* Mapping TABLE to xtable (module "ntb-to-xtb") doesn't recognize "c" option for columns
@ 2019-02-19 20:27 Procházka Lukáš Ing.
2019-02-19 20:35 ` Wolfgang Schuster
0 siblings, 1 reply; 6+ messages in thread
From: Procházka Lukáš Ing. @ 2019-02-19 20:27 UTC (permalink / raw)
To: ConTeXt
[-- Attachment #1: Type: text/plain, Size: 1181 bytes --]
Hello,
it seems that xtable setup doesn't recognize the "c" option, which is recognized successfully by TABLE setup;
tested on mapping provided by "ntb-to-xtb" module:
----
\usemodule[ntb-to-xtb] \restoreTABLEfromxtable
\starttext
\bTABLE
\setupTABLE[c][1][width=1in] % Set 1st column width - OK with TABLE
\bTR
\bTD A
\eTD
\eTR
\eTABLE
\bgroup
\mapTABLEtoxtable
\bTABLE
\setupTABLE[c][1][width=1in] % <- This line causes error - not recognized by xtable setup
\bTR
\bTD A
\eTD
\eTR
\eTABLE
\egroup
\stoptext
----
Gives:
"
...
setup > error in line 1, namespace 'xtable', key 'c'
setup > error in line 1, namespace 'xtable', key 'c'
setup > error in line 1, namespace 'xtable', key 'c'
...
"
It might be useful to extend the module to understand "c" setup option as well.
Best regards,
Lukas
--
Ing. Lukáš Procházka | mailto:LPr@pontex.cz
Pontex s. r. o. | mailto:pontex@pontex.cz | http://www.pontex.cz | IDDS: nrpt3sn | IČO: 40763439
Bezová 1658
147 14 Praha 4
Mob.: +420 702 033 396
[-- Attachment #2: Ntb2Xtb.log --]
[-- Type: application/octet-stream, Size: 8827 bytes --]
open source > level 1, order 1, name 'd:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/cont-yes.mkiv'
system >
system > ConTeXt ver: 2019.01.19 12:06 MKIV beta fmt: 2019.1.24 int: english/english
system >
system > 'cont-new.mkiv' loaded
open source > level 2, order 2, name 'd:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/cont-new.mkiv'
system > beware: some patches loaded from cont-new.mkiv
close source > level 2, order 2, name 'd:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/cont-new.mkiv'
system > jobfiles > using path: d:\\Lukas\\ConTeXt\\Styles
system > files > jobname 'Ntb2Xtb', input 'X:\\Users\\LPr\\~\\TZTable\\001_TZ\\Ntb2Xtb.mkiv', result 'Ntb2Xtb'
fonts > latin modern fonts are not preloaded
languages > language 'en' is active
open source > level 2, order 3, name 'X://Users/LPr/~/TZTable/001_TZ/Ntb2Xtb.mkiv'
modules > 'ntb-to-xtb' is loaded
open source > level 3, order 4, name 'd:/Ctx-Beta/tex/texmf-context/tex/context/modules/mkiv/m-ntb-to-xtb.mkiv'
interface > macros > processed mkvi file 'd:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/tabl-xnt.mkvi', delta 28
interface > macros > processed mkvi file 'd:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/tabl-xnt.mkvi', delta 0
open source > level 4, order 5, name 'd:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/tabl-xnt.mkvi'
loading > ConTeXt Table Macros / Natural to Xtreme Tables
close source > level 4, order 5, name 'd:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/tabl-xnt.mkvi'
close source > level 3, order 5, name 'd:/Ctx-Beta/tex/texmf-context/tex/context/modules/mkiv/m-ntb-to-xtb.mkiv'
fonts > preloading latin modern fonts (second stage)
fonts > 'fallback modern-designsize rm 12pt' is loaded
setup > error in line 1, namespace 'xtable', key 'c'
setup > error in line 1, namespace 'xtable', key 'c'
setup > error in line 1, namespace 'xtable', key 'c'
backend > xmp > using file 'd:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/lpdf-pdx.xml'
pages > flushing realpage 1, userpage 1, subpage 1
close source > level 2, order 5, name 'X://Users/LPr/~/TZTable/001_TZ/Ntb2Xtb.mkiv'
close source > level 1, order 5, name 'd:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/cont-yes.mkiv'
system > start used files
system > text: Ntb2Xtb
system > stop used files
system > start used files
system > 1: filename=char-prv.lua filetype=tex format=tex foundname=d:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/char-prv.lua fullname=d:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/char-prv.lua usedmethod=database
system > 2: filename=cont-yes.mkiv filetype=tex foundname=d:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/cont-yes.mkiv fullname=d:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/cont-yes.mkiv usedmethod=database
system > 3: filename=publ-imp-default.lua filetype=scripts foundname=d:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/publ-imp-default.lua fullname=d:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/publ-imp-default.lua usedmethod=database
system > 4: filename=cont-new.mkiv filetype=tex foundname=d:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/cont-new.mkiv fullname=d:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/cont-new.mkiv usedmethod=database
system > 5: filename=lang-exc.lua filetype=scripts foundname=d:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/lang-exc.lua fullname=d:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/lang-exc.lua usedmethod=database
system > 6: filename=lang-us.lua filetype=scripts foundname=d:/Ctx-Beta/tex/texmf-context/tex/context/patterns/mkiv/lang-us.lua fullname=d:/Ctx-Beta/tex/texmf-context/tex/context/patterns/mkiv/lang-us.lua usedmethod=database
system > 7: filename=X://Users/LPr/~/TZTable/001_TZ/Ntb2Xtb.mkiv foundname=X://Users/LPr/~/TZTable/001_TZ/Ntb2Xtb.mkiv fullname=X://Users/LPr/~/TZTable/001_TZ/Ntb2Xtb.mkiv usedmethod=direct
system > 8: filename=m-ntb-to-xtb.mkiv filetype=tex foundname=d:/Ctx-Beta/tex/texmf-context/tex/context/modules/mkiv/m-ntb-to-xtb.mkiv fullname=d:/Ctx-Beta/tex/texmf-context/tex/context/modules/mkiv/m-ntb-to-xtb.mkiv usedmethod=database
system > 9: filename=tabl-xnt.mkvi filetype=tex foundname=d:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/tabl-xnt.mkvi fullname=d:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/tabl-xnt.mkvi usedmethod=database
system > 10: filename=lm.lfg filetype=tex foundname=d:/Ctx-Beta/tex/texmf-context/tex/context/fonts/mkiv/lm.lfg fullname=d:/Ctx-Beta/tex/texmf-context/tex/context/fonts/mkiv/lm.lfg usedmethod=database
system > 11: filename=lmroman12-regular filetype=otf format=otf foundname=d:/Ctx-Beta/tex/texmf/fonts/opentype/public/lm/lmroman12-regular.otf fullname=d:/Ctx-Beta/tex/texmf/fonts/opentype/public/lm/lmroman12-regular.otf usedmethod=database
system > 12: filename=latinmodern-math.otf filetype=opentypefonts foundname=d:/Ctx-Beta/tex/texmf/fonts/opentype/public/lm-math/latinmodern-math.otf fullname=d:/Ctx-Beta/tex/texmf/fonts/opentype/public/lm-math/latinmodern-math.otf usedmethod=database
system > 13: filename=pdftex.map filetype=map format=map foundname=d:/Ctx-Beta/tex/texmf/fonts/map/pdftex/plain/pdftex.map fullname=d:/Ctx-Beta/tex/texmf/fonts/map/pdftex/plain/pdftex.map usedmethod=database
system > 14: filename=lpdf-pdx.xml filetype=tex foundname=d:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/lpdf-pdx.xml fullname=d:/Ctx-Beta/tex/texmf-context/tex/context/base/mkiv/lpdf-pdx.xml usedmethod=database
system > stop used files
system > start commandline options
system > currentrun="1"
system > fulljobname="X:\\Users\\LPr\\~\\TZTable\\001_TZ\\Ntb2Xtb.mkiv"
system > input="X:\\Users\\LPr\\~\\TZTable\\001_TZ\\Ntb2Xtb.mkiv"
system > kindofrun="1"
system > maxnofruns="9"
system > nonstopmode="true"
system > path="d:\\Lukas\\ConTeXt\\Styles"
system > texmfbinpath="d:/Ctx-Beta/tex/texmf-mswin/bin"
system > stop commandline options
system > start commandline files
system > 1: X:\\Users\\LPr\\~\\TZTable\\001_TZ\\Ntb2Xtb.mkiv
system > stop commandline files
modules > start used modules
modules > loaded : *-ntb-to-xtb
modules > stop used modules
