* Temporary landscape
@ 2010-10-13 13:22 Procházka Lukáš Ing. - Pontex s. r. o.
2010-10-13 13:50 ` Hans Hagen
0 siblings, 1 reply; 4+ messages in thread
From: Procházka Lukáš Ing. - Pontex s. r. o. @ 2010-10-13 13:22 UTC (permalink / raw)
To: ConTeXt
[-- Attachment #1: Type: text/plain, Size: 1288 bytes --]
Hello,
I need to typeset contents of a wide file. This works:
---
\starttext
\setuppapersize[A4,landscape][A4,landscape]
\typefile[Dim]{Cha-MMax-iDL.txt}
\page
% RESTORE ORIGINAL PAGE SETTINGS
AAA
\stoptext
---
And I'd like to find out how to restore previous page settings.
I guess I could call something like "\setuppapersize[A4][A4]" at the place of "RESTORE ORIGINAL PAGE SETTINGS", but I'd rather something independent (now I'd have to suppose that previous page is of A4 format).
I'm thinking about like enclosing the
\setuppapersize[A4,landscape][A4,landscape]
\typefile[Dim]{../../Statics/Dim/Res/Cha-MMax-iDL.txt}
into an environment or something.
Maybe something like \setupenvironment[MyEnv][...] in the preamble and later
\startenvironment[MyEnv]
\setuppapersize[A4,landscape][A4,landscape]
\typefile[Dim]{../../Statics/Dim/Res/Cha-MMax-iDL.txt}
\stopenvironment
Is there something like that? (Wiki: http://wiki.contextgarden.net/Reference/en/startenvironment is a bit empty.)
Lukas
--
Ing. Lukáš Procházka [mailto:LPr@pontex.cz]
Pontex s. r. o. [mailto:pontex@pontex.cz] [http://www.pontex.cz]
Bezová 1658
147 14 Praha 4
Tel: +420 244 062 238
Fax: +420 244 461 038
[-- Attachment #2: Cha-MMax-iDL.txt --]
[-- Type: text/plain, Size: 3915 bytes --]
;---------------------------------------------------------------------------------------------+
; Ponton (R) "B" - Beam v1.3d/2010-10-13, (C) 2002-2010 Ing. Lukas Prochazka, Pontex s. r. o. |
;---------------------------------------------------------------------------------------------+
;
; Sec.Name P. LC.Name Cat. N Mx.Cen My.Cen Con.A Con.Sig- C.Sg-.Per Re.A Ar/A Re.Sig+ R.Sg+.Per M. Flags Use
;-----------------------------------------------------------------------------------------------------------------------------------------------
0000.000 1 Cha-MMax 1 0 0 0 8.947 0 -18.000 0 0.000% 0 400.000 1 0000 ?
0000.325 1 Cha-MMax 1 -0.0003 0.0159 0 8.947 -0.060590 -18.000 0.051472 0.575% 3.239 400.000 1 .... 0.810%
0000.650 1 Cha-MMax 1 -0.0005 0.0636 0 8.947 -0.242535 -18.000 0.051472 0.575% 13.000 400.000 1 .... 3.25%
0001.350 1 Cha-MMax 1 0.0231 -2.081 0 8.947 -3.911 -18.000 0.051472 0.575% 66.217 400.000 1 .... 21.7%
0002.050 1 Cha-MMax 1 0.0086 -4.221 0 8.947 -7.934 -18.000 0.051472 0.575% 133.961 400.000 1 .... 44.1%
0002.750 1 Cha-MMax 1 0.0080 -5.799 0 8.947 -10.899 -18.000 0.051472 0.575% 183.979 400.000 1 .... 60.6%
0003.450 1 Cha-MMax 1 0.0074 -7.376 0 8.947 -13.864 -18.000 0.051472 0.575% 233.997 400.000 1 .... 77.0%
0004.150 1 Cha-MMax 1 0.0069 -8.358 0 8.947 -15.709 -18.000 0.051472 0.575% 265.119 400.000 1 .... 87.3%
0004.850 1 Cha-MMax 1 0.0063 -9.339 0 8.947 -17.554 -18.000 0.051472 0.575% 296.241 400.000 1 .... 97.5%
0005.550 1 Cha-MMax 1 0.0057 -9.638 0 8.947 -18.115 -18.000 0.051472 0.575% 305.712 400.000 1 .C.. 100.6%
0006.250 1 Cha-MMax 1 0.0051 -9.937 0 8.947 -18.677 -18.000 0.051472 0.575% 315.183 400.000 1 .C.. 103.8%
0006.950 1 Cha-MMax 1 0.0046 -9.616 0 8.947 -18.074 -18.000 0.051472 0.575% 305.003 400.000 1 .C.. 100.4%
0007.650 1 Cha-MMax 1 0.0040 -9.295 0 8.947 -17.471 -18.000 0.051472 0.575% 294.823 400.000 1 .... 97.1%
0008.350 1 Cha-MMax 1 0.0034 -8.368 0 8.947 -15.729 -18.000 0.051472 0.575% 265.420 400.000 1 .... 87.4%
0009.050 1 Cha-MMax 1 0.0028 -7.441 0 8.947 -13.986 -18.000 0.051472 0.575% 236.017 400.000 1 .... 77.7%
0009.750 1 Cha-MMax 1 0.0023 -5.861 0 8.947 -11.017 -18.000 0.051472 0.575% 185.903 400.000 1 .... 61.2%
0010.450 1 Cha-MMax 1 0.0017 -4.281 0 8.947 -8.047 -18.000 0.051472 0.575% 135.788 400.000 1 .... 44.7%
0011.150 1 Cha-MMax 1 0.0011 -2.109 0 8.947 -3.964 -18.000 0.051472 0.575% 66.888 400.000 1 .... 22.0%
0011.850 1 Cha-MMax 1 0.0005 0.0636 0 8.947 -0.243019 -18.000 0.051472 0.575% 13.089 400.000 1 .... 3.27%
0012.175 1 Cha-MMax 1 0.0003 0.0159 0 8.947 -0.060832 -18.000 0.051472 0.575% 3.283 400.000 1 .... 0.821%
0012.500 1 Cha-MMax 1 0 0 0 8.947 0 -18.000 0 0.000% 0 400.000 1 0000 ?
;-----------------------------------------------------------------------------------------------------------------------------------------------
; 1 Cha-MMax ? ? ? ? ? -18.677 ? ? ? 315.183 ? 0 .... 103.8%
[-- Attachment #3: Type: text/plain, Size: 486 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Temporary landscape
2010-10-13 13:22 Temporary landscape Procházka Lukáš Ing. - Pontex s. r. o.
@ 2010-10-13 13:50 ` Hans Hagen
2010-10-13 14:03 ` Aditya Mahajan
0 siblings, 1 reply; 4+ messages in thread
From: Hans Hagen @ 2010-10-13 13:50 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 13-10-2010 3:22, Procházka Lukáš Ing. - Pontex s. r. o. wrote:
> Hello,
>
> I need to typeset contents of a wide file. This works:
>
> ---
> \starttext
>
> \setuppapersize[A4,landscape][A4,landscape]
> \typefile[Dim]{Cha-MMax-iDL.txt}
>
> \page
>
> % RESTORE ORIGINAL PAGE SETTINGS
>
> AAA
>
> \stoptext
You can wikify this:
\setuplayout
[location=middle]
\showframe
\def\PushPaperSize
{\edef\PopPaperSize{\setuppapersize[\papersize][\printpapersize]}}
\starttext
\setuppapersize[A4][A3]
test \page
\PushPaperSize
\setuppapersize[A4,landscape][A3,landscape]
test \page
\PopPaperSize
test \page
\stoptext
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | voip: 087 875 68 74 | www.pragma-ade.com
| www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Temporary landscape
2010-10-13 13:50 ` Hans Hagen
@ 2010-10-13 14:03 ` Aditya Mahajan
2010-10-13 15:12 ` Procházka Lukáš Ing. - Pontex s. r. o.
0 siblings, 1 reply; 4+ messages in thread
From: Aditya Mahajan @ 2010-10-13 14:03 UTC (permalink / raw)
To: mailing list for ConTeXt users
[-- Attachment #1: Type: TEXT/PLAIN, Size: 2535 bytes --]
On Wed, 13 Oct 2010, Hans Hagen wrote:
> On 13-10-2010 3:22, Procházka Lukáš Ing. - Pontex s. r. o. wrote:
>> Hello,
>>
>> I need to typeset contents of a wide file. This works:
>>
>> ---
>> \starttext
>>
>> \setuppapersize[A4,landscape][A4,landscape]
>> \typefile[Dim]{Cha-MMax-iDL.txt}
>>
>> \page
>>
>> % RESTORE ORIGINAL PAGE SETTINGS
>>
>> AAA
>>
>> \stoptext
>
> You can wikify this:
>
> \setuplayout
> [location=middle]
>
> \showframe
>
> \def\PushPaperSize
> {\edef\PopPaperSize{\setuppapersize[\papersize][\printpapersize]}}
>
> \starttext
> \setuppapersize[A4][A3]
> test \page
> \PushPaperSize
> \setuppapersize[A4,landscape][A3,landscape]
> test \page
> \PopPaperSize
> test \page
> \stoptext
From my to be completed TUGboat article:
\section {Changing paper size within a document}
To get one page (containing a table or a figure) in landscape
mode, you can use \type{\adaptpapersize}. For example,
\starttyping
\definepapersize[main] [A4] [A4]
\definepapersize[extra][A4,landscape]
[A4,landscape]
\setuppapersize[main]
\starttext
Page 1. Potrait \page
Page 2. Potrait \page
\adaptpapersize[extra]
Page 3. Landscape \page
Page 4. Potrait \page
\stoptext
\stoptyping
If you have a full page figure that you want to include in a landscape
paper, you can combine \type{\adaptpapersize} with \CONTEXT's postponing
mechanism.
\starttyping
\startpostponing
\adaptpapersize[extra]
\placefigure
[here]
[fig:reference]
{The caption of the figure}
{\extrenalgraphics[full-page-figure]}
\page
\stoppostponing
\stoptyping
The \type{postponing} environment postpones the figure until the next
page. When the new page starts, \type{\adaptpapersize} changes to
landscape mode. The \type{\page} is the end is to make sure even if some
place is remaining on the page, we do not get any text there.
To get more than one page in landscape, you can reuse
\type{\setuppapersize}.
For example,
\starttyping
\definepapersize[main] [A4] [A4]
\definepapersize[extra][A4,landscape]
[A4,landscape]
\setuppapersize[main]
\starttext
Page 1. Potrait \page
Page 2. Potrait \page
\setuppapersize[extra]
Page 3. Landscape \page
Page 4. Landscape \page
\setuppapersize[main]
Page 5. Potrait \page
Page 6. Potrait \page
\stoptext
\stoptyping
Aditya
[-- Attachment #2: Type: text/plain, Size: 486 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread
* Re: Temporary landscape
2010-10-13 14:03 ` Aditya Mahajan
@ 2010-10-13 15:12 ` Procházka Lukáš Ing. - Pontex s. r. o.
0 siblings, 0 replies; 4+ messages in thread
From: Procházka Lukáš Ing. - Pontex s. r. o. @ 2010-10-13 15:12 UTC (permalink / raw)
To: mailing list for ConTeXt users
Thank you both for the suggestions. My final code looks like this:
---
\def\PushPaperSize{\edef\PopPaperSize{\setuppapersize[\papersize][\printpapersize]}}
\definehead[subjectLand][subject]
\setuphead[subjectLand][before={\PushPaperSize\page},style=bold]
\setuptyping[Dim][bodyfont=small,style={\ttx\setupinterlinespace}]
\starttext
\def\T#1#2{
\subjectLand{#1}
\setuppapersize[A4,landscape][A4,landscape]
\typefile[Dim]{../../Statics/Dim/Res/#2.txt}
\typefile[Dim]{../../Statics/Dim/Res/#2.txt} % Just to test (=> more than one page)
\typefile[Dim]{../../Statics/Dim/Res/#2.txt} % Just to test (=> more than one page)
\page
\PopPaperSize
}
\T{A}{ULS-MMax-iDL}
\T{B}{ULS-MMax-iDL}
\T{C}{ULS-MMax-iDL}
\T{D}{ULS-MMax-iDL}
AAA
\stoptext
---
I'd have one more question about page layout - let's have the following code:
---
\showframe
\starttext
AAA
\page
\setuppapersize[A4,landscape][A4,landscape]
BBB
\page
\setuppapersize[A4,landscape][A4,landscape]
\setuplayout[topspace=3in] % How to change text height to keep the bottom print range?
CCC
\stoptext
---
In this example, I changed the topsize by 2in, i.e. 3in (new value) - 1in (default = previous value). And I want to shorten the textheight by the same difference, i.e. by 2in (i.e. to keep the bottom range of print space).
I know that I can set textheight directly - but I don't want to do so, I want this value to be computed from the change of the topsize. Is it possible somehow?
Moreover, would it be possible by Lua code? Something like this (pseudo)code:
---
\startluacode
local ts, th = context.topspace, context.textheight
local dif = 72 -- 72bp = 1in
-- Or to call a conversion routine, e.g. in2bp(1), if it exists?
ts = ts + dif
th = th - dif
context(string.format("\\setuplayout[topspace=%i,textheight=%i]", ts, th))
-- or: context.setuplayout{topspace=ts, textheight=th}
\stopluacode
---
Best regards,
Lukas
On Wed, 13 Oct 2010 16:03:33 +0200, Aditya Mahajan <adityam@umich.edu> wrote:
> On Wed, 13 Oct 2010, Hans Hagen wrote:
>
>> On 13-10-2010 3:22, Procházka Lukáš Ing. - Pontex s. r. o. wrote:
>>> Hello,
>>>
>>> I need to typeset contents of a wide file. This works:
>>>
>>> ---
>>> \starttext
>>>
>>> \setuppapersize[A4,landscape][A4,landscape]
>>> \typefile[Dim]{Cha-MMax-iDL.txt}
>>>
>>> \page
>>>
>>> % RESTORE ORIGINAL PAGE SETTINGS
>>>
>>> AAA
>>>
>>> \stoptext
>>
>> You can wikify this:
>>
>> \setuplayout
>> [location=middle]
>>
>> \showframe
>>
>> \def\PushPaperSize
>> {\edef\PopPaperSize{\setuppapersize[\papersize][\printpapersize]}}
>>
>> \starttext
>> \setuppapersize[A4][A3]
>> test \page
>> \PushPaperSize
>> \setuppapersize[A4,landscape][A3,landscape]
>> test \page
>> \PopPaperSize
>> test \page
>> \stoptext
>
> From my to be completed TUGboat article:
>
> \section {Changing paper size within a document}
>
> To get one page (containing a table or a figure) in landscape
> mode, you can use \type{\adaptpapersize}. For example,
>
> \starttyping
> \definepapersize[main] [A4] [A4]
> \definepapersize[extra][A4,landscape]
> [A4,landscape]
>
> \setuppapersize[main]
> \starttext
> Page 1. Potrait \page
> Page 2. Potrait \page
> \adaptpapersize[extra]
> Page 3. Landscape \page
> Page 4. Potrait \page
> \stoptext
> \stoptyping
>
> If you have a full page figure that you want to include in a landscape
> paper, you can combine \type{\adaptpapersize} with \CONTEXT's postponing
> mechanism.
>
> \starttyping
> \startpostponing
> \adaptpapersize[extra]
> \placefigure
> [here]
> [fig:reference]
> {The caption of the figure}
> {\extrenalgraphics[full-page-figure]}
> \page
> \stoppostponing
> \stoptyping
>
> The \type{postponing} environment postpones the figure until the next
> page. When the new page starts, \type{\adaptpapersize} changes to
> landscape mode. The \type{\page} is the end is to make sure even if some
> place is remaining on the page, we do not get any text there.
>
> To get more than one page in landscape, you can reuse
> \type{\setuppapersize}.
> For example,
>
> \starttyping
> \definepapersize[main] [A4] [A4]
> \definepapersize[extra][A4,landscape]
> [A4,landscape]
>
> \setuppapersize[main]
> \starttext
> Page 1. Potrait \page
> Page 2. Potrait \page
> \setuppapersize[extra]
> Page 3. Landscape \page
> Page 4. Landscape \page
> \setuppapersize[main]
> Page 5. Potrait \page
> Page 6. Potrait \page
> \stoptext
> \stoptyping
>
>
> Aditya
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://tex.aanhet.net
archive : http://foundry.supelec.fr/projects/contextrev/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 4+ messages in thread
end of thread, other threads:[~2010-10-13 15:12 UTC | newest]
Thread overview: 4+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2010-10-13 13:22 Temporary landscape Procházka Lukáš Ing. - Pontex s. r. o.
2010-10-13 13:50 ` Hans Hagen
2010-10-13 14:03 ` Aditya Mahajan
2010-10-13 15:12 ` Procházka Lukáš Ing. - Pontex s. r. o.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).