From mboxrd@z Thu Jan 1 00:00:00 1970 From: toby@smartgames.ca (Toby Thain) Date: Thu, 23 Mar 2006 17:43:20 -0500 Subject: [pups] Supnik Emulator on Redhat Linux In-Reply-To: <001c01c64eb4$0c07dec0$0202a8c0@robinslaptop> References: <001c01c64eb4$0c07dec0$0202a8c0@robinslaptop> Message-ID: <240321E8-83E3-499A-80BB-DC628E545BEB@smartgames.ca> On 23-Mar-06, at 2:57 PM, Robin wrote: > Ah, > > That’s a good suggestion. I’ll dig my way round the redhat config > stuff and see if I can find one to switch off. > > Look at "iptables". --Toby > > > Robin > > > > From: Toby Thain [mailto:toby at smartgames.ca] > Sent: 23 March 2006 06:37 > To: robinb at ruffnready.co.uk > Subject: Re: [pups] Supnik Emulator on Redhat Linux > > > > > > On 20-Mar-06, at 1:54 PM, Robin wrote: > > > > > Hi, > > I have successfully got the supnik emulator up and running on > redhat but have hit a problem, which is probably configuration and > serves to show how little I know about more recent unices. > > > > To allow computer to emulator comms I have installed a second card > and enabled it under linux. It is enabled with a different address > to the first one 192.168.1.10 and 192.168.1.11. The emulator can > see both of the devices and I have attached device 1 (eth1) as xq0. > > > > I run up BSD2.11 on the emulator and it attaches to the ether > device at start up. > > > > I can ftp from the emulator to the host and back again if I start > ftp on the emulator. > > > > I can’t telnet to the host. > > > > I can’t telnet from the host to the emulator. > > > > I can’t ftp from the host to the emulator. > > > > I also can’t telnet in from a telnet session to the listening > socket set up for a DZ11 (I could before I started trying to get > the networking up). > > > > Ideas anyone? > > > > > > Sounds like firewall to me. > > > > --Toby > > > > > > > Robin > > _______________________________________________ > > PUPS mailing list > > PUPS at minnie.tuhs.org > > http://minnie.tuhs.org/mailman/listinfo/pups > > > > -------------- next part -------------- An HTML attachment was scrubbed... URL: