* [pups] What hard drives to look for for PDP-11 use?
[not found] <200010120307.UAA26966@moe.2bsd.com>
@ 2000-10-12 18:14 ` rdkeys
0 siblings, 0 replies; 2+ messages in thread
From: rdkeys @ 2000-10-12 18:14 UTC (permalink / raw)
[-- Warning: decoded text below may be mangled, UTF-8 assumed --]
[-- Attachment #1: Type: text/plain, Size: 12291 bytes --]
> Hi Bob -
Hello.....
> > From: rdkeys at unity.ncsu.edu
> > Steven.... I have been thinking of trying to find a PDP-11 of some sort
> > (like hunting for needles in a hay stack in this part of the woods, but
>
> Interesting. I wouldn't have thought an 11/73 or similar would
> be too hard to find.
Most of the PDP stuff has long since been surplussed, and I have trolled
the local newsfeeds but nothing seems to turn up. VAXen are the usual
fare, since PDP's were not that common around here. The RTP NC area did
not really get big into computering until the VAX era.
> > 1. What mfm hard drives from the non-DEC world could be adapted to
> > work on a PDP-11?
>
> Tim has already jumped in with a pointer or two.
>
> > 2. Can any scsi drives be used (RZ-23's or that kind of thing?).
>
> Oh yes! But you need to have a Qbus SCSI<->MSCP controller. They
> are easy to _find_ but quite *expensive*. Not as expensive as
> they were when I shelled out US$1500 for a new Emulex UC08 (and that
> with a good discount - the sales person was sympathetic to my
> explanation this was for a 'hobby'). Used CMD, Emulex or Dilog
> controllers will run around $500-900.
I fell into a MVII yesterday that has a Dilog controller. Is that the
one you are talking about? If so, that could be a lucky find.
Here's a crazy, but possible thought.... can I write 211BSD drives from
a MicroVAX II and move the card/drives over to the PDP-11 and have a
reasonable expectation that they will work, or at least boot to a root
or a miniroot or such? It is a long shot, but if I am just dd'ing
images, it might work, I would think.
One of my goals with the MVII is to use it to write 9 track tapes, IFF
I can lay hands on one of several 9 trackkers in surplus in the next
few weeks. They were originally used on a local VAXsystem 5400 crate
and are single ended scsi Ciphers. Could they be used on a PDP-11, too?
> Once you have gotten over the sticker/exchequer shock the upside
> is that you can use about many SCSI disk or tape drives that other
> folks are tossing otu because they're too small. The older ~300MB
> and 1GB disks that are not useful on modern systems are great in
> a PDP-11 environment. Uh, don't bother putting a 73GB Cheetah
> on an 11 ;)
I have plenty of the RZ55/56/57/58ish things that have popped up in
surplus that I am using on my VAXstation toyz. All the PeeCee types
avoid them like the plague, and I truck them out by the handfull.
MooU was big on those and DS5000/200 crates. They are now hitting
surplus quite frequently.
> One place that lists CMD and Emulex controllers is:
>
> http://www.ficompinc.com
>
> > I will assume the target OS is 2.11BSD or 2.9BSD, since those seem
> > to handle the greatest assortment of hardware types.
> >
> > Can any of these non-DEC drives be adapted to MVII use?
>
> At one time I had a uVax-II with a Dilog DQ696 (I think that was
> the model number) that had a couple ESDI drives on it - a ~300MB
> Miniscribe disk and a couple Maxtor RD53 sized drives.
I had one of those, too, a few months back, but stripped the MVI it came
out of, without thinking of hanging onto that card. Minus two points for
me. Someone else was lucky that day.....(:+}}...
> > Can any of the early MFM or ESDI Sun drives be used?
>
> Definitely. Emulex QD33 and QD35 adaptors (in addition to the
> Dilog DQ696) ring a bell as far as non-SCSI disks go.
I have half a dozen of these early Sun drives in storage, so that is
good to know, and I did save the 650mb esdi drive from the MVI, thinking
I could use it on a Sun, but never got around to it.
> Steven Schultz
> sms at moe.2bsd.com
Thanks for the tidbits folks!
