On Sat, Dec 5, 2015 at 12:03 PM, Will Senn <will.senn at gmail.com> wrote:

> I am unable to boot from the RP06 disk that I installed into the boot
> block onto via:
> dd if=/usr/mdec/hpuboot of=/dev/rp0 count=1
>
​Doing this from memory as couple of issues:

1.) do an ls -l of /dev/*rp*  you need to use the raw (character) driver
not the blocked driver
2.) I believe the hp/rp driver is partitioned.   Make sure you use the
proper partition.​
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://minnie.tuhs.org/pipermail/tuhs/attachments/20151205/55f79aee/attachment.html>