* Bold italic font in Math (\definefallbackfamily) @ 2016-09-10 1:24 Jose Luis Arellano 2016-09-10 5:42 ` Jose Luis Arellano 2016-09-10 5:48 ` Wolfgang Schuster 0 siblings, 2 replies; 33+ messages in thread From: Jose Luis Arellano @ 2016-09-10 1:24 UTC (permalink / raw) To: mailing list for ConTeXt users Hello list, What is correct way to set bold italic font in math? \definefontfamily [Mainface] [rm] [Minion Pro] \definefallbackfamily [Mainface] [mm] [Minion Pro] [preset=math:lowercaseitalic] \definefontfamily [Mainface] [mm] [TeX Gyre Pagella Math] \setupbodyfont[Mainface] \starttext \startformula abc123 \stopformula \stoptext Thanks. ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-10 1:24 Bold italic font in Math (\definefallbackfamily) Jose Luis Arellano @ 2016-09-10 5:42 ` Jose Luis Arellano 2016-09-10 5:48 ` Wolfgang Schuster 1 sibling, 0 replies; 33+ messages in thread From: Jose Luis Arellano @ 2016-09-10 5:42 UTC (permalink / raw) To: mailing list for ConTeXt users Hello again. After some research, i found what (I think is a bug) in \definefallbackfamily. Check the following code: \starttypescript [serif] [Minion] \definebodyfont [default] [rm] [tf=name:minionproregular sa 1, it=name:minionproit sa 1, mb=name:minionpromedium sa 1, mi=name:minionpromediumit sa 1, bf=name:minionprobold sa 1, bi=name:minionproboldit sa 1] \stoptypescript \definefallbackfamily [Minion] [mm] [Minion] [tf=name:minionprobold,preset=math:digitsnormal] \definefallbackfamily [Minion] [mm] [Minion] [tf=name:minionprobold,preset=math:lowercaseitalic] \definetypeface [Minion] [rm] [serif] [Minion] \definefontfamily [Minion] [mm] [TeX Gyre Pagella Math] \setupbodyfont [Minion] \starttext \startformula abcy123 \stopformula \stoptext Log: selectfont > The requested fallback font 'Minion' for typeface 'Minion' style 'mm' was ignored because no files where found. As you can see, \definefallbackfamily works just fine in numbers, but unfortunately fails in lowercaseitalic. This is a bug? Thanks ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-10 1:24 Bold italic font in Math (\definefallbackfamily) Jose Luis Arellano 2016-09-10 5:42 ` Jose Luis Arellano @ 2016-09-10 5:48 ` Wolfgang Schuster 2016-09-10 7:38 ` Jose Luis Arellano 1 sibling, 1 reply; 33+ messages in thread From: Wolfgang Schuster @ 2016-09-10 5:48 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1116 bytes --] > Jose Luis Arellano <mailto:jose.4rellano@gmail.com> > 10. September 2016 um 03:24 > Hello list, > > What is correct way to set bold italic font in math? > > \definefontfamily [Mainface] [rm] [Minion Pro] > \definefallbackfamily [Mainface] [mm] [Minion Pro] > [preset=math:lowercaseitalic] > \definefontfamily [Mainface] [mm] [TeX Gyre Pagella Math] > > \setupbodyfont[Mainface] > > \starttext > \startformula > abc123 > \stopformula > \stoptext \definefontfamily [minionmath] [rm] [Minion Pro] \definefallbackfamily [minionmath] [mm] [Minion Pro] [preset=math:lowercasenormal] \definefallbackfamily [minionmath] [mm] [Minion Pro] [preset=math:lowercaseitalic] \definefallbackfamily [minionmath] [mm] [Minion Pro] [preset=math:lowercasebold] \definefallbackfamily [minionmath] [mm] [Minion Pro] [preset=math:lowercasebolditalic] \definefontfamily [minionmath] [mm] [TeX Gyre Pagella Math] \setupbodyfont[pagella] \starttext \startformula {\tf xyz} xyz {\bf xyz} {\bi xyz} \stopformula \switchtobodyfont[minionmath] \startformula {\tf xyz} xyz {\bf xyz} {\bi xyz} \stopformula \stoptext Wolfgang [-- Attachment #1.2: Type: text/html, Size: 2225 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-10 5:48 ` Wolfgang Schuster @ 2016-09-10 7:38 ` Jose Luis Arellano 2016-09-10 7:54 ` Wolfgang Schuster 0 siblings, 1 reply; 33+ messages in thread From: Jose Luis Arellano @ 2016-09-10 7:38 UTC (permalink / raw) To: mailing list for ConTeXt users Dear Wolfgang. There is way to instruct to (\definefallbackfamily) to use shapes defined in typescript (eg: mi,mb)? \starttypescript [serif] [Minion Pro] \definebodyfont [default] [rm] [tf=name:minionproregular sa 1, it=name:minionproit sa 1, mb=name:minionpromedium sa 1, mi=name:minionpromediumit sa 1, bf=name:minionprobold sa 1, bi=name:minionproboldit sa 1] \stoptypescript ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-10 7:38 ` Jose Luis Arellano @ 2016-09-10 7:54 ` Wolfgang Schuster 2016-09-10 7:56 ` Jose Luis Arellano 0 siblings, 1 reply; 33+ messages in thread From: Wolfgang Schuster @ 2016-09-10 7:54 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 249 bytes --] > Jose Luis Arellano <mailto:jose.4rellano@gmail.com> > 10. September 2016 um 09:38 > Dear Wolfgang. > There is way to instruct to (\definefallbackfamily) to use shapes > defined in typescript (eg: mi,mb)? Is this for normal text or math? Wolfgang [-- Attachment #1.2: Type: text/html, Size: 1266 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-10 7:54 ` Wolfgang Schuster @ 2016-09-10 7:56 ` Jose Luis Arellano 2016-09-10 8:09 ` Wolfgang Schuster 0 siblings, 1 reply; 33+ messages in thread From: Jose Luis Arellano @ 2016-09-10 7:56 UTC (permalink / raw) To: mailing list for ConTeXt users 2016-09-10 4:54 GMT-03:00 Wolfgang Schuster <schuster.wolfgang@gmail.com>: > Is this for normal text or math? > > Wolfgang For Math. ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-10 7:56 ` Jose Luis Arellano @ 2016-09-10 8:09 ` Wolfgang Schuster 2016-09-10 8:31 ` Hans Hagen 2016-09-10 10:57 ` Hans Åberg 0 siblings, 2 replies; 33+ messages in thread From: Wolfgang Schuster @ 2016-09-10 8:09 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 644 bytes --] > Jose Luis Arellano <mailto:jose.4rellano@gmail.com> > 10. September 2016 um 09:56 > > For Math. The \tf and \bf commands in math aren’t font switches like in text. Most math fonts come only with a regular style which provides upright, italic, bold and bolditalic symbols but all of them part of the same font, only a few fonts provide also a bold style (which is usefull in sections) which comes also with upright – and sometimes bold – symbols. \setupbodyfont[xits] \starttext \startformula {\tf xyz} \; xyz \; {\bf xyz} \; {\bi xyz} \quad \mb {\tf xyz} \; xyz \; {\bf xyz} \; {\bi xyz} \stopformula \stoptext Wolfgang [-- Attachment #1.2: Type: text/html, Size: 1713 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-10 8:09 ` Wolfgang Schuster @ 2016-09-10 8:31 ` Hans Hagen 2016-09-10 9:20 ` Jose Luis Arellano 2016-09-10 10:57 ` Hans Åberg 1 sibling, 1 reply; 33+ messages in thread From: Hans Hagen @ 2016-09-10 8:31 UTC (permalink / raw) To: ntg-context On 9/10/2016 10:09 AM, Wolfgang Schuster wrote: >> Jose Luis Arellano <mailto:jose.4rellano@gmail.com> >> 10. September 2016 um 09:56 >> >> For Math. > The \tf and \bf commands in math aren’t font switches like in text. > > Most math fonts come only with a regular style which provides upright, > italic, bold and bolditalic symbols but all of them part of the same > font, only a few fonts provide also a bold style (which is usefull in > sections) which comes also with upright – and sometimes bold – symbols. > > > \setupbodyfont[xits] > > \starttext > > \startformula > {\tf xyz} \; xyz \; {\bf xyz} \; {\bi xyz} \quad > \mb {\tf xyz} \; xyz \; {\bf xyz} \; {\bi xyz} > \stopformula > > \stoptext Depending on if the font project can arrange funding funding for it, the texgyre project will come up with a few bold math fonts (so bold + heavy) and sans math for titling etc. as well as a monospace math font (dejavu based) for editing and documentation. Hans ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-10 8:31 ` Hans Hagen @ 2016-09-10 9:20 ` Jose Luis Arellano 2016-09-10 10:02 ` Wolfgang Schuster 0 siblings, 1 reply; 33+ messages in thread From: Jose Luis Arellano @ 2016-09-10 9:20 UTC (permalink / raw) To: mailing list for ConTeXt users Thanks Wolfgang for explanation, as always very clear. Another related question: If I want to use italic numbers in math, I use: \definefallbackfamily[...][math][...][tf=style:italic,preset=math:digitsnormal] But I lose upright numbers this way. How can I solve this issue. I've tried without success: \definefallbackfamily[...][math][...][preset=math:digitsitalic] Thanks. ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-10 9:20 ` Jose Luis Arellano @ 2016-09-10 10:02 ` Wolfgang Schuster 0 siblings, 0 replies; 33+ messages in thread From: Wolfgang Schuster @ 2016-09-10 10:02 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 662 bytes --] > Jose Luis Arellano <mailto:jose.4rellano@gmail.com> > 10. September 2016 um 11:20 > Thanks Wolfgang for explanation, as always very clear. > > Another related question: > If I want to use italic numbers in math, I use: > \definefallbackfamily[...][math][...][tf=style:italic,preset=math:digitsnormal] > > But I lose upright numbers this way. > > How can I solve this issue. I've tried without success: > \definefallbackfamily[...][math][...][preset=math:digitsitalic] Math symbols in MkIV are (mostly?) restricted to Unicode which doesn’t define italic digits (but you can choose between regular, bold, sans serif, sans serif bold and monospaced). Wolfgang [-- Attachment #1.2: Type: text/html, Size: 1684 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-10 8:09 ` Wolfgang Schuster 2016-09-10 8:31 ` Hans Hagen @ 2016-09-10 10:57 ` Hans Åberg 2016-09-10 14:06 ` Hans Hagen 1 sibling, 1 reply; 33+ messages in thread From: Hans Åberg @ 2016-09-10 10:57 UTC (permalink / raw) To: mailing list for ConTeXt users > On 10 Sep 2016, at 10:09, Wolfgang Schuster <schuster.wolfgang@gmail.com> wrote: > Most math fonts come only with a regular style which provides upright, italic, bold and bolditalic symbols but all of them part of the same font, only a few fonts provide also a bold style (which is usefull in sections) which comes also with upright – and sometimes bold – symbols. > > > \setupbodyfont[xits] > … The STIX fonts, and XITS then, support Unicode math semantic styles. So perhaps the TeX commands should expand to these: \setupbodyfont[xits,10pt] \setupmathematics[lcgreek=normal, default=normal] \starttext \startformula x 𝐱 𝑥 𝒙 𝗑 𝘅 𝘹 𝙭 𝓍 𝔁 𝔵 𝖝 𝚡 𝕩 ξ 𝛏 𝜉 𝝃 𝝽 𝞷 \stopformula \stoptext ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-10 10:57 ` Hans Åberg @ 2016-09-10 14:06 ` Hans Hagen 2016-09-10 14:54 ` Hans Åberg 0 siblings, 1 reply; 33+ messages in thread From: Hans Hagen @ 2016-09-10 14:06 UTC (permalink / raw) To: ntg-context On 9/10/2016 12:57 PM, Hans Åberg wrote: > >> On 10 Sep 2016, at 10:09, Wolfgang Schuster <schuster.wolfgang@gmail.com> wrote: > >> Most math fonts come only with a regular style which provides upright, italic, bold and bolditalic symbols but all of them part of the same font, only a few fonts provide also a bold style (which is usefull in sections) which comes also with upright – and sometimes bold – symbols. >> >> >> \setupbodyfont[xits] >> … > > The STIX fonts, and XITS then, support Unicode math semantic styles. So perhaps the TeX commands should expand to these: what tex commands ... we're talking characters and they don't expand there is a pseudo bold mode but the number of bold symbols is small so it's not that useful > \setupbodyfont[xits,10pt] > > \setupmathematics[lcgreek=normal, default=normal] > > \starttext > > \startformula > x 𝐱 𝑥 𝒙 𝗑 𝘅 𝘹 𝙭 𝓍 𝔁 𝔵 𝖝 𝚡 𝕩 ξ 𝛏 𝜉 𝝃 𝝽 𝞷 > \stopformula > > \stoptext > > > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ___________________________________________________________________________________ > -- ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-10 14:06 ` Hans Hagen @ 2016-09-10 14:54 ` Hans Åberg 2016-09-10 15:13 ` Aditya Mahajan 0 siblings, 1 reply; 33+ messages in thread From: Hans Åberg @ 2016-09-10 14:54 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Hans Hagen > On 10 Sep 2016, at 16:06, Hans Hagen <pragma@wxs.nl> wrote: > > On 9/10/2016 12:57 PM, Hans Åberg wrote: >> The STIX fonts, and XITS then, support Unicode math semantic styles. So perhaps the TeX commands should expand to these: > > what tex commands ... we're talking characters and they don't expand If one writes ASCII ${\bf x} {\bi x}$, it would expand to the expected Unicode $𝐱 𝒙$. ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-10 14:54 ` Hans Åberg @ 2016-09-10 15:13 ` Aditya Mahajan 2016-09-10 15:31 ` Hans Åberg 2016-09-15 16:33 ` Hans Åberg 0 siblings, 2 replies; 33+ messages in thread From: Aditya Mahajan @ 2016-09-10 15:13 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1: Type: TEXT/PLAIN, Size: 500 bytes --] On Sat, 10 Sep 2016, Hans Åberg wrote: >> On 10 Sep 2016, at 16:06, Hans Hagen <pragma@wxs.nl> wrote: >> >> On 9/10/2016 12:57 PM, Hans Åberg wrote: > >>> The STIX fonts, and XITS then, support Unicode math semantic styles. So perhaps the TeX commands should expand to these: >> >> what tex commands ... we're talking characters and they don't expand > > If one writes ASCII ${\bf x} {\bi x}$, it would expand to the expected Unicode $𝐱 𝒙$. That is already the case. Aditya [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-10 15:13 ` Aditya Mahajan @ 2016-09-10 15:31 ` Hans Åberg 2016-09-10 16:19 ` Wolfgang Schuster 2016-09-15 16:33 ` Hans Åberg 1 sibling, 1 reply; 33+ messages in thread From: Hans Åberg @ 2016-09-10 15:31 UTC (permalink / raw) To: mailing list for ConTeXt users > On 10 Sep 2016, at 17:13, Aditya Mahajan <adityam@umich.edu> wrote: > > On Sat, 10 Sep 2016, Hans Åberg wrote: > >>> On 10 Sep 2016, at 16:06, Hans Hagen <pragma@wxs.nl> wrote: >>> On 9/10/2016 12:57 PM, Hans Åberg wrote: >> >>>> The STIX fonts, and XITS then, support Unicode math semantic styles. So perhaps the TeX commands should expand to these: >>> what tex commands ... we're talking characters and they don't expand >> >> If one writes ASCII ${\bf x} {\bi x}$, it would expand to the expected Unicode $𝐱 𝒙$. > > That is already the case. Does it cover those listed here: https://en.wikipedia.org/wiki/Mathematical_Alphanumeric_Symbols ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-10 15:31 ` Hans Åberg @ 2016-09-10 16:19 ` Wolfgang Schuster 2016-09-10 16:47 ` Hans Åberg 0 siblings, 1 reply; 33+ messages in thread From: Wolfgang Schuster @ 2016-09-10 16:19 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 561 bytes --] > Hans Åberg <mailto:haberg-1@telia.com> > 10. September 2016 um 17:31 > > Does it cover those listed here: > https://en.wikipedia.org/wiki/Mathematical_Alphanumeric_Symbols \setupbodyfont[xits,30pt] \starttext \startformula {\mathtf A} {\mathit A} {\mathbf A} {\mathbi A} {\mathss A} {\mathss\mathit A} {\mathss\mathbf A} {\mathss\mathbi A} {\mathtt A} {\mathscript A} {\mathscript\mathbf A} {\mathfraktur A} {\mathfraktur\mathbf A} {\mathblackboard A} \stopformula \stoptext Wolfgang [-- Attachment #1.2: Type: text/html, Size: 1772 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-10 16:19 ` Wolfgang Schuster @ 2016-09-10 16:47 ` Hans Åberg 0 siblings, 0 replies; 33+ messages in thread From: Hans Åberg @ 2016-09-10 16:47 UTC (permalink / raw) To: mailing list for ConTeXt users > On 10 Sep 2016, at 18:19, Wolfgang Schuster <schuster.wolfgang@gmail.com> wrote: > >> Hans Åberg 10. September 2016 um 17:31 >> >> Does it cover those listed here: >> https://en.wikipedia.org/wiki/Mathematical_Alphanumeric_Symbols > \setupbodyfont[xits,30pt] OK. Fine. Adding a comparison with Unicode input, with greek letters as well. It seems that \mathcal expands to \mathscript: On the Unicode list, they mentioned that they plan to add a calligraphic style, parallel with the script style. This is the AMS calligraphic font style that originally was intended as a script style, but people feel it is a sufficiently different style that can be used in combination with the script style. \setupbodyfont[xits,10pt] \setupmathematics[lcgreek=normal, default=normal] \starttext \startformula \startalign \NC {\mathtf A} {\mathbf A} {\mathit A} {\mathbi A} {\mathss A} {\mathss\mathbf A} {\mathss\mathit A} {\mathss\mathbi A} {\mathscript A} {\mathscript\mathbf A} {\mathfraktur A} {\mathfraktur\mathbf A} {\mathtt A} {\mathblackboard A} \,\NC {\mathtf α} {\mathbf α} {\mathit α} {\mathbi α} {\mathss\mathbf α} {\mathss\mathbi α} \NR \NC A 𝐀 𝐴 𝑨 𝖠 𝗔 𝘈 𝘼 𝒜 𝓐 𝔄 𝕬 𝙰 𝔸\,\NC α 𝛂 𝛼 𝜶 𝝰 𝞪\NR \stopalign \stopformula \stoptext ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-10 15:13 ` Aditya Mahajan 2016-09-10 15:31 ` Hans Åberg @ 2016-09-15 16:33 ` Hans Åberg 2016-09-15 16:50 ` Hans Hagen 1 sibling, 1 reply; 33+ messages in thread From: Hans Åberg @ 2016-09-15 16:33 UTC (permalink / raw) To: mailing list for ConTeXt users > On 10 Sep 2016, at 17:13, Aditya Mahajan <adityam@umich.edu> wrote: > > On Sat, 10 Sep 2016, Hans Åberg wrote: > >>> On 10 Sep 2016, at 16:06, Hans Hagen <pragma@wxs.nl> wrote: >>> On 9/10/2016 12:57 PM, Hans Åberg wrote: >> >>>> The STIX fonts, and XITS then, support Unicode math semantic styles. So perhaps the TeX commands should expand to these: >>> what tex commands ... we're talking characters and they don't expand >> >> If one writes ASCII ${\bf x} {\bi x}$, it would expand to the expected Unicode $𝐱 𝒙$. > > That is already the case. FYI, I found a neat trick: If one does not know the Unicode character, because the translation is correct, one can typeset using legacy TeX commands, and copy from the output PDF. It can then be used in the input file, if one so likes. ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-15 16:33 ` Hans Åberg @ 2016-09-15 16:50 ` Hans Hagen 2016-09-15 17:34 ` Hans Åberg 2016-09-15 17:44 ` Hans Åberg 0 siblings, 2 replies; 33+ messages in thread From: Hans Hagen @ 2016-09-15 16:50 UTC (permalink / raw) To: mailing list for ConTeXt users On 9/15/2016 6:33 PM, Hans Åberg wrote: > >> On 10 Sep 2016, at 17:13, Aditya Mahajan <adityam@umich.edu> wrote: >> >> On Sat, 10 Sep 2016, Hans Åberg wrote: >> >>>> On 10 Sep 2016, at 16:06, Hans Hagen <pragma@wxs.nl> wrote: >>>> On 9/10/2016 12:57 PM, Hans Åberg wrote: >>> >>>>> The STIX fonts, and XITS then, support Unicode math semantic styles. So perhaps the TeX commands should expand to these: >>>> what tex commands ... we're talking characters and they don't expand >>> >>> If one writes ASCII ${\bf x} {\bi x}$, it would expand to the expected Unicode $𝐱 𝒙$. >> >> That is already the case. > > FYI, I found a neat trick: > > If one does not know the Unicode character, because the translation is correct, one can typeset using legacy TeX commands, and copy from the output PDF. It can then be used in the input file, if one so likes. or maybe your editor has some selection menu (the scite setup that ships with context provides alphabet / symbol strips) ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-15 16:50 ` Hans Hagen @ 2016-09-15 17:34 ` Hans Åberg 2016-09-15 17:44 ` Hans Åberg 1 sibling, 0 replies; 33+ messages in thread From: Hans Åberg @ 2016-09-15 17:34 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Hans Hagen > On 15 Sep 2016, at 18:50, Hans Hagen <pragma@wxs.nl> wrote: > > On 9/15/2016 6:33 PM, Hans Åberg wrote: >> If one does not know the Unicode character, because the translation is correct, one can typeset using legacy TeX commands, and copy from the output PDF. It can then be used in the input file, if one so likes. > > or maybe your editor has some selection menu Some characters are hard to find in a Unicode symbols table. One example is lower case italic “ℎ”, others are the double-struck letters, which are also out of order. There are more examples, symbols that have lookalike non-math variants. So I made a alphanumeric text file for those. And there is also [1]. But if one has written and compiled some math, it may be quicker to copy from the PDF. 1. http://milde.users.sourceforge.net/LUCR/Math/unimathsymbols.xhtml ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-15 16:50 ` Hans Hagen 2016-09-15 17:34 ` Hans Åberg @ 2016-09-15 17:44 ` Hans Åberg 2016-09-15 18:19 ` Wolfgang Schuster 1 sibling, 1 reply; 33+ messages in thread From: Hans Åberg @ 2016-09-15 17:44 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Hans Hagen > On 15 Sep 2016, at 18:50, Hans Hagen <pragma@wxs.nl> wrote: > > (the scite setup that ships with context provides alphabet / symbol strips) I use Xcode on MacOS (former OS X), which has very good Unicode support (including RTL scripts). There is a Unicode symbols table, but it is slow. One can also design one's own keyboard map, but that is very time consuming. ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-15 17:44 ` Hans Åberg @ 2016-09-15 18:19 ` Wolfgang Schuster 2016-09-15 18:53 ` Hans Åberg ` (3 more replies) 0 siblings, 4 replies; 33+ messages in thread From: Wolfgang Schuster @ 2016-09-15 18:19 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 627 bytes --] > Hans Åberg <mailto:haberg-1@telia.com> > 15. September 2016 um 19:44 > > I use Xcode on MacOS (former OS X), which has very good Unicode > support (including RTL scripts). There is a Unicode symbols table, but > it is slow. One can also design one's own keyboard map, but that is > very time consuming. Another input method is shown in the following video [1] where each symbol get its own command, e.g. \mbfitx is equal to {\bi x}. The source table mentioned in the video can be found on the STIX page [2]. [1] http://zeeba.tv/reconciling-unicode-math-with-latex2e-mathematics/ [2] http://www.ams.org/STIX/ Wolfgang [-- Attachment #1.2: Type: text/html, Size: 1801 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-15 18:19 ` Wolfgang Schuster @ 2016-09-15 18:53 ` Hans Åberg 2016-09-15 19:16 ` Hans Åberg ` (2 subsequent siblings) 3 siblings, 0 replies; 33+ messages in thread From: Hans Åberg @ 2016-09-15 18:53 UTC (permalink / raw) To: mailing list for ConTeXt users > On 15 Sep 2016, at 20:19, Wolfgang Schuster <schuster.wolfgang@gmail.com> wrote: > >>> Hans Åberg 15. September 2016 um 19:44 >>> >>> I use Xcode on MacOS (former OS X), which has very good Unicode support (including RTL scripts). There is a Unicode symbols table, but it is slow. One can also design one's own keyboard map, but that is very time consuming. > Another input method is shown in the following video [1] where each symbol get its own command, e.g. \mbfitx is equal to {\bi x}. The source table mentioned in the video can be found on the STIX page [2]. One can have text translations on MacOS, for example, "…" is translated into “…”, and as an experiment, I have set |-> translated into ↦. (Xcode does not translate, though.) But the GUI is cumbersome and there may be risk for errors, for example in a computer language where -> should be exactly that instead of →. Also, the characters have the advantage that they off-load human memory. :-) ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-15 18:19 ` Wolfgang Schuster 2016-09-15 18:53 ` Hans Åberg @ 2016-09-15 19:16 ` Hans Åberg 2016-09-15 20:06 ` Hans Åberg 2016-09-16 8:25 ` Input methods Hans Åberg 3 siblings, 0 replies; 33+ messages in thread From: Hans Åberg @ 2016-09-15 19:16 UTC (permalink / raw) To: mailing list for ConTeXt users; +Cc: Will Robertson > On 15 Sep 2016, at 20:19, Wolfgang Schuster <schuster.wolfgang@gmail.com> wrote: > >>> Hans Åberg 15. September 2016 um 19:44 >>> >>> I use Xcode on MacOS (former OS X), which has very good Unicode support (including RTL scripts). There is a Unicode symbols table, but it is slow. One can also design one's own keyboard map, but that is very time consuming. > Another input method is shown in the following video [1] where each symbol get its own command, e.g. \mbfitx is equal to {\bi x}. … In fact, I used the PDF copying method on a LaTeX unicode-math file. But the package expands ASCII to math italic, which I pointed out to the author last year, but got no reply. So ConTeXt seems to be more up to date and in line with Unicode. ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-15 18:19 ` Wolfgang Schuster 2016-09-15 18:53 ` Hans Åberg 2016-09-15 19:16 ` Hans Åberg @ 2016-09-15 20:06 ` Hans Åberg 2017-05-12 17:58 ` Jose Luis Arellano 2016-09-16 8:25 ` Input methods Hans Åberg 3 siblings, 1 reply; 33+ messages in thread From: Hans Åberg @ 2016-09-15 20:06 UTC (permalink / raw) To: mailing list for ConTeXt users > On 15 Sep 2016, at 20:19, Wolfgang Schuster <schuster.wolfgang@gmail.com> wrote: > Another input method is shown in the following video [1] where each symbol get its own command, e.g. \mbfitx is equal to {\bi x}. The source table mentioned in the video can be found on the STIX page [2]. > > [1] http://zeeba.tv/reconciling-unicode-math-with-latex2e-mathematics/ > [2] http://www.ams.org/STIX/ The video speaks about a file stix-tbl.txt containing those translation commands, but on [2], the stix-tbl.* table files, not ending with .txt, do not contain those. ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2016-09-15 20:06 ` Hans Åberg @ 2017-05-12 17:58 ` Jose Luis Arellano 2017-05-14 16:47 ` Pablo Rodriguez 0 siblings, 1 reply; 33+ messages in thread From: Jose Luis Arellano @ 2017-05-12 17:58 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 2083 bytes --] Dear list. Please your help I've troubles to use this code from Wolfgang. \definefontfamily [minionmath] [rm] [Minion Pro] \definefallbackfamily [minionmath] [mm] [Minion Pro] [preset=math:lowercasenormal] \definefallbackfamily [minionmath] [mm] [Minion Pro] [preset=math:lowercaseitalic] \definefallbackfamily [minionmath] [mm] [Minion Pro] [preset=math:lowercasebold] \definefallbackfamily [minionmath] [mm] [Minion Pro] [preset=math:lowercasebolditalic] \definefontfamily [minionmath] [mm] [TeX Gyre Pagella Math] \setupbodyfont[pagella] \starttext \startformula {\tf xyz} xyz {\bf xyz} {\bi xyz} \stopformula \switchtobodyfont[minionmath] \startformula {\tf xyz} xyz {\bf xyz} {\bi xyz} \stopformula \stoptext It seems that \definefallbackfamily doesn't works like before. What is the right way to use \it, \bf, etc. in maths? 2016-09-15 17:06 GMT-03:00 Hans Åberg <haberg-1@telia.com>: > > > On 15 Sep 2016, at 20:19, Wolfgang Schuster <schuster.wolfgang@gmail.com> > wrote: > > > Another input method is shown in the following video [1] where each > symbol get its own command, e.g. \mbfitx is equal to {\bi x}. The source > table mentioned in the video can be found on the STIX page [2]. > > > > [1] http://zeeba.tv/reconciling-unicode-math-with-latex2e-mathematics/ > > [2] http://www.ams.org/STIX/ > > The video speaks about a file stix-tbl.txt containing those translation > commands, but on [2], the stix-tbl.* table files, not ending with .txt, do > not contain those. > > > ____________________________________________________________ > _______________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/ > listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : http://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > ____________________________________________________________ > _______________________ > [-- Attachment #1.2: Type: text/html, Size: 3514 bytes --] [-- Attachment #2: Type: text/plain, Size: 492 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Bold italic font in Math (\definefallbackfamily) 2017-05-12 17:58 ` Jose Luis Arellano @ 2017-05-14 16:47 ` Pablo Rodriguez 0 siblings, 0 replies; 33+ messages in thread From: Pablo Rodriguez @ 2017-05-14 16:47 UTC (permalink / raw) To: mailing list for ConTeXt users On 05/12/2017 07:58 PM, Jose Luis Arellano wrote: > Dear list. > Please your help > I've troubles to use this code from Wolfgang. > > \definefontfamily [minionmath] [rm] [Minion Pro] > \definefallbackfamily [minionmath] [mm] [Minion Pro] > [preset=math:lowercasenormal] > \definefallbackfamily [minionmath] [mm] [Minion Pro] > [preset=math:lowercaseitalic] > \definefallbackfamily [minionmath] [mm] [Minion Pro] > [preset=math:lowercasebold] > \definefallbackfamily [minionmath] [mm] [Minion Pro] > [preset=math:lowercasebolditalic] > \definefontfamily [minionmath] [mm] [TeX Gyre Pagella Math] > > \setupbodyfont[pagella] Hi José Luis, I see two issues here: 1. AfaIk, \definefontfamily should be placed always after \definefallbackfamily. 2. \setupbodyfont should be set to [minionmath]. With [pagella] you don’t need to define any font or fallback families. Just in case it helps, Pablo -- http://www.ousia.tk ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Input methods 2016-09-15 18:19 ` Wolfgang Schuster ` (2 preceding siblings ...) 2016-09-15 20:06 ` Hans Åberg @ 2016-09-16 8:25 ` Hans Åberg 2016-09-26 9:00 ` Hans Åberg 3 siblings, 1 reply; 33+ messages in thread From: Hans Åberg @ 2016-09-16 8:25 UTC (permalink / raw) To: mailing list for ConTeXt users > On 15 Sep 2016, at 20:19, Wolfgang Schuster <schuster.wolfgang@gmail.com> wrote: > Another input method is shown in the following video [1] where each symbol get its own command, e.g. \mbfitx is equal to {\bi x}. This works on MacOS 10.12 in any application that uses the standard text services. One has an XML .plist file as listed below. Then in such an application, one turns on "Text Replacements". (The video shows TeXShop.) Using the .plist file below, \mbfitx is translated into 𝒙. The replacement text can be anything. ---- <?xml version="1.0" encoding="UTF-8"?> <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> <plist version="1.0"> <array> <dict> <key>phrase</key> <string>𝒙</string> <key>shortcut</key> <string>\mbfitx</string> </dict> <dict> <key>phrase</key> <string>𝒚</string> <key>shortcut</key> <string>\mbfity</string> </dict> <dict> <key>phrase</key> <string>𝒛</string> <key>shortcut</key> <string>\mbfitz</string> </dict> </array> </plist> ---- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Input methods 2016-09-16 8:25 ` Input methods Hans Åberg @ 2016-09-26 9:00 ` Hans Åberg 2016-09-26 9:25 ` Wolfgang Schuster 0 siblings, 1 reply; 33+ messages in thread From: Hans Åberg @ 2016-09-26 9:00 UTC (permalink / raw) To: ConTeXt users; +Cc: Hans Hagen FYI, I made interactive text substitutions (on MacOS) for the Unicode math letters plus a number of symbols. With it in hand, it is not particularly difficult to use Unicode symbols in the input file. ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Input methods 2016-09-26 9:00 ` Hans Åberg @ 2016-09-26 9:25 ` Wolfgang Schuster 2016-09-26 10:49 ` Hans Åberg ` (2 more replies) 0 siblings, 3 replies; 33+ messages in thread From: Wolfgang Schuster @ 2016-09-26 9:25 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 333 bytes --] > Hans Åberg <mailto:haberg-1@telia.com> > 26. September 2016 um 11:00 > FYI, I made interactive text substitutions (on MacOS) for the Unicode > math letters plus a number of symbols. With it in hand, it is not > particularly difficult to use Unicode symbols in the input file. Can you provide your file(s) for download? Wolfgang [-- Attachment #1.2: Type: text/html, Size: 1314 bytes --] [-- Attachment #2: Type: text/plain, Size: 485 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Input methods 2016-09-26 9:25 ` Wolfgang Schuster @ 2016-09-26 10:49 ` Hans Åberg 2016-09-29 8:34 ` Hans Åberg 2017-03-22 21:25 ` Hans Åberg 2 siblings, 0 replies; 33+ messages in thread From: Hans Åberg @ 2016-09-26 10:49 UTC (permalink / raw) To: mailing list for ConTeXt users > On 26 Sep 2016, at 11:25, Wolfgang Schuster <schuster.wolfgang@gmail.com> wrote: >> Hans Åberg 26. September 2016 um 11:00 >>> FYI, I made interactive text substitutions (on MacOS) for the Unicode math letters plus a number of symbols. With it in hand, it is not particularly difficult to use Unicode symbols in the input file. > Can you provide your file(s) for download? They are at [1] with instructions. Using an escape character as "\" is not necessary, but helps against unwanted replacements. And it is not necessary to use letters only. For the math letters, I have focused on making them short and easy to remember. 1. https://secure2.storegate.com/Shares/Home.aspx?ShareID=f20eb983-f0d9-4440-ab28-c45abeae9ba1 ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Input methods 2016-09-26 9:25 ` Wolfgang Schuster 2016-09-26 10:49 ` Hans Åberg @ 2016-09-29 8:34 ` Hans Åberg 2017-03-22 21:25 ` Hans Åberg 2 siblings, 0 replies; 33+ messages in thread From: Hans Åberg @ 2016-09-29 8:34 UTC (permalink / raw) To: mailing list for ConTeXt users > On 26 Sep 2016, at 11:25, Wolfgang Schuster <schuster.wolfgang@gmail.com> wrote: > > Can you provide your file(s) for download? I have made a new set, at [1], as before: Abbreviations using non-alphanumerical symbols now drop the leading "\", as they seemed to caused strange conflicts. Easier to type, but will have funny consequences in say C++ code. The alphanumerical abbreviations all start with a "\". I have changed the letters for bold, italic and bold italic, so as to not conflict with Greek two-letter abbreviations. In addition, added one letter shorthands for normal italic, as they are so common. Also, some ConTeXt commands added. Not all of these math letters work: the MacOS implementation is buggy. All symbols work, though. I also experimented with a variation where math letter abbreviations used non-alphanumerical symbols, but it turns out they are harder to use, because one needs to learn where they are on the keyboard. So it seems, using letter-only abbreviations is most efficient, except for a few common cases. 1. https://secure2.storegate.com/Shares/Home.aspx?ShareID=f20eb983-f0d9-4440-ab28-c45abeae9ba1 ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
* Re: Input methods 2016-09-26 9:25 ` Wolfgang Schuster 2016-09-26 10:49 ` Hans Åberg 2016-09-29 8:34 ` Hans Åberg @ 2017-03-22 21:25 ` Hans Åberg 2 siblings, 0 replies; 33+ messages in thread From: Hans Åberg @ 2017-03-22 21:25 UTC (permalink / raw) To: Wolfgang Schuster; +Cc: mailing list for ConTeXt users > On 26 Sep 2016, at 11:25, Wolfgang Schuster <schuster.wolfgang@gmail.com> wrote: > > Can you provide your file(s) for download? I made a C++ program "text_to_plist" that computes a text substitution plist from a sequence of input files [1]. It checks for duplicates, does some XML translations, and sorts it, making it fairly easy to try different setups. There is an example, showing how to generate them. 1. https://secure2.storegate.com/Shares/Home.aspx?ShareID=f20eb983-f0d9-4440-ab28-c45abeae9ba1 ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 33+ messages in thread
end of thread, other threads:[~2017-05-14 16:47 UTC | newest] Thread overview: 33+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2016-09-10 1:24 Bold italic font in Math (\definefallbackfamily) Jose Luis Arellano 2016-09-10 5:42 ` Jose Luis Arellano 2016-09-10 5:48 ` Wolfgang Schuster 2016-09-10 7:38 ` Jose Luis Arellano 2016-09-10 7:54 ` Wolfgang Schuster 2016-09-10 7:56 ` Jose Luis Arellano 2016-09-10 8:09 ` Wolfgang Schuster 2016-09-10 8:31 ` Hans Hagen 2016-09-10 9:20 ` Jose Luis Arellano 2016-09-10 10:02 ` Wolfgang Schuster 2016-09-10 10:57 ` Hans Åberg 2016-09-10 14:06 ` Hans Hagen 2016-09-10 14:54 ` Hans Åberg 2016-09-10 15:13 ` Aditya Mahajan 2016-09-10 15:31 ` Hans Åberg 2016-09-10 16:19 ` Wolfgang Schuster 2016-09-10 16:47 ` Hans Åberg 2016-09-15 16:33 ` Hans Åberg 2016-09-15 16:50 ` Hans Hagen 2016-09-15 17:34 ` Hans Åberg 2016-09-15 17:44 ` Hans Åberg 2016-09-15 18:19 ` Wolfgang Schuster 2016-09-15 18:53 ` Hans Åberg 2016-09-15 19:16 ` Hans Åberg 2016-09-15 20:06 ` Hans Åberg 2017-05-12 17:58 ` Jose Luis Arellano 2017-05-14 16:47 ` Pablo Rodriguez 2016-09-16 8:25 ` Input methods Hans Åberg 2016-09-26 9:00 ` Hans Åberg 2016-09-26 9:25 ` Wolfgang Schuster 2016-09-26 10:49 ` Hans Åberg 2016-09-29 8:34 ` Hans Åberg 2017-03-22 21:25 ` Hans Åberg
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).