Bob
Received: (from major at localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id JAA06738
for pups-liszt; Fri, 13 Oct 2000 09:51:38 +1100 (EST)
(envelope-from owner-pups at minnie.cs.adfa.edu.au)
Received: from henry.cs.adfa.edu.au (henry.cs.adfa.edu.au [131.236.21.158])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id JAA06734
for <pups at minnie.cs.adfa.edu.au>; Fri, 13 Oct 2000 09:51:36 +1100 (EST)
(envelope-from wkt at henry.cs.adfa.edu.au)
Received: (from wkt at localhost)
by henry.cs.adfa.edu.au (8.9.3/8.9.3) id JAA93998
for pups at minnie.cs.adfa.edu.au; Fri, 13 Oct 2000 09:52:37 +1100 (EST)
(envelope-from wkt)
Received: from post.mail.nl.demon.net (post-10.mail.nl.demon.net [194.159.73.20])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id HAA05927
for <pups at minnie.cs.adfa.edu.au>; Fri, 13 Oct 2000 07:02:30 +1100 (EST)
(envelope-from wkb at freebie.demon.nl)
Received: from [212.238.54.101] (helo=freebie.demon.nl)
by post.mail.nl.demon.net with smtp (Exim 3.14 #2)
id 13joXg-0003AX-00; Thu, 12 Oct 2000 20:01:28 +0000
Received: (from wkb at localhost)
by freebie.demon.nl (8.11.0/8.11.0) id e9C8B6o18660;
Thu, 12 Oct 2000 10:11:06 +0200 (CEST)
(envelope-from wkb)
Date: Thu, 12 Oct 2000 10:11:06 +0200
From: Wilko Bulte <wkb@freebie.demon.nl>
To: rdkeys at unity.ncsu.edu
Cc: "Steven M. Schultz" <sms at moe.2bsd.com>, pups at minnie.cs.adfa.edu.au
Subject: Re: [pups] What hard drives to look for for PDP-11 use?
Message-ID: <20001012101105.B18613 at freebie.demon.nl>
References: <200010110012.RAA13052 at moe.2bsd.com> <200010111429.KAA23987 at uni04du.unity.ncsu.edu>
Mime-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Disposition: inline
User-Agent: Mutt/1.2i
In-Reply-To: <200010111429.KAA23987 at uni04du.unity.ncsu.edu>; from rdkeys at unity.ncsu.edu on Wed, Oct 11, 2000 at 10:29:18AM -0400
X-OS: FreeBSD 4.1-STABLE
X-PGP: finger wilko at freebsd.org
Sender: owner-pups at minnie.cs.adfa.edu.au
Precedence: bulk
On Wed, Oct 11, 2000 at 10:29:18AM -0400, rdkeys at unity.ncsu.edu wrote:
> > It is going to take some creative symlink and mount point work to
> > fit 2.11 into 20MB disks - the system really expects to have ~80MB
> > at least for /usr. An RD54 at 159MB is more than enough but a RD53
> > paired with a couple RD32/3 would be adequate.
> >
> > Steven Schultz
> > sms at to.gd-es.com
>
> Steven.... I have been thinking of trying to find a PDP-11 of some sort
> (like hunting for needles in a hay stack in this part of the woods, but
> maybe something will surface). Anyway... for the sake of discussion,
> and general dumpster diving knowledge....
>
> 1. What mfm hard drives from the non-DEC world could be adapted to
> work on a PDP-11?
RD53 is a Micropolis 1375 (eh, no the MFM variant of it.. 75 is SCSI.
Maybe 1325??).
RD54 is a Maxtor or Newbury data drive.
I can look up the details if needed. As far as MFM drives go I would not
consider anything smaller than a 53.
--
Wilko Bulte
wilko at freebsd.org Arnhem, the Netherlands
Received: (from major at localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id JAA06732
for pups-liszt; Fri, 13 Oct 2000 09:51:34 +1100 (EST)
(envelope-from owner-pups at minnie.cs.adfa.edu.au)
Received: from henry.cs.adfa.edu.au (henry.cs.adfa.edu.au [131.236.21.158])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id JAA06728
for <pups at minnie.cs.adfa.edu.au>; Fri, 13 Oct 2000 09:51:32 +1100 (EST)
(envelope-from wkt at henry.cs.adfa.edu.au)
Received: (from wkt at localhost)
by henry.cs.adfa.edu.au (8.9.3/8.9.3) id JAA93992
for pups at minnie.cs.adfa.edu.au; Fri, 13 Oct 2000 09:52:33 +1100 (EST)
(envelope-from wkt)
Received: from uni01du.unity.ncsu.edu (uni01du.unity.ncsu.edu [152.1.2.65])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id FAA05351
for <pups at minnie.cs.adfa.edu.au>; Fri, 13 Oct 2000 05:24:59 +1100 (EST)
(envelope-from rdkeys at unity.ncsu.edu)
From: rdkeys@unity.ncsu.edu
Received: (from rdkeys at localhost)
by uni01du.unity.ncsu.edu (8.8.4/EC02Jan97)
id OAA23482; Thu, 12 Oct 2000 14:23:56 -0400 (EDT)
Message-Id: <200010121823.OAA23482 at uni01du.unity.ncsu.edu>
Subject: Re: [pups] What hard drives to look for for PDP-11 use?
To: allisonp at world.std.com
Date: Thu, 12 Oct 2000 14:23:56 -0400 (EDT)
Cc: pups at minnie.cs.adfa.edu.au
In-Reply-To: <Pine.SGI.3.95.1001011222653.13816A-100000 at world.std.com> from "allisonp at world.std.com" at Oct 11, 2000 10:33:35 PM
X-Mailer: ELM [version 2.5 TKL/POP PL2]
MIME-Version: 1.0
Content-Type: text/plain; charset=us-ascii
Content-Transfer-Encoding: 7bit
Sender: owner-pups at minnie.cs.adfa.edu.au
Precedence: bulk
> > 1. What mfm hard drives from the non-DEC world could be adapted to
> > work on a PDP-11?
>
> Many, any that are similar to ST225(RD31) and ST251(RD32) or have the same
> CHS as RD52 (Quantum D540), MIcropolus 1325(rd53) or Maxtor2190(rd54).
> Those disks were DEC baged but not DEC made and are findable. there are
> many similar out there as well.
Oh, stupid me... I cleaned up the junk pile a couple of months back
and not thinking threw out about 20 of these mfm critters, not thinking
they were much usable, any more. I did save a couple of the 150mb
mfm things from the Sun3 crate, though. They were Micropolis, if
memory is correct. All the 20/30/40/60/80mb things I chucked.
Oh well.
On the ESDI drives, has anyone tried the IBM things from Model 60
and Model 80 machines? They were 70/115/300mb drives, and are
quite common. If they were usable, I have bunches of those that
have not yet been thrown out. They are also quite numerous in
local surplus.
Bob
Received: (from major at localhost)
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id LAA07195
for pups-liszt; Fri, 13 Oct 2000 11:09:05 +1100 (EST)
(envelope-from owner-pups at minnie.cs.adfa.edu.au)
Received: from henry.cs.adfa.edu.au (henry.cs.adfa.edu.au [131.236.21.158])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id LAA07191
for <pups at minnie.cs.adfa.edu.au>; Fri, 13 Oct 2000 11:09:03 +1100 (EST)
(envelope-from wkt at henry.cs.adfa.edu.au)
Received: (from wkt at localhost)
by henry.cs.adfa.edu.au (8.9.3/8.9.3) id LAA94390
for pups at minnie.cs.adfa.edu.au; Fri, 13 Oct 2000 11:10:04 +1100 (EST)
(envelope-from wkt)
Received: from sun.rhrk.uni-kl.de (sun.rhrk.uni-kl.de [131.246.137.50])
by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with SMTP id KAA07054
for <pups at minnie.cs.adfa.edu.au>; Fri, 13 Oct 2000 10:46:16 +1100 (EST)
(envelope-from jkunz at unixag-kl.fh-kl.de)
From: jkunz@unixag-kl.fh-kl.de
Received: from aixs1.rhrk.uni-kl.de
( exim at aixs1.rhrk.uni-kl.de [131.246.137.3] ) by sun.rhrk.uni-kl.de
id aa19879 ; 13 Oct 2000 01:45 MESZ
Received: from forelle32.wohnheim.uni-kl.de ([131.246.141.32] helo=unixag-kl.fh-kl.de)
by aixs1.rhrk.uni-kl.de with esmtp (Exim 3.03 #2)
id 13js2B-0001FE-00; Fri, 13 Oct 2000 01:45:11 +0200
Received: from unixag-kl.fh-kl.de (localhost [127.0.0.1])
by unixag-kl.fh-kl.de (8.8.8/8.8.8) with ESMTP id BAA05071;
Fri, 13 Oct 2000 01:44:39 +0200 (CEST)
Message-Id: <200010122344.BAA05071 at unixag-kl.fh-kl.de>
Date: Fri, 13 Oct 2000 01:44:38 +0200 (CEST)
Subject: Re: [pups] What hard drives to look for for PDP-11 use?
To: rdkeys at unity.ncsu.edu
cc: allisonp at world.std.com, pups at minnie.cs.adfa.edu.au
In-Reply-To: <200010121823.OAA23482 at uni01du.unity.ncsu.edu>
MIME-Version: 1.0
Content-Type: TEXT/plain; charset=iso-8859-1
Content-Transfer-Encoding: 8BIT
Sender: owner-pups at minnie.cs.adfa.edu.au
Precedence: bulk
On 12 Oct, rdkeys at unity.ncsu.edu wrote:
> On the ESDI drives, has anyone tried the IBM things from Model 60
> and Model 80 machines?
I am using Micropolis 1654-7 (150MB), 1664-7 (320MB) and Maxtor XT4380
(350MB) ESDI drives from PCs and Apollo Domain DN3X00 Machines with a
Dilog DQ686 QBus MSCP controller. Last week I salvaged a XT4780 (~700MB)
but did not have the time to test it. I had no problems using this
disks. After reformating them with the controller on board diag they
worked well in my MicroVAX II. I expect no problems with it when I
convert the VAX to a PDP11/23.
The problem with some IBM PS/2 ESDI drives is the proprietary
connector, that combinates signal and power lines in one connector.
I don't know if they are usable with a normal ESDI controller. On the
other hand: In my PS/2 80 is the same Maxtor XT4380 like the one from
Apollo I am using with the Dilog.
--
tsch��,
Jochen
Homepage: http://www.unixag-kl.fh-kl.de/~jkunz/
^ permalink raw reply [flat|nested] 2+ messages in thread