From mboxrd@z Thu Jan 1 00:00:00 1970 From: iking@microsoft.com (Ian King) Date: Mon, 29 Jan 2001 09:08:59 -0800 Subject: [pups] Help! Standalone DZ-11 driver Message-ID: <8D25F244B8274141B5D313CA4823F39C018EEB00@red-msg-06.redmond.corp.microsoft.com> Warren, I have the DZ-11 docs; I'll scan the relevant sections and mail it to you. -- Ian -----Original Message----- From: Warren Toomey [mailto:wkt@henry.cs.adfa.edu.au] Sent: Sunday, January 28, 2001 5:25 PM To: PDP-11 Unix Preservation Society Subject: [pups] Help! Standalone DZ-11 driver Hi all, I'm working on a new version of my Vtserver, which allows a PDP-11 with no tape drive to boot from a Unix/Linux server (via serial cable) and install a UNIX. See ftp://minnie.cs.adfa.edu.au/pub/PDP-11/Vtserver At present I'm working on a new version which uses the 2.11BSD boot code so as to support more disk drives. The work in progress is at: http://minnie.cs.adfa.edu.au/Vtserver. At present it's not usable unless you have a PDP-11/45. I've got a potential user with an 11/34, two RK05s and a DZ-11. I can't find any details of DZ-11 here in my peripherals handbooks, and the 2.11 kernel drivers are a bit too complicated to read. My existing KL-11 driver is below. Can someone come up with a standalone equivalent for a DZ-11, or point me at some docs? I'll be away from 1st to 14th Feb, so there may be some delays in responding. Thanks all, Warren struct vtdevice { int rcsr,rbuf; int tcsr,tbuf; }; #define NVT 2 struct vtdevice *VTcsr[NVT + 1] = { (struct vtdevice *)0176500, /* We use VTcsr[0] unit 1 */ (struct vtdevice *)0, (struct vtdevice *)-1 }; /* Get a character, or timeout and return with hitim zero */ char vtgetc() { register c; VTcsr[0]->rcsr = 1; hitim=3; lotim=65535; while ((VTcsr[0]->rcsr&0200)==0) { lotim--; if (lotim==0) hitim--; if (hitim==0) { putchar('t'); return(0); } } c = VTcsr[0]->rbuf; return(c); } vtputc(c) register c; { register s; while((VTcsr[0]->tcsr&0200) == 0) ; s = VTcsr[0]->tcsr; VTcsr[0]->tcsr = 0; VTcsr[0]->tbuf = c; VTcsr[0]->tcsr = s; } Received: (from major at localhost) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id JAA24991 for pups-liszt; Wed, 31 Jan 2001 09:17:28 +1100 (EST) (envelope-from owner-pups at minnie.cs.adfa.edu.au) Received: from henry.cs.adfa.edu.au (henry.cs.adfa.edu.au [131.236.21.158]) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id JAA24987 for ; Wed, 31 Jan 2001 09:17:26 +1100 (EST) (envelope-from wkt at henry.cs.adfa.edu.au) Received: (from wkt at localhost) by henry.cs.adfa.edu.au (8.11.1/8.9.3) id f0UMDUQ35508; Wed, 31 Jan 2001 09:13:30 +1100 (EST) (envelope-from wkt) From: Warren Toomey Message-Id: <200101302213.f0UMDUQ35508 at henry.cs.adfa.edu.au> Subject: Re: [pups] A bootable disk image for a PDP-11/34? In-Reply-To: <200101301820.KAA24283 at chiton.ucsd.edu> from Carl Lowenstein at "Jan 30, 2001 10:20:58 am" To: Carl Lowenstein Date: Wed, 31 Jan 2001 09:13:30 +1100 (EST) CC: pups at minnie.cs.adfa.edu.au Reply-To: wkt at cs.adfa.edu.au X-Mailer: ELM [version 2.4ME+ PL68 (25)] MIME-Version: 1.0 Content-Type: text/plain; charset=US-ASCII Content-Transfer-Encoding: 7bit Sender: owner-pups at minnie.cs.adfa.edu.au Precedence: bulk In article by Carl Lowenstein: > Just from the historical point of view, note that the first major > file on a genuine 6th Edition distribution tape _is_ a bootable > RK05 image. Something like 4000 blocks. > > carl Yes, but it doesn't boot on an 11/34 :( That's the problem. Cheers, Warren Received: (from major at localhost) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id KAA25322 for pups-liszt; Wed, 31 Jan 2001 10:28:22 +1100 (EST) (envelope-from owner-pups at minnie.cs.adfa.edu.au) Received: from mail3.microsoft.com (mail3.microsoft.com [131.107.3.123]) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with SMTP id KAA25314 for ; Wed, 31 Jan 2001 10:28:18 +1100 (EST) (envelope-from iking at microsoft.com) Received: from 157.54.9.100 by mail3.microsoft.com (InterScan E-Mail VirusWall NT); Tue, 30 Jan 2001 14:48:28 -0800 (Pacific Standard Time) Received: by inet-imc-03.redmond.corp.microsoft.com with Internet Mail Service (5.5.2653.19) id ; Tue, 30 Jan 2001 14:38:29 -0800 Message-ID: <8D25F244B8274141B5D313CA4823F39C018EEB13 at red-msg-06.redmond.corp.microsoft.com> From: Ian King To: "'Ken Wellsch'" , Carl Lowenstein Cc: pups at minnie.cs.adfa.edu.au Subject: RE: [pups] A bootable disk image for a PDP-11/34? Date: Tue, 30 Jan 2001 14:38:15 -0800 X-Mailer: Internet Mail Service (5.5.2653.19) Sender: owner-pups at minnie.cs.adfa.edu.au Precedence: bulk Ken, I tried using that image and gunzip told me there was a crc error; it wouldn't unzip it. (I downloaded it three times, just in case there was a transmission error -- twice by ftp, once by http.) I've also tried the "Dennis" images, which are supposedly straight RK05 images; E11 won't boot 'em. One issue on which I'm not clear: where is the boot address? Stuff at loc 0 doesn't look like boot instructions. If I could get an image to run in an emulator (as I mentioned, I'm running E11 from DBit), I'd write some cheesy little loader to bring it down the serial line (I already have it sketched out); but until I can at least get one to boot in the emulator, I'm reluctant to spend the hours (at 9600 baud) to spray it onto a disk. Any suggestions you may have would be greatly appreciated. -- Ian -----Original Message----- From: Ken Wellsch [mailto:kwellsch@tampabay.rr.com] Sent: Tuesday, January 30, 2001 10:30 AM To: Carl Lowenstein Cc: pups at minnie.cs.adfa.edu.au Subject: Re: [pups] A bootable disk image for a PDP-11/34? I'll second that. The V6 tape image I provided to PUPS has the usual boot blocks at the start of the tape then as I recall three RJ05 disk images. Long long ago I think I got folks interested in using emulators like Bob Supnik's by using the first tape disk image as the "disk" image for "sim" and booted V6... but it has been more than 6 years now since I did that and I may be rusty on details. -- Ken Carl Lowenstein wrote: > > Just from the historical point of view, note that the first major > file on a genuine 6th Edition distribution tape _is_ a bootable > RK05 image. Something like 4000 blocks. > > carl > > carl lowenstein marine physical lab u.c. san diego > {decvax|ucbvax} !ucsd!mpl!cdl cdl at mpl.ucsd.edu > clowenstein at ucsd.edu > > > From owner-pups at minnie.cs.adfa.edu.au Tue Jan 30 08:17 PST 2001 > > From: Ian King > > To: "'wkt at cs.adfa.edu.au'" , > > PDP-11 Unix Preservation Society > > Subject: RE: [pups] A bootable disk image for a PDP-11/34? > > Date: Mon, 29 Jan 2001 23:19:44 -0800 > > > > In fact, if someone has RK05s and isn't too far away, I'd love to get a > > bootable image on an RK05 cartridge -- of course I'd pay postage both ways. > > (I even have some original shipping boxes.) > > > > -----Original Message----- > > From: Warren Toomey [mailto:wkt at henry.cs.adfa.edu.au] > > Sent: Monday, January 29, 2001 8:44 PM > > To: PDP-11 Unix Preservation Society > > Subject: [pups] A bootable disk image for a PDP-11/34? > > > > > > He'd like a 6th Edition bootable RK05 disk image that he can download > > onto his real disk. > > > > Many thanks all! > > > > Warren > > Received: (from major at localhost) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id KAA25337 for pups-liszt; Wed, 31 Jan 2001 10:29:33 +1100 (EST) (envelope-from owner-pups at minnie.cs.adfa.edu.au) Received: from arundel.fortyfour.org (138bus2.tampabay.rr.com [24.94.138.2]) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id KAA25333 for ; Wed, 31 Jan 2001 10:29:30 +1100 (EST) (envelope-from kwellsch at tampabay.rr.com) Received: from tampabay.rr.com (localhost [127.0.0.1]) by arundel.fortyfour.org (8.11.0/8.11.0) with ESMTP id f0UNRuR29214; Tue, 30 Jan 2001 18:27:56 -0500 (EST) Message-ID: <3A774DFC.8A3260E8 at tampabay.rr.com> Date: Tue, 30 Jan 2001 18:27:56 -0500 From: Ken Wellsch X-Mailer: Mozilla 4.76 [en] (X11; U; NetBSD 1.5.1_ALPHA i386) X-Accept-Language: en MIME-Version: 1.0 To: Ian King CC: pups at minnie.cs.adfa.edu.au Subject: Re: [pups] A bootable disk image for a PDP-11/34? References: <8D25F244B8274141B5D313CA4823F39C018EEB13 at red-msg-06.redmond.corp.microsoft.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-pups at minnie.cs.adfa.edu.au Precedence: bulk Hi Ian, Indeed, looks like there has been some bit rot on the archive... sigh. Luckily I am a pack rat and have copies of my Waterloo days data. The images are all clean there. Curiously enough I even found the directory where I ran that simulation (circa Oct/94 I see). I just rebuilt the code there and ran it on my NetBSD/i386 system and it boots V6 just fine. In case you don't read minds, after doing the 'attach ...' then 'boot rk0' the intuitive V6 boot prompt '@' is where you type 'rkunix' for example B^) Almost instantly I had a 'login:' prompt, and the image is off the tape so there is no root password set... Don't forget to type 'date' when logged in ... it is a hoot to see B^) Oh heck, never thought to actually try to set the date, post 2000... maybe better to let it live back in 1975... I've tar/gzip'ed the bundle. Do you want me to try and UUencode it and mail it to you? It is nearly 1 Mbyte in binary form... Oh yeah, as Warren mentioned, stock V6 does not run on a '34. I think it ran on a '40. I know it can run on a '34 because in 1980 I started using UNIX, V6 running on a '34 B^) Cheers, -- Ken Ian King wrote: > > Ken, I tried using that image and gunzip told me there was a crc error; it > wouldn't unzip it. (I downloaded it three times, just in case there was a > transmission error -- twice by ftp, once by http.) I've also tried the > "Dennis" images, which are supposedly straight RK05 images; E11 won't boot > 'em. One issue on which I'm not clear: where is the boot address? Stuff at > loc 0 doesn't look like boot instructions. > > If I could get an image to run in an emulator (as I mentioned, I'm running > E11 from DBit), I'd write some cheesy little loader to bring it down the > serial line (I already have it sketched out); but until I can at least get > one to boot in the emulator, I'm reluctant to spend the hours (at 9600 baud) > to spray it onto a disk. > > Any suggestions you may have would be greatly appreciated. -- Ian Received: (from major at localhost) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id KAA25365 for pups-liszt; Wed, 31 Jan 2001 10:32:27 +1100 (EST) (envelope-from owner-pups at minnie.cs.adfa.edu.au) Received: from chiton.ucsd.edu (chiton.ucsd.edu [192.135.238.128]) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id KAA25361 for ; Wed, 31 Jan 2001 10:32:23 +1100 (EST) (envelope-from cdl at mpl.ucsd.edu) Received: (from cdl at localhost) by chiton.ucsd.edu (8.9.3/8.9.3) id PAA29420; Tue, 30 Jan 2001 15:30:55 -0800 (PST) Date: Tue, 30 Jan 2001 15:30:55 -0800 (PST) From: Carl Lowenstein Message-Id: <200101302330.PAA29420 at chiton.ucsd.edu> To: wkt at cs.adfa.edu.au Subject: Re: [pups] A bootable disk image for a PDP-11/34? Cc: pups at minnie.cs.adfa.edu.au Sender: owner-pups at minnie.cs.adfa.edu.au Precedence: bulk > From wkt at henry.cs.adfa.edu.au Tue Jan 30 14:16 PST 2001 > From: Warren Toomey > Subject: Re: [pups] A bootable disk image for a PDP-11/34? > To: Carl Lowenstein > Date: Wed, 31 Jan 2001 09:13:30 +1100 (EST) > CC: pups at minnie.cs.adfa.edu.au > MIME-Version: 1.0 > Content-Transfer-Encoding: 7bit > > In article by Carl Lowenstein: > > Just from the historical point of view, note that the first major > > file on a genuine 6th Edition distribution tape _is_ a bootable > > RK05 image. Something like 4000 blocks. > > > > carl > > Yes, but it doesn't boot on an 11/34 :( > That's the problem. > > Cheers, > Warren Why, said he wonderingly. Is the 11/34 one of those machines that does not have a directly addressable PSW at 177776 so it must be done with MPTS and MFPS instructions? Thats all I can think of immediately. Pulling out my handy PDP-11 architecture handbook, I find this to be so. There are some other differences between 11/34 and 11/40-45 but this one would be a real show-stopper. The modifications to 6th Ed. Unix to take care of this would be concentrated in the save/raise/lower processor priority routines. Just offhand I don't think one could make a zero-length binary patch that would work on the 11/34 and remain 11/40-45 compatible. I guess I will look at locore.s tonight when I get home. That must be the place where such things happen. I wonder what the RT-11 guys did when they had the same problem. I seem to remember something involving creative use of stack pushes and RTI instructions to set the processor priority. carl Received: (from major at localhost) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id KAA25390 for pups-liszt; Wed, 31 Jan 2001 10:35:01 +1100 (EST) (envelope-from owner-pups at minnie.cs.adfa.edu.au) Received: from chalfont.mail.uk.easynet.net (chalfont.mail.uk.easynet.net [195.40.1.44]) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id KAA25383 for ; Wed, 31 Jan 2001 10:34:57 +1100 (EST) (envelope-from rdonkin at bigfoot.com) Received: from bigfoot.com (dsl-212-135-223-35.dsl.easynet.co.uk [212.135.223.35]) by chalfont.mail.uk.easynet.net (Postfix) with ESMTP id 45018F8357; Tue, 30 Jan 2001 23:32:11 +0000 (GMT) Message-ID: <3A774F2E.46106B82 at bigfoot.com> Date: Tue, 30 Jan 2001 23:33:02 +0000 From: Richard Donkin X-Mailer: Mozilla 4.76 [en] (X11; U; Linux 2.2.14-15mdk i586) X-Accept-Language: en, fr MIME-Version: 1.0 To: Mark Green Cc: PUPS List Subject: Re: [pups] 2.11 BSD compilation fails References: <20010130160418Z433530-3339+182 at scapa.cs.ualberta.ca> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-pups at minnie.cs.adfa.edu.au Precedence: bulk Mark Green wrote: > > > > > While tinkering with the date2.c program posted earlier by Alex > > Chupakhin, which now runs on 2.11 BSD btw, I discovered the following: > > > > - 'cc -o date2 date2.c' works fine, producing a 12K binary > > > > - a makefile containing this command fails - the compilation starts but > > fails silently, producing a 2K binary that is not marked executable. > > The makefile is: > > > > date2: date2.c > > cc -o date2 -c date2.c > Remove the -c flag, it tells the compiler to only compile the program > and not produce an executable. Ooops... I must have been up too late when I came up with that one. Thanks Richard Received: (from major at localhost) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id MAA26019 for pups-liszt; Wed, 31 Jan 2001 12:46:59 +1100 (EST) (envelope-from owner-pups at minnie.cs.adfa.edu.au) Received: from mailhost.cs.uofs.edu (mailhost.cs.uofs.edu [134.198.169.1]) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id MAA26015 for ; Wed, 31 Jan 2001 12:46:54 +1100 (EST) (envelope-from bill at cs.uofs.edu) Received: from triangle.cs.uofs.edu (IDENT:root at triangle.cs.uofs.edu [134.198.172.101]) by mailhost.cs.uofs.edu (8.9.3/8.9.2) with ESMTP id UAA37178 for ; Tue, 30 Jan 2001 20:45:59 -0500 (EST) Received: from localhost (bill at localhost) by triangle.cs.uofs.edu (8.9.3/8.8.6) with ESMTP id UAA03841 for ; Tue, 30 Jan 2001 20:45:24 -0500 X-Authentication-Warning: triangle.cs.uofs.edu: bill owned process doing -bs Date: Tue, 30 Jan 2001 20:45:20 -0500 (EST) From: Bill Gunshannon To: pups at minnie.cs.adfa.edu.au Subject: Re: [pups] A bootable disk image for a PDP-11/34? In-Reply-To: <3A774DFC.8A3260E8 at tampabay.rr.com> Message-ID: MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=US-ASCII Sender: owner-pups at minnie.cs.adfa.edu.au Precedence: bulk On Tue, 30 Jan 2001, Ken Wellsch wrote: > Don't forget to type 'date' when logged in ... it is a hoot to see B^) > > Oh heck, never thought to actually try to set the date, post 2000... > maybe better to let it live back in 1975... > I assume it is just like Ultrix-11 was, soooooo Here's a quick way to get the date right until you get a chance to install a fixed "date" command. Yes, it is only the date command that is not Y2K ready. First: Set the date to 9912312359 Second: wait one minute. It is now 1 Jan 2000. Third: Set the date to 12312359 Fourth: wait one minute. It is now 1 Jan 2001. Fifth: Set the month, day, hour and minute to the current time. Voila. Primitive, but it works. I guess I could try building the GNU date command on Ultrix-11 or maybe just get the sources from FreeBSD. All the best. bill -- Bill Gunshannon | de-moc-ra-cy (di mok' ra see) n. Three wolves bill at cs.scranton.edu | and a sheep voting on what's for dinner. University of Scranton | Scranton, Pennsylvania | #include Received: (from major at localhost) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id SAA27811 for pups-liszt; Wed, 31 Jan 2001 18:07:33 +1100 (EST) (envelope-from owner-pups at minnie.cs.adfa.edu.au) Received: from mail3.microsoft.com (mail3.microsoft.com [131.107.3.123]) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with SMTP id SAA27807 for ; Wed, 31 Jan 2001 18:07:29 +1100 (EST) (envelope-from iking at microsoft.com) Received: from 157.54.9.100 by mail3.microsoft.com (InterScan E-Mail VirusWall NT); Tue, 30 Jan 2001 23:03:00 -0800 (Pacific Standard Time) Received: by inet-imc-03.redmond.corp.microsoft.com with Internet Mail Service (5.5.2653.19) id ; Tue, 30 Jan 2001 22:59:19 -0800 Message-ID: <8D25F244B8274141B5D313CA4823F39C018EEB1A at red-msg-06.redmond.corp.microsoft.com> From: Ian King To: "'Carl Lowenstein'" , wkt at cs.adfa.edu.au Cc: pups at minnie.cs.adfa.edu.au Subject: RE: [pups] A bootable disk image for a PDP-11/34? Date: Tue, 30 Jan 2001 22:58:53 -0800 X-Mailer: Internet Mail Service (5.5.2653.19) Sender: owner-pups at minnie.cs.adfa.edu.au Precedence: bulk Again, I'd be glad to do things like this, if I could get an image to run on an emulator -- that's been a goal. I've tried various 'processors' (in emulation), but not been successful at booting the Unix kernel. Can anyone say, "I booted image X on emulator Y and had a successfully running Unix"? If so, please please please share your experience -- I haven't been able to boot anything out of the PUPS archive on the E11 emulator (held out by some to be the best). And, if/when I have success, I promise to share a field report. :-) -- Ian -----Original Message----- From: Carl Lowenstein [mailto:cdl@mpl.ucsd.edu] Sent: Tuesday, January 30, 2001 3:31 PM To: wkt at cs.adfa.edu.au Cc: pups at minnie.cs.adfa.edu.au Subject: Re: [pups] A bootable disk image for a PDP-11/34? > From wkt at henry.cs.adfa.edu.au Tue Jan 30 14:16 PST 2001 > From: Warren Toomey > Subject: Re: [pups] A bootable disk image for a PDP-11/34? > To: Carl Lowenstein > Date: Wed, 31 Jan 2001 09:13:30 +1100 (EST) > CC: pups at minnie.cs.adfa.edu.au > MIME-Version: 1.0 > Content-Transfer-Encoding: 7bit > > In article by Carl Lowenstein: > > Just from the historical point of view, note that the first major > > file on a genuine 6th Edition distribution tape _is_ a bootable > > RK05 image. Something like 4000 blocks. > > > > carl > > Yes, but it doesn't boot on an 11/34 :( > That's the problem. > > Cheers, > Warren Why, said he wonderingly. Is the 11/34 one of those machines that does not have a directly addressable PSW at 177776 so it must be done with MPTS and MFPS instructions? Thats all I can think of immediately. Pulling out my handy PDP-11 architecture handbook, I find this to be so. There are some other differences between 11/34 and 11/40-45 but this one would be a real show-stopper. The modifications to 6th Ed. Unix to take care of this would be concentrated in the save/raise/lower processor priority routines. Just offhand I don't think one could make a zero-length binary patch that would work on the 11/34 and remain 11/40-45 compatible. I guess I will look at locore.s tonight when I get home. That must be the place where such things happen. I wonder what the RT-11 guys did when they had the same problem. I seem to remember something involving creative use of stack pushes and RTI instructions to set the processor priority. carl Received: (from major at localhost) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id SAA27852 for pups-liszt; Wed, 31 Jan 2001 18:13:33 +1100 (EST) (envelope-from owner-pups at minnie.cs.adfa.edu.au) Received: from mail3.microsoft.com (mail3.microsoft.com [131.107.3.123]) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with SMTP id SAA27848 for ; Wed, 31 Jan 2001 18:13:30 +1100 (EST) (envelope-from iking at microsoft.com) Received: from 157.54.9.100 by mail3.microsoft.com (InterScan E-Mail VirusWall NT); Tue, 30 Jan 2001 23:04:36 -0800 (Pacific Standard Time) Received: by inet-imc-03.redmond.corp.microsoft.com with Internet Mail Service (5.5.2653.19) id ; Tue, 30 Jan 2001 23:05:48 -0800 Message-ID: <8D25F244B8274141B5D313CA4823F39C018EEB1C at red-msg-06.redmond.corp.microsoft.com> From: Ian King To: "'Ken Wellsch'" Cc: pups