* Typesetting Markdown – Part 5: Interpolation @ 2019-07-06 19:08 Thangalin 2019-07-07 14:17 ` Aditya Mahajan 0 siblings, 1 reply; 8+ messages in thread From: Thangalin @ 2019-07-06 19:08 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 429 bytes --] Hello again! This part of the series describes how to reference *interpolated* strings inside Markdown documents. https://dave.autonoma.ca/blog/2019/07/06/typesetting-markdown-part-5/ There's a section at the end about eliminating the table of contents from a reusable document template. I would have preferred using setups, rather than redefining the \completecontent macro, but didn't see an obvious way to do so. Thoughts? [-- Attachment #1.2: Type: text/html, Size: 684 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Typesetting Markdown – Part 5: Interpolation 2019-07-06 19:08 Typesetting Markdown – Part 5: Interpolation Thangalin @ 2019-07-07 14:17 ` Aditya Mahajan 2019-07-07 18:58 ` Thangalin 0 siblings, 1 reply; 8+ messages in thread From: Aditya Mahajan @ 2019-07-07 14:17 UTC (permalink / raw) To: mailing list for ConTeXt users On Sat, 6 Jul 2019, Thangalin wrote: > Hello again! > > This part of the series describes how to reference *interpolated* strings > inside Markdown documents. > https://dave.autonoma.ca/blog/2019/07/06/typesetting-markdown-part-5/ > > There's a section at the end about eliminating the table of contents from a > reusable document template. I would have preferred using setups, rather > than redefining the \completecontent macro, but didn't see an obvious way > to do so. Why not simply omit \compltecontent from the pandoc template? Aditya ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Typesetting Markdown – Part 5: Interpolation 2019-07-07 14:17 ` Aditya Mahajan @ 2019-07-07 18:58 ` Thangalin 2019-07-07 19:17 ` Aditya Mahajan 0 siblings, 1 reply; 8+ messages in thread From: Thangalin @ 2019-07-07 18:58 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1029 bytes --] Thank you Aditya. The main.tex file is meant to be reusable for different document styles. By removing \completecontent altogether from the main template, it would preclude a different document from reusing the main.tex template with a table of contents. I'd like the template to be "reusable"; making modifications to "main.tex" --- or creating a copy --- would subvert that goal. On Sun, Jul 7, 2019 at 7:17 AM Aditya Mahajan <adityam@umich.edu> wrote: > On Sat, 6 Jul 2019, Thangalin wrote: > > > Hello again! > > > > This part of the series describes how to reference *interpolated* strings > > inside Markdown documents. > > https://dave.autonoma.ca/blog/2019/07/06/typesetting-markdown-part-5/ > > > > There's a section at the end about eliminating the table of contents > from a > > reusable document template. I would have preferred using setups, rather > > than redefining the \completecontent macro, but didn't see an obvious way > > to do so. > > Why not simply omit \compltecontent from the pandoc template? > > > [-- Attachment #1.2: Type: text/html, Size: 1574 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Typesetting Markdown – Part 5: Interpolation 2019-07-07 18:58 ` Thangalin @ 2019-07-07 19:17 ` Aditya Mahajan 2019-07-08 17:13 ` Thangalin 0 siblings, 1 reply; 8+ messages in thread From: Aditya Mahajan @ 2019-07-07 19:17 UTC (permalink / raw) To: mailing list for ConTeXt users On Sun, 7 Jul 2019, Thangalin wrote: > Thank you Aditya. > > The main.tex file is meant to be reusable for different document styles. By > removing \completecontent altogether from the main template, it would > preclude a different document from reusing the main.tex template with a > table of contents. I'd like the template to be "reusable"; making > modifications to "main.tex" --- or creating a copy --- would subvert that > goal. Pandoc allows that. For example, see line 140 of the default context template: https://github.com/jgm/pandoc-templates/blob/master/default.context I don't remember the exact command line parameters for pandoc that set the toc flag to true. An equivalent method will be to control this using a ConTeXt mode. Redefining \completecontent to \empty seems too drastic. Aditya ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Typesetting Markdown – Part 5: Interpolation 2019-07-07 19:17 ` Aditya Mahajan @ 2019-07-08 17:13 ` Thangalin 0 siblings, 0 replies; 8+ messages in thread From: Thangalin @ 2019-07-08 17:13 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 1810 bytes --] Thanks again for the great ideas. The downside is that it comes with a lot of extra ConTeXt setup code. My understanding is that the toc parameter to pandoc only works when creating a standalone document. I think \def\completecontent\empty is a bit more expressive of intent than \def\completecontent{}. Modes are probably the way to go, though. Thank you. On Sun, Jul 7, 2019 at 12:18 PM Aditya Mahajan <adityam@umich.edu> wrote: > > On Sun, 7 Jul 2019, Thangalin wrote: > > > Thank you Aditya. > > > > The main.tex file is meant to be reusable for different document styles. > By > > removing \completecontent altogether from the main template, it would > > preclude a different document from reusing the main.tex template with a > > table of contents. I'd like the template to be "reusable"; making > > modifications to "main.tex" --- or creating a copy --- would subvert that > > goal. > > Pandoc allows that. For example, see line 140 of the default context > template: > > https://github.com/jgm/pandoc-templates/blob/master/default.context > > I don't remember the exact command line parameters for pandoc that set > the toc flag to true. > > An equivalent method will be to control this using a ConTeXt mode. > Redefining \completecontent to \empty seems too drastic. > > Aditya > > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://context.aanhet.net > archive : https://bitbucket.org/phg/context-mirror/commits/ > wiki : http://contextgarden.net > > ___________________________________________________________________________________ > [-- Attachment #1.2: Type: text/html, Size: 2885 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <mailman.406.1562572373.1354.ntg-context@ntg.nl>]
* Re: Typesetting Markdown – Part 5: Interpolation [not found] <mailman.406.1562572373.1354.ntg-context@ntg.nl> @ 2019-07-08 18:26 ` Andres Conrado 2019-07-09 18:06 ` Thangalin 0 siblings, 1 reply; 8+ messages in thread From: Andres Conrado @ 2019-07-08 18:26 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 13904 bytes --] You can do it on the template... you can use a yaml variable to determine if the toc should be printed or not. Like so: yaml file: --- toc: true ... template file: %%%%%%% $if(toc)$ \completecontent $endif$ %%%%%%% Andrés Conrado Montoya http://chiquitico.org El lun., 8 jul. 2019 a las 2:52, <ntg-context-request@ntg.nl> escribió: > Send ntg-context mailing list submissions to > ntg-context@ntg.nl > > To subscribe or unsubscribe via the World Wide Web, visit > https://mailman.ntg.nl/mailman/listinfo/ntg-context > or, via email, send a message with subject or body 'help' to > ntg-context-request@ntg.nl > > You can reach the person managing the list at > ntg-context-owner@ntg.nl > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of ntg-context digest..." > > > Today's Topics: > > 1. Re: Typesetting Markdown – Part 5: Interpolation > (Aditya Mahajan) > 2. Re: Typesetting Markdown – Part 5: Interpolation (Thangalin) > 3. Re: Typesetting Markdown – Part 5: Interpolation > (Aditya Mahajan) > 4. request for \definefontfamily and \definefallbackfamily > (Pablo Rodriguez) > 5. Re: crappy names in the fontloader (Hans Hagen) > 6. problems with images, layers and crop marks (Henning Hraban Ramm) > 7. Re: problems with images, layers and crop marks (Hans Hagen) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sun, 7 Jul 2019 10:17:31 -0400 (EDT) > From: Aditya Mahajan <adityam@umich.edu> > To: mailing list for ConTeXt users <ntg-context@ntg.nl> > Subject: Re: [NTG-context] Typesetting Markdown – Part 5: > Interpolation > Message-ID: <nycvar.YAK.7.76.1907071012590.13567@nqv-guvaxcnq> > Content-Type: text/plain; charset=US-ASCII; format=flowed > > On Sat, 6 Jul 2019, Thangalin wrote: > > > Hello again! > > > > This part of the series describes how to reference *interpolated* strings > > inside Markdown documents. > > https://dave.autonoma.ca/blog/2019/07/06/typesetting-markdown-part-5/ > > > > There's a section at the end about eliminating the table of contents > from a > > reusable document template. I would have preferred using setups, rather > > than redefining the \completecontent macro, but didn't see an obvious way > > to do so. > > Why not simply omit \compltecontent from the pandoc template? > > Aditya > > > > ------------------------------ > > Message: 2 > Date: Sun, 7 Jul 2019 11:58:12 -0700 > From: Thangalin <thangalin@gmail.com> > To: mailing list for ConTeXt users <ntg-context@ntg.nl> > Subject: Re: [NTG-context] Typesetting Markdown – Part 5: > Interpolation > Message-ID: > <CAANrE7qd81BudwSHBWufu=MpDDUPn5fh8ZBM63qLVZ160gZH= > g@mail.gmail.com> > Content-Type: text/plain; charset="utf-8" > > Thank you Aditya. > > The main.tex file is meant to be reusable for different document styles. By > removing \completecontent altogether from the main template, it would > preclude a different document from reusing the main.tex template with a > table of contents. I'd like the template to be "reusable"; making > modifications to "main.tex" --- or creating a copy --- would subvert that > goal. > > On Sun, Jul 7, 2019 at 7:17 AM Aditya Mahajan <adityam@umich.edu> wrote: > > > On Sat, 6 Jul 2019, Thangalin wrote: > > > > > Hello again! > > > > > > This part of the series describes how to reference *interpolated* > strings > > > inside Markdown documents. > > > https://dave.autonoma.ca/blog/2019/07/06/typesetting-markdown-part-5/ > > > > > > There's a section at the end about eliminating the table of contents > > from a > > > reusable document template. I would have preferred using setups, rather > > > than redefining the \completecontent macro, but didn't see an obvious > way > > > to do so. > > > > Why not simply omit \compltecontent from the pandoc template? > > > > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: < > http://mailman.ntg.nl/pipermail/ntg-context/attachments/20190707/25ca6215/attachment-0001.html > > > > ------------------------------ > > Message: 3 > Date: Sun, 7 Jul 2019 15:17:50 -0400 (EDT) > From: Aditya Mahajan <adityam@umich.edu> > To: mailing list for ConTeXt users <ntg-context@ntg.nl> > Subject: Re: [NTG-context] Typesetting Markdown – Part 5: > Interpolation > Message-ID: <nycvar.YAK.7.76.1907071512000.13567@nqv-guvaxcnq> > Content-Type: text/plain; charset=US-ASCII; format=flowed > > > On Sun, 7 Jul 2019, Thangalin wrote: > > > Thank you Aditya. > > > > The main.tex file is meant to be reusable for different document styles. > By > > removing \completecontent altogether from the main template, it would > > preclude a different document from reusing the main.tex template with a > > table of contents. I'd like the template to be "reusable"; making > > modifications to "main.tex" --- or creating a copy --- would subvert that > > goal. > > Pandoc allows that. For example, see line 140 of the default context > template: > > https://github.com/jgm/pandoc-templates/blob/master/default.context > > I don't remember the exact command line parameters for pandoc that set > the toc flag to true. > > An equivalent method will be to control this using a ConTeXt mode. > Redefining \completecontent to \empty seems too drastic. > > Aditya > > > > ------------------------------ > > Message: 4 > Date: Sun, 7 Jul 2019 21:29:49 +0200 > From: Pablo Rodriguez <oinos@gmx.es> > To: mailing list for ConTeXt users <ntg-context@ntg.nl> > Subject: [NTG-context] request for \definefontfamily and > \definefallbackfamily > Message-ID: <857b6e26-0b65-c2a4-6569-e664f0111d1e@gmx.es> > Content-Type: text/plain; charset=utf-8 > > Hi Wolfgang, > > I have two requests to be implemented in \definefontfamily. > > The first one is that is able to load fonts not defined as entries in > the font database. > > Here you have a minimal sample: > > \definefont[Test][file:texgyrepagella-regular.otf at 10pt] > \definefont[TestOne][file:texgyrepagella-regular-500.otf at 10pt] > > \definefontfamily [mainface] [rm] [Pagella] > [tf={file:texgyrepagella-regular.otf}, > bf={file:texgyrepagella-regular-500.otf}] > > \setupbodyfont[mainface] > \starttext > normal\\ > \bf bold not working\\ > > \Test this works > \TestOne this works > \stoptext > > The second one would be to allow method=uppercase to > \definefallbackfamily, so it could be used to fake small caps (such as > in https://mailman.ntg.nl/pipermail/ntg-context/2018/092878.html. > > Many thanks for your help, > > Pablo > -- > http://www.ousia.tk > > > ------------------------------ > > Message: 5 > Date: Sun, 7 Jul 2019 23:42:11 +0200 > From: Hans Hagen <j.hagen@xs4all.nl> > To: ntg-context@ntg.nl > Subject: Re: [NTG-context] crappy names in the fontloader > Message-ID: <ea884d13-5c0e-9772-8f69-c2f13ddb224e@xs4all.nl> > Content-Type: text/plain; charset=utf-8; format=flowed > > On 7/6/2019 6:36 PM, Marcel Fabian Krüger wrote: > > Hi everyone, > > > > under default settings, the fontloaders discards all glyph names which > > are considered "crappy", meaning matching the "p_crappyname" pattern in > > "font-oup.lua". For some names this makes a lot of sense. For example > > the name "uni0303" is considered "crappy" and it really provides no > > useful information. Then there are other names like "t_uni0303" which > > are still considered "crappy" while they actually aren't completely > > useless. So I think there would be some value in preserving them. Of > > course, you can always enable "otf.keepnames" if you need names like > > this. > > > > But I actually want to talk about another class of names: Look at > > "Udotbelow". This is IMHO a perfectly normal and useful name, but the > > fontloader still considers it "crappy" because it starts with a "U" > > followed by a letter which could be a hexadecimal number. > > > > I think this is a bit over-agressive. Maybe the "p_crappyname" pattern > > could be changed to only look for "u<hexadecimal>" if followed by > > "p_done", marking the end of a component? > i'll look into it (irr in generic mode (latex etc) one can disable that > 'feature' which i thought happened) > > Hans > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl > ----------------------------------------------------------------- > > > ------------------------------ > > Message: 6 > Date: Sun, 07 Jul 2019 23:06:56 +0000 > From: Henning Hraban Ramm <texml@fiee.net> > To: ntg-context@ntg.nl > Subject: [NTG-context] problems with images, layers and crop marks > Message-ID: > <20190707230656.Horde.IVjTQk9tNtFVGH0IBsHNXDk@webmail.fiee.net> > Content-Type: text/plain; charset=utf-8; format=flowed; DelSp=Yes > > Hi all, > I’m quite quiet at the moment, because I can access my mailing list > address only via inconvenient webmail; since I updated MacOS, neither > Apple Mail nor Thunderbird will take my password anymore... :-(( > Besides, I’m currently well paid for working with LaTeX, and my other > projects get less time. > > > Anyway, one of our authors finally submitted her final corrections, > and "of course" my ConTeXt setup that still worked well in May doesn’t > behave any more: > > * stacked layers won’t work on the first page (there should be a title > bar above an image; it works on the back cover, but not on the front; > but I can enable one of both layers) > > That might be related to: > > * on some right pages, including p.1 (cover), crop marks are shifted > one page width to the right. > > * on some pages, crop marks are shifted vertically; might be related > to using \offset for image placement. > > I’m trying to cook up MWEs, but the behaviour is so strange and > irregular, that I don’t know if I can reproduce it in a simpler > environment... I suspect my combined use of postponing, makeups, > layers and \offset might have grown side effects since May. > > Any ideas? > > > Greetlings, Hraban > > > Greetlings, Hraban > Grüßlinge, Hraban > --- > https://www.fiee.net > http://wiki.contextgarden.net > https://www.dreiviertelhaus.de > GPG Key ID 1C9B22FD > > > > ------------------------------ > > Message: 7 > Date: Mon, 8 Jul 2019 09:52:51 +0200 > From: Hans Hagen <j.hagen@xs4all.nl> > To: mailing list for ConTeXt users <ntg-context@ntg.nl>, Henning > Hraban Ramm <texml@fiee.net> > Subject: Re: [NTG-context] problems with images, layers and crop marks > Message-ID: <26b17c1c-04b7-7398-4c5f-f514c942671e@xs4all.nl> > Content-Type: text/plain; charset=utf-8; format=flowed > > On 7/8/2019 1:06 AM, Henning Hraban Ramm wrote: > > Hi all, > > I’m quite quiet at the moment, because I can access my mailing list > > address only via inconvenient webmail; since I updated MacOS, neither > > Apple Mail nor Thunderbird will take my password anymore... :-(( > > Besides, I’m currently well paid for working with LaTeX, and my other > > projects get less time. > > > > > > Anyway, one of our authors finally submitted her final corrections, and > > "of course" my ConTeXt setup that still worked well in May doesn’t > > behave any more: > > > > * stacked layers won’t work on the first page (there should be a title > > bar above an image; it works on the back cover, but not on the front; > > but I can enable one of both layers) > > > > That might be related to: > > > > * on some right pages, including p.1 (cover), crop marks are shifted one > > page width to the right. > > > > * on some pages, crop marks are shifted vertically; might be related to > > using \offset for image placement. > > > > I’m trying to cook up MWEs, but the behaviour is so strange and > > irregular, that I don’t know if I can reproduce it in a simpler > > environment... I suspect my combined use of postponing, makeups, layers > > and \offset might have grown side effects since May. > > > > Any ideas? > afaik nothing fundamental changed in these areas (ok, maybe you operate > out of the formal functionality) ... of course, if you're using lmtx it > might be that something got fixed in there, as at that moment it was > more experimental than it is now > > Hans > > ----------------------------------------------------------------- > Hans Hagen | PRAGMA ADE > Ridderstraat 27 | 8061 GH Hasselt | The Netherlands > tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl > ----------------------------------------------------------------- > > > ------------------------------ > > Subject: Digest Footer > > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://tex.aanhet.net > archive : https://foundry.supelec.fr/projects/contextrev/ > wiki : http://contextgarden.net > > ___________________________________________________________________________________ > > > ------------------------------ > > End of ntg-context Digest, Vol 181, Issue 8 > ******************************************* > [-- Attachment #1.2: Type: text/html, Size: 20040 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: Typesetting Markdown – Part 5: Interpolation 2019-07-08 18:26 ` Andres Conrado @ 2019-07-09 18:06 ` Thangalin 0 siblings, 0 replies; 8+ messages in thread From: Thangalin @ 2019-07-09 18:06 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 16222 bytes --] That's another intriguing approach, Andrés, thank you. The approach faces some hurdles. First, the template file (main.tex) is written in ConTeXt, so it never sees the YAML variables, nor can it be used to interpret pandoc's conditional expressions. Second, moving the \completecontent macro out of main.tex and into Markdown (e.g., 01.md, being the first chapter) so that the conditional expression can be evaluated using pandoc mixes content with presentation logic. Modes are a good approach in this case because the "context" command can take a "mode" command-line argument. This provides presentation controls that neither the YAML nor the Markdown need consider. Adding presentation logic to the ConTeXt template (i.e., introducing \startmode and \startnotmode into main.tex) is acceptable because ConTeXt is wholly responsible for the appearance of the final document. See: https://wiki.contextgarden.net/Modes This then allows development of command-line arguments from shell scripts to control how the document is presented when built, which is a little bit more flexible than maintaining YAML variables. Also, ideally, the YAML variables would be used for controlling only content, not presentation logic. Thanks again, Andrés. On Mon, Jul 8, 2019 at 11:27 AM Andres Conrado <elandi@chiquitico.org> wrote: > You can do it on the template... you can use a yaml variable to determine > if the toc should be printed or not. Like so: > > yaml file: > --- > toc: true > ... > > template file: > %%%%%%% > $if(toc)$ > \completecontent > $endif$ > %%%%%%% > > > Andrés Conrado Montoya > http://chiquitico.org > > > El lun., 8 jul. 2019 a las 2:52, <ntg-context-request@ntg.nl> escribió: > >> Send ntg-context mailing list submissions to >> ntg-context@ntg.nl >> >> To subscribe or unsubscribe via the World Wide Web, visit >> https://mailman.ntg.nl/mailman/listinfo/ntg-context >> or, via email, send a message with subject or body 'help' to >> ntg-context-request@ntg.nl >> >> You can reach the person managing the list at >> ntg-context-owner@ntg.nl >> >> When replying, please edit your Subject line so it is more specific >> than "Re: Contents of ntg-context digest..." >> >> >> Today's Topics: >> >> 1. Re: Typesetting Markdown – Part 5: Interpolation >> (Aditya Mahajan) >> 2. Re: Typesetting Markdown – Part 5: Interpolation (Thangalin) >> 3. Re: Typesetting Markdown – Part 5: Interpolation >> (Aditya Mahajan) >> 4. request for \definefontfamily and \definefallbackfamily >> (Pablo Rodriguez) >> 5. Re: crappy names in the fontloader (Hans Hagen) >> 6. problems with images, layers and crop marks (Henning Hraban Ramm) >> 7. Re: problems with images, layers and crop marks (Hans Hagen) >> >> >> ---------------------------------------------------------------------- >> >> Message: 1 >> Date: Sun, 7 Jul 2019 10:17:31 -0400 (EDT) >> From: Aditya Mahajan <adityam@umich.edu> >> To: mailing list for ConTeXt users <ntg-context@ntg.nl> >> Subject: Re: [NTG-context] Typesetting Markdown – Part 5: >> Interpolation >> Message-ID: <nycvar.YAK.7.76.1907071012590.13567@nqv-guvaxcnq> >> Content-Type: text/plain; charset=US-ASCII; format=flowed >> >> On Sat, 6 Jul 2019, Thangalin wrote: >> >> > Hello again! >> > >> > This part of the series describes how to reference *interpolated* >> strings >> > inside Markdown documents. >> > https://dave.autonoma.ca/blog/2019/07/06/typesetting-markdown-part-5/ >> > >> > There's a section at the end about eliminating the table of contents >> from a >> > reusable document template. I would have preferred using setups, rather >> > than redefining the \completecontent macro, but didn't see an obvious >> way >> > to do so. >> >> Why not simply omit \compltecontent from the pandoc template? >> >> Aditya >> >> >> >> ------------------------------ >> >> Message: 2 >> Date: Sun, 7 Jul 2019 11:58:12 -0700 >> From: Thangalin <thangalin@gmail.com> >> To: mailing list for ConTeXt users <ntg-context@ntg.nl> >> Subject: Re: [NTG-context] Typesetting Markdown – Part 5: >> Interpolation >> Message-ID: >> <CAANrE7qd81BudwSHBWufu=MpDDUPn5fh8ZBM63qLVZ160gZH= >> g@mail.gmail.com> >> Content-Type: text/plain; charset="utf-8" >> >> Thank you Aditya. >> >> The main.tex file is meant to be reusable for different document styles. >> By >> removing \completecontent altogether from the main template, it would >> preclude a different document from reusing the main.tex template with a >> table of contents. I'd like the template to be "reusable"; making >> modifications to "main.tex" --- or creating a copy --- would subvert that >> goal. >> >> On Sun, Jul 7, 2019 at 7:17 AM Aditya Mahajan <adityam@umich.edu> wrote: >> >> > On Sat, 6 Jul 2019, Thangalin wrote: >> > >> > > Hello again! >> > > >> > > This part of the series describes how to reference *interpolated* >> strings >> > > inside Markdown documents. >> > > https://dave.autonoma.ca/blog/2019/07/06/typesetting-markdown-part-5/ >> > > >> > > There's a section at the end about eliminating the table of contents >> > from a >> > > reusable document template. I would have preferred using setups, >> rather >> > > than redefining the \completecontent macro, but didn't see an obvious >> way >> > > to do so. >> > >> > Why not simply omit \compltecontent from the pandoc template? >> > >> > >> > >> -------------- next part -------------- >> An HTML attachment was scrubbed... >> URL: < >> http://mailman.ntg.nl/pipermail/ntg-context/attachments/20190707/25ca6215/attachment-0001.html >> > >> >> ------------------------------ >> >> Message: 3 >> Date: Sun, 7 Jul 2019 15:17:50 -0400 (EDT) >> From: Aditya Mahajan <adityam@umich.edu> >> To: mailing list for ConTeXt users <ntg-context@ntg.nl> >> Subject: Re: [NTG-context] Typesetting Markdown – Part 5: >> Interpolation >> Message-ID: <nycvar.YAK.7.76.1907071512000.13567@nqv-guvaxcnq> >> Content-Type: text/plain; charset=US-ASCII; format=flowed >> >> >> On Sun, 7 Jul 2019, Thangalin wrote: >> >> > Thank you Aditya. >> > >> > The main.tex file is meant to be reusable for different document >> styles. By >> > removing \completecontent altogether from the main template, it would >> > preclude a different document from reusing the main.tex template with a >> > table of contents. I'd like the template to be "reusable"; making >> > modifications to "main.tex" --- or creating a copy --- would subvert >> that >> > goal. >> >> Pandoc allows that. For example, see line 140 of the default context >> template: >> >> https://github.com/jgm/pandoc-templates/blob/master/default.context >> >> I don't remember the exact command line parameters for pandoc that set >> the toc flag to true. >> >> An equivalent method will be to control this using a ConTeXt mode. >> Redefining \completecontent to \empty seems too drastic. >> >> Aditya >> >> >> >> ------------------------------ >> >> Message: 4 >> Date: Sun, 7 Jul 2019 21:29:49 +0200 >> From: Pablo Rodriguez <oinos@gmx.es> >> To: mailing list for ConTeXt users <ntg-context@ntg.nl> >> Subject: [NTG-context] request for \definefontfamily and >> \definefallbackfamily >> Message-ID: <857b6e26-0b65-c2a4-6569-e664f0111d1e@gmx.es> >> Content-Type: text/plain; charset=utf-8 >> >> Hi Wolfgang, >> >> I have two requests to be implemented in \definefontfamily. >> >> The first one is that is able to load fonts not defined as entries in >> the font database. >> >> Here you have a minimal sample: >> >> \definefont[Test][file:texgyrepagella-regular.otf at 10pt] >> \definefont[TestOne][file:texgyrepagella-regular-500.otf at 10pt] >> >> \definefontfamily [mainface] [rm] [Pagella] >> [tf={file:texgyrepagella-regular.otf}, >> bf={file:texgyrepagella-regular-500.otf}] >> >> \setupbodyfont[mainface] >> \starttext >> normal\\ >> \bf bold not working\\ >> >> \Test this works >> \TestOne this works >> \stoptext >> >> The second one would be to allow method=uppercase to >> \definefallbackfamily, so it could be used to fake small caps (such as >> in https://mailman.ntg.nl/pipermail/ntg-context/2018/092878.html. >> >> Many thanks for your help, >> >> Pablo >> -- >> http://www.ousia.tk >> >> >> ------------------------------ >> >> Message: 5 >> Date: Sun, 7 Jul 2019 23:42:11 +0200 >> From: Hans Hagen <j.hagen@xs4all.nl> >> To: ntg-context@ntg.nl >> Subject: Re: [NTG-context] crappy names in the fontloader >> Message-ID: <ea884d13-5c0e-9772-8f69-c2f13ddb224e@xs4all.nl> >> Content-Type: text/plain; charset=utf-8; format=flowed >> >> On 7/6/2019 6:36 PM, Marcel Fabian Krüger wrote: >> > Hi everyone, >> > >> > under default settings, the fontloaders discards all glyph names which >> > are considered "crappy", meaning matching the "p_crappyname" pattern in >> > "font-oup.lua". For some names this makes a lot of sense. For example >> > the name "uni0303" is considered "crappy" and it really provides no >> > useful information. Then there are other names like "t_uni0303" which >> > are still considered "crappy" while they actually aren't completely >> > useless. So I think there would be some value in preserving them. Of >> > course, you can always enable "otf.keepnames" if you need names like >> > this. >> > >> > But I actually want to talk about another class of names: Look at >> > "Udotbelow". This is IMHO a perfectly normal and useful name, but the >> > fontloader still considers it "crappy" because it starts with a "U" >> > followed by a letter which could be a hexadecimal number. >> > >> > I think this is a bit over-agressive. Maybe the "p_crappyname" pattern >> > could be changed to only look for "u<hexadecimal>" if followed by >> > "p_done", marking the end of a component? >> i'll look into it (irr in generic mode (latex etc) one can disable that >> 'feature' which i thought happened) >> >> Hans >> >> ----------------------------------------------------------------- >> Hans Hagen | PRAGMA ADE >> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands >> tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl >> ----------------------------------------------------------------- >> >> >> ------------------------------ >> >> Message: 6 >> Date: Sun, 07 Jul 2019 23:06:56 +0000 >> From: Henning Hraban Ramm <texml@fiee.net> >> To: ntg-context@ntg.nl >> Subject: [NTG-context] problems with images, layers and crop marks >> Message-ID: >> <20190707230656.Horde.IVjTQk9tNtFVGH0IBsHNXDk@webmail.fiee.net> >> Content-Type: text/plain; charset=utf-8; format=flowed; DelSp=Yes >> >> Hi all, >> I’m quite quiet at the moment, because I can access my mailing list >> address only via inconvenient webmail; since I updated MacOS, neither >> Apple Mail nor Thunderbird will take my password anymore... :-(( >> Besides, I’m currently well paid for working with LaTeX, and my other >> projects get less time. >> >> >> Anyway, one of our authors finally submitted her final corrections, >> and "of course" my ConTeXt setup that still worked well in May doesn’t >> behave any more: >> >> * stacked layers won’t work on the first page (there should be a title >> bar above an image; it works on the back cover, but not on the front; >> but I can enable one of both layers) >> >> That might be related to: >> >> * on some right pages, including p.1 (cover), crop marks are shifted >> one page width to the right. >> >> * on some pages, crop marks are shifted vertically; might be related >> to using \offset for image placement. >> >> I’m trying to cook up MWEs, but the behaviour is so strange and >> irregular, that I don’t know if I can reproduce it in a simpler >> environment... I suspect my combined use of postponing, makeups, >> layers and \offset might have grown side effects since May. >> >> Any ideas? >> >> >> Greetlings, Hraban >> >> >> Greetlings, Hraban >> Grüßlinge, Hraban >> --- >> https://www.fiee.net >> http://wiki.contextgarden.net >> https://www.dreiviertelhaus.de >> GPG Key ID 1C9B22FD >> >> >> >> ------------------------------ >> >> Message: 7 >> Date: Mon, 8 Jul 2019 09:52:51 +0200 >> From: Hans Hagen <j.hagen@xs4all.nl> >> To: mailing list for ConTeXt users <ntg-context@ntg.nl>, Henning >> Hraban Ramm <texml@fiee.net> >> Subject: Re: [NTG-context] problems with images, layers and crop marks >> Message-ID: <26b17c1c-04b7-7398-4c5f-f514c942671e@xs4all.nl> >> Content-Type: text/plain; charset=utf-8; format=flowed >> >> On 7/8/2019 1:06 AM, Henning Hraban Ramm wrote: >> > Hi all, >> > I’m quite quiet at the moment, because I can access my mailing list >> > address only via inconvenient webmail; since I updated MacOS, neither >> > Apple Mail nor Thunderbird will take my password anymore... :-(( >> > Besides, I’m currently well paid for working with LaTeX, and my other >> > projects get less time. >> > >> > >> > Anyway, one of our authors finally submitted her final corrections, and >> > "of course" my ConTeXt setup that still worked well in May doesn’t >> > behave any more: >> > >> > * stacked layers won’t work on the first page (there should be a title >> > bar above an image; it works on the back cover, but not on the front; >> > but I can enable one of both layers) >> > >> > That might be related to: >> > >> > * on some right pages, including p.1 (cover), crop marks are shifted >> one >> > page width to the right. >> > >> > * on some pages, crop marks are shifted vertically; might be related to >> > using \offset for image placement. >> > >> > I’m trying to cook up MWEs, but the behaviour is so strange and >> > irregular, that I don’t know if I can reproduce it in a simpler >> > environment... I suspect my combined use of postponing, makeups, layers >> > and \offset might have grown side effects since May. >> > >> > Any ideas? >> afaik nothing fundamental changed in these areas (ok, maybe you operate >> out of the formal functionality) ... of course, if you're using lmtx it >> might be that something got fixed in there, as at that moment it was >> more experimental than it is now >> >> Hans >> >> ----------------------------------------------------------------- >> Hans Hagen | PRAGMA ADE >> Ridderstraat 27 | 8061 GH Hasselt | The Netherlands >> tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl >> ----------------------------------------------------------------- >> >> >> ------------------------------ >> >> Subject: Digest Footer >> >> >> ___________________________________________________________________________________ >> If your question is of interest to others as well, please add an entry to >> the Wiki! >> >> maillist : ntg-context@ntg.nl / >> http://www.ntg.nl/mailman/listinfo/ntg-context >> webpage : http://www.pragma-ade.nl / http://tex.aanhet.net >> archive : https://foundry.supelec.fr/projects/contextrev/ >> wiki : http://contextgarden.net >> >> ___________________________________________________________________________________ >> >> >> ------------------------------ >> >> End of ntg-context Digest, Vol 181, Issue 8 >> ******************************************* >> > > ___________________________________________________________________________________ > If your question is of interest to others as well, please add an entry to > the Wiki! > > maillist : ntg-context@ntg.nl / > http://www.ntg.nl/mailman/listinfo/ntg-context > webpage : http://www.pragma-ade.nl / http://context.aanhet.net > archive : https://bitbucket.org/phg/context-mirror/commits/ > wiki : http://contextgarden.net > > ___________________________________________________________________________________ > [-- Attachment #1.2: Type: text/html, Size: 22868 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 8+ messages in thread
[parent not found: <mailman.442.1562695595.1354.ntg-context@ntg.nl>]
* Re: Typesetting Markdown – Part 5: Interpolation [not found] <mailman.442.1562695595.1354.ntg-context@ntg.nl> @ 2019-07-09 19:22 ` Andres Conrado 0 siblings, 0 replies; 8+ messages in thread From: Andres Conrado @ 2019-07-09 19:22 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1.1: Type: text/plain, Size: 591 bytes --] Thank you. I still don't really understand why can't you have a "presentational" yaml file and a "content" yaml file (I do it like that... I have a "variables.yaml" file for content and a "settings.yaml" file for presentational stuff, and use a "template.context" file with all my mapped variables within the ConTeXt code, and compile everything using pandoc). But I guess you want to do it this way. Or maybe I'm not really understanding your process. It's quite interesting in any case, and I'm learning a lot. Thanks for sharing. Andrés Conrado Montoya http://chiquitico.org [-- Attachment #1.2: Type: text/html, Size: 1037 bytes --] [-- Attachment #2: Type: text/plain, Size: 493 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://context.aanhet.net archive : https://bitbucket.org/phg/context-mirror/commits/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2019-07-09 19:22 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2019-07-06 19:08 Typesetting Markdown – Part 5: Interpolation Thangalin
2019-07-07 14:17 ` Aditya Mahajan
2019-07-07 18:58 ` Thangalin
2019-07-07 19:17 ` Aditya Mahajan
2019-07-08 17:13 ` Thangalin
[not found] <mailman.406.1562572373.1354.ntg-context@ntg.nl>
2019-07-08 18:26 ` Andres Conrado
2019-07-09 18:06 ` Thangalin
[not found] <mailman.442.1562695595.1354.ntg-context@ntg.nl>
2019-07-09 19:22 ` Andres Conrado
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).