* luatex binary is too old
@ 2018-01-15 13:47 Roger Mason
2018-01-15 13:56 ` Hans Hagen
0 siblings, 1 reply; 8+ messages in thread
From: Roger Mason @ 2018-01-15 13:47 UTC (permalink / raw)
To: ConTeXt mailing List
Hello,
I just updated ConTeXt:
context --version
resolvers | trees | analyzing 'home:texmf'
resolvers | globbing | confusing filename, name: 'README.txt', lower: 'readme.txt', already: 'ReadMe.txt'
mtx-context | ConTeXt Process Management 1.02
mtx-context |
mtx-context | main context file: /opt/context/tex/texmf-context/tex/context/base/mkiv/context.mkiv
mtx-context | current version: 2018.01.14 15:55
When I try to compile a file:
context --mode=manuscript --result=MineralsGemsMS.pdf --purgeall
MineralsGems.tex
I get this error:
!!!!: Your luatex binary is too old, you need at least version 1.05!
Where do I get the updated luatex binary?
I'm running on FreeBSD 10.3, 32 bit.
Thanks for any help,
Roger
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: luatex binary is too old
2018-01-15 13:47 luatex binary is too old Roger Mason
@ 2018-01-15 13:56 ` Hans Hagen
2018-01-15 14:26 ` Mojca Miklavec
2018-01-15 16:19 ` Roger Mason
0 siblings, 2 replies; 8+ messages in thread
From: Hans Hagen @ 2018-01-15 13:56 UTC (permalink / raw)
To: ntg-context
On 1/15/2018 2:47 PM, Roger Mason wrote:
> Hello,
>
> I just updated ConTeXt:
>
> context --version
>
> resolvers | trees | analyzing 'home:texmf'
> resolvers | globbing | confusing filename, name: 'README.txt', lower: 'readme.txt', already: 'ReadMe.txt'
> mtx-context | ConTeXt Process Management 1.02
> mtx-context |
> mtx-context | main context file: /opt/context/tex/texmf-context/tex/context/base/mkiv/context.mkiv
> mtx-context | current version: 2018.01.14 15:55
>
> When I try to compile a file:
>
> context --mode=manuscript --result=MineralsGemsMS.pdf --purgeall
> MineralsGems.tex
>
> I get this error:
>
> !!!!: Your luatex binary is too old, you need at least version 1.05!
>
> Where do I get the updated luatex binary?
>
> I'm running on FreeBSD 10.3, 32 bit.
Does that binary come from the garden too?
Hans
-----------------------------------------------------------------
Hans Hagen | PRAGMA ADE
Ridderstraat 27 | 8061 GH Hasselt | The Netherlands
tel: 038 477 53 69 | www.pragma-ade.nl | www.pragma-pod.nl
-----------------------------------------------------------------
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: luatex binary is too old
2018-01-15 13:56 ` Hans Hagen
@ 2018-01-15 14:26 ` Mojca Miklavec
2018-01-15 19:51 ` Mojca Miklavec
2018-01-15 16:19 ` Roger Mason
1 sibling, 1 reply; 8+ messages in thread
From: Mojca Miklavec @ 2018-01-15 14:26 UTC (permalink / raw)
To: mailing list for ConTeXt users
On 15 January 2018 at 14:56, Hans Hagen wrote:
> On 1/15/2018 2:47 PM, Roger Mason wrote:
>>
>> !!!!: Your luatex binary is too old, you need at least version 1.05!
>>
>> Where do I get the updated luatex binary?
>>
>> I'm running on FreeBSD 10.3, 32 bit.
>
> Does that binary come from the garden too?
I can take a look.
It's quite possible that FreeBSD didn't get updated after the problems
with firewalls and networks being shifted around at both ends.
Mojca
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: luatex binary is too old
2018-01-15 13:56 ` Hans Hagen
2018-01-15 14:26 ` Mojca Miklavec
@ 2018-01-15 16:19 ` Roger Mason
1 sibling, 0 replies; 8+ messages in thread
From: Roger Mason @ 2018-01-15 16:19 UTC (permalink / raw)
To: mailing list for ConTeXt users
Hans Hagen <pragma@wxs.nl> writes:
>> !!!!: Your luatex binary is too old, you need at least version 1.05!
>>
>> Where do I get the updated luatex binary?
>>
>> I'm running on FreeBSD 10.3, 32 bit.
> Does that binary come from the garden too?
>
> Hans
Yes, I did not compile it myself, if that is what you are asking.
Cheers,
Roger
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: luatex binary is too old
2018-01-15 14:26 ` Mojca Miklavec
@ 2018-01-15 19:51 ` Mojca Miklavec
2018-01-15 19:54 ` luigi scarso
0 siblings, 1 reply; 8+ messages in thread
From: Mojca Miklavec @ 2018-01-15 19:51 UTC (permalink / raw)
To: mailing list for ConTeXt users; +Cc: Alan BRASLAU
On 15 January 2018 at 15:26, Mojca Miklavec wrote:
> On 15 January 2018 at 14:56, Hans Hagen wrote:
>> On 1/15/2018 2:47 PM, Roger Mason wrote:
>>>
>>> !!!!: Your luatex binary is too old, you need at least version 1.05!
>>>
>>> Where do I get the updated luatex binary?
>>>
>>> I'm running on FreeBSD 10.3, 32 bit.
>>
>> Does that binary come from the garden too?
>
> I can take a look.
>
> It's quite possible that FreeBSD didn't get updated after the problems
> with firewalls and networks being shifted around at both ends.
I tried to compile it, but it fails with
In file included from
../../../source/libs/poppler/poppler-src/poppler/Annot.cc:62:
In file included from
../../../source/libs/poppler/poppler-src/poppler/PDFDoc.h:53:
../../../source/libs/poppler/poppler-src/poppler/Form.h:271:79: error:
unknown type name 'time_t'
SignatureInfo *validateSignature(bool doVerifyCert, bool
forceRevalidation, time_t validationTime);
^
../../../source/libs/poppler/poppler-src/poppler/Form.h:534:79: error:
unknown type name 'time_t'
SignatureInfo *validateSignature(bool doVerifyCert, bool
forceRevalidation, time_t validationTime);
^
2 errors generated.
Mojca
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: luatex binary is too old
2018-01-15 19:51 ` Mojca Miklavec
@ 2018-01-15 19:54 ` luigi scarso
2018-01-15 20:12 ` Mojca Miklavec
0 siblings, 1 reply; 8+ messages in thread
From: luigi scarso @ 2018-01-15 19:54 UTC (permalink / raw)
To: mailing list for ConTeXt users; +Cc: Alan BRASLAU
[-- Attachment #1.1: Type: text/plain, Size: 1770 bytes --]
Il 15 gen 2018 20:52, "Mojca Miklavec" <mojca.miklavec.lists@gmail.com> ha
scritto:
On 15 January 2018 at 15:26, Mojca Miklavec wrote:
> On 15 January 2018 at 14:56, Hans Hagen wrote:
>> On 1/15/2018 2:47 PM, Roger Mason wrote:
>>>
>>> !!!!: Your luatex binary is too old, you need at least version 1.05!
>>>
>>> Where do I get the updated luatex binary?
>>>
>>> I'm running on FreeBSD 10.3, 32 bit.
>>
>> Does that binary come from the garden too?
>
> I can take a look.
>
> It's quite possible that FreeBSD didn't get updated after the problems
> with firewalls and networks being shifted around at both ends.
I tried to compile it, but it fails with
In file included from
../../../source/libs/poppler/poppler-src/poppler/Annot.cc:62:
In file included from
../../../source/libs/poppler/poppler-src/poppler/PDFDoc.h:53:
../../../source/libs/poppler/poppler-src/poppler/Form.h:271:79: error:
unknown type name 'time_t'
SignatureInfo *validateSignature(bool doVerifyCert, bool
forceRevalidation, time_t validationTime);
^
../../../source/libs/poppler/poppler-src/poppler/Form.h:534:79: error:
unknown type name 'time_t'
SignatureInfo *validateSignature(bool doVerifyCert, bool
forceRevalidation, time_t validationTime);
^
2 errors generated.
Mojca
____________________________________________________________
_______________________
If your question is of interest to others as well, please add an entry to
the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/
listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
____________________________________________________________
_______________________
Hm ,trunk ?
[-- Attachment #1.2: Type: text/html, Size: 3215 bytes --]
[-- Attachment #2: Type: text/plain, Size: 492 bytes --]
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: luatex binary is too old
2018-01-15 19:54 ` luigi scarso
@ 2018-01-15 20:12 ` Mojca Miklavec
2018-01-15 21:59 ` luigi scarso
0 siblings, 1 reply; 8+ messages in thread
From: Mojca Miklavec @ 2018-01-15 20:12 UTC (permalink / raw)
To: mailing list for ConTeXt users; +Cc: Karl Berry, Alan BRASLAU
On 15 January 2018 at 20:54, luigi scarso wrote:
> Il 15 gen 2018 20:52, "Mojca Miklavec" ha scritto:
> On 15 January 2018 at 15:26, Mojca Miklavec wrote:
>> On 15 January 2018 at 14:56, Hans Hagen wrote:
>>> On 1/15/2018 2:47 PM, Roger Mason wrote:
>>>>
>>>> !!!!: Your luatex binary is too old, you need at least version 1.05!
>>>>
>>>> Where do I get the updated luatex binary?
>>>>
>>>> I'm running on FreeBSD 10.3, 32 bit.
>>>
>>> Does that binary come from the garden too?
>>
>> I can take a look.
>>
>> It's quite possible that FreeBSD didn't get updated after the problems
>> with firewalls and networks being shifted around at both ends.
>
> I tried to compile it, but it fails with
>
> In file included from
> ../../../source/libs/poppler/poppler-src/poppler/Annot.cc:62:
> In file included from
> ../../../source/libs/poppler/poppler-src/poppler/PDFDoc.h:53:
> ../../../source/libs/poppler/poppler-src/poppler/Form.h:271:79: error:
> unknown type name 'time_t'
> SignatureInfo *validateSignature(bool doVerifyCert, bool
> forceRevalidation, time_t validationTime);
>
> ^
> ../../../source/libs/poppler/poppler-src/poppler/Form.h:534:79: error:
> unknown type name 'time_t'
> SignatureInfo *validateSignature(bool doVerifyCert, bool
> forceRevalidation, time_t validationTime);
>
> ^
> 2 errors generated.
>
> Hm, trunk ?
Are you suggesting to distribute LuaTeX trunk for everyone?
Anyway, the same problem happens with the latest TeX Live sources as well.
I added
#include <ctime>
to poppler-src/poppler/Form.h after which the build proceeds, but
later fails again building ICU.
../../../libs/icu/icu-src/source/i18n/coll.cpp:157:28: error: pasting
formed 'u"Collator"', an invalid preprocessing token
: ICULocaleService(UNICODE_STRING_SIMPLE("Collator"))
^
Mojca
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
* Re: luatex binary is too old
2018-01-15 20:12 ` Mojca Miklavec
@ 2018-01-15 21:59 ` luigi scarso
0 siblings, 0 replies; 8+ messages in thread
From: luigi scarso @ 2018-01-15 21:59 UTC (permalink / raw)
To: mailing list for ConTeXt users; +Cc: Alan BRASLAU, Karl Berry
On Mon, Jan 15, 2018 at 9:12 PM, Mojca Miklavec
<mojca.miklavec.lists@gmail.com> wrote:
> On 15 January 2018 at 20:54, luigi scarso wrote:
>> Il 15 gen 2018 20:52, "Mojca Miklavec" ha scritto:
>> On 15 January 2018 at 15:26, Mojca Miklavec wrote:
>>> On 15 January 2018 at 14:56, Hans Hagen wrote:
>>>> On 1/15/2018 2:47 PM, Roger Mason wrote:
>>>>>
>>>>> !!!!: Your luatex binary is too old, you need at least version 1.05!
>>>>>
>>>>> Where do I get the updated luatex binary?
>>>>>
>>>>> I'm running on FreeBSD 10.3, 32 bit.
>>>>
>>>> Does that binary come from the garden too?
>>>
>>> I can take a look.
>>>
>>> It's quite possible that FreeBSD didn't get updated after the problems
>>> with firewalls and networks being shifted around at both ends.
>>
>> I tried to compile it, but it fails with
>>
>> In file included from
>> ../../../source/libs/poppler/poppler-src/poppler/Annot.cc:62:
>> In file included from
>> ../../../source/libs/poppler/poppler-src/poppler/PDFDoc.h:53:
>> ../../../source/libs/poppler/poppler-src/poppler/Form.h:271:79: error:
>> unknown type name 'time_t'
>> SignatureInfo *validateSignature(bool doVerifyCert, bool
>> forceRevalidation, time_t validationTime);
>>
>> ^
>> ../../../source/libs/poppler/poppler-src/poppler/Form.h:534:79: error:
>> unknown type name 'time_t'
>> SignatureInfo *validateSignature(bool doVerifyCert, bool
>> forceRevalidation, time_t validationTime);
>>
>> ^
>> 2 errors generated.
>>
>> Hm, trunk ?
>
> Are you suggesting to distribute LuaTeX trunk for everyone?
I mean if it's trunk or tags/1.06.3
trunk is aligned with texlive
and last time I have compiled TeX Live revision 46275 built
2018-01-10T10:00:19+00:00 UTC
was ok for Linux .
--
luigi
___________________________________________________________________________________
If your question is of interest to others as well, please add an entry to the Wiki!
maillist : ntg-context@ntg.nl / http://www.ntg.nl/mailman/listinfo/ntg-context
webpage : http://www.pragma-ade.nl / http://context.aanhet.net
archive : https://bitbucket.org/phg/context-mirror/commits/
wiki : http://contextgarden.net
___________________________________________________________________________________
^ permalink raw reply [flat|nested] 8+ messages in thread
end of thread, other threads:[~2018-01-15 21:59 UTC | newest]
Thread overview: 8+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2018-01-15 13:47 luatex binary is too old Roger Mason
2018-01-15 13:56 ` Hans Hagen
2018-01-15 14:26 ` Mojca Miklavec
2018-01-15 19:51 ` Mojca Miklavec
2018-01-15 19:54 ` luigi scarso
2018-01-15 20:12 ` Mojca Miklavec
2018-01-15 21:59 ` luigi scarso
2018-01-15 16:19 ` Roger Mason
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).