you might be able to >> return to the right one by typing 'I}' or 'I$' or 'I\par'. >> Seems as if LMTX tried to interpret something literally here … >> Further, I get a lot of >> fonts > beware: no fonts are loaded yet, using 'lm mono' in box >> fonts > checking > char i (U+00069) in font '' with id 0: missing >> fonts > checking > char n (U+0006E) in font '' with id 0: missing >> warnings. Maybe some things need to be adjusted? > THis normally means that you have someting before the \starttext that gets typeset (here the word "in") > > Hans > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl > ----------------------------------------------------------------- [-- Attachment #6: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: lmtx update/t-vim (again) 2021-08-23 10:32 ` Benjamin Buchmuller via ntg-context @ 2021-08-23 17:42 ` Aditya Mahajan via ntg-context 2021-08-23 17:45 ` Hans Hagen via ntg-context 2021-08-25 2:45 ` Aditya Mahajan via ntg-context 0 siblings, 2 replies; 9+ messages in thread From: Aditya Mahajan via ntg-context @ 2021-08-23 17:42 UTC (permalink / raw) To: Benjamin Buchmuller via ntg-context; +Cc: Aditya Mahajan, Benjamin Buchmuller On Mon, 23 Aug 2021, Benjamin Buchmuller via ntg-context wrote: > This is the setup I have been using, but I'm unsure if the problem could be related to the other problem I had. (Not scaled to a MWE, but short enough.) I figured the issue by removing some of the lines. I get the same error. Most likely due to some grouping issue because there is also this: system > invalid \starttext ... \stoptext structure I'll look into it. Aditya ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: lmtx update/t-vim (again) 2021-08-23 17:42 ` Aditya Mahajan via ntg-context @ 2021-08-23 17:45 ` Hans Hagen via ntg-context 2021-08-25 2:45 ` Aditya Mahajan via ntg-context 1 sibling, 0 replies; 9+ messages in thread From: Hans Hagen via ntg-context @ 2021-08-23 17:45 UTC (permalink / raw) To: Aditya Mahajan, Benjamin Buchmuller via ntg-context Cc: Hans Hagen, Benjamin Buchmuller On 8/23/2021 7:42 PM, Aditya Mahajan wrote: > On Mon, 23 Aug 2021, Benjamin Buchmuller via ntg-context wrote: > >> This is the setup I have been using, but I'm unsure if the problem could be related to the other problem I had. (Not scaled to a MWE, but short enough.) I figured the issue by removing some of the lines. > > I get the same error. Most likely due to some grouping issue because there is also this: > > system > invalid \starttext ... \stoptext structure > > I'll look into it. Hopefully I didn't mess up something. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: lmtx update/t-vim (again) 2021-08-23 17:42 ` Aditya Mahajan via ntg-context 2021-08-23 17:45 ` Hans Hagen via ntg-context @ 2021-08-25 2:45 ` Aditya Mahajan via ntg-context 1 sibling, 0 replies; 9+ messages in thread From: Aditya Mahajan via ntg-context @ 2021-08-25 2:45 UTC (permalink / raw) To: Aditya Mahajan via ntg-context; +Cc: Aditya Mahajan, Benjamin Buchmuller On Mon, 23 Aug 2021, Aditya Mahajan via ntg-context wrote: > On Mon, 23 Aug 2021, Benjamin Buchmuller via ntg-context wrote: > > > This is the setup I have been using, but I'm unsure if the problem could be related to the other problem I had. (Not scaled to a MWE, but short enough.) I figured the issue by removing some of the lines. > > I get the same error. Most likely due to some grouping issue because there is also this: > > system > invalid \starttext ... \stoptext structure > > I'll look into it. The error was due to the change in job.files.run macro. I have adapted the t-filter module to use the new interface. So, the error should go away if you update your installed modules. Thanks for the bug report. Aditya ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 9+ messages in thread