mkiv lua stats > used config file: selfautoparent:/texmf/web2c/texmfcnf.lua
mkiv lua stats > used cache path: d:/Ctx-Beta/tex/texmf-cache/luatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e
mkiv lua stats > resource resolver: loadtime 0.016 seconds, 0 scans with scantime 0.000 seconds, 0 shared scans, 14 found files, scanned paths: <none>
mkiv lua stats > stored bytecode data: 444 modules (0.217 sec), 93 tables (0.012 sec), 537 chunks (0.229 sec)
mkiv lua stats > traced context: maxstack: 1369, freed: 0, unreachable: 1369
mkiv lua stats > cleaned up reserved nodes: 58 nodes, 9 lists of 441
mkiv lua stats > node memory usage: 1 glue, 3 kern, 2 penalty, 11 attribute, 50 glue_spec, 4 attribute_list, 2 temp, 2 user_defined
mkiv lua stats > node list callback tasks: 8 unique task lists, 7 instances (re)created, 97 calls
mkiv lua stats > used backend: pdf (backend for directly generating pdf output)
mkiv lua stats > jobdata time: 0.000 seconds saving, 0.016 seconds loading
mkiv lua stats > callbacks: internal: 251, file: 328, direct: 2, late: 0, function 540, total: 1121
mkiv lua stats > randomizer: resumed with value 0.35830688476563
mkiv lua stats > loaded tex modules: 1 requested, all found (*-ntb-to-xtb)
mkiv lua stats > loaded patterns: en::1, load time: 0.000
mkiv lua stats > result saved in file: Ntb2Xtb.pdf, compresslevel 3, objectcompresslevel 3
mkiv lua stats > loaded fonts: 2 files: latinmodern-math.otf, lmroman12-regular.otf
mkiv lua stats > font engine: otf 3.107, afm 1.513, tfm 1.000, 7 instances, 5 shared in backend, 1 common vectors, 4 common hashes, load time 0.158 seconds
mkiv lua stats > used platform: mswin, type: windows, binary subtree: texmf-mswin
mkiv lua stats > used engine: luatex version 1.092 with functionality level 7056, banner: this is luatex, version 1.09.2 (tex live 2018/w32tex)
mkiv lua stats > control sequences: 45274 of 65536 + 100000
mkiv lua stats > lua properties: engine: lua 5.3, used memory: 64 MB (ctx: 63 MB), hash type: lua, hash chars: min(32,40), symbol mask: utf (τεχ)
mkiv lua stats > runtime: 0.491 seconds, 1 processed pages, 1 shipped pages, 2.037 pages/second
[-- Attachment #3: Ntb2Xtb.mkiv --]
[-- Type: application/octet-stream, Size: 366 bytes --]
\usemodule[ntb-to-xtb] \restoreTABLEfromxtable
\starttext
\bTABLE
\setupTABLE[c][1][width=1in]
\bTR
\bTD A
\eTD
\eTR
\eTABLE
\bgroup
\mapTABLEtoxtable
\bTABLE
\setupTABLE[c][1][width=1in] % <- This line causes error
\bTR
\bTD A
\eTD
\eTR
\eTABLE
\egroup
\stoptext
[-- Attachment #4: Ntb2Xtb.pdf --]
[-- Type: application/pdf, Size: 5799 bytes --]
[-- Attachment #5: Type: text/plain, Size: 493 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Mapping TABLE to xtable (module "ntb-to-xtb") doesn't recognize "c" option for columns
2019-02-19 20:27 Mapping TABLE to xtable (module "ntb-to-xtb") doesn't recognize "c" option for columns Procházka Lukáš Ing.
@ 2019-02-19 20:35 ` Wolfgang Schuster
2019-02-20 8:06 ` Procházka Lukáš Ing.
0 siblings, 1 reply; 6+ messages in thread
From: Wolfgang Schuster @ 2019-02-19 20:35 UTC (permalink / raw)
To: mailing list for ConTeXt users, Procházka Lukáš Ing.
Procházka Lukáš Ing. schrieb am 19.02.19 um 21:27:
> Hello,
>
> it seems that xtable setup doesn't recognize the "c" option, which is
> recognized successfully by TABLE setup;
> tested on mapping provided by "ntb-to-xtb" module:
>
> ----
> \usemodule[ntb-to-xtb] \restoreTABLEfromxtable
>
> \starttext
> \bTABLE
> \setupTABLE[c][1][width=1in] % Set 1st column width - OK with TABLE
> \bTR
> \bTD A
> \eTD
> \eTR
> \eTABLE
>
> \bgroup
> \mapTABLEtoxtable
> \bTABLE
> \setupTABLE[c][1][width=1in] % <- This line causes error - not
> recognized by xtable setup
xtables don’t support row/column settings like natural table and the
mapping doesn’t change this.
Wolfgang
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Mapping TABLE to xtable (module "ntb-to-xtb") doesn't recognize "c" option for columns
2019-02-19 20:35 ` Wolfgang Schuster
@ 2019-02-20 8:06 ` Procházka Lukáš Ing.
2019-02-20 8:15 ` Hans Hagen
0 siblings, 1 reply; 6+ messages in thread
From: Procházka Lukáš Ing. @ 2019-02-20 8:06 UTC (permalink / raw)
To: ConTeXt
Hello,
On Tue, 19 Feb 2019 21:35:41 +0100, Wolfgang Schuster <wolfgang.schuster.lists@gmail.com> wrote:
>
>
> Procházka Lukáš Ing. schrieb am 19.02.19 um 21:27:
>> Hello,
>>
>> it seems that xtable setup doesn't recognize the "c" option, which is
>> recognized successfully by TABLE setup;
>> tested on mapping provided by "ntb-to-xtb" module:
>>
>> ----
>> \usemodule[ntb-to-xtb] \restoreTABLEfromxtable
>>
>> \starttext
>> \bTABLE
>> \setupTABLE[c][1][width=1in] % Set 1st column width - OK with TABLE
>> \bTR
>> \bTD A
>> \eTD
>> \eTR
>> \eTABLE
>>
>> \bgroup
>> \mapTABLEtoxtable
>> \bTABLE
>> \setupTABLE[c][1][width=1in] % <- This line causes error - not
>> recognized by xtable setup
>
> xtables don’t support row/column settings like natural table and the
> mapping doesn’t change this.
>
> Wolfgang
as column setup for TABLEs by "\setupTABLE[c][1][width=1in]" is handy and is used frequently, would it be possible to provide identical mechanism for xtables?
From what I read in the manual, setting width of a column for xtable is provided by \startxcell[width=...] at the place of the first cell-in-that-column usage.
Moreover, when xtable is built in two passes, in the first pass it might take a column (width) specification(s), if provided, and keep on reading xcell specification(s), considering xcell width, if provided.
I guess to be handy to implement both \setupTABLE[c][...] and \setupxtable[c][...] in a similar way, especially when there is a simple mechanism which allows TABLE/xtable switching (ntb-to-xtb module).
Best regards,
Lukas
--
Ing. Lukáš Procházka | mailto:LPr@pontex.cz
Pontex s. r. o. | mailto:pontex@pontex.cz | http://www.pontex.cz | IDDS: nrpt3sn | IČO: 40763439
Bezová 1658
147 14 Praha 4
Mob.: +420 702 033 396
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Mapping TABLE to xtable (module "ntb-to-xtb") doesn't recognize "c" option for columns
2019-02-20 8:06 ` Procházka Lukáš Ing.
@ 2019-02-20 8:15 ` Hans Hagen
2019-02-20 9:51 ` Procházka Lukáš Ing.
0 siblings, 1 reply; 6+ messages in thread
From: Hans Hagen @ 2019-02-20 8:15 UTC (permalink / raw)
To: mailing list for ConTeXt users, Procházka Lukáš Ing.
On 2/20/2019 9:06 AM, Procházka Lukáš Ing. wrote:
> Hello,
>
> On Tue, 19 Feb 2019 21:35:41 +0100, Wolfgang Schuster
> <wolfgang.schuster.lists@gmail.com> wrote:
>
>>
>>
>> Procházka Lukáš Ing. schrieb am 19.02.19 um 21:27:
>>> Hello,
>>>
>>> it seems that xtable setup doesn't recognize the "c" option, which is
>>> recognized successfully by TABLE setup;
>>> tested on mapping provided by "ntb-to-xtb" module:
>>>
>>> ----
>>> \usemodule[ntb-to-xtb] \restoreTABLEfromxtable
>>>
>>> \starttext
>>> \bTABLE
>>> \setupTABLE[c][1][width=1in] % Set 1st column width - OK with TABLE
>>> \bTR
>>> \bTD A
>>> \eTD
>>> \eTR
>>> \eTABLE
>>>
>>> \bgroup
>>> \mapTABLEtoxtable
>>> \bTABLE
>>> \setupTABLE[c][1][width=1in] % <- This line causes error - not
>>> recognized by xtable setup
>>
>> xtables don’t support row/column settings like natural table and the
>> mapping doesn’t change this.
>>
>> Wolfgang
>
> as column setup for TABLEs by "\setupTABLE[c][1][width=1in]" is handy
> and is used frequently, would it be possible to provide identical
> mechanism for xtables?
all is popssible but it won't happen ... different approach ... you can
use named setups here
> From what I read in the manual, setting width of a column for xtable is
> provided by \startxcell[width=...] at the place of the first
> cell-in-that-column usage.
>
> Moreover, when xtable is built in two passes, in the first pass it might
> take a column (width) specification(s), if provided, and keep on reading
> xcell specification(s), considering xcell width, if provided.
it already does ... even more than two passes
> I guess to be handy to implement both \setupTABLE[c][...] and
> \setupxtable[c][...] in a similar way, especially when there is a simple
> mechanism which allows TABLE/xtable switching (ntb-to-xtb module).
it would also be pretty inefficient
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Mapping TABLE to xtable (module "ntb-to-xtb") doesn't recognize "c" option for columns
2019-02-20 8:15 ` Hans Hagen
@ 2019-02-20 9:51 ` Procházka Lukáš Ing.
2019-02-20 10:10 ` Hans Hagen
0 siblings, 1 reply; 6+ messages in thread
From: Procházka Lukáš Ing. @ 2019-02-20 9:51 UTC (permalink / raw)
To: ConTeXt
Hello Hans,
On Wed, 20 Feb 2019 09:15:40 +0100, Hans Hagen <j.hagen@xs4all.nl> wrote:
>> as column setup for TABLEs by "\setupTABLE[c][1][width=1in]" is handy
>> and is used frequently, would it be possible to provide identical
>> mechanism for xtables?
>
> all is possible but it won't happen ... different approach ... you can use named setups here
should you provide a MWE? - I cannot find an example of usage setups for setting column width; something like:
\startsetups MyXTable
% How to specify the width of the first column here?
\stopsetups
\startxtable[setup=MyXTable]
...
\stopxtable
Best regards,
Lukas
> Hans
--
Ing. Lukáš Procházka | mailto:LPr@pontex.cz
Pontex s. r. o. | mailto:pontex@pontex.cz | http://www.pontex.cz | IDDS: nrpt3sn | IČO: 40763439
Bezová 1658
147 14 Praha 4
Mob.: +420 702 033 396
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: Mapping TABLE to xtable (module "ntb-to-xtb") doesn't recognize "c" option for columns
2019-02-20 9:51 ` Procházka Lukáš Ing.
@ 2019-02-20 10:10 ` Hans Hagen
0 siblings, 0 replies; 6+ messages in thread
From: Hans Hagen @ 2019-02-20 10:10 UTC (permalink / raw)
To: mailing list for ConTeXt users, Procházka Lukáš Ing.
On 2/20/2019 10:51 AM, Procházka Lukáš Ing. wrote:
> Hello Hans,
>
> On Wed, 20 Feb 2019 09:15:40 +0100, Hans Hagen <j.hagen@xs4all.nl> wrote:
>
>>> as column setup for TABLEs by "\setupTABLE[c][1][width=1in]" is handy
>>> and is used frequently, would it be possible to provide identical
>>> mechanism for xtables?
>>
>> all is possible but it won't happen ... different approach ... you can
>> use named setups here
>
> should you provide a MWE? - I cannot find an example of usage setups for
> setting column width; something like:
>
> \startsetups MyXTable
> % How to specify the width of the first column here?
> \stopsetups
>
> \startxtable[setup=MyXTable]
> ...
> \stopxtable
\setup*
did you look at the manual?
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2019-02-20 10:10 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-02-19 20:27 Mapping TABLE to xtable (module "ntb-to-xtb") doesn't recognize "c" option for columns Procházka Lukáš Ing.
2019-02-19 20:35 ` Wolfgang Schuster
2019-02-20 8:06 ` Procházka Lukáš Ing.
2019-02-20 8:15 ` Hans Hagen
2019-02-20 9:51 ` Procházka Lukáš Ing.
2019-02-20 10:10 ` Hans Hagen
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).