From mboxrd@z Thu Jan 1 00:00:00 1970 From: jnc@mercury.lcs.mit.edu (Noel Chiappa) Date: Sun, 8 Feb 2015 15:42:07 -0500 (EST) Subject: [TUHS] 2.9BSD on an actual rl02 - swap confusion Message-ID: <20150208204207.7860218C0BE@mercury.lcs.mit.edu> > From: Jacob Ritorto > I'm having trouble understanding how to get my swap configured. Since > rl02s are so little, the MAKE file in /dev doesn't partition them into > a, b, c, etc. However, when MAKE makes the /dev/rl0 device, it uses > only 8500 of its 10000 blocks, so what would presumably be intended as > swap space does exist. Swap is usually linked to the b partition, > right? So how do I create this b partition on an rl02? I don't know how the later systems work, but in V6, the swap device, and the start block / # of blocks are specified in the c.c configuration file (i.e. they are compiled into the system). So you can take one partition, and by specifying less than the full size to 'mkfs', you can use the end of the partition for swap space (which is presumably what's happening with /dev/rl0 here). Noel