ntg-context - mailing list for ConTeXt users
 help / color / mirror / Atom feed
* lmtx update/t-vim (again)
       [not found] <mailman.0.1629453601.23792.ntg-context@ntg.nl>
@ 2021-08-22 22:10 ` Benjamin Buchmuller via ntg-context
  2021-08-22 22:21   ` Wolfgang Schuster via ntg-context
  2021-08-23  6:19   ` Hans Hagen via ntg-context
  2021-08-22 22:55 ` lmtx update Benjamin Buchmuller via ntg-context
  1 sibling, 2 replies; 9+ messages in thread
From: Benjamin Buchmuller via ntg-context @ 2021-08-22 22:10 UTC (permalink / raw)
  To: mailing list for ConTeXt users; +Cc: Benjamin Buchmuller

Hi,

Thanks for having had a look into the t-vim. 

At least the document compiles fine (I get a PDF), although multiple complaints from the lua end when I use "$" or "#" in my source, for example 

#!/usr/bin/bash 

etc. culminating in

Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing 'I}' or 'I$' or 'I\par'.

Seems as if LMTX tried to interpret something literally here …

Further, I get a lot of 

fonts           > beware: no fonts are loaded yet, using 'lm mono' in box
fonts           > checking > char i (U+00069) in font '' with id 0: missing
fonts           > checking > char n (U+0006E) in font '' with id 0: missing

warnings. Maybe some things need to be adjusted?

(Second mail with another error in LMTX follows.)

Cheers


Benjamin

> On Aug 20, 2021, at 12:00, ntg-context-request@ntg.nl wrote:
> 
> Hi,
> 
> Here are the highlights of todays update:
> 
> - somewhat more compact tuc files, not for all documents, but it can accumulate; also less memory used then; i could bring down an extreme 2000 page 5 column doc tuc file down to 5% -- it was 70 MB; for the luametatex manual it reducec the tuc more than 30%; hard to tell if there will be an associated performance hit, but i'm sure thomas will complain if that's the case
> 
> - more mp-tex-lua interfacing upgraded plus extra preliminary chapter for luametafun about extensions - for taco
> 
> - a slightly more compact cache files for fonts with many (pseudo) ligatures; hopefully no side effects (nothing that can't be fixed fast if noted); quite probably no performance hit and maybe even some room for optimization (not done yet)
> 
> - a split in the cache directory for luametatex so that we can more easilly experiment without interference (so, although the above works in mkiv it's not enabled there currently)
> 
> - some minor things (also in the process of splitting the codebase)
> 
> - no real changes in / additions to the luametatex binary (we're in cosmetics mode now)
> 
> Hans
> 
> -----------------------------------------------------------------
>                                          Hans Hagen | PRAGMA ADE
>              Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
>       tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
> -----------------------------------------------------------------

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: lmtx update/t-vim (again)
  2021-08-22 22:10 ` lmtx update/t-vim (again) Benjamin Buchmuller via ntg-context
@ 2021-08-22 22:21   ` Wolfgang Schuster via ntg-context
  2021-08-23  6:19   ` Hans Hagen via ntg-context
  1 sibling, 0 replies; 9+ messages in thread
From: Wolfgang Schuster via ntg-context @ 2021-08-22 22:21 UTC (permalink / raw)
  To: mailing list for ConTeXt users; +Cc: Wolfgang Schuster

Benjamin Buchmuller via ntg-context schrieb am 23.08.2021 um 00:10:
> Hi,
>
> Thanks for having had a look into the t-vim.
>
> At least the document compiles fine (I get a PDF), although multiple complaints from the lua end when I use "$" or "#" in my source, for example
>
> #!/usr/bin/bash
>
> etc. culminating in
>
> Sorry, but I'm not programmed to handle this case;
> I'll just pretend that you didn''t ask for it.
> If you're in the wrong mode, you might be able to
> return to the right one by typing 'I}' or 'I$' or 'I\par'.
>
> Seems as if LMTX tried to interpret something literally here …
>
> Further, I get a lot of
>
> fonts           > beware: no fonts are loaded yet, using 'lm mono' in box
> fonts           > checking > char i (U+00069) in font '' with id 0: missing
> fonts           > checking > char n (U+0006E) in font '' with id 0: missing
>
> warnings. Maybe some things need to be adjusted?
>
> (Second mail with another error in LMTX follows.)

Can you provide a minimal working (or in your case not working) example 
for the problem.

Wolfgang

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________

^ permalink raw reply	[flat|nested] 9+ messages in thread

* lmtx update
       [not found] <mailman.0.1629453601.23792.ntg-context@ntg.nl>
  2021-08-22 22:10 ` lmtx update/t-vim (again) Benjamin Buchmuller via ntg-context
@ 2021-08-22 22:55 ` Benjamin Buchmuller via ntg-context
  2021-08-23  6:21   ` Hans Hagen via ntg-context
  1 sibling, 1 reply; 9+ messages in thread
From: Benjamin Buchmuller via ntg-context @ 2021-08-22 22:55 UTC (permalink / raw)
  To: mailing list for ConTeXt users; +Cc: Benjamin Buchmuller

Hi,

Here is another thing which worked previously for me:

ConTeXt  ver: 2021.07.30 00:57 LMTX  fmt: 2021.8.8  int: english/english

Now:

ConTeXt  ver: 2021.08.22 11:54 LMTX  fmt: 2021.8.22  int: english/english

Error:

lua error:

	registered function call [396]: ...eXt/tex/texmf-context/tex/context/base/mkxl/anch-pos.lmt:1286: attempt to call a nil value (upvalue 'texgetparstate')
stack traceback:
	...eXt/tex/texmf-context/tex/context/base/mkxl/anch-pos.lmt:1286: in function <...eXt/tex/texmf-context/tex/context/base/mkxl/anch-pos.lmt:1262>
	(...tail calls...)	

129     	\NC \unit{0.88 angstrom}
130     	\NC \unit{2.02 angstrom}
131     	\NC \unit{2.03 angstrom}
132     	\NC \unit{1.90 angstrom}
133     	\NC \unit{4.99 angstrom} % rmsd #1/a:14-61 & backbone to #5/a:103-150 & backbone
134     	\NC \unit{1.88 angstrom}
135     	\NC \unit{5.20 angstrom} % rmsd #1/a:46-55 & backbone to #5/a:135-144 & backbone
136     	\NC \NR
137     	\HL
138     \stoptabulate

The difficulty here is that when I copy the "faulty" part (my table) to another document (including all relevant defs etc.) it just works fine. So, I think it must have to do something with the placement of the float on the page. 

Any hints what has changed?

Thanks!


Benjamin

> On Aug 20, 2021, at 12:00, ntg-context-request@ntg.nl wrote:
> 
> lmtx update

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: lmtx update/t-vim (again)
  2021-08-22 22:10 ` lmtx update/t-vim (again) Benjamin Buchmuller via ntg-context
  2021-08-22 22:21   ` Wolfgang Schuster via ntg-context
@ 2021-08-23  6:19   ` Hans Hagen via ntg-context
  2021-08-23 10:32     ` Benjamin Buchmuller via ntg-context
  1 sibling, 1 reply; 9+ messages in thread
From: Hans Hagen via ntg-context @ 2021-08-23  6:19 UTC (permalink / raw)
  To: mailing list for ConTeXt users; +Cc: Hans Hagen, Benjamin Buchmuller

On 8/23/2021 12:10 AM, Benjamin Buchmuller via ntg-context wrote:
> Hi,
> 
> Thanks for having had a look into the t-vim.
> 
> At least the document compiles fine (I get a PDF), although multiple complaints from the lua end when I use "$" or "#" in my source, for example
> 
> #!/usr/bin/bash
> 
> etc. culminating in
> 
> Sorry, but I'm not programmed to handle this case;
> I'll just pretend that you didn''t ask for it.
> If you're in the wrong mode, you might be able to
> return to the right one by typing 'I}' or 'I$' or 'I\par'.
> 
> Seems as if LMTX tried to interpret something literally here …
> 
> Further, I get a lot of
> 
> fonts           > beware: no fonts are loaded yet, using 'lm mono' in box
> fonts           > checking > char i (U+00069) in font '' with id 0: missing
> fonts           > checking > char n (U+0006E) in font '' with id 0: missing
> 
> warnings. Maybe some things need to be adjusted?
THis normally means that you have someting before the \starttext that 
gets typeset (here the word "in")

Hans

-----------------------------------------------------------------
                                           Hans Hagen | PRAGMA ADE
               Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
        tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: lmtx update
  2021-08-22 22:55 ` lmtx update Benjamin Buchmuller via ntg-context
@ 2021-08-23  6:21   ` Hans Hagen via ntg-context
  0 siblings, 0 replies; 9+ messages in thread
From: Hans Hagen via ntg-context @ 2021-08-23  6:21 UTC (permalink / raw)
  To: mailing list for ConTeXt users; +Cc: Hans Hagen, Benjamin Buchmuller

On 8/23/2021 12:55 AM, Benjamin Buchmuller via ntg-context wrote:
> Hi,
> 
> Here is another thing which worked previously for me:
> 
> ConTeXt  ver: 2021.07.30 00:57 LMTX  fmt: 2021.8.8  int: english/english
> 
> Now:
> 
> ConTeXt  ver: 2021.08.22 11:54 LMTX  fmt: 2021.8.22  int: english/english
> 
> Error:
> 
> lua error:
> 
> 	registered function call [396]: ...eXt/tex/texmf-context/tex/context/base/mkxl/anch-pos.lmt:1286: attempt to call a nil value (upvalue 'texgetparstate')
> stack traceback:
> 	...eXt/tex/texmf-context/tex/context/base/mkxl/anch-pos.lmt:1286: in function <...eXt/tex/texmf-context/tex/context/base/mkxl/anch-pos.lmt:1262>
> 	(...tail calls...)	
> 
> 129     	\NC \unit{0.88 angstrom}
> 130     	\NC \unit{2.02 angstrom}
> 131     	\NC \unit{2.03 angstrom}
> 132     	\NC \unit{1.90 angstrom}
> 133     	\NC \unit{4.99 angstrom} % rmsd #1/a:14-61 & backbone to #5/a:103-150 & backbone
> 134     	\NC \unit{1.88 angstrom}
> 135     	\NC \unit{5.20 angstrom} % rmsd #1/a:46-55 & backbone to #5/a:135-144 & backbone
> 136     	\NC \NR
> 137     	\HL
> 138     \stoptabulate
> 
> The difficulty here is that when I copy the "faulty" part (my table) to another document (including all relevant defs etc.) it just works fine. So, I think it must have to do something with the placement of the float on the page.
> 
> Any hints what has changed?
your luametatex binary seems older than in the lmtx distribution .. what 
platform?

-----------------------------------------------------------------
                                           Hans Hagen | PRAGMA ADE
               Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
        tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: lmtx update/t-vim (again)
  2021-08-23  6:19   ` Hans Hagen via ntg-context
@ 2021-08-23 10:32     ` Benjamin Buchmuller via ntg-context
  2021-08-23 17:42       ` Aditya Mahajan via ntg-context
  0 siblings, 1 reply; 9+ messages in thread
From: Benjamin Buchmuller via ntg-context @ 2021-08-23 10:32 UTC (permalink / raw)
  To: Hans Hagen; +Cc: Benjamin Buchmuller, mailing list for ConTeXt users

[-- Attachment #1: Type: text/plain, Size: 1477 bytes --]

This is the setup I have been using, but I'm unsure if the problem could be related to the other problem I had. (Not scaled to a MWE, but short enough.) I figured the issue by removing some of the lines.

\usemodule[vim]

\definetextbackground[codebkg]
	[
	frame=on, 
	framecolor=black,
	background=,
	location=paragraph,
	]

\definevimtyping[vimR]
	[
	syntax=r,
	space=off,
	lines=split,
	numbering=yes,
	numberstep=5,
	alternative=pscolor,
	margin=.5em,
	style={\switchtobodyfont[type,small]\setupinterlinespace},
	before={\blank[white,small]\startcodebkg},  % a bit of extra space 
	after={\stopcodebkg},
	directory=vimout/,  % note: you must create this folder yourself!
	]

\starttext

\startvimR
#!/usr/bin/env R
included_aa <- list(
  `6d1t` = 2:81,
  `6cnq` = 146:225,
  `6ccg` = 2:81,
  `4lg7` = 76:167,
  `3c2i` = 90:181) %>% enframe() %>% unnest(cols = "value") %>% 
  rename(protein = "name", aa_pos = "value") %>%
  mutate(chain = "A") %>% mutate(include_aa = TRUE)
\stopvimR

\stoptext

So, the first "i", "n" etc. come from "include_aa" after I remove the shebang statement. 

The lines with "#" and "$" (in other pieces not shown) cause the complaints.

I also realized that I get output for each vim block, but instead of a "vimout", I get a "pdf" (error) and a "log" (some attached) now.

Also, the blocks get recompiled with each run even if their content doesn't change which was the previous behavior.



[-- Attachment #2: xxx-temp-vimR-0-error.log --]
[-- Type: application/octet-stream, Size: 524 bytes --]

return {
 ["errortype"]=0,
 ["filename"]="vimout/mbd_scaffold-temp-vimR-0.tmp",
 ["lastcontext"]="\n<line 3.1> #\n    !/usr/bin/env R",
 ["lastluaerror"]="",
 ["lasttexerror"]="You can't use 'parameter character #' in vertical mode",
 ["lasttexhelp"]="Sorry, but I'm not programmed to handle this case;\nI'll just pretend that you didn''t ask for it.\nIf you're in the wrong mode, you might be able to\nreturn to the right one by typing 'I}' or 'I$' or 'I\\par'.",
 ["linenumber"]=1,
 ["offset"]=10,
 ["skiplinenumber"]=0,
}

[-- Attachment #3: xxx-temp-vimR-0.log --]
[-- Type: application/octet-stream, Size: 1599 bytes --]

system          > 
system          > ConTeXt  ver: 2021.08.22 11:54 LMTX  fmt: 2021.8.22  int: english/english
system          > 
system          > 'cont-new.mkxl' loaded
open source     > level 1, order 1, name '/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl'
system          > beware: some patches loaded from cont-new.mkiv
close source    > level 1, order 1, name '/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl'
system          > files > jobname 'vimout/mbd_scaffold-temp-vimR-0', input 'vimout/mbd_scaffold-temp-vimR-0.tmp', result 'vimout/mbd_scaffold-temp-vimR-0'
fonts           > latin modern fonts are not preloaded
languages       > language 'en' is active
open source     > level 1, order 2, name 'vimout/mbd_scaffold-temp-vimR-0.tmp'
tex error       > tex error on line 1 in file vimout/mbd_scaffold-temp-vimR-0.tmp: You can't use 'parameter character #' in vertical mode

<line 3.1> #
    !/usr/bin/env R
 1 >>  #!/usr/bin/env R
 2     library(tidyverse)
 3     
 4     read_csa <- function(file) {
 5     
 6       readr::read_tsv(file) %>%
 7         tidyr::pivot_longer(-1) %>%
 8         magrittr::set_colnames(c("target", "buried_by", "value")) %>%
 9         dplyr::mutate(
10           tar = stringr::str_extract(target, "^.+(?=/.+/)"),
11           tar_chain = stringr::str_extract(target, "(?<=/)[A-Z]+(?=/)"),
Sorry, but I'm not programmed to handle this case;
I'll just pretend that you didn''t ask for it.
If you're in the wrong mode, you might be able to
return to the right one by typing 'I}' or 'I$' or 'I\par'.

[-- Attachment #4: xxx-temp-vimR-1.log --]
[-- Type: application/octet-stream, Size: 13244 bytes --]

system          > 
system          > ConTeXt  ver: 2021.08.22 11:54 LMTX  fmt: 2021.8.22  int: english/english
system          > 
system          > 'cont-new.mkxl' loaded
open source     > level 1, order 1, name '/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl'
system          > beware: some patches loaded from cont-new.mkiv
close source    > level 1, order 1, name '/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl'
system          > files > jobname 'vimout/mbd_scaffold-temp-vimR-1', input 'vimout/mbd_scaffold-temp-vimR-1.tmp', result 'vimout/mbd_scaffold-temp-vimR-1'
fonts           > latin modern fonts are not preloaded
languages       > language 'en' is active
open source     > level 1, order 2, name 'vimout/mbd_scaffold-temp-vimR-1.tmp'
close source    > level 1, order 2, name 'vimout/mbd_scaffold-temp-vimR-1.tmp'
system          > invalid \starttext ... \stoptext structure
fonts           > beware: no fonts are loaded yet, using 'lm mono' in box
fonts           > checking > char i (U+00069) in font '' with id 0: missing
fonts           > checking > char n (U+0006E) in font '' with id 0: missing
fonts           > checking > char c (U+00063) in font '' with id 0: missing
fonts           > checking > char l (U+0006C) in font '' with id 0: missing
fonts           > checking > char u (U+00075) in font '' with id 0: missing
fonts           > checking > char d (U+00064) in font '' with id 0: missing
fonts           > checking > char e (U+00065) in font '' with id 0: missing
fonts           > checking > char _ (U+0005F) in font '' with id 0: missing
fonts           > checking > char a (U+00061) in font '' with id 0: missing
fonts           > checking > char < (U+0003C) in font '' with id 0: missing
fonts           > checking > char - (U+0002D) in font '' with id 0: missing
fonts           > checking > char s (U+00073) in font '' with id 0: missing
fonts           > checking > char t (U+00074) in font '' with id 0: missing
fonts           > checking > char ( (U+00028) in font '' with id 0: missing
fonts           > checking > char ` (U+00060) in font '' with id 0: missing
fonts           > checking > char 6 (U+00036) in font '' with id 0: missing
fonts           > checking > char 1 (U+00031) in font '' with id 0: missing
fonts           > checking > char = (U+0003D) in font '' with id 0: missing
fonts           > checking > char 2 (U+00032) in font '' with id 0: missing
fonts           > checking > char : (U+0003A) in font '' with id 0: missing
fonts           > checking > char 8 (U+00038) in font '' with id 0: missing
fonts           > checking > char , (U+0002C) in font '' with id 0: missing
fonts           > checking > char q (U+00071) in font '' with id 0: missing
fonts           > checking > char 4 (U+00034) in font '' with id 0: missing
fonts           > checking > char 5 (U+00035) in font '' with id 0: missing
fonts           > checking > char g (U+00067) in font '' with id 0: missing
fonts           > checking > char 7 (U+00037) in font '' with id 0: missing
fonts           > checking > char 3 (U+00033) in font '' with id 0: missing
fonts           > checking > char 9 (U+00039) in font '' with id 0: missing
fonts           > checking > char 0 (U+00030) in font '' with id 0: missing
fonts           > checking > char ) (U+00029) in font '' with id 0: missing
fonts           > checking > char r (U+00072) in font '' with id 0: missing
fonts           > checking > char m (U+0006D) in font '' with id 0: missing
fonts           > checking > char p (U+00070) in font '' with id 0: missing
fonts           > checking > char o (U+0006F) in font '' with id 0: missing
fonts           > checking > char " (U+00022) in font '' with id 0: missing
fonts           > checking > char v (U+00076) in font '' with id 0: missing
fonts           > checking > char h (U+00068) in font '' with id 0: missing
fonts           > checking > char A (U+00041) in font '' with id 0: missing
backend         > xmp > using file '/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkiv/lpdf-pdx.xml'
pages           > flushing realpage 1, userpage 1, subpage 1
system          > start used files
system          > text: mbd_scaffold-temp-vimR-1
system          > stop used files
system          > start used files
system          >    1: filename=publ-imp-default.lua filetype=lua foundname=/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkiv/publ-imp-default.lua fullname=/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkiv/publ-imp-default.lua usedmethod=database
system          >    2: filename=cont-new.mkxl filetype=tex foundname=/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl fullname=/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkxl/cont-new.mkxl usedmethod=database
system          >    3: filename=lang-exc.lua filetype=lua foundname=/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkiv/lang-exc.lua fullname=/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkiv/lang-exc.lua usedmethod=database
system          >    4: filename=lang-us.lua filetype=lua foundname=/Applications/ConTeXt/tex/texmf-context/tex/context/patterns/mkiv/lang-us.lua fullname=/Applications/ConTeXt/tex/texmf-context/tex/context/patterns/mkiv/lang-us.lua usedmethod=database
system          >    5: filename=vimout/mbd_scaffold-temp-vimR-1.tmp format=tex foundname=vimout/mbd_scaffold-temp-vimR-1.tmp fullname=/Users/benjamin/Documents/university/1712-2103-PhD/thesis-PhD/_sync/02_thesis/publication-thesis_P-v2/maintexts/vimout/mbd_scaffold-temp-vimR-1.tmp usedmethod=direct
system          >    6: filename=lmmono10-regular filetype=otf format=otf foundname=/Applications/ConTeXt/tex/texmf/fonts/opentype/public/lm/lmmono10-regular.otf fullname=/Applications/ConTeXt/tex/texmf/fonts/opentype/public/lm/lmmono10-regular.otf usedmethod=database
system          >    7: filename=lpdf-pdx.xml filetype=tex foundname=/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkiv/lpdf-pdx.xml fullname=/Applications/ConTeXt/tex/texmf-context/tex/context/base/mkiv/lpdf-pdx.xml usedmethod=database
system          > stop used files
system          > start commandline options
system          > currentrun="1"
system          > fulljobname="vimout/mbd_scaffold-temp-vimR-1.tmp"
system          > input="vimout/mbd_scaffold-temp-vimR-1.tmp"
