* Re: Re: Helvetica ?
@ 2005-03-13 19:21 Steffen Wolfrum
2005-03-14 9:42 ` Patrick Gundlach
0 siblings, 1 reply; 10+ messages in thread
From: Steffen Wolfrum @ 2005-03-13 19:21 UTC (permalink / raw)
Hi Patrick,
Patrick Gundlach <patrick@gundla.ch> wrote:
> Hello Steffen,
>
> do you have psfnss (LaTeX) installed?
>
> Patrick
Yes, sure. As part of Gerbens "2004 stable".
But this doesn't seem to be enough.
Steffen
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Helvetica ?
2005-03-13 19:21 Re: Helvetica ? Steffen Wolfrum
@ 2005-03-14 9:42 ` Patrick Gundlach
0 siblings, 0 replies; 10+ messages in thread
From: Patrick Gundlach @ 2005-03-14 9:42 UTC (permalink / raw)
Hello,
>> do you have psfnss (LaTeX) installed?
> Yes, sure. As part of Gerbens "2004 stable".
> But this doesn't seem to be enough.
OK, it looks as if you have problems with mapfiles:
> Warning: pdfetex (file ec-urw-times.map): cannot open font map file
> {/usr/local/teTeX/share/texmf.local/fonts/map/pdftex/context/original-youngryu-
> tx.map}
> Warning: pdfetex (file ec-urw-helvetica.map): cannot open font map file
>
> Warning: pdfetex (file ec-urw-courier.map): cannot open font map file
> ]
> systems : end file helve at line 25
> )
> Warning: pdfetex (file phvr8r): Font phvr8r at 86 not found
Perhaps Gerben knows what is going on here. What is the output of the
shell command:
grep phvr8r `kpsewhich pdftex.map`
Patrick
--
ConTeXt wiki: http://contextgarden.net
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Helvetica!
2005-03-14 15:57 Steffen Wolfrum
@ 2005-03-14 16:58 ` Patrick Gundlach
0 siblings, 0 replies; 10+ messages in thread
From: Patrick Gundlach @ 2005-03-14 16:58 UTC (permalink / raw)
Hi,
somehow your 8r-base.map doesn't get read. I wonder why. If you use
\setupencoding[default=ec]
it should work ok. But: check your cont-sys.tex and update it
according to cont-sys.ori. There is a statement like:
\loadmapfile[8r-base.map]
That should be in there for correct mapfile handling. After that, your
file should run OK. See the output from your logfile:
fonts : using map file: original-base
fonts : using map file: ec-public-lm
fonts : using map file: ec-base
...
There is no 8r-base.
Patrick
--
ConTeXt wiki: http://contextgarden.net
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Helvetica ?
2005-03-14 13:07 Re: Helvetica ? Steffen Wolfrum
@ 2005-03-14 13:54 ` Patrick Gundlach
0 siblings, 0 replies; 10+ messages in thread
From: Patrick Gundlach @ 2005-03-14 13:54 UTC (permalink / raw)
Hello Steffen,
> \usetypescript [adobekb][\defaultencoding]
> \usetypescript [postscript][\defaultencoding]
> \setupbodyfont[pos,ss,12pt]
>
> \starttext
> foo
> \stoptext
>
>
> But it doesn't work on live.contextgarden.net ?!
It does. The server is sometimes overloaded.
So now your log file would be interesting -)
Patrick
--
ConTeXt wiki: http://contextgarden.net
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Helvetica ?
2005-03-14 10:43 Steffen Wolfrum
@ 2005-03-14 11:30 ` Patrick Gundlach
0 siblings, 0 replies; 10+ messages in thread
From: Patrick Gundlach @ 2005-03-14 11:30 UTC (permalink / raw)
Hi,
[...]
> $ grep phvr8r `kpsewhich pdftex.map`
> phvr8r NimbusSanL-Regu "TeXBase1Encoding ReEncodeFont" <8r.enc <uhvr8a.pfb
> phvr8rn NimbusSanL-ReguCond "TeXBase1Encoding ReEncodeFont" <8r.enc
> <uhvr8ac.pfb
OK, that looks fine. Please post your logfile and make sure it runs ok
on live.contextgarden.net
Patrick
--
ConTeXt wiki: http://contextgarden.net
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Helvetica ?
2005-03-11 16:59 Steffen Wolfrum
2005-03-11 17:29 ` Adam Lindsay
2005-03-11 20:24 ` Otared Kavian
@ 2005-03-13 16:41 ` Patrick Gundlach
2 siblings, 0 replies; 10+ messages in thread
From: Patrick Gundlach @ 2005-03-13 16:41 UTC (permalink / raw)
Hello Steffen,
do you have psfnss (LaTeX) installed?
Patrick
--
ConTeXt wiki: http://contextgarden.net
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Helvetica ?
@ 2005-03-11 20:32 Steffen Wolfrum
0 siblings, 0 replies; 10+ messages in thread
From: Steffen Wolfrum @ 2005-03-11 20:32 UTC (permalink / raw)
Adam Lindsay <atl@comp.lancs.ac.uk> wrote:
> Steffen Wolfrum said this at Fri, 11 Mar 2005 17:59:30 +0100:
>
> >> \usetypescript [adobekb][\defaultencoding]
> >> \usetypescript [postscript][\defaultencoding]
> >> \setupbodyfont[pos,ss,12pt]
>
> I'm taking a leap with this, because I don't have my gwTeX box at hand,
> but try
>
> \usetypescript [adobekb] [8r]
> \usetypescript [postscript] [8r]
> \setupbodyfont [pos,ss,12pt]
>
> gwTeX (IIRC) has a full complement of adobe 8r metrics. Note that
> helvetica in the postscript typescript is scaled at 90% so "12pt"
> actually means 10.8pt.
Then the error log changes. Now we have:
! Font \*12ptsstf*=uhvr8t at 12.0pt not loadable: Metric (TFM) file not found.
Steffen
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Helvetica ?
2005-03-11 16:59 Steffen Wolfrum
2005-03-11 17:29 ` Adam Lindsay
@ 2005-03-11 20:24 ` Otared Kavian
2005-03-13 16:41 ` Patrick Gundlach
2 siblings, 0 replies; 10+ messages in thread
From: Otared Kavian @ 2005-03-11 20:24 UTC (permalink / raw)
Cc: ntg-context
At 17:59 +0100 11/03/05, Steffen Wolfrum wrote:
>Hi,
>
>I used to install the fonts that I need for contexing.
>
>But for the current project only Helvetica is needed, and so I
>remembered Patrick saying:
>
>> using Helvetica works for me:
>> --------------------------------------------------
>> \usetypescript [adobekb][\defaultencoding]
>> \usetypescript [postscript][\defaultencoding]
>> \setupbodyfont[pos,ss,12pt]
>>
>> \starttext
>> foo
>> \stoptext
>
>
For me the following works fine:
%%%% begin
\usetypescript [adobekb][\defaultencoding]
\setupbodyfont[pos]
%% for helvetica uncomment this
\usetypescript[helvetica][\defaultencoding]
\setupbodyfont[helvetica,ss,12pt]
%% for times uncomment this
%\usetypescript[times][\defaultencoding]
%\setupbodyfont[times,12pt]
\starttext
\input knuth
\bigskip
And this should be some maths with PostScript fonts (but not with
Helvetica\dots).
\startformula
{a \over b} = {c \over d} \iff ad - bc = 0, \qquad \int_0^{2\pi}
\sin(x)^2dx =\pi, \qquad {\rm e}^{{\rm i}\pi} + 1 = 0.
\stopformula
\stoptext
%%%% end
Somehow, unlike Adam's suggestion, I can't replace [\defaultencoding] by [8r].
Cheers: OK
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Helvetica ?
2005-03-11 16:59 Steffen Wolfrum
@ 2005-03-11 17:29 ` Adam Lindsay
2005-03-11 20:24 ` Otared Kavian
2005-03-13 16:41 ` Patrick Gundlach
2 siblings, 0 replies; 10+ messages in thread
From: Adam Lindsay @ 2005-03-11 17:29 UTC (permalink / raw)
Steffen Wolfrum said this at Fri, 11 Mar 2005 17:59:30 +0100:
>> \usetypescript [adobekb][\defaultencoding]
>> \usetypescript [postscript][\defaultencoding]
>> \setupbodyfont[pos,ss,12pt]
I'm taking a leap with this, because I don't have my gwTeX box at hand,
but try
\usetypescript [adobekb] [8r]
\usetypescript [postscript] [8r]
\setupbodyfont [pos,ss,12pt]
gwTeX (IIRC) has a full complement of adobe 8r metrics. Note that
helvetica in the postscript typescript is scaled at 90% so "12pt"
actually means 10.8pt.
--
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Adam T. Lindsay, Computing Dept. atl@comp.lancs.ac.uk
Lancaster University, InfoLab21 +44(0)1524/510.514
Lancaster, LA1 4WA, UK Fax:+44(0)1524/510.492
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-
^ permalink raw reply [flat|nested] 10+ messages in thread
* Helvetica ?
@ 2005-03-11 16:59 Steffen Wolfrum
2005-03-11 17:29 ` Adam Lindsay
` (2 more replies)
0 siblings, 3 replies; 10+ messages in thread
From: Steffen Wolfrum @ 2005-03-11 16:59 UTC (permalink / raw)
Hi,
I used to install the fonts that I need for contexing.
But for the current project only Helvetica is needed, and so I
remembered Patrick saying:
> using Helvetica works for me:
> --------------------------------------------------
> \usetypescript [adobekb][\defaultencoding]
> \usetypescript [postscript][\defaultencoding]
> \setupbodyfont[pos,ss,12pt]
>
> \starttext
> foo
> \stoptext
But not for me. The same file as above results in:
> Warning: pdfetex (file ec-urw-times.map): cannot open font map file
>
>{/usr/local/teTeX/share/texmf.local/fonts/map/pdftex/context/original-youngryu-
> tx.map}
> Warning: pdfetex (file ec-urw-helvetica.map): cannot open font map file
>
> Warning: pdfetex (file ec-urw-courier.map): cannot open font map file
> ]
> systems : end file helve at line 25
> )
> Warning: pdfetex (file phvr8r): Font phvr8r at 86 not found
What is missing? I am working (under OSX) with Hans' recent Beta,
with Gerbens latest tex i-package, and I also saw various helvetica
pfb files being installed with Gerbens distro.
So, shouldn't contexing with Helvetica work just out-of-the-box, as
Patrick said?
Steffen
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2005-03-14 16:58 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2005-03-13 19:21 Re: Helvetica ? Steffen Wolfrum
2005-03-14 9:42 ` Patrick Gundlach
-- strict thread matches above, loose matches on Subject: below --
2005-03-14 15:57 Steffen Wolfrum
2005-03-14 16:58 ` Helvetica! Patrick Gundlach
2005-03-14 13:07 Re: Helvetica ? Steffen Wolfrum
2005-03-14 13:54 ` Patrick Gundlach
2005-03-14 10:43 Steffen Wolfrum
2005-03-14 11:30 ` Patrick Gundlach
2005-03-11 20:32 Steffen Wolfrum
2005-03-11 16:59 Steffen Wolfrum
2005-03-11 17:29 ` Adam Lindsay
2005-03-11 20:24 ` Otared Kavian
2005-03-13 16:41 ` Patrick Gundlach
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).