From mboxrd@z Thu Jan 1 00:00:00 1970 From: Robertdkeys@aol.com (Robertdkeys@aol.com) Date: Tue, 15 Mar 2005 18:33:11 EST Subject: [TUHS] Got old MVII critter and wanna bring up a 4.3BSD family thingy.....but no tape.. Message-ID: <1a7.33a2c76b.2f68cab7@aol.com> Having fallen into that trap of another one dollar vax.....of the Qbus variety, and, wanting to try to bring up another round of some sort of 4.3BSD related thingy, but, with no tape drive or tape cartridges, can anyone come up with a dd'able root image that is known to work on an MVII critter, AND, have a footprint of 1mb or less (i.e., a disklabel of only 1mb size or less)? Sadly, all my tapes have decomposed to dust, and I am down to one questionable TK50 tape drive. I can get a boot of the Quasijarus boot, off a floppy, but it won't read a miniroot that was dd'd onto a swap partition correctly. I can boot a NetBSD 1.4.1 and work back to a NetBSD-1.0A which is usable to unroll file systems onto a drive, but, it won't boot the kernel correctly into a 4.3BSDish system. I still need the correct boot blocks and boots. I did try an image from vaxpower's root, and that booted and ran mostly OK, but, it had a label set up for a 4 gig drive, and my controller has early enough proms that it won't handle anything larger than a 1 gb drive. I tried a couple of other images from here and there, but the boot blocks are not quite right to run on my vax. So, anyone have handy a dd'able root with boot blocks, set up for a 1gb or smaller drive, that is known to work on an MVII critter for some flavor of 4.3BSD (4.3, Tahoe, Reno, Quasijarus) that I could use to get my machine up? The only constraints on the image are that it must have a label set up for a 1gb or smaller drive, and it must have a usable ftp from usr/bin dropped into bin, so I can ftp in the rest of the system after booting up the root image. One other thought might be to create a bootable dd image with a root only system that contains all the requisite user bits on say a 100mb or so root file system. That is non-standard, from the traditionalists point of view, but, at least the system would come up essentially running, and complete. It could then be partitioned and cloned off onto a standardly partitioned drive, as a next step. Like a fool, the last time I ran the system, about 5 years ago, I religiously copied off all the bits onto cd, except for a dd'able boot/root image... drat! Kick, Kick, Kick... etc.....(:+{{..... Any pointers to such an image, or anyone that has a system up that might create me such an image, would be greatly appreciated. With the EOL of many tapes at hand, I suspect that it may be the only good way to bring up a 4.3BSDish system on a Qbus box, and we might should save up a such usable image in the TUHS archives. Thanks Bob Keys -------------- next part -------------- An HTML attachment was scrubbed... URL: