* Converting headings (.odt -> .tex)
@ 2023-05-15 16:34 Ian Fantom
[not found] ` <1201761b-53e9-f3bc-a6b5-4eedaf3b5146-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org>
0 siblings, 1 reply; 10+ messages in thread
From: Ian Fantom @ 2023-05-15 16:34 UTC (permalink / raw)
To: pandoc-discuss
I've tried converting a book in .odt (LibreOffice Writer / Ubuntu) to
.tex and viewing it in Texstudio.
It's not converting any of the headings and subheadings - just producing
normal text. I used the '-s' and the '-o' options.
I think there must be something I haven't understood in the Pandoc User
Guide (https://pandoc.org/MANUAL.html)
I was expecting some way of defining a conversion table from Writer to
Latex. For instance:
'Preface' is in style 'subtitle' in Writer, and is converted to:
'\protect\hypertarget{anchor-4}{}{}Preface' and appears as normal text
in .tex.
Any ideas how I should proceed?
Thanks, Ian Fantom
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Converting headings (.odt -> .tex)
[not found] ` <1201761b-53e9-f3bc-a6b5-4eedaf3b5146-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org>
@ 2023-05-15 17:15 ` BPJ
[not found] ` <CADAJKhBLFXzYf_mNc+uZ2Ur+1kYn3zpgBR7B7tFqjOWaAGCiRQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2023-05-15 17:18 ` Bastien DUMONT
1 sibling, 1 reply; 10+ messages in thread
From: BPJ @ 2023-05-15 17:15 UTC (permalink / raw)
To: pandoc-discuss
[-- Attachment #1: Type: text/plain, Size: 1920 bytes --]
Probably whoever wrote the ODT file faked the headings by enlarging the
font and applying bold font rather than applying the "Heading 1" etc named
paragraph styles. Only the latter will be recognised as headings by Pandoc.
There are a lot of such files in the wild.
Den mån 15 maj 2023 18:35Ian Fantom <ian-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org> skrev:
> I've tried converting a book in .odt (LibreOffice Writer / Ubuntu) to
> .tex and viewing it in Texstudio.
>
> It's not converting any of the headings and subheadings - just producing
> normal text. I used the '-s' and the '-o' options.
>
> I think there must be something I haven't understood in the Pandoc User
> Guide (https://pandoc.org/MANUAL.html)
>
> I was expecting some way of defining a conversion table from Writer to
> Latex. For instance:
>
> 'Preface' is in style 'subtitle' in Writer, and is converted to:
> '\protect\hypertarget{anchor-4}{}{}Preface' and appears as normal text
> in .tex.
>
> Any ideas how I should proceed?
>
> Thanks, Ian Fantom
>
>
> --
> You received this message because you are subscribed to the Google Groups
> "pandoc-discuss" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/pandoc-discuss/1201761b-53e9-f3bc-a6b5-4eedaf3b5146%40fantom.org.uk
> .
>
--
You received this message because you are subscribed to the Google Groups "pandoc-discuss" group.
To unsubscribe from this group and stop receiving emails from it, send an email to pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
To view this discussion on the web visit https://groups.google.com/d/msgid/pandoc-discuss/CADAJKhBLFXzYf_mNc%2BuZ2Ur%2B1kYn3zpgBR7B7tFqjOWaAGCiRQ%40mail.gmail.com.
[-- Attachment #2: Type: text/html, Size: 2954 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Converting headings (.odt -> .tex)
[not found] ` <1201761b-53e9-f3bc-a6b5-4eedaf3b5146-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org>
2023-05-15 17:15 ` BPJ
@ 2023-05-15 17:18 ` Bastien DUMONT
2023-05-15 19:20 ` Ian Fantom
1 sibling, 1 reply; 10+ messages in thread
From: Bastien DUMONT @ 2023-05-15 17:18 UTC (permalink / raw)
To: pandoc-discuss-/JYPxA39Uh5TLH3MbocFFw
Your styles may not have the names expected by Pandoc. To know what it supports, you can use the command
pandoc -o reference.odt --print-default-data-file reference.odt
and inspect the styles included in the document.
Le Monday 15 May 2023 à 05:34:44PM, Ian Fantom a écrit :
> I've tried converting a book in .odt (LibreOffice Writer / Ubuntu) to .tex
> and viewing it in Texstudio.
>
> It's not converting any of the headings and subheadings - just producing
> normal text. I used the '-s' and the '-o' options.
>
> I think there must be something I haven't understood in the Pandoc User
> Guide (https://pandoc.org/MANUAL.html)
>
> I was expecting some way of defining a conversion table from Writer to
> Latex. For instance:
>
> 'Preface' is in style 'subtitle' in Writer, and is converted to:
> '\protect\hypertarget{anchor-4}{}{}Preface' and appears as normal text in
> .tex.
>
> Any ideas how I should proceed?
>
> Thanks, Ian Fantom
>
>
> --
> You received this message because you are subscribed to the Google Groups "pandoc-discuss" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
> To view this discussion on the web visit https://groups.google.com/d/msgid/pandoc-discuss/1201761b-53e9-f3bc-a6b5-4eedaf3b5146%40fantom.org.uk.
--
You received this message because you are subscribed to the Google Groups "pandoc-discuss" group.
To unsubscribe from this group and stop receiving emails from it, send an email to pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
To view this discussion on the web visit https://groups.google.com/d/msgid/pandoc-discuss/ZGJpfgC_uBS8CUdT%40localhost.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Converting headings (.odt -> .tex)
2023-05-15 17:18 ` Bastien DUMONT
@ 2023-05-15 19:20 ` Ian Fantom
0 siblings, 0 replies; 10+ messages in thread
From: Ian Fantom @ 2023-05-15 19:20 UTC (permalink / raw)
To: pandoc-discuss-/JYPxA39Uh5TLH3MbocFFw
[-- Attachment #1: Type: text/plain, Size: 2477 bytes --]
Thanks. I did have a look but I'll try again. I tried following the guide for writing my own template, but failed.
Ian
On 15 May 2023 18:18:54 BST, Bastien DUMONT <bastien.dumont-VwIFZPTo/vqsTnJN9+BGXg@public.gmane.org> wrote:
>Your styles may not have the names expected by Pandoc. To know what it supports, you can use the command
>
>pandoc -o reference.odt --print-default-data-file reference.odt
>
>and inspect the styles included in the document.
>
>Le Monday 15 May 2023 à 05:34:44PM, Ian Fantom a écrit :
>> I've tried converting a book in .odt (LibreOffice Writer / Ubuntu) to .tex
>> and viewing it in Texstudio.
>>
>> It's not converting any of the headings and subheadings - just producing
>> normal text. I used the '-s' and the '-o' options.
>>
>> I think there must be something I haven't understood in the Pandoc User
>> Guide (https://pandoc.org/MANUAL.html)
>>
>> I was expecting some way of defining a conversion table from Writer to
>> Latex. For instance:
>>
>> 'Preface' is in style 'subtitle' in Writer, and is converted to:
>> '\protect\hypertarget{anchor-4}{}{}Preface' and appears as normal text in
>> .tex.
>>
>> Any ideas how I should proceed?
>>
>> Thanks, Ian Fantom
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups "pandoc-discuss" group.
>> To unsubscribe from this group and stop receiving emails from it, send an email to pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
>> To view this discussion on the web visit https://groups.google.com/d/msgid/pandoc-discuss/1201761b-53e9-f3bc-a6b5-4eedaf3b5146%40fantom.org.uk.
>
>--
>You received this message because you are subscribed to the Google Groups "pandoc-discuss" group.
>To unsubscribe from this group and stop receiving emails from it, send an email to pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
>To view this discussion on the web visit https://groups.google.com/d/msgid/pandoc-discuss/ZGJpfgC_uBS8CUdT%40localhost.
--
You received this message because you are subscribed to the Google Groups "pandoc-discuss" group.
To unsubscribe from this group and stop receiving emails from it, send an email to pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
To view this discussion on the web visit https://groups.google.com/d/msgid/pandoc-discuss/D0A397CD-A01A-4964-8BB1-F70D9C15B245%40fantom.org.uk.
[-- Attachment #2: Type: text/html, Size: 2940 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Converting headings (.odt -> .tex)
[not found] ` <CADAJKhBLFXzYf_mNc+uZ2Ur+1kYn3zpgBR7B7tFqjOWaAGCiRQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
@ 2023-05-15 19:26 ` Ian Fantom
[not found] ` <3BA7371B-D3AC-43A2-B8E3-C6FAB0A977E4-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org>
0 siblings, 1 reply; 10+ messages in thread
From: Ian Fantom @ 2023-05-15 19:26 UTC (permalink / raw)
To: pandoc-discuss-/JYPxA39Uh5TLH3MbocFFw, BPJ, pandoc-discuss
[-- Attachment #1: Type: text/plain, Size: 2597 bytes --]
Well the .odt file uses styles from Writer: Title, Subtitle, Header3.
Would looking up the code used in the .fodt help?
Ian
On 15 May 2023 18:15:06 BST, BPJ <bpj-J3H7GcXPSITLoDKTGw+V6w@public.gmane.org> wrote:
>Probably whoever wrote the ODT file faked the headings by enlarging the
>font and applying bold font rather than applying the "Heading 1" etc named
>paragraph styles. Only the latter will be recognised as headings by Pandoc.
>There are a lot of such files in the wild.
>
>Den mån 15 maj 2023 18:35Ian Fantom <ian-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org> skrev:
>
>> I've tried converting a book in .odt (LibreOffice Writer / Ubuntu) to
>> .tex and viewing it in Texstudio.
>>
>> It's not converting any of the headings and subheadings - just producing
>> normal text. I used the '-s' and the '-o' options.
>>
>> I think there must be something I haven't understood in the Pandoc User
>> Guide (https://pandoc.org/MANUAL.html)
>>
>> I was expecting some way of defining a conversion table from Writer to
>> Latex. For instance:
>>
>> 'Preface' is in style 'subtitle' in Writer, and is converted to:
>> '\protect\hypertarget{anchor-4}{}{}Preface' and appears as normal text
>> in .tex.
>>
>> Any ideas how I should proceed?
>>
>> Thanks, Ian Fantom
>>
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "pandoc-discuss" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
>> To view this discussion on the web visit
>> https://groups.google.com/d/msgid/pandoc-discuss/1201761b-53e9-f3bc-a6b5-4eedaf3b5146%40fantom.org.uk
>> .
>>
>
>--
>You received this message because you are subscribed to the Google Groups "pandoc-discuss" group.
>To unsubscribe from this group and stop receiving emails from it, send an email to pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
>To view this discussion on the web visit https://groups.google.com/d/msgid/pandoc-discuss/CADAJKhBLFXzYf_mNc%2BuZ2Ur%2B1kYn3zpgBR7B7tFqjOWaAGCiRQ%40mail.gmail.com.
--
You received this message because you are subscribed to the Google Groups "pandoc-discuss" group.
To unsubscribe from this group and stop receiving emails from it, send an email to pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
To view this discussion on the web visit https://groups.google.com/d/msgid/pandoc-discuss/3BA7371B-D3AC-43A2-B8E3-C6FAB0A977E4%40fantom.org.uk.
[-- Attachment #2: Type: text/html, Size: 3282 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Converting headings (.odt -> .tex)
[not found] ` <3BA7371B-D3AC-43A2-B8E3-C6FAB0A977E4-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org>
@ 2023-05-16 10:32 ` Ian Fantom
[not found] ` <7316b85d-27a0-abf5-1e0b-09e0c40186fd-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org>
0 siblings, 1 reply; 10+ messages in thread
From: Ian Fantom @ 2023-05-16 10:32 UTC (permalink / raw)
To: pandoc-discuss-/JYPxA39Uh5TLH3MbocFFw
[-- Attachment #1: Type: text/plain, Size: 4021 bytes --]
I'm still puzzled on how the correspondences work. I must be
misunderstanding something in the Manual
(https://pandoc.org/chunkedhtml-demo/6-templates.html).
If I enter 'pandoc -D odt' then I get the contents of the default file
for odt, but if I enter 'pandoc -D tex' I get "Could not find data file
templates/default.tex".
The odt default file contains the lines:
- ---------------
$for(header-includes)$
$header-includes$
...
$if(title)$
<text:p text:style-name="Title">$title$</text:p>
$endif$
$if(subtitle)$
<text:p text:style-name="Subtitle">$subtitle$</text:p>
$endif$
- -----------------------
The odt book title is of type 'Title', and the chapter titles are of
type 'Subtitle'. Subheadings are of type 'Header 3'. But instead of
getting chapter headings I get eg:
\protect\hypertarget{anchor-4}{}{}Preface
Perhaps someone could explain.
Many thanks,
Ian
On 15/05/2023 20:26, Ian Fantom wrote:
> Well the .odt file uses styles from Writer: Title, Subtitle, Header3.
>
> Would looking up the code used in the .fodt help?
>
> Ian
>
>
> On 15 May 2023 18:15:06 BST, BPJ <bpj-J3H7GcXPSITLoDKTGw+V6w@public.gmane.org> wrote:
>
> Probably whoever wrote the ODT file faked the headings by
> enlarging the font and applying bold font rather than applying the
> "Heading 1" etc named paragraph styles. Only the latter will be
> recognised as headings by Pandoc. There are a lot of such files in
> the wild.
>
> Den mån 15 maj 2023 18:35Ian Fantom <ian-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org> skrev:
>
> I've tried converting a book in .odt (LibreOffice Writer /
> Ubuntu) to
> .tex and viewing it in Texstudio.
>
> It's not converting any of the headings and subheadings - just
> producing
> normal text. I used the '-s' and the '-o' options.
>
> I think there must be something I haven't understood in the
> Pandoc User
> Guide (https://pandoc.org/MANUAL.html)
>
> I was expecting some way of defining a conversion table from
> Writer to
> Latex. For instance:
>
> 'Preface' is in style 'subtitle' in Writer, and is converted to:
> '\protect\hypertarget{anchor-4}{}{}Preface' and appears as
> normal text
> in .tex.
>
> Any ideas how I should proceed?
>
> Thanks, Ian Fantom
>
>
> --
> You received this message because you are subscribed to the
> Google Groups "pandoc-discuss" group.
> To unsubscribe from this group and stop receiving emails from
> it, send an email to
> pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
> <mailto:pandoc-discuss%2Bunsubscribe-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org>.
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/pandoc-discuss/1201761b-53e9-f3bc-a6b5-4eedaf3b5146%40fantom.org.uk.
>
> --
> You received this message because you are subscribed to the Google
> Groups "pandoc-discuss" group.
> To unsubscribe from this group and stop receiving emails from it, send
> an email to pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/pandoc-discuss/3BA7371B-D3AC-43A2-B8E3-C6FAB0A977E4%40fantom.org.uk
> <https://groups.google.com/d/msgid/pandoc-discuss/3BA7371B-D3AC-43A2-B8E3-C6FAB0A977E4%40fantom.org.uk?utm_medium=email&utm_source=footer>.
--
You received this message because you are subscribed to the Google Groups "pandoc-discuss" group.
To unsubscribe from this group and stop receiving emails from it, send an email to pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
To view this discussion on the web visit https://groups.google.com/d/msgid/pandoc-discuss/7316b85d-27a0-abf5-1e0b-09e0c40186fd%40fantom.org.uk.
[-- Attachment #2: Type: text/html, Size: 7035 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Converting headings (.odt -> .tex)
[not found] ` <7316b85d-27a0-abf5-1e0b-09e0c40186fd-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org>
@ 2023-05-16 10:59 ` Bastien DUMONT
2023-05-16 15:09 ` Ian Fantom
0 siblings, 1 reply; 10+ messages in thread
From: Bastien DUMONT @ 2023-05-16 10:59 UTC (permalink / raw)
To: pandoc-discuss-/JYPxA39Uh5TLH3MbocFFw
Indeed, Pandoc does not seem to extract the title and the subtitle. I just created an ODT file with the following body:
```
<text:p text:style-name="Title">Title</text:p>
<text:p text:style-name="Subtitle">subtitle</text:p>
<text:p text:style-name="P1"/>
<text:h text:style-name="Heading_20_3" text:outline-level="3">A header</text:h>
```
The two first elements are handled as normal paragraph. However, the last element is correctly read as a header level 3.
You could set the title and the subtitle in a metadata file (called with --metadata-file) and remove them from your odt file. As for your headers, we cannot know why Pandoc does not recognize them without looking into your file (are, better, a sample of your file reduced to the strict minimum).
To get the default file for LaTeX, run pandoc -D latex.
Le Tuesday 16 May 2023 à 11:32:32AM, Ian Fantom a écrit :
> I'm still puzzled on how the correspondences work. I must be misunderstanding
> something in the Manual ([1]https://pandoc.org/chunkedhtml-demo/
> 6-templates.html).
>
> If I enter 'pandoc -D odt' then I get the contents of the default file for odt,
> but if I enter 'pandoc -D tex' I get "Could not find data file templates/
> default.tex".
>
> The odt default file contains the lines:
>
> - ---------------
>
> $for(header-includes)$
> $header-includes$
>
> ...
>
> $if(title)$
> <text:p text:style-name="Title">$title$</text:p>
> $endif$
> $if(subtitle)$
> <text:p text:style-name="Subtitle">$subtitle$</text:p>
> $endif$
>
>
> - -----------------------
>
> The odt book title is of type 'Title', and the chapter titles are of type
> 'Subtitle'. Subheadings are of type 'Header 3'. But instead of getting chapter
> headings I get eg:
>
> \protect\hypertarget{anchor-4}{}{}Preface
>
> Perhaps someone could explain.
>
> Many thanks,
>
> Ian
>
>
> On 15/05/2023 20:26, Ian Fantom wrote:
>
> Well the .odt file uses styles from Writer: Title, Subtitle, Header3.
>
> Would looking up the code used in the .fodt help?
>
> Ian
>
>
> On 15 May 2023 18:15:06 BST, BPJ [2]<bpj-J3H7GcXPSITLoDKTGw+V6w@public.gmane.org> wrote:
>
> Probably whoever wrote the ODT file faked the headings by enlarging the
> font and applying bold font rather than applying the "Heading 1" etc
> named paragraph styles. Only the latter will be recognised as headings
> by Pandoc. There are a lot of such files in the wild.
>
> Den mån 15 maj 2023 18:35Ian Fantom <[3]ian-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org> skrev:
>
> I've tried converting a book in .odt (LibreOffice Writer / Ubuntu)
> to
> .tex and viewing it in Texstudio.
>
> It's not converting any of the headings and subheadings - just
> producing
> normal text. I used the '-s' and the '-o' options.
>
> I think there must be something I haven't understood in the Pandoc
> User
> Guide ([4]https://pandoc.org/MANUAL.html)
>
> I was expecting some way of defining a conversion table from Writer
> to
> Latex. For instance:
>
> 'Preface' is in style 'subtitle' in Writer, and is converted to:
> '\protect\hypertarget{anchor-4}{}{}Preface' and appears as normal
> text
> in .tex.
>
> Any ideas how I should proceed?
>
> Thanks, Ian Fantom
>
>
> --
> You received this message because you are subscribed to the Google
> Groups "pandoc-discuss" group.
> To unsubscribe from this group and stop receiving emails from it,
> send an email to [5]pandoc-discuss+unsubscribe@googlegroups.com.
> To view this discussion on the web visit [6]https://
> groups.google.com/d/msgid/pandoc-discuss/
> 1201761b-53e9-f3bc-a6b5-4eedaf3b5146%40fantom.org.uk.
>
> --
> You received this message because you are subscribed to the Google Groups
> "pandoc-discuss" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to [7]pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
> To view this discussion on the web visit [8]https://groups.google.com/d/
> msgid/pandoc-discuss/3BA7371B-D3AC-43A2-B8E3-C6FAB0A977E4%40fantom.org.uk.
>
> --
> You received this message because you are subscribed to the Google Groups
> "pandoc-discuss" group.
> To unsubscribe from this group and stop receiving emails from it, send an email
> to [9]pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
> To view this discussion on the web visit [10]https://groups.google.com/d/msgid/
> pandoc-discuss/7316b85d-27a0-abf5-1e0b-09e0c40186fd%40fantom.org.uk.
>
> References:
>
> [1] https://pandoc.org/chunkedhtml-demo/6-templates.html
> [2] mailto:bpj-J3H7GcXPSITLoDKTGw+V6w@public.gmane.org
> [3] mailto:ian-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org
> [4] https://pandoc.org/MANUAL.html
> [5] mailto:pandoc-discuss%2Bunsubscribe-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
> [6] https://groups.google.com/d/msgid/pandoc-discuss/1201761b-53e9-f3bc-a6b5-4eedaf3b5146%40fantom.org.uk
> [7] mailto:pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
> [8] https://groups.google.com/d/msgid/pandoc-discuss/3BA7371B-D3AC-43A2-B8E3-C6FAB0A977E4%40fantom.org.uk?utm_medium=email&utm_source=footer
> [9] mailto:pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
> [10] https://groups.google.com/d/msgid/pandoc-discuss/7316b85d-27a0-abf5-1e0b-09e0c40186fd%40fantom.org.uk?utm_medium=email&utm_source=footer
--
You received this message because you are subscribed to the Google Groups "pandoc-discuss" group.
To unsubscribe from this group and stop receiving emails from it, send an email to pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
To view this discussion on the web visit https://groups.google.com/d/msgid/pandoc-discuss/ZGNiA4yZCZI07UYs%40localhost.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Converting headings (.odt -> .tex)
2023-05-16 10:59 ` Bastien DUMONT
@ 2023-05-16 15:09 ` Ian Fantom
[not found] ` <df607dbb-adfd-e034-7f88-0510ecdfdc3a-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org>
0 siblings, 1 reply; 10+ messages in thread
From: Ian Fantom @ 2023-05-16 15:09 UTC (permalink / raw)
To: pandoc-discuss-/JYPxA39Uh5TLH3MbocFFw
Thanks. Is that
libreoffice --metadata-file
I'm not getting anything.
Ian
On 16/05/2023 11:59, Bastien DUMONT wrote:
> Indeed, Pandoc does not seem to extract the title and the subtitle. I just created an ODT file with the following body:
>
> ```
> <text:p text:style-name="Title">Title</text:p>
> <text:p text:style-name="Subtitle">subtitle</text:p>
> <text:p text:style-name="P1"/>
> <text:h text:style-name="Heading_20_3" text:outline-level="3">A header</text:h>
> ```
>
> The two first elements are handled as normal paragraph. However, the last element is correctly read as a header level 3.
>
> You could set the title and the subtitle in a metadata file (called with --metadata-file) and remove them from your odt file. As for your headers, we cannot know why Pandoc does not recognize them without looking into your file (are, better, a sample of your file reduced to the strict minimum).
>
> To get the default file for LaTeX, run pandoc -D latex.
>
> Le Tuesday 16 May 2023 à 11:32:32AM, Ian Fantom a écrit :
>> I'm still puzzled on how the correspondences work. I must be misunderstanding
>> something in the Manual ([1]https://pandoc.org/chunkedhtml-demo/
>> 6-templates.html).
>>
>> If I enter 'pandoc -D odt' then I get the contents of the default file for odt,
>> but if I enter 'pandoc -D tex' I get "Could not find data file templates/
>> default.tex".
>>
>> The odt default file contains the lines:
>>
>> - ---------------
>>
>> $for(header-includes)$
>> $header-includes$
>>
>> ...
>>
>> $if(title)$
>> <text:p text:style-name="Title">$title$</text:p>
>> $endif$
>> $if(subtitle)$
>> <text:p text:style-name="Subtitle">$subtitle$</text:p>
>> $endif$
>>
>>
>> - -----------------------
>>
>> The odt book title is of type 'Title', and the chapter titles are of type
>> 'Subtitle'. Subheadings are of type 'Header 3'. But instead of getting chapter
>> headings I get eg:
>>
>> \protect\hypertarget{anchor-4}{}{}Preface
>>
>> Perhaps someone could explain.
>>
>> Many thanks,
>>
>> Ian
>>
>>
>> On 15/05/2023 20:26, Ian Fantom wrote:
>>
>> Well the .odt file uses styles from Writer: Title, Subtitle, Header3.
>>
>> Would looking up the code used in the .fodt help?
>>
>> Ian
>>
>>
>> On 15 May 2023 18:15:06 BST, BPJ [2]<bpj-J3H7GcXPSITLoDKTGw+V6w@public.gmane.org> wrote:
>>
>> Probably whoever wrote the ODT file faked the headings by enlarging the
>> font and applying bold font rather than applying the "Heading 1" etc
>> named paragraph styles. Only the latter will be recognised as headings
>> by Pandoc. There are a lot of such files in the wild.
>>
>> Den mån 15 maj 2023 18:35Ian Fantom <[3]ian-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org> skrev:
>>
>> I've tried converting a book in .odt (LibreOffice Writer / Ubuntu)
>> to
>> .tex and viewing it in Texstudio.
>>
>> It's not converting any of the headings and subheadings - just
>> producing
>> normal text. I used the '-s' and the '-o' options.
>>
>> I think there must be something I haven't understood in the Pandoc
>> User
>> Guide ([4]https://pandoc.org/MANUAL.html)
>>
>> I was expecting some way of defining a conversion table from Writer
>> to
>> Latex. For instance:
>>
>> 'Preface' is in style 'subtitle' in Writer, and is converted to:
>> '\protect\hypertarget{anchor-4}{}{}Preface' and appears as normal
>> text
>> in .tex.
>>
>> Any ideas how I should proceed?
>>
>> Thanks, Ian Fantom
>>
>>
>> --
>> You received this message because you are subscribed to the Google
>> Groups "pandoc-discuss" group.
>> To unsubscribe from this group and stop receiving emails from it,
>> send an email to [5]pandoc-discuss+unsubscribe@googlegroups.com.
>> To view this discussion on the web visit [6]https://
>> groups.google.com/d/msgid/pandoc-discuss/
>> 1201761b-53e9-f3bc-a6b5-4eedaf3b5146%40fantom.org.uk.
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "pandoc-discuss" group.
>> To unsubscribe from this group and stop receiving emails from it, send an
>> email to [7]pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
>> To view this discussion on the web visit [8]https://groups.google.com/d/
>> msgid/pandoc-discuss/3BA7371B-D3AC-43A2-B8E3-C6FAB0A977E4%40fantom.org.uk.
>>
>> --
>> You received this message because you are subscribed to the Google Groups
>> "pandoc-discuss" group.
>> To unsubscribe from this group and stop receiving emails from it, send an email
>> to [9]pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
>> To view this discussion on the web visit [10]https://groups.google.com/d/msgid/
>> pandoc-discuss/7316b85d-27a0-abf5-1e0b-09e0c40186fd%40fantom.org.uk.
>>
>> References:
>>
>> [1] https://pandoc.org/chunkedhtml-demo/6-templates.html
>> [2] mailto:bpj-J3H7GcXPSITLoDKTGw+V6w@public.gmane.org
>> [3] mailto:ian-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org
>> [4] https://pandoc.org/MANUAL.html
>> [5] mailto:pandoc-discuss%2Bunsubscribe-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
>> [6] https://groups.google.com/d/msgid/pandoc-discuss/1201761b-53e9-f3bc-a6b5-4eedaf3b5146%40fantom.org.uk
>> [7] mailto:pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
>> [8] https://groups.google.com/d/msgid/pandoc-discuss/3BA7371B-D3AC-43A2-B8E3-C6FAB0A977E4%40fantom.org.uk?utm_medium=email&utm_source=footer
>> [9] mailto:pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
>> [10] https://groups.google.com/d/msgid/pandoc-discuss/7316b85d-27a0-abf5-1e0b-09e0c40186fd%40fantom.org.uk?utm_medium=email&utm_source=footer
--
You received this message because you are subscribed to the Google Groups "pandoc-discuss" group.
To unsubscribe from this group and stop receiving emails from it, send an email to pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
To view this discussion on the web visit https://groups.google.com/d/msgid/pandoc-discuss/df607dbb-adfd-e034-7f88-0510ecdfdc3a%40fantom.org.uk.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Converting headings (.odt -> .tex)
[not found] ` <df607dbb-adfd-e034-7f88-0510ecdfdc3a-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org>
@ 2023-05-16 15:18 ` Bastien DUMONT
2023-05-16 15:24 ` BPJ
1 sibling, 0 replies; 10+ messages in thread
From: Bastien DUMONT @ 2023-05-16 15:18 UTC (permalink / raw)
To: pandoc-discuss-/JYPxA39Uh5TLH3MbocFFw
pandoc -t latex -o your-output-file.tex --metadata-file=your-metadata-file.yaml your-source-file.odt
Le Tuesday 16 May 2023 à 04:09:18PM, Ian Fantom a écrit :
> Thanks. Is that
>
> libreoffice --metadata-file
>
> I'm not getting anything.
>
> Ian
>
> On 16/05/2023 11:59, Bastien DUMONT wrote:
> > Indeed, Pandoc does not seem to extract the title and the subtitle. I just created an ODT file with the following body:
> >
> > ```
> > <text:p text:style-name="Title">Title</text:p>
> > <text:p text:style-name="Subtitle">subtitle</text:p>
> > <text:p text:style-name="P1"/>
> > <text:h text:style-name="Heading_20_3" text:outline-level="3">A header</text:h>
> > ```
> >
> > The two first elements are handled as normal paragraph. However, the last element is correctly read as a header level 3.
> >
> > You could set the title and the subtitle in a metadata file (called with --metadata-file) and remove them from your odt file. As for your headers, we cannot know why Pandoc does not recognize them without looking into your file (are, better, a sample of your file reduced to the strict minimum).
> >
> > To get the default file for LaTeX, run pandoc -D latex.
> >
> > Le Tuesday 16 May 2023 à 11:32:32AM, Ian Fantom a écrit :
> > > I'm still puzzled on how the correspondences work. I must be misunderstanding
> > > something in the Manual ([1]https://pandoc.org/chunkedhtml-demo/
> > > 6-templates.html).
> > >
> > > If I enter 'pandoc -D odt' then I get the contents of the default file for odt,
> > > but if I enter 'pandoc -D tex' I get "Could not find data file templates/
> > > default.tex".
> > >
> > > The odt default file contains the lines:
> > >
> > > - ---------------
> > >
> > > $for(header-includes)$
> > > $header-includes$
> > >
> > > ...
> > >
> > > $if(title)$
> > > <text:p text:style-name="Title">$title$</text:p>
> > > $endif$
> > > $if(subtitle)$
> > > <text:p text:style-name="Subtitle">$subtitle$</text:p>
> > > $endif$
> > >
> > >
> > > - -----------------------
> > >
> > > The odt book title is of type 'Title', and the chapter titles are of type
> > > 'Subtitle'. Subheadings are of type 'Header 3'. But instead of getting chapter
> > > headings I get eg:
> > >
> > > \protect\hypertarget{anchor-4}{}{}Preface
> > >
> > > Perhaps someone could explain.
> > >
> > > Many thanks,
> > >
> > > Ian
> > >
> > >
> > > On 15/05/2023 20:26, Ian Fantom wrote:
> > >
> > > Well the .odt file uses styles from Writer: Title, Subtitle, Header3.
> > >
> > > Would looking up the code used in the .fodt help?
> > >
> > > Ian
> > >
> > >
> > > On 15 May 2023 18:15:06 BST, BPJ [2]<bpj-J3H7GcXPSITLoDKTGw+V6w@public.gmane.org> wrote:
> > >
> > > Probably whoever wrote the ODT file faked the headings by enlarging the
> > > font and applying bold font rather than applying the "Heading 1" etc
> > > named paragraph styles. Only the latter will be recognised as headings
> > > by Pandoc. There are a lot of such files in the wild.
> > >
> > > Den mån 15 maj 2023 18:35Ian Fantom <[3]ian-0jttZa1E5sS4UlQgPVntAg@public.gmane.orguk> skrev:
> > >
> > > I've tried converting a book in .odt (LibreOffice Writer / Ubuntu)
> > > to
> > > .tex and viewing it in Texstudio.
> > >
> > > It's not converting any of the headings and subheadings - just
> > > producing
> > > normal text. I used the '-s' and the '-o' options.
> > >
> > > I think there must be something I haven't understood in the Pandoc
> > > User
> > > Guide ([4]https://pandoc.org/MANUAL.html)
> > >
> > > I was expecting some way of defining a conversion table from Writer
> > > to
> > > Latex. For instance:
> > >
> > > 'Preface' is in style 'subtitle' in Writer, and is converted to:
> > > '\protect\hypertarget{anchor-4}{}{}Preface' and appears as normal
> > > text
> > > in .tex.
> > >
> > > Any ideas how I should proceed?
> > >
> > > Thanks, Ian Fantom
> > >
> > >
> > > --
> > > You received this message because you are subscribed to the Google
> > > Groups "pandoc-discuss" group.
> > > To unsubscribe from this group and stop receiving emails from it,
> > > send an email to [5]pandoc-discuss+unsubscribe@googlegroups.com.
> > > To view this discussion on the web visit [6]https://
> > > groups.google.com/d/msgid/pandoc-discuss/
> > > 1201761b-53e9-f3bc-a6b5-4eedaf3b5146%40fantom.org.uk.
> > >
> > > --
> > > You received this message because you are subscribed to the Google Groups
> > > "pandoc-discuss" group.
> > > To unsubscribe from this group and stop receiving emails from it, send an
> > > email to [7]pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
> > > To view this discussion on the web visit [8]https://groups.google.com/d/
> > > msgid/pandoc-discuss/3BA7371B-D3AC-43A2-B8E3-C6FAB0A977E4%40fantom.org.uk.
> > >
> > > --
> > > You received this message because you are subscribed to the Google Groups
> > > "pandoc-discuss" group.
> > > To unsubscribe from this group and stop receiving emails from it, send an email
> > > to [9]pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
> > > To view this discussion on the web visit [10]https://groups.google.com/d/msgid/
> > > pandoc-discuss/7316b85d-27a0-abf5-1e0b-09e0c40186fd%40fantom.org.uk.
> > >
> > > References:
> > >
> > > [1] https://pandoc.org/chunkedhtml-demo/6-templates.html
> > > [2] mailto:bpj-J3H7GcXPSITLoDKTGw+V6w@public.gmane.org
> > > [3] mailto:ian-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org
> > > [4] https://pandoc.org/MANUAL.html
> > > [5] mailto:pandoc-discuss%2Bunsubscribe-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
> > > [6] https://groups.google.com/d/msgid/pandoc-discuss/1201761b-53e9-f3bc-a6b5-4eedaf3b5146%40fantom.org.uk
> > > [7] mailto:pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
> > > [8] https://groups.google.com/d/msgid/pandoc-discuss/3BA7371B-D3AC-43A2-B8E3-C6FAB0A977E4%40fantom.org.uk?utm_medium=email&utm_source=footer
> > > [9] mailto:pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
> > > [10] https://groups.google.com/d/msgid/pandoc-discuss/7316b85d-27a0-abf5-1e0b-09e0c40186fd%40fantom.org.uk?utm_medium=email&utm_source=footer
>
> --
> You received this message because you are subscribed to the Google Groups "pandoc-discuss" group.
> To unsubscribe from this group and stop receiving emails from it, send an email to pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
> To view this discussion on the web visit https://groups.google.com/d/msgid/pandoc-discuss/df607dbb-adfd-e034-7f88-0510ecdfdc3a%40fantom.org.uk.
--
You received this message because you are subscribed to the Google Groups "pandoc-discuss" group.
To unsubscribe from this group and stop receiving emails from it, send an email to pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
To view this discussion on the web visit https://groups.google.com/d/msgid/pandoc-discuss/ZGOeszZgcJiJdMNb%40localhost.
^ permalink raw reply [flat|nested] 10+ messages in thread
* Re: Converting headings (.odt -> .tex)
[not found] ` <df607dbb-adfd-e034-7f88-0510ecdfdc3a-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org>
2023-05-16 15:18 ` Bastien DUMONT
@ 2023-05-16 15:24 ` BPJ
1 sibling, 0 replies; 10+ messages in thread
From: BPJ @ 2023-05-16 15:24 UTC (permalink / raw)
To: pandoc-discuss
[-- Attachment #1: Type: text/plain, Size: 8009 bytes --]
In a text file metadata.yaml:
title: Title Text
subtitle: Subtitle Text
where obviously "Title Text" and "Subtitle Text" should be replaced with
your title and subtitle.
Then add
--metadata-file metadata.yaml
to your pandoc command line.
(The YAML file can be called anything. I used "metadata" for explanatory
purposes.)
Also you may get better results if you save the ODT file as a DOCX file in
Writer and convert from docx to latex with pandoc.
Den tis 16 maj 2023 17:10Ian Fantom <ian-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org> skrev:
> Thanks. Is that
>
> libreoffice --metadata-file
>
> I'm not getting anything.
>
> Ian
>
> On 16/05/2023 11:59, Bastien DUMONT wrote:
> > Indeed, Pandoc does not seem to extract the title and the subtitle. I
> just created an ODT file with the following body:
> >
> > ```
> > <text:p text:style-name="Title">Title</text:p>
> > <text:p text:style-name="Subtitle">subtitle</text:p>
> > <text:p text:style-name="P1"/>
> > <text:h text:style-name="Heading_20_3" text:outline-level="3">A
> header</text:h>
> > ```
> >
> > The two first elements are handled as normal paragraph. However, the
> last element is correctly read as a header level 3.
> >
> > You could set the title and the subtitle in a metadata file (called with
> --metadata-file) and remove them from your odt file. As for your headers,
> we cannot know why Pandoc does not recognize them without looking into your
> file (are, better, a sample of your file reduced to the strict minimum).
> >
> > To get the default file for LaTeX, run pandoc -D latex.
> >
> > Le Tuesday 16 May 2023 à 11:32:32AM, Ian Fantom a écrit :
> >> I'm still puzzled on how the correspondences work. I must be
> misunderstanding
> >> something in the Manual ([1]https://pandoc.org/chunkedhtml-demo/
> >> 6-templates.html).
> >>
> >> If I enter 'pandoc -D odt' then I get the contents of the default file
> for odt,
> >> but if I enter 'pandoc -D tex' I get "Could not find data file
> templates/
> >> default.tex".
> >>
> >> The odt default file contains the lines:
> >>
> >> - ---------------
> >>
> >> $for(header-includes)$
> >> $header-includes$
> >>
> >> ...
> >>
> >> $if(title)$
> >> <text:p text:style-name="Title">$title$</text:p>
> >> $endif$
> >> $if(subtitle)$
> >> <text:p text:style-name="Subtitle">$subtitle$</text:p>
> >> $endif$
> >>
> >>
> >> - -----------------------
> >>
> >> The odt book title is of type 'Title', and the chapter titles are of
> type
> >> 'Subtitle'. Subheadings are of type 'Header 3'. But instead of getting
> chapter
> >> headings I get eg:
> >>
> >> \protect\hypertarget{anchor-4}{}{}Preface
> >>
> >> Perhaps someone could explain.
> >>
> >> Many thanks,
> >>
> >> Ian
> >>
> >>
> >> On 15/05/2023 20:26, Ian Fantom wrote:
> >>
> >> Well the .odt file uses styles from Writer: Title, Subtitle,
> Header3.
> >>
> >> Would looking up the code used in the .fodt help?
> >>
> >> Ian
> >>
> >>
> >> On 15 May 2023 18:15:06 BST, BPJ [2]<bpj-J3H7GcXPSITLoDKTGw+V6w@public.gmane.org> wrote:
> >>
> >> Probably whoever wrote the ODT file faked the headings by
> enlarging the
> >> font and applying bold font rather than applying the "Heading
> 1" etc
> >> named paragraph styles. Only the latter will be recognised as
> headings
> >> by Pandoc. There are a lot of such files in the wild.
> >>
> >> Den mån 15 maj 2023 18:35Ian Fantom <[3]ian-0jttZa1E5sQhHD8HoNpTWA@public.gmane.orgk>
> skrev:
> >>
> >> I've tried converting a book in .odt (LibreOffice Writer /
> Ubuntu)
> >> to
> >> .tex and viewing it in Texstudio.
> >>
> >> It's not converting any of the headings and subheadings -
> just
> >> producing
> >> normal text. I used the '-s' and the '-o' options.
> >>
> >> I think there must be something I haven't understood in
> the Pandoc
> >> User
> >> Guide ([4]https://pandoc.org/MANUAL.html)
> >>
> >> I was expecting some way of defining a conversion table
> from Writer
> >> to
> >> Latex. For instance:
> >>
> >> 'Preface' is in style 'subtitle' in Writer, and is
> converted to:
> >> '\protect\hypertarget{anchor-4}{}{}Preface' and appears as
> normal
> >> text
> >> in .tex.
> >>
> >> Any ideas how I should proceed?
> >>
> >> Thanks, Ian Fantom
> >>
> >>
> >> --
> >> You received this message because you are subscribed to
> the Google
> >> Groups "pandoc-discuss" group.
> >> To unsubscribe from this group and stop receiving emails
> from it,
> >> send an email to [5]
> pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
> >> To view this discussion on the web visit [6]https://
> >> groups.google.com/d/msgid/pandoc-discuss/
> >> 1201761b-53e9-f3bc-a6b5-4eedaf3b5146%40fantom.org.uk.
> >>
> >> --
> >> You received this message because you are subscribed to the Google
> Groups
> >> "pandoc-discuss" group.
> >> To unsubscribe from this group and stop receiving emails from it,
> send an
> >> email to [7]pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
> >> To view this discussion on the web visit [8]
> https://groups.google.com/d/
> >> msgid/pandoc-discuss/3BA7371B-D3AC-43A2-B8E3-C6FAB0A977E4%
> 40fantom.org.uk.
> >>
> >> --
> >> You received this message because you are subscribed to the Google
> Groups
> >> "pandoc-discuss" group.
> >> To unsubscribe from this group and stop receiving emails from it, send
> an email
> >> to [9]pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
> >> To view this discussion on the web visit [10]
> https://groups.google.com/d/msgid/
> >> pandoc-discuss/7316b85d-27a0-abf5-1e0b-09e0c40186fd%40fantom.org.uk.
> >>
> >> References:
> >>
> >> [1] https://pandoc.org/chunkedhtml-demo/6-templates.html
> >> [2] mailto:bpj-J3H7GcXPSITLoDKTGw+V6w@public.gmane.org
> >> [3] mailto:ian-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org
> >> [4] https://pandoc.org/MANUAL.html
> >> [5] mailto:pandoc-discuss%2Bunsubscribe-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
> >> [6]
> https://groups.google.com/d/msgid/pandoc-discuss/1201761b-53e9-f3bc-a6b5-4eedaf3b5146%40fantom.org.uk
> >> [7] mailto:pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
> >> [8]
> https://groups.google.com/d/msgid/pandoc-discuss/3BA7371B-D3AC-43A2-B8E3-C6FAB0A977E4%40fantom.org.uk?utm_medium=email&utm_source=footer
> >> [9] mailto:pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFFw@public.gmane.org
> >> [10]
> https://groups.google.com/d/msgid/pandoc-discuss/7316b85d-27a0-abf5-1e0b-09e0c40186fd%40fantom.org.uk?utm_medium=email&utm_source=footer
>
> --
> You received this message because you are subscribed to the Google Groups
> "pandoc-discuss" group.
> To unsubscribe from this group and stop receiving emails from it, send an
> email to pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
> To view this discussion on the web visit
> https://groups.google.com/d/msgid/pandoc-discuss/df607dbb-adfd-e034-7f88-0510ecdfdc3a%40fantom.org.uk
> .
>
--
You received this message because you are subscribed to the Google Groups "pandoc-discuss" group.
To unsubscribe from this group and stop receiving emails from it, send an email to pandoc-discuss+unsubscribe-/JYPxA39Uh5TLH3MbocFF+G/Ez6ZCGd0@public.gmane.org
To view this discussion on the web visit https://groups.google.com/d/msgid/pandoc-discuss/CADAJKhCnDBnRthrhr_KZnqmEoScyqke1pmfH6okgi6XCZzDOew%40mail.gmail.com.
[-- Attachment #2: Type: text/html, Size: 13484 bytes --]
^ permalink raw reply [flat|nested] 10+ messages in thread
end of thread, other threads:[~2023-05-16 15:24 UTC | newest]
Thread overview: 10+ messages (download: mbox.gz / follow: Atom feed)
-- links below jump to the message on this page --
2023-05-15 16:34 Converting headings (.odt -> .tex) Ian Fantom
[not found] ` <1201761b-53e9-f3bc-a6b5-4eedaf3b5146-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org>
2023-05-15 17:15 ` BPJ
[not found] ` <CADAJKhBLFXzYf_mNc+uZ2Ur+1kYn3zpgBR7B7tFqjOWaAGCiRQ-JsoAwUIsXosN+BqQ9rBEUg@public.gmane.org>
2023-05-15 19:26 ` Ian Fantom
[not found] ` <3BA7371B-D3AC-43A2-B8E3-C6FAB0A977E4-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org>
2023-05-16 10:32 ` Ian Fantom
[not found] ` <7316b85d-27a0-abf5-1e0b-09e0c40186fd-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org>
2023-05-16 10:59 ` Bastien DUMONT
2023-05-16 15:09 ` Ian Fantom
[not found] ` <df607dbb-adfd-e034-7f88-0510ecdfdc3a-0jttZa1E5sTe9xe1eoZjHA@public.gmane.org>
2023-05-16 15:18 ` Bastien DUMONT
2023-05-16 15:24 ` BPJ
2023-05-15 17:18 ` Bastien DUMONT
2023-05-15 19:20 ` Ian Fantom
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).