* Temporary landscape @ 2010-10-13 13:22 Procházka Lukáš Ing. - Pontex s. r. o. 2010-10-13 13:50 ` Hans Hagen 0 siblings, 1 reply; 4+ messages in thread From: Procházka Lukáš Ing. - Pontex s. r. o. @ 2010-10-13 13:22 UTC (permalink / raw) To: ConTeXt [-- Attachment #1: Type: text/plain, Size: 1288 bytes --] Hello, I need to typeset contents of a wide file. This works: --- \starttext \setuppapersize[A4,landscape][A4,landscape] \typefile[Dim]{Cha-MMax-iDL.txt} \page % RESTORE ORIGINAL PAGE SETTINGS AAA \stoptext --- And I'd like to find out how to restore previous page settings. I guess I could call something like "\setuppapersize[A4][A4]" at the place of "RESTORE ORIGINAL PAGE SETTINGS", but I'd rather something independent (now I'd have to suppose that previous page is of A4 format). I'm thinking about like enclosing the \setuppapersize[A4,landscape][A4,landscape] \typefile[Dim]{../../Statics/Dim/Res/Cha-MMax-iDL.txt} into an environment or something. Maybe something like \setupenvironment[MyEnv][...] in the preamble and later \startenvironment[MyEnv] \setuppapersize[A4,landscape][A4,landscape] \typefile[Dim]{../../Statics/Dim/Res/Cha-MMax-iDL.txt} \stopenvironment Is there something like that? (Wiki: http://wiki.contextgarden.net/Reference/en/startenvironment is a bit empty.) Lukas -- Ing. Lukáš Procházka [mailto:LPr@pontex.cz] Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz] Bezová 1658 147 14 Praha 4 Tel: +420 244 062 238 Fax: +420 244 461 038 [-- Attachment #2: Cha-MMax-iDL.txt --] [-- Type: text/plain, Size: 3915 bytes --] ;---------------------------------------------------------------------------------------------+ ; Ponton (R) "B" - Beam v1.3d/2010-10-13, (C) 2002-2010 Ing. Lukas Prochazka, Pontex s. r. o. | ;---------------------------------------------------------------------------------------------+ ; ; Sec.Name P. LC.Name Cat. N Mx.Cen My.Cen Con.A Con.Sig- C.Sg-.Per Re.A Ar/A Re.Sig+ R.Sg+.Per M. Flags Use ;----------------------------------------------------------------------------------------------------------------------------------------------- 0000.000 1 Cha-MMax 1 0 0 0 8.947 0 -18.000 0 0.000% 0 400.000 1 0000 ? 0000.325 1 Cha-MMax 1 -0.0003 0.0159 0 8.947 -0.060590 -18.000 0.051472 0.575% 3.239 400.000 1 .... 0.810% 0000.650 1 Cha-MMax 1 -0.0005 0.0636 0 8.947 -0.242535 -18.000 0.051472 0.575% 13.000 400.000 1 .... 3.25% 0001.350 1 Cha-MMax 1 0.0231 -2.081 0 8.947 -3.911 -18.000 0.051472 0.575% 66.217 400.000 1 .... 21.7% 0002.050 1 Cha-MMax 1 0.0086 -4.221 0 8.947 -7.934 -18.000 0.051472 0.575% 133.961 400.000 1 .... 44.1% 0002.750 1 Cha-MMax 1 0.0080 -5.799 0 8.947 -10.899 -18.000 0.051472 0.575% 183.979 400.000 1 .... 60.6% 0003.450 1 Cha-MMax 1 0.0074 -7.376 0 8.947 -13.864 -18.000 0.051472 0.575% 233.997 400.000 1 .... 77.0% 0004.150 1 Cha-MMax 1 0.0069 -8.358 0 8.947 -15.709 -18.000 0.051472 0.575% 265.119 400.000 1 .... 87.3% 0004.850 1 Cha-MMax 1 0.0063 -9.339 0 8.947 -17.554 -18.000 0.051472 0.575% 296.241 400.000 1 .... 97.5% 0005.550 1 Cha-MMax 1 0.0057 -9.638 0 8.947 -18.115 -18.000 0.051472 0.575% 305.712 400.000 1 .C.. 100.6% 0006.250 1 Cha-MMax 1 0.0051 -9.937 0 8.947 -18.677 -18.000 0.051472 0.575% 315.183 400.000 1 .C.. 103.8% 0006.950 1 Cha-MMax 1 0.0046 -9.616 0 8.947 -18.074 -18.000 0.051472 0.575% 305.003 400.000 1 .C.. 100.4% 0007.650 1 Cha-MMax 1 0.0040 -9.295 0 8.947 -17.471 -18.000 0.051472 0.575% 294.823 400.000 1 .... 97.1% 0008.350 1 Cha-MMax 1 0.0034 -8.368 0 8.947 -15.729 -18.000 0.051472 0.575% 265.420 400.000 1 .... 87.4% 0009.050 1 Cha-MMax 1 0.0028 -7.441 0 8.947 -13.986 -18.000 0.051472 0.575% 236.017 400.000 1 .... 77.7% 0009.750 1 Cha-MMax 1 0.0023 -5.861 0 8.947 -11.017 -18.000 0.051472 0.575% 185.903 400.000 1 .... 61.2% 0010.450 1 Cha-MMax 1 0.0017 -4.281 0 8.947 -8.047 -18.000 0.051472 0.575% 135.788 400.000 1 .... 44.7% 0011.150 1 Cha-MMax 1 0.0011 -2.109 0 8.947 -3.964 -18.000 0.051472 0.575% 66.888 400.000 1 .... 22.0% 0011.850 1 Cha-MMax 1 0.0005 0.0636 0 8.947 -0.243019 -18.000 0.051472 0.575% 13.089 400.000 1 .... 3.27% 0012.175 1 Cha-MMax 1 0.0003 0.0159 0 8.947 -0.060832 -18.000 0.051472 0.575% 3.283 400.000 1 .... 0.821% 0012.500 1 Cha-MMax 1 0 0 0 8.947 0 -18.000 0 0.000% 0 400.000 1 0000 ? ;----------------------------------------------------------------------------------------------------------------------------------------------- ; 1 Cha-MMax ? ? ? ? ? -18.677 ? ? ? 315.183 ? 0 .... 103.8% [-- Attachment #3: Type: text/plain, Size: 486 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Temporary landscape 2010-10-13 13:22 Temporary landscape Procházka Lukáš Ing. - Pontex s. r. o. @ 2010-10-13 13:50 ` Hans Hagen 2010-10-13 14:03 ` Aditya Mahajan 0 siblings, 1 reply; 4+ messages in thread From: Hans Hagen @ 2010-10-13 13:50 UTC (permalink / raw) To: mailing list for ConTeXt users On 13-10-2010 3:22, Procházka Lukáš Ing. - Pontex s. r. o. wrote: > Hello, > > I need to typeset contents of a wide file. This works: > > --- > \starttext > > \setuppapersize[A4,landscape][A4,landscape] > \typefile[Dim]{Cha-MMax-iDL.txt} > > \page > > % RESTORE ORIGINAL PAGE SETTINGS > > AAA > > \stoptext You can wikify this: \setuplayout [location=middle] \showframe \def\PushPaperSize {\edef\PopPaperSize{\setuppapersize[\papersize][\printpapersize]}} \starttext \setuppapersize[A4][A3] test \page \PushPaperSize \setuppapersize[A4,landscape][A3,landscape] test \page \PopPaperSize test \page \stoptext ----------------------------------------------------------------- Hans Hagen | PRAGMA ADE Ridderstraat 27 | 8061 GH Hasselt | The Netherlands tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com | www.pragma-pod.nl ----------------------------------------------------------------- ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Temporary landscape 2010-10-13 13:50 ` Hans Hagen @ 2010-10-13 14:03 ` Aditya Mahajan 2010-10-13 15:12 ` Procházka Lukáš Ing. - Pontex s. r. o. 0 siblings, 1 reply; 4+ messages in thread From: Aditya Mahajan @ 2010-10-13 14:03 UTC (permalink / raw) To: mailing list for ConTeXt users [-- Attachment #1: Type: TEXT/PLAIN, Size: 2535 bytes --] On Wed, 13 Oct 2010, Hans Hagen wrote: > On 13-10-2010 3:22, Procházka Lukáš Ing. - Pontex s. r. o. wrote: >> Hello, >> >> I need to typeset contents of a wide file. This works: >> >> --- >> \starttext >> >> \setuppapersize[A4,landscape][A4,landscape] >> \typefile[Dim]{Cha-MMax-iDL.txt} >> >> \page >> >> % RESTORE ORIGINAL PAGE SETTINGS >> >> AAA >> >> \stoptext > > You can wikify this: > > \setuplayout > [location=middle] > > \showframe > > \def\PushPaperSize > {\edef\PopPaperSize{\setuppapersize[\papersize][\printpapersize]}} > > \starttext > \setuppapersize[A4][A3] > test \page > \PushPaperSize > \setuppapersize[A4,landscape][A3,landscape] > test \page > \PopPaperSize > test \page > \stoptext From my to be completed TUGboat article: \section {Changing paper size within a document} To get one page (containing a table or a figure) in landscape mode, you can use \type{\adaptpapersize}. For example, \starttyping \definepapersize[main] [A4] [A4] \definepapersize[extra][A4,landscape] [A4,landscape] \setuppapersize[main] \starttext Page 1. Potrait \page Page 2. Potrait \page \adaptpapersize[extra] Page 3. Landscape \page Page 4. Potrait \page \stoptext \stoptyping If you have a full page figure that you want to include in a landscape paper, you can combine \type{\adaptpapersize} with \CONTEXT's postponing mechanism. \starttyping \startpostponing \adaptpapersize[extra] \placefigure [here] [fig:reference] {The caption of the figure} {\extrenalgraphics[full-page-figure]} \page \stoppostponing \stoptyping The \type{postponing} environment postpones the figure until the next page. When the new page starts, \type{\adaptpapersize} changes to landscape mode. The \type{\page} is the end is to make sure even if some place is remaining on the page, we do not get any text there. To get more than one page in landscape, you can reuse \type{\setuppapersize}. For example, \starttyping \definepapersize[main] [A4] [A4] \definepapersize[extra][A4,landscape] [A4,landscape] \setuppapersize[main] \starttext Page 1. Potrait \page Page 2. Potrait \page \setuppapersize[extra] Page 3. Landscape \page Page 4. Landscape \page \setuppapersize[main] Page 5. Potrait \page Page 6. Potrait \page \stoptext \stoptyping Aditya [-- Attachment #2: Type: text/plain, Size: 486 bytes --] ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Temporary landscape 2010-10-13 14:03 ` Aditya Mahajan @ 2010-10-13 15:12 ` Procházka Lukáš Ing. - Pontex s. r. o. 0 siblings, 0 replies; 4+ messages in thread From: Procházka Lukáš Ing. - Pontex s. r. o. @ 2010-10-13 15:12 UTC (permalink / raw) To: mailing list for ConTeXt users Thank you both for the suggestions. My final code looks like this: --- \def\PushPaperSize{\edef\PopPaperSize{\setuppapersize[\papersize][\printpapersize]}} \definehead[subjectLand][subject] \setuphead[subjectLand][before={\PushPaperSize\page},style=bold] \setuptyping[Dim][bodyfont=small,style={\ttx\setupinterlinespace}] \starttext \def\T#1#2{ \subjectLand{#1} \setuppapersize[A4,landscape][A4,landscape] \typefile[Dim]{../../Statics/Dim/Res/#2.txt} \typefile[Dim]{../../Statics/Dim/Res/#2.txt} % Just to test (=> more than one page) \typefile[Dim]{../../Statics/Dim/Res/#2.txt} % Just to test (=> more than one page) \page \PopPaperSize } \T{A}{ULS-MMax-iDL} \T{B}{ULS-MMax-iDL} \T{C}{ULS-MMax-iDL} \T{D}{ULS-MMax-iDL} AAA \stoptext --- I'd have one more question about page layout - let's have the following code: --- \showframe \starttext AAA \page \setuppapersize[A4,landscape][A4,landscape] BBB \page \setuppapersize[A4,landscape][A4,landscape] \setuplayout[topspace=3in] % How to change text height to keep the bottom print range? CCC \stoptext --- In this example, I changed the topsize by 2in, i.e. 3in (new value) - 1in (default = previous value). And I want to shorten the textheight by the same difference, i.e. by 2in (i.e. to keep the bottom range of print space). I know that I can set textheight directly - but I don't want to do so, I want this value to be computed from the change of the topsize. Is it possible somehow? Moreover, would it be possible by Lua code? Something like this (pseudo)code: --- \startluacode local ts, th = context.topspace, context.textheight local dif = 72 -- 72bp = 1in -- Or to call a conversion routine, e.g. in2bp(1), if it exists? ts = ts + dif th = th - dif context(string.format("\\setuplayout[topspace=%i,textheight=%i]", ts, th)) -- or: context.setuplayout{topspace=ts, textheight=th} \stopluacode --- Best regards, Lukas On Wed, 13 Oct 2010 16:03:33 +0200, Aditya Mahajan <adityam@umich.edu> wrote: > On Wed, 13 Oct 2010, Hans Hagen wrote: > >> On 13-10-2010 3:22, Procházka Lukáš Ing. - Pontex s. r. o. wrote: >>> Hello, >>> >>> I need to typeset contents of a wide file. This works: >>> >>> --- >>> \starttext >>> >>> \setuppapersize[A4,landscape][A4,landscape] >>> \typefile[Dim]{Cha-MMax-iDL.txt} >>> >>> \page >>> >>> % RESTORE ORIGINAL PAGE SETTINGS >>> >>> AAA >>> >>> \stoptext >> >> You can wikify this: >> >> \setuplayout >> [location=middle] >> >> \showframe >> >> \def\PushPaperSize >> {\edef\PopPaperSize{\setuppapersize[\papersize][\printpapersize]}} >> >> \starttext >> \setuppapersize[A4][A3] >> test \page >> \PushPaperSize >> \setuppapersize[A4,landscape][A3,landscape] >> test \page >> \PopPaperSize >> test \page >> \stoptext > > From my to be completed TUGboat article: > > \section {Changing paper size within a document} > > To get one page (containing a table or a figure) in landscape > mode, you can use \type{\adaptpapersize}. For example, > > \starttyping > \definepapersize[main] [A4] [A4] > \definepapersize[extra][A4,landscape] > [A4,landscape] > > \setuppapersize[main] > \starttext > Page 1. Potrait \page > Page 2. Potrait \page > \adaptpapersize[extra] > Page 3. Landscape \page > Page 4. Potrait \page > \stoptext > \stoptyping > > If you have a full page figure that you want to include in a landscape > paper, you can combine \type{\adaptpapersize} with \CONTEXT's postponing > mechanism. > > \starttyping > \startpostponing > \adaptpapersize[extra] > \placefigure > [here] > [fig:reference] > {The caption of the figure} > {\extrenalgraphics[full-page-figure]} > \page > \stoppostponing > \stoptyping > > The \type{postponing} environment postpones the figure until the next > page. When the new page starts, \type{\adaptpapersize} changes to > landscape mode. The \type{\page} is the end is to make sure even if some > place is remaining on the page, we do not get any text there. > > To get more than one page in landscape, you can reuse > \type{\setuppapersize}. > For example, > > \starttyping > \definepapersize[main] [A4] [A4] > \definepapersize[extra][A4,landscape] > [A4,landscape] > > \setuppapersize[main] > \starttext > Page 1. Potrait \page > Page 2. Potrait \page > \setuppapersize[extra] > Page 3. Landscape \page > Page 4. Landscape \page > \setuppapersize[main] > Page 5. Potrait \page > Page 6. Potrait \page > \stoptext > \stoptyping > > > Aditya ___________________________________________________________________________________ If your question is of interest to others as well, please add an entry to the Wiki! maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context webpage : http://www.pragma-ade.nl / http://tex.aanhet.net archive : http://foundry.supelec.fr/projects/contextrev/ wiki : http://contextgarden.net ___________________________________________________________________________________ ^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-10-13 15:12 UTC | newest] Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed) -- links below jump to the message on this page -- 2010-10-13 13:22 Temporary landscape Procházka Lukáš Ing. - Pontex s. r. o. 2010-10-13 13:50 ` Hans Hagen 2010-10-13 14:03 ` Aditya Mahajan 2010-10-13 15:12 ` Procházka Lukáš Ing. - Pontex s. r. o.
This is a public inbox, see mirroring instructions for how to clone and mirror all data and code used for this inbox; as well as URLs for NNTP newsgroup(s).