* lmtx update [not found] <mailman.0.1629453601.23792.ntg-context@ntg.nl> 2021-08-22 22:10 ` lmtx update/t-vim (again) Benjamin Buchmuller via ntg-context @ 2021-08-22 22:55 ` Benjamin Buchmuller via ntg-context 2021-08-23 6:21 ` Hans Hagen via ntg-context 1 sibling, 1 reply; 9+ messages in thread From: Benjamin Buchmuller via ntg-context @ 2021-08-22 22:55 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Benjamin Buchmuller Hi, Here is another thing which worked previously for me: ConTeXt ver: 2021.07.30 00:57 LMTX fmt: 2021.8.8 int: english/english Now: ConTeXt ver: 2021.08.22 11:54 LMTX fmt: 2021.8.22 int: english/english Error: lua error: registered function call [396]: ...eXt/tex/texmf-context/tex/context/base/mkxl/anch-pos.lmt:1286: attempt to call a nil value (upvalue 'texgetparstate') stack traceback: ...eXt/tex/texmf-context/tex/context/base/mkxl/anch-pos.lmt:1286: in function <...eXt/tex/texmf-context/tex/context/base/mkxl/anch-pos.lmt:1262> (...tail calls...) 129 \NC \unit{0.88 angstrom} 130 \NC \unit{2.02 angstrom} 131 \NC \unit{2.03 angstrom} 132 \NC \unit{1.90 angstrom} 133 \NC \unit{4.99 angstrom} % rmsd #1/a:14-61 & backbone to #5/a:103-150 & backbone 134 \NC \unit{1.88 angstrom} 135 \NC \unit{5.20 angstrom} % rmsd #1/a:46-55 & backbone to #5/a:135-144 & backbone 136 \NC \NR 137 \HL 138 \stoptabulate The difficulty here is that when I copy the "faulty" part (my table) to another document (including all relevant defs etc.) it just works fine. So, I think it must have to do something with the placement of the float on the page. Any hints what has changed? Thanks! Benjamin > On Aug 20, 2021, at 12:00, ntg-context-request@ntg.nl wrote: > > lmtx update ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 9+ messages in thread
* Re: lmtx update 2021-08-22 22:55 ` lmtx update Benjamin Buchmuller via ntg-context @ 2021-08-23 6:21 ` Hans Hagen via ntg-context 0 siblings, 0 replies; 9+ messages in thread From: Hans Hagen via ntg-context @ 2021-08-23 6:21 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Hans Hagen, Benjamin Buchmuller On 8/23/2021 12:55 AM, Benjamin Buchmuller via ntg-context wrote: > Hi, > > Here is another thing which worked previously for me: > > ConTeXt ver: 2021.07.30 00:57 LMTX fmt: 2021.8.8 int: english/english > > Now: > > ConTeXt ver: 2021.08.22 11:54 LMTX fmt: 2021.8.22 int: english/english > > Error: > > lua error: > > registered function call [396]: ...eXt/tex/texmf-context/tex/context/base/mkxl/anch-pos.lmt:1286: attempt to call a nil value (upvalue 'texgetparstate') > stack traceback: > ...eXt/tex/texmf-context/tex/context/base/mkxl/anch-pos.lmt:1286: in function <...eXt/tex/texmf-context/tex/context/base/mkxl/anch-pos.lmt:1262> > (...tail calls...) > > 129 \NC \unit{0.88 angstrom} > 130 \NC \unit{2.02 angstrom} > 131 \NC \unit{2.03 angstrom} > 132 \NC \unit{1.90 angstrom} > 133 \NC \unit{4.99 angstrom} % rmsd #1/a:14-61 & backbone to #5/a:103-150 & backbone > 134 \NC \unit{1.88 angstrom} > 135 \NC \unit{5.20 angstrom} % rmsd #1/a:46-55 & backbone to #5/a:135-144 & backbone > 136 \NC \NR > 137 \HL > 138 \stoptabulate > > The difficulty here is that when I copy the "faulty" part (my table) to another document (including all relevant defs etc.) it just works fine. So, I think it must have to do something with the placement of the float on the page. > > Any hints what has changed? your luametatex binary seems older than in the lmtx distribution .. what platform? ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 9+ messages in thread
end of thread, other threads:[~2021-08-25 2:45 UTC | newest] Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- [not found] <mailman.0.1629453601.23792.ntg-context@ntg.nl> 2021-08-22 22:10 ` lmtx update/t-vim (again) Benjamin Buchmuller via ntg-context 2021-08-22 22:21 ` Wolfgang Schuster via ntg-context 2021-08-23 6:19 ` Hans Hagen via ntg-context 2021-08-23 10:32 ` Benjamin Buchmuller via ntg-context 2021-08-23 17:42 ` Aditya Mahajan via ntg-context 2021-08-23 17:45 ` Hans Hagen via ntg-context 2021-08-25 2:45 ` Aditya Mahajan via ntg-context 2021-08-22 22:55 ` lmtx update Benjamin Buchmuller via ntg-context 2021-08-23 6:21 ` Hans Hagen via ntg-context
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).