at minnie.cs.adfa.edu.au Subject: RE: [pups] A bootable disk image for a PDP-11/34? Date: Tue, 30 Jan 2001 23:05:55 -0800 X-Mailer: Internet Mail Service (5.5.2653.19) Sender: owner-pups at minnie.cs.adfa.edu.au Precedence: bulk Ken, if you send it to my personal email account, there's no size restriction (I run the mail server); it's iking at killthewabbit.org. I would greatly appreciate your sending it to me. BTW, I've been using 1977 (the year I graduated fron high school) on my PDP-11 under RSX-11; some tools won't accept the "01" year. :-) Cheers -- isk PS: I've hired a lot of Waterloo folks -- smart buggers, the lot of them. :-) -----Original Message----- From: Ken Wellsch [mailto:kwellsch@tampabay.rr.com] Sent: Tuesday, January 30, 2001 3:28 PM To: Ian King Cc: pups at minnie.cs.adfa.edu.au Subject: Re: [pups] A bootable disk image for a PDP-11/34? Hi Ian, Indeed, looks like there has been some bit rot on the archive... sigh. Luckily I am a pack rat and have copies of my Waterloo days data. The images are all clean there. Curiously enough I even found the directory where I ran that simulation (circa Oct/94 I see). I just rebuilt the code there and ran it on my NetBSD/i386 system and it boots V6 just fine. In case you don't read minds, after doing the 'attach ...' then 'boot rk0' the intuitive V6 boot prompt '@' is where you type 'rkunix' for example B^) Almost instantly I had a 'login:' prompt, and the image is off the tape so there is no root password set... Don't forget to type 'date' when logged in ... it is a hoot to see B^) Oh heck, never thought to actually try to set the date, post 2000... maybe better to let it live back in 1975... I've tar/gzip'ed the bundle. Do you want me to try and UUencode it and mail it to you? It is nearly 1 Mbyte in binary form... Oh yeah, as Warren mentioned, stock V6 does not run on a '34. I think it ran on a '40. I know it can run on a '34 because in 1980 I started using UNIX, V6 running on a '34 B^) Cheers, -- Ken Ian King wrote: > > Ken, I tried using that image and gunzip told me there was a crc error; it > wouldn't unzip it. (I downloaded it three times, just in case there was a > transmission error -- twice by ftp, once by http.) I've also tried the > "Dennis" images, which are supposedly straight RK05 images; E11 won't boot > 'em. One issue on which I'm not clear: where is the boot address? Stuff at > loc 0 doesn't look like boot instructions. > > If I could get an image to run in an emulator (as I mentioned, I'm running > E11 from DBit), I'd write some cheesy little loader to bring it down the > serial line (I already have it sketched out); but until I can at least get > one to boot in the emulator, I'm reluctant to spend the hours (at 9600 baud) > to spray it onto a disk. > > Any suggestions you may have would be greatly appreciated. -- Ian Received: (from major at localhost) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id AAA29613 for pups-liszt; Thu, 1 Feb 2001 00:21:49 +1100 (EST) (envelope-from owner-pups at minnie.cs.adfa.edu.au) Received: from arundel.fortyfour.org (138bus2.tampabay.rr.com [24.94.138.2]) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id AAA29604 for ; Thu, 1 Feb 2001 00:21:43 +1100 (EST) (envelope-from kwellsch at tampabay.rr.com) Received: from tampabay.rr.com (localhost [127.0.0.1]) by arundel.fortyfour.org (8.11.0/8.11.0) with ESMTP id f0VDK7R00577 for ; Wed, 31 Jan 2001 08:20:07 -0500 (EST) Message-ID: <3A781106.F7302A5A at tampabay.rr.com> Date: Wed, 31 Jan 2001 08:20:06 -0500 From: Ken Wellsch X-Mailer: Mozilla 4.76 [en] (X11; U; NetBSD 1.5.1_ALPHA i386) X-Accept-Language: en MIME-Version: 1.0 To: pups at minnie.cs.adfa.edu.au Subject: Re: [pups] A bootable disk image for a PDP-11/34? References: <8D25F244B8274141B5D313CA4823F39C018EEB13 at red-msg-06.redmond.corp.microsoft.com> Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-pups at minnie.cs.adfa.edu.au Precedence: bulk Ian King wrote: > > Ken, I tried using that image and gunzip told me there was a crc error; it > wouldn't unzip it. (I downloaded it three times, just in case there was a > transmission error -- twice by ftp, once by http.) So going over all the things I can easily do data integrity checks on, I've run 'gzip -tv' on all the GZip'ed things and found three that are apparently damaged: gzip: ./PDP-11/Distributions/dec/Ultrix-3.1/ultrix-3.1-bootape.tar.gz: invalid compressed data--crc error gzip: ./PDP-11/Distributions/research/Ken_Wellsch_v6/v6.tape.gz: invalid compressed data--crc error gzip: ./PDP-11/Distributions/unsw/90/record0.gz: invalid compressed data--crc error I can't comment on the *.Z compressed archives as they do not do any crc. I will have to peruse my stack of archive CD's made at various stages of the archive to see if I have the other two (I have a good 'v6.tape.gz' file). I did not try and run the MD5 list yet. But this is an example of why I had been pushing for the use of MD5 for all items in the archive... B^) -- Ken Received: (from major at localhost) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) id DAA30614 for pups-liszt; Thu, 1 Feb 2001 03:08:48 +1100 (EST) (envelope-from owner-pups at minnie.cs.adfa.edu.au) Received: from arundel.fortyfour.org (138bus2.tampabay.rr.com [24.94.138.2]) by minnie.cs.adfa.edu.au (8.9.3/8.9.3) with ESMTP id DAA30610 for ; Thu, 1 Feb 2001 03:08:43 +1100 (EST) (envelope-from kwellsch at tampabay.rr.com) Received: from tampabay.rr.com (localhost [127.0.0.1]) by arundel.fortyfour.org (8.11.0/8.11.0) with ESMTP id f0VG79R00768; Wed, 31 Jan 2001 11:07:10 -0500 (EST) Message-ID: <3A78382D.37188B15 at tampabay.rr.com> Date: Wed, 31 Jan 2001 11:07:09 -0500 From: Ken Wellsch X-Mailer: Mozilla 4.76 [en] (X11; U; NetBSD 1.5.1_ALPHA i386) X-Accept-Language: en MIME-Version: 1.0 To: Bill Gunshannon CC: pups at minnie.cs.adfa.edu.au Subject: Re: [pups] A bootable disk image for a PDP-11/34? References: Content-Type: text/plain; charset=us-ascii Content-Transfer-Encoding: 7bit Sender: owner-pups at minnie.cs.adfa.edu.au Precedence: bulk Bill Gunshannon wrote: > > On Tue, 30 Jan 2001, Ken Wellsch wrote: > > > Don't forget to type 'date' when logged in ... it is a hoot to see B^) > > > > Oh heck, never thought to actually try to set the date, post 2000... > > maybe better to let it live back in 1975... > > I assume it is just like Ultrix-11 was, soooooo > Here's a quick way to get the date right until you get a chance to > install a fixed "date" command. Yes, it is only the date command > that is not Y2K ready. No, V6 predates Ultrix-11 by just a bit I believe. The date setting format on V6 appears to be '1231245999', that is two digits for: month, day, hour, minute, year. A trailing 'p' means the hours are 12 based (and it is PM), otherwise 24 based. I can confirm as I expected that setting 0131110301 puts me at 1970 B^) No big deal. I can see in the 'date' source what it is doing... Thanks for the 'put it into the year 2001' method! -- Ken