* two suggestions for \setuphead
@ 2017-03-15 19:59 Pablo Rodriguez
2017-03-22 21:13 ` Hans Hagen
0 siblings, 1 reply; 14+ messages in thread
From: Pablo Rodriguez @ 2017-03-15 19:59 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hans,
here is my minimal sample:
\showframe
\starttext
\setuphead[section][alternative=margin]
\section{This is a title}
\stoptext
After having to adapt a special page design for a friend, I realized
that reverse would be an even greater value for the alternative option
in \setuphead when it could be combined with margin, inmargin and
margintext.
This may be reached with a special command, but avoiding a extra hack
would be very helpful for newbies.
Another issue with margin numbering is alignment:
\showframe
\starttext
\setuphead[section][alternative=margin, align=center]
\section{This is a title}
\stoptext
Would it be possible in this case to set both numberalign and textalign?
(If no margin or inmargin alternative is selected and both numberalign
and textalign are specified, textalign should have preference)
I think those two suggestions would provide extra features for headings.
How about implementing both in ConTeXt?
Many thanks for your help,
Pablo
--
http://www.ousia.tk
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: two suggestions for \setuphead
2017-03-15 19:59 two suggestions for \setuphead Pablo Rodriguez
@ 2017-03-22 21:13 ` Hans Hagen
2017-03-23 19:45 ` Pablo Rodriguez
0 siblings, 1 reply; 14+ messages in thread
From: Hans Hagen @ 2017-03-22 21:13 UTC (permalink / raw)
To: ntg-context
On 3/15/2017 8:59 PM, Pablo Rodriguez wrote:
> Hans,
>
> here is my minimal sample:
>
> \showframe
> \starttext
> \setuphead[section][alternative=margin]
> \section{This is a title}
> \stoptext
>
> After having to adapt a special page design for a friend, I realized
> that reverse would be an even greater value for the alternative option
> in \setuphead when it could be combined with margin, inmargin and
> margintext.
>
> This may be reached with a special command, but avoiding a extra hack
> would be very helpful for newbies.
>
> Another issue with margin numbering is alignment:
>
> \showframe
> \starttext
> \setuphead[section][alternative=margin, align=center]
> \section{This is a title}
> \stoptext
>
> Would it be possible in this case to set both numberalign and textalign?
> (If no margin or inmargin alternative is selected and both numberalign
> and textalign are specified, textalign should have preference)
>
> I think those two suggestions would provide extra features for headings.
>
> How about implementing both in ConTeXt?
i have no clue what you mean
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: two suggestions for \setuphead
2017-03-22 21:13 ` Hans Hagen
@ 2017-03-23 19:45 ` Pablo Rodriguez
2017-03-26 14:11 ` Hans Hagen
0 siblings, 1 reply; 14+ messages in thread
From: Pablo Rodriguez @ 2017-03-23 19:45 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 03/22/2017 10:13 PM, Hans Hagen wrote:
> On 3/15/2017 8:59 PM, Pablo Rodriguez wrote:
>> [...]
>> Would it be possible in this case to set both numberalign and textalign?
>> (If no margin or inmargin alternative is selected and both numberalign
>> and textalign are specified, textalign should have preference)
>>
>> I think those two suggestions would provide extra features for headings.
>>
>> How about implementing both in ConTeXt?
>
> i have no clue what you mean
Sorry for not being clear, Hans. I have two different proposals.
The first one is about aligning titles and numbers (separately):
\showframe
%~ \setuphead[section][alternative=inmargin, align=center]
\setuphead[section][alternative=inmargin]
\setuphead[subsection][alternative=margin]
\setuppagenumbering[alternative=doublesided]
\starttext
\dorecurse{5}{\section{Section title}
\dorecurse{5}{\subsection{Subsection title}}}
\stoptext
Using align, the margin or inmargin alternative doesn’t work. (And align
doesn’t work with the margintext alternative.)
Wouldn’t it be possible to set up both alignments, for numbers in margin
and for title inside margins?
My second proposal is to be able to specify which margin (inner, outer,
left or right) is used for both margin/inmargin and margintext
alternatives in \setuphead.
I mean, either I’m missing something, or the alternatives
margin/inmargin and margintext are set to the left margin. It seems to
be no other option.
Would it be possible to implement both proposals in ConTeXt?
Many thanks for your help,
Pablo
--
http://www.ousia.tk
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: two suggestions for \setuphead
2017-03-23 19:45 ` Pablo Rodriguez
@ 2017-03-26 14:11 ` Hans Hagen
2017-03-26 20:09 ` Pablo Rodriguez
0 siblings, 1 reply; 14+ messages in thread
From: Hans Hagen @ 2017-03-26 14:11 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 3/23/2017 8:45 PM, Pablo Rodriguez wrote:
> On 03/22/2017 10:13 PM, Hans Hagen wrote:
>> On 3/15/2017 8:59 PM, Pablo Rodriguez wrote:
>>> [...]
>>> Would it be possible in this case to set both numberalign and textalign?
>>> (If no margin or inmargin alternative is selected and both numberalign
>>> and textalign are specified, textalign should have preference)
>>>
>>> I think those two suggestions would provide extra features for headings.
>>>
>>> How about implementing both in ConTeXt?
>>
>> i have no clue what you mean
>
> Sorry for not being clear, Hans. I have two different proposals.
>
> The first one is about aligning titles and numbers (separately):
>
> \showframe
> %~ \setuphead[section][alternative=inmargin, align=center]
> \setuphead[section][alternative=inmargin]
> \setuphead[subsection][alternative=margin]
> \setuppagenumbering[alternative=doublesided]
> \starttext
> \dorecurse{5}{\section{Section title}
> \dorecurse{5}{\subsection{Subsection title}}}
> \stoptext
>
> Using align, the margin or inmargin alternative doesn’t work. (And align
> doesn’t work with the margintext alternative.)
>
> Wouldn’t it be possible to set up both alignments, for numbers in margin
> and for title inside margins?
>
> My second proposal is to be able to specify which margin (inner, outer,
> left or right) is used for both margin/inmargin and margintext
> alternatives in \setuphead.
>
> I mean, either I’m missing something, or the alternatives
> margin/inmargin and margintext are set to the left margin. It seems to
> be no other option.
>
> Would it be possible to implement both proposals in ConTeXt?
i'll add this (should cover both)
\showframe
\definemargindata[outerhead][outer]
\setuppagenumbering
[alternative=doublesided]
\setuphead
[section]
[alternative=inmargin,
align=center,
location=outerhead]
\setuphead
[subsection]
[alternative=inmargin,
align=center,
location=inner]
\starttext
\dorecurse {5} {
\section{Section title}
\dorecurse{5} {
\subsection{Subsection title}
}
}
\stoptext
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: two suggestions for \setuphead
2017-03-26 14:11 ` Hans Hagen
@ 2017-03-26 20:09 ` Pablo Rodriguez
2017-03-26 20:20 ` Wolfgang Schuster
0 siblings, 1 reply; 14+ messages in thread
From: Pablo Rodriguez @ 2017-03-26 20:09 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 03/26/2017 04:11 PM, Hans Hagen wrote:
> On 3/23/2017 8:45 PM, Pablo Rodriguez wrote:
>> [...]
>> Would it be possible to implement both proposals in ConTeXt?
>
> i'll add this (should cover both)
Many thanks for the implementation, Hans.
I’m afraid that I found an issue. Alignment in margindata doesn’t work:
\showframe
\definemargindata[outerhead][outer]
\setupmargindata[outerhead][align=center]
\setuppagenumbering
[alternative=doublesided]
\setuphead
[section]
[alternative=inmargin,
align=center,
location=outerhead]
\starttext
\dorecurse{5}{\section{Section title}}
\stoptext
Many thanks for your help,
Pablo
--
http://www.ousia.tk
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: two suggestions for \setuphead
2017-03-26 20:09 ` Pablo Rodriguez
@ 2017-03-26 20:20 ` Wolfgang Schuster
2017-03-26 20:41 ` Pablo Rodriguez
2017-03-27 13:57 ` Pablo Rodriguez
0 siblings, 2 replies; 14+ messages in thread
From: Wolfgang Schuster @ 2017-03-26 20:20 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1.1: Type: text/plain, Size: 468 bytes --]
> Pablo Rodriguez <mailto:oinos@gmx.es>
> 26. März 2017 um 22:09via Postbox
> <https://www.postbox-inc.com/?utm_source=email&utm_medium=sumlink&utm_campaign=reach>
>
> Many thanks for the implementation, Hans.
>
> I’m afraid that I found an issue. Alignment in margindata doesn’t work:
>
> \showframe
>
> \definemargindata[outerhead][outer]
> \setupmargindata[outerhead][align=center]
\setupmargindata[outerhead][align=center,width=\rightmarginwidth]
Wolfgang
[-- Attachment #1.2: Type: text/html, Size: 1649 bytes --]
[-- Attachment #2: Type: text/plain, Size: 492 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: two suggestions for \setuphead
2017-03-26 20:20 ` Wolfgang Schuster
@ 2017-03-26 20:41 ` Pablo Rodriguez
2017-03-27 13:57 ` Pablo Rodriguez
1 sibling, 0 replies; 14+ messages in thread
From: Pablo Rodriguez @ 2017-03-26 20:41 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 03/26/2017 10:20 PM, Wolfgang Schuster wrote:
>> Pablo Rodriguez schrieb am 26. März 2017 um 22:09:
>> [...]
>> \definemargindata[outerhead][outer]
>> \setupmargindata[outerhead][align=center]
>
> \setupmargindata[outerhead][align=center,width=\rightmarginwidth]
Many thanks for your help, Wolfgang.
I didn’t know that width had to be specified.
Pablo
--
http://www.ousia.tk
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: two suggestions for \setuphead
2017-03-26 20:20 ` Wolfgang Schuster
2017-03-26 20:41 ` Pablo Rodriguez
@ 2017-03-27 13:57 ` Pablo Rodriguez
2017-03-27 15:22 ` Hans Hagen
1 sibling, 1 reply; 14+ messages in thread
From: Pablo Rodriguez @ 2017-03-27 13:57 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 03/26/2017 10:20 PM, Wolfgang Schuster wrote:
>> Pablo Rodriguez schrieb am 26. März 2017 um 22:09:
>> [...]
>> I’m afraid that I found an issue. Alignment in margindata doesn’t work:
>>
>> \showframe
>>
>> \definemargindata[outerhead][outer]
>> \setupmargindata[outerhead][align=center]
>
> \setupmargindata[outerhead][align=center,width=\rightmarginwidth]
On a second thought, I wonder why width in \setupmargindata hasn’t its
default value to \leftmarginwidth or \rightmarginwidth depending on the
chosen location value for the same \setupmargindata.
Is there any reason not to have this default value?
Many thanks for your help,
Pablo
--
http://www.ousia.tk
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: two suggestions for \setuphead
2017-03-27 13:57 ` Pablo Rodriguez
@ 2017-03-27 15:22 ` Hans Hagen
2017-03-27 18:00 ` Pablo Rodriguez
0 siblings, 1 reply; 14+ messages in thread
From: Hans Hagen @ 2017-03-27 15:22 UTC (permalink / raw)
To: ntg-context
On 3/27/2017 3:57 PM, Pablo Rodriguez wrote:
> On 03/26/2017 10:20 PM, Wolfgang Schuster wrote:
>>> Pablo Rodriguez schrieb am 26. März 2017 um 22:09:
>>> [...]
>>> I’m afraid that I found an issue. Alignment in margindata doesn’t work:
>>>
>>> \showframe
>>>
>>> \definemargindata[outerhead][outer]
>>> \setupmargindata[outerhead][align=center]
>>
>> \setupmargindata[outerhead][align=center,width=\rightmarginwidth]
>
> On a second thought, I wonder why width in \setupmargindata hasn’t its
> default value to \leftmarginwidth or \rightmarginwidth depending on the
> chosen location value for the same \setupmargindata.
>
> Is there any reason not to have this default value?
it has always been the case and won't change
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: two suggestions for \setuphead
2017-03-27 15:22 ` Hans Hagen
@ 2017-03-27 18:00 ` Pablo Rodriguez
2017-03-27 19:29 ` Hans Hagen
0 siblings, 1 reply; 14+ messages in thread
From: Pablo Rodriguez @ 2017-03-27 18:00 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 03/27/2017 05:22 PM, Hans Hagen wrote:
> On 3/27/2017 3:57 PM, Pablo Rodriguez wrote:
>> [...]
>> On a second thought, I wonder why width in \setupmargindata hasn’t its
>> default value to \leftmarginwidth or \rightmarginwidth depending on the
>> chosen location value for the same \setupmargindata.
>>
>> Is there any reason not to have this default value?
>
> it has always been the case and won't change
Sorry, I was trying to understand why width has no default value in
margin data.
Pablo
--
http://www.ousia.tk
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: two suggestions for \setuphead
2017-03-27 18:00 ` Pablo Rodriguez
@ 2017-03-27 19:29 ` Hans Hagen
2017-03-27 19:49 ` Pablo Rodriguez
0 siblings, 1 reply; 14+ messages in thread
From: Hans Hagen @ 2017-03-27 19:29 UTC (permalink / raw)
To: ntg-context
On 3/27/2017 8:00 PM, Pablo Rodriguez wrote:
> On 03/27/2017 05:22 PM, Hans Hagen wrote:
>> On 3/27/2017 3:57 PM, Pablo Rodriguez wrote:
>>> [...]
>>> On a second thought, I wonder why width in \setupmargindata hasn’t its
>>> default value to \leftmarginwidth or \rightmarginwidth depending on the
>>> chosen location value for the same \setupmargindata.
>>>
>>> Is there any reason not to have this default value?
>>
>> it has always been the case and won't change
>
> Sorry, I was trying to understand why width has no default value in
> margin data.
because there was no need, as it anchors at the side of the text
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: two suggestions for \setuphead
2017-03-27 19:29 ` Hans Hagen
@ 2017-03-27 19:49 ` Pablo Rodriguez
2017-03-27 20:15 ` Hans Hagen
0 siblings, 1 reply; 14+ messages in thread
From: Pablo Rodriguez @ 2017-03-27 19:49 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 03/27/2017 09:29 PM, Hans Hagen wrote:
> On 3/27/2017 8:00 PM, Pablo Rodriguez wrote:
>> Sorry, I was trying to understand why width has no default value in
>> margin data.
>
> because there was no need, as it anchors at the side of the text
Sorry again, but I must be missing something extremely basic.
One of the results of no value for width in margin data is a tricky
approach to its alignment.
But since I seem to be the only one interested in aligning margin data,
I guess this is perfectly fine.
Many thanks for your help,
Pablo
--
http://www.ousia.tk
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 14+ messages in thread
* Re: two suggestions for \setuphead
2017-03-27 19:49 ` Pablo Rodriguez
@ 2017-03-27 20:15 ` Hans Hagen
2017-03-28 17:14 ` Pablo Rodriguez
0 siblings, 1 reply; 14+ messages in thread
From: Hans Hagen @ 2017-03-27 20:15 UTC (permalink / raw)
To: ntg-context
On 3/27/2017 9:49 PM, Pablo Rodriguez wrote:
> On 03/27/2017 09:29 PM, Hans Hagen wrote:
>> On 3/27/2017 8:00 PM, Pablo Rodriguez wrote:
>>> Sorry, I was trying to understand why width has no default value in
>>> margin data.
>>
>> because there was no need, as it anchors at the side of the text
>
> Sorry again, but I must be missing something extremely basic.
>
> One of the results of no value for width in margin data is a tricky
> approach to its alignment.
>
> But since I seem to be the only one interested in aligning margin data,
> I guess this is perfectly fine.
Margindata is a general thing, it can be any margin or edge when you
define an instance so you don't know what width is meant. Of course you
can have a parent with some width. Also, margindata can be stacked next
to another one which again can mean a different width. Having no width
set is better than having the wrong one set.
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 14+ messages in thread* Re: two suggestions for \setuphead
2017-03-27 20:15 ` Hans Hagen
@ 2017-03-28 17:14 ` Pablo Rodriguez
0 siblings, 0 replies; 14+ messages in thread
From: Pablo Rodriguez @ 2017-03-28 17:14 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 03/27/2017 10:15 PM, Hans Hagen wrote:
> On 3/27/2017 9:49 PM, Pablo Rodriguez wrote:
>> [...]
>> One of the results of no value for width in margin data is a tricky
>> approach to its alignment.
>>
>> But since I seem to be the only one interested in aligning margin data,
>> I guess this is perfectly fine.
>
> Margindata is a general thing, it can be any margin or edge when you
> define an instance so you don't know what width is meant. Of course you
> can have a parent with some width. Also, margindata can be stacked next
> to another one which again can mean a different width. Having no width
> set is better than having the wrong one set.
I understand now why width in margin data shouldn’t be set to a default.
Many thanks for the reply,
Pablo
--
http://www.ousia.tk
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 14+ messages in thread
end of thread, other threads:[~2017-03-28 17:14 UTC | newest]
Thread overview: 14+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2017-03-15 19:59 two suggestions for \setuphead Pablo Rodriguez
2017-03-22 21:13 ` Hans Hagen
2017-03-23 19:45 ` Pablo Rodriguez
2017-03-26 14:11 ` Hans Hagen
2017-03-26 20:09 ` Pablo Rodriguez
2017-03-26 20:20 ` Wolfgang Schuster
2017-03-26 20:41 ` Pablo Rodriguez
2017-03-27 13:57 ` Pablo Rodriguez
2017-03-27 15:22 ` Hans Hagen
2017-03-27 18:00 ` Pablo Rodriguez
2017-03-27 19:29 ` Hans Hagen
2017-03-27 19:49 ` Pablo Rodriguez
2017-03-27 20:15 ` Hans Hagen
2017-03-28 17:14 ` Pablo Rodriguez
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).