From mboxrd@z Thu Jan 1 00:00:00 1970 From: Fred.van.Kempen@microwalt.nl (Fred N. van Kempen) Date: Mon, 4 Feb 2002 18:36:47 +0100 Subject: [pups] Problems booting PDP11/40 using vtserver Message-ID: <6F63E31101C6D41196490008C7B2BFC304B403@mwnt4.microwalt.nl> .. and I'm actually still alive, although only barely... :) I'll respond to Michael in email, and summarize here.. --f > -----Original Message----- > From: Warren Toomey [mailto:wkt at minnie.tuhs.org] > Sent: maandag 28 januari 2002 23:09 > To: Michael Werner > Cc: PUPS mailing list > Subject: Re: [pups] Problems booting PDP11/40 using vtserver > > > In article by Michael Werner: > > I have my PDP11/40 connected to a MicroVAX 2 (running NetBSD/vax > > 1.5.2) via serial line and want to boot a 2.9BSD or 2.11BSD > using the > > vtserver software. > > When I toggle in vtserver's boot code, the first file is > being loaded > > correctly by the PDP. Then, following the instructions in vtserver > > documentation, the serial line should be used as a serial > console - and > > some text should appear! And this is the problem: I don't > get any output. > > So, my question: Does anybody know what's going wrong here? > > Thanks in advance - Michi > > I've passed the baton of Vtserver development over to Fred van Kempen. > However, which version of Vtserver are you using? > > Cheers, > Warren > _______________________________________________ > PUPS mailing list > PUPS at minnie.tuhs.org > http://minnie.tuhs.org/mailman/listinfo/pups > InterNetworking en Network Security Consultant MicroWalt Corporation (Netherlands), Korte Heul 95, 1403 ND BUSSUM Phone +31 (35) 6980059 FAX +31 (35) 6980215 http://WWW.MicroWalt.NL/ Dit bericht en eventuele bijlagen is uitsluitend bestemd voor de geadresseerde. Openbaarmaking, vermenigvuldiging, verspreiding aan derden is niet toegestaan. Er wordt geen verantwoordelijkheid genomen voor de juiste en volledige overbrenging van de inhoud van dit bericht, noch voor de tijdige ontvangst ervan.