system          > kindofrun="1"
system          > maxnofruns="9"
system          > texmfbinpath="/Applications/ConTeXt/tex/texmf-osx-64/bin"
system          > stop commandline options
system          > start commandline files
system          >    1: vimout/mbd_scaffold-temp-vimR-1.tmp
system          > stop commandline files
modules         > start used modules
modules         > stop used modules
system          > 
system          > status after finishing run
system          > 
system          >   -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
system          >           string       pool       hash     lookup       node      token     buffer      input       file       nest  parameter       save       font   language       mark     insert
system          >   -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
system          >   max    2097152  100000000    2097152    2097152   50000000   10000000  100000000     100000       2000      10000     100000     500000     100000      10000      10000        500
system          >   min     150000   10000000     150000     150000    1000000    1000000    1000000      10000        500       1000      20000     100000        250        250         50         10
system          >   set     500000   10000000     250000     250000   50000000   10000000   10000000     100000       2000      10000     100000     500000     100000        250        250        250
system          >   stp     100000    1000000     100000     100000     500000     250000    1000000      10000        250       1000      10000      10000        250        250         50         25
system          > 
system          >   mem     150000     840622     150000               1000000    1000000    1000000      10000        500       1000      20000      10000      46440         96       1200        240
system          >   all    3600000     840622    2400000               9000000    8000000    1000000     320000      16000      48000      80000     160000      46440         96      28800       5760
system          > 
system          >   ini    2141682     840331          0      44513          0     489954                                                                                       0                      
system          >   ptr      44554                  8606      44537                489941          0          0          0          0          0          0          1          0          0          7
system          >   top      44555                740037     131074       4574     490748        141         37          4         12         36        406        250        250         50         10
system          >   -----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
system          > 
system          >   current input type    : initial
system          > 
system          >   approximate memory    : 27242854 (25 MB)
system          > 
system          >   expansion depth       : min: 10000, max: 1000000, set: 10000, top: 7
system          > 
system          >   luabytecode registers : 997
system          >   luabytecode bytes     : 15968 (0 MB)
system          >   luastate bytes now    : 36129040 (34 MB)
system          >   luastate bytes max    : 36590329 (34 MB)
system          > 
system          >   file callbacks        : 63
system          >   saved callbacks       : 422
system          >   direct callbacks      : 2
system          >   function callbacks    : 187
system          >   value callbacks       : 1
system          >   message callbacks     : 0
system          >   bytecode callbacks    : 597
system          > 
system          >   mp instances          : 0
system          >   mp estimated memory   : 0 (0 MB)
system          >   mp file callbacks     : 0
system          >   mp text callbacks     : 0
system          >   mp script callbacks   : 0
system          >   mp log callbacks      : 0
system          > 
system          >   total callbacks       : 1272
system          >   mp total callbacks    : 0
system          >   backend callbacks     : 0
system          > 
mkiv lua stats  > used config file: selfautoparent:/texmf/web2c/texmfcnf.lua
mkiv lua stats  > used cache path: /Applications/ConTeXt/tex/texmf-cache/luametatex-cache/context/5fe67e0bfe781ce0dde776fb1556f32e
mkiv lua stats  > resource resolver: loadtime 0.006 seconds, 0 scans with scantime 0.000 seconds, 0 shared scans, 7 found files, scanned paths: <none>
mkiv lua stats  > stored bytecode data: 497 modules (0.255 sec), 100 tables (0.012 sec), 597 chunks (0.267 sec)
mkiv lua stats  > traced context: maxstack: 1591, freed: 0, unreachable: 1591
mkiv lua stats  > cleaned up reserved nodes: 69 nodes, 9 lists of 434
mkiv lua stats  > node memory usage: 6 attribute, 3 attribute_list, 1 glue, 58 glue_spec, 3 kern, 2 penalty, 2 temp
mkiv lua stats  > node list callback tasks: 9 unique task lists, 8 instances (re)created, 46 calls
mkiv lua stats  > used backend: pdf (backend for directly generating pdf output)
mkiv lua stats  > jobdata time: 0.001 seconds saving, 0.000 seconds loading
mkiv lua stats  > callbacks: file: 63, saved: 422, direct: 2, function: 187, value: 1, message: 0, bytecode: 597, late 0, total: 1272 (1272 per page)
mkiv lua stats  > randomizer: resumed with value 0.82560840936925
mkiv lua stats  > loaded patterns: en::1, load time: 0.000
mkiv lua stats  > loaded fonts: 1 files: lmmono10-regular.otf
mkiv lua stats  > font engine: otf 3.119, afm 1.513, tfm 1.000, 1 instances, load time 0.010 seconds 
mkiv lua stats  > font embedding time: 0.001 seconds, 1 fonts
mkiv lua stats  > result saved in file: vimout/mbd_scaffold-temp-vimR-1.pdf, compresslevel 1, objectcompresslevel 3
mkiv lua stats  > positions: 4 collected, 0 deltas, 0 shared partials, 0 partial entries
mkiv lua stats  > used platform: osx-64, type: unix, binary subtree: texmf-osx-64
mkiv lua stats  > used engine: luametatex version: 2.0918, functionality level: 20210804, format id: 589, compiler: clang
mkiv lua stats  > tex properties: 740037 hash slots used of 2097152, 44537 control sequences, approximate memory usage: 25 MB
mkiv lua stats  > lua properties: engine: lua 5.4, used memory: 36 MB, ctx: 34 MB, max: 34 MB, symbol mask: utf (τεχ)
mkiv lua stats  > runtime: 0.340 seconds, 1 processed pages, 1 shipped pages, 2.939 pages/second

[-- Attachment #5: Type: text/plain, Size: 1473 bytes --]



> On Aug 23, 2021, at 08:19, Hans Hagen <j.hagen@xs4all.nl> wrote:
> 
> On 8/23/2021 12:10 AM, Benjamin Buchmuller via ntg-context wrote:
>> Hi,
>> Thanks for having had a look into the t-vim.
>> At least the document compiles fine (I get a PDF), although multiple complaints from the lua end when I use "$" or "#" in my source, for example
>> #!/usr/bin/bash
>> etc. culminating in
>> Sorry, but I'm not programmed to handle this case;
>> I'll just pretend that you didn''t ask for it.
>> If you're in the wrong mode, you might be able to
>> return to the right one by typing 'I}' or 'I$' or 'I\par'.
>> Seems as if LMTX tried to interpret something literally here …
>> Further, I get a lot of
>> fonts           > beware: no fonts are loaded yet, using 'lm mono' in box
>> fonts           > checking > char i (U+00069) in font '' with id 0: missing
>> fonts           > checking > char n (U+0006E) in font '' with id 0: missing
>> warnings. Maybe some things need to be adjusted?
> THis normally means that you have someting before the \starttext that gets typeset (here the word "in")
> 
> Hans
> 
> -----------------------------------------------------------------
>                                          Hans Hagen | PRAGMA ADE
>              Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
>       tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
> -----------------------------------------------------------------


[-- Attachment #6: Type: text/plain, Size: 493 bytes --]

___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: lmtx update/t-vim (again)
  2021-08-23 10:32     ` Benjamin Buchmuller via ntg-context
@ 2021-08-23 17:42       ` Aditya Mahajan via ntg-context
  2021-08-23 17:45         ` Hans Hagen via ntg-context
  2021-08-25  2:45         ` Aditya Mahajan via ntg-context
  0 siblings, 2 replies; 9+ messages in thread
From: Aditya Mahajan via ntg-context @ 2021-08-23 17:42 UTC (permalink / raw)
  To: Benjamin Buchmuller via ntg-context; +Cc: Aditya Mahajan, Benjamin Buchmuller

On Mon, 23 Aug 2021, Benjamin Buchmuller via ntg-context wrote:

> This is the setup I have been using, but I'm unsure if the problem could be related to the other problem I had. (Not scaled to a MWE, but short enough.) I figured the issue by removing some of the lines.

I get the same error. Most likely due to some grouping issue because there is also this:

system          > invalid \starttext ... \stoptext structure

I'll look into it.

Aditya
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: lmtx update/t-vim (again)
  2021-08-23 17:42       ` Aditya Mahajan via ntg-context
@ 2021-08-23 17:45         ` Hans Hagen via ntg-context
  2021-08-25  2:45         ` Aditya Mahajan via ntg-context
  1 sibling, 0 replies; 9+ messages in thread
From: Hans Hagen via ntg-context @ 2021-08-23 17:45 UTC (permalink / raw)
  To: Aditya Mahajan, Benjamin Buchmuller via ntg-context
  Cc: Hans Hagen, Benjamin Buchmuller

On 8/23/2021 7:42 PM, Aditya Mahajan wrote:
> On Mon, 23 Aug 2021, Benjamin Buchmuller via ntg-context wrote:
> 
>> This is the setup I have been using, but I'm unsure if the problem could be related to the other problem I had. (Not scaled to a MWE, but short enough.) I figured the issue by removing some of the lines.
> 
> I get the same error. Most likely due to some grouping issue because there is also this:
> 
> system          > invalid \starttext ... \stoptext structure
> 
> I'll look into it.
Hopefully I didn't mess up something.

Hans

-----------------------------------------------------------------
                                           Hans Hagen | PRAGMA ADE
               Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
        tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________

^ permalink raw reply	[flat|nested] 9+ messages in thread

* Re: lmtx update/t-vim (again)
  2021-08-23 17:42       ` Aditya Mahajan via ntg-context
  2021-08-23 17:45         ` Hans Hagen via ntg-context
@ 2021-08-25  2:45         ` Aditya Mahajan via ntg-context
  1 sibling, 0 replies; 9+ messages in thread
From: Aditya Mahajan via ntg-context @ 2021-08-25  2:45 UTC (permalink / raw)
  To: Aditya Mahajan via ntg-context; +Cc: Aditya Mahajan, Benjamin Buchmuller

On Mon, 23 Aug 2021, Aditya Mahajan via ntg-context wrote:

> On Mon, 23 Aug 2021, Benjamin Buchmuller via ntg-context wrote:
> 
> > This is the setup I have been using, but I'm unsure if the problem could be related to the other problem I had. (Not scaled to a MWE, but short enough.) I figured the issue by removing some of the lines.
> 
> I get the same error. Most likely due to some grouping issue because there is also this:
> 
> system          > invalid \starttext ... \stoptext structure
> 
> I'll look into it.

The error was due to the change in job.files.run macro. I have adapted the t-filter module to use the new interface. So, the error should go away if you update your installed modules.

Thanks for the bug report.

Aditya
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!

maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage  : http://www.pragma-ade.nl / http://context.aanhet.net
archive  : https://bitbucket.org/phg/context-mirror/commits/
wiki     : http://contextgarden.net
___________________________________________________________________________________

^ permalink raw reply	[flat|nested] 9+ messages in thread

end of thread, other threads:[~2021-08-25  2:45 UTC | newest]

Thread overview: 9+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
     [not found] <mailman.0.1629453601.23792.ntg-context@ntg.nl>
2021-08-22 22:10 ` lmtx update/t-vim (again) Benjamin Buchmuller via ntg-context
2021-08-22 22:21   ` Wolfgang Schuster via ntg-context
2021-08-23  6:19   ` Hans Hagen via ntg-context
2021-08-23 10:32     ` Benjamin Buchmuller via ntg-context
2021-08-23 17:42       ` Aditya Mahajan via ntg-context
2021-08-23 17:45         ` Hans Hagen via ntg-context
2021-08-25  2:45         ` Aditya Mahajan via ntg-context
2021-08-22 22:55 ` lmtx update Benjamin Buchmuller via ntg-context
2021-08-23  6:21   ` Hans Hagen via ntg-